Till innehåll på sidan
Till KTH:s startsida

Publikationer inom Tillverknings- och mätsystem

Här visas de senaste publikationerna från enheten för tillverknings- och mätsystem.

50 senaste publikationer i alla kategorier.

[1]
P. Dunaj et al., "Adaptive control of bearing stiffness for enhanced performance of spindle units," Precision engineering, vol. 102, s. 235-257, 2026.
[2]
D. Spensieri et al., "Automatic planning and optimization of a laser radar inspection system," International journal of computer integrated manufacturing (Print), vol. 39, no. 2, s. 303-317, 2026.
[3]
B. Iñigo et al., "Estimation and uncertainty assessment of TCP deflection under external loads in industrial robots for machining applications," CIRP annals, 2026.
[4]
V. Söderberg et al., "In situ- On Machine - Post Process Metrology System Design for Machining System Characterization," Journal of Machine Engineering, vol. 26, no. 1, s. 51-62, 2026.
[5]
V. Söderberg, R. Tomkowski och A. Archenti, "Industry-driven test piece methodology for multi-axis machining system assessment under production conditions," The International Journal of Advanced Manufacturing Technology, vol. 143, no. 7-8, s. 4263-4281, 2026.
[6]
V. Söderberg, "Machining system evaluation : Towards a standardized methodology for machiningtests and on-machine measurements," Doktorsavhandling Stockholm : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2026:13, 2026.
[7]
P. Majda et al., "Metrological constraints and uncertainty of tool deflection measurements in machine tools and articulated robots," Precision engineering, vol. 100, s. 705-726, 2026.
[8]
V. Söderberg et al., "Towards On-Machine Surface Metrology Using Image-Based Frequency Analysis for Surface Variation Analysis," Journal of Manufacturing and Materials Processing, vol. 10, no. 2, 2026.
[9]
E. Iunusova, "Towards Reliable Diagnostics Under Data Scarcity - Machine Learning for Manufacturing Equipment," Doktorsavhandling Sweden : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2026:12, 2026.
[10]
M. P. Tay et al., "A simulation-based decision support tool for circular manufacturing systems in the automotive industry using electric machines as a remanufacturing case study," International Journal of Production Research, vol. 63, no. 16, s. 5899-5918, 2025.
[11]
Y. Zhu et al., "Data-driven approaches for surface quality monitoring and prediction based on heterogeneous multi-channel signal fusion in hard part machining," Engineering applications of artificial intelligence, vol. 160, s. 111865-111865, 2025.
[12]
S. Dadbakhsh et al., "Effect of layer thickness in laser powder bed fusion of HWTS 50 hot work tool steel," CIRP annals, vol. 74, no. 1, s. 293-296, 2025.
[13]
M.-U. Rashid, R. Tomkowski och A. Archenti, "Extending tool life: High-dynamic stiffness nanocomposite coating for improved machining performance," Surface & Coatings Technology, vol. 515, 2025.
[14]
J. Chen et al., "Fabrication and development of mechanical metamaterials via additive manufacturing for biomedical applications : a review," International Journal of Extreme Manufacturing, vol. 7, no. 1, 2025.
[15]
E. Iunusova och A. Archenti, "Lab-to-Field Generalization Gap : Assessment of Transfer Learning for Bearing Fault Detection," Applied Sciences, vol. 15, no. 12, 2025.
[16]
Y. Zhu et al., "Leveraging classifier-guidance diffusion model for improved surface roughness prediction through synthesized audible sound signal," Procedia CIRP, vol. 134, s. 789-794, 2025.
[17]
M. K. Gonzalez Bassante, "On the Accuracy of Articulated Robots : A Comprehensive Approach to Evaluate and Improve Robot Accuracy for Contact Applications," Doktorsavhandling Stockholm : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2025:6, 2025.
[18]
S. Lerda et al., "Role of the preheating temperature during electron beam powder bed fusion (PBF-EB/M) in precipitation of γ' and carbides in Inconel 738 superalloy," Journal of Materials Research and Technology, vol. 37, s. 4639-4650, 2025.
[19]
P. Dunaj et al., "Stiffness-controlled lathe spindle for varying operating conditions," The International Journal of Advanced Manufacturing Technology, vol. 137, no. 9-10, s. 4521-4535, 2025.
[20]
M. Kovács, M. Gonzalez och A. Archenti, "Time-Series Data Curation : Design, Implementation, and Performance Evaluation of a General-Purpose Toolbox," IEEE Access, vol. 13, s. 193937-193955, 2025.
[21]
B. Ganesh et al., "Towards a Circular Solution for Healthcare Plastic Waste : Understanding the Legal, Operational, and Technological Landscape," Recycling, vol. 10, no. 1, 2025.
[22]
M. Gonzalez et al., "Transferability of compliance error compensation parameters in articulated robots," CIRP annals, vol. 74, no. 1, s. 667-671, 2025.
[23]
L. Zeyu et al., "A Systematic Approach to Optimize Parameters in Manufacturing Complex Lattice Structures of NiTi Using Electron Beam Powder Bed Fusion Process," Advanced Engineering Materials, vol. 26, no. 10, 2024.
[24]
D. Lipiński et al., "Experimental investigation and numerical analysis of material removal efficiency using abrasive microaggregates in grinding processes of Ti6Al4V," Precision engineering, vol. 91, s. 476-488, 2024.
[25]
M. Subasic et al., "Fatigue strength improvement of additively manufactured 316L stainless steel with high porosity through preloading," International Journal of Fatigue, vol. 180, 2024.
[26]
A. Archenti et al., "Integrated metrology for advanced manufacturing," CIRP annals, vol. 73, no. 2, s. 639-665, 2024.
[27]
J. Holmberg et al., "Machining of additively manufactured alloy 718 in as-built and heat-treated condition : surface integrity and cutting tool wear," The International Journal of Advanced Manufacturing Technology, vol. 130, no. 3-4, s. 1823-1842, 2024.
[28]
L. Bohdal et al., "Methods of Reducing Burrs in the Process of Cutting and Blanking Metal Materials," Rocznik Ochrona Srodowiska, vol. 26, s. 629-637, 2024.
[29]
P. Dunaj och A. Archenti, "Modeling the dynamic interaction between machine tools and their foundations," Precision engineering, vol. 89, s. 451-472, 2024.
[30]
Y. Zhu et al., "Surface quality prediction in-situ monitoring system: A deep transfer learning-based regression approach with audible signal," Manufacturing Letters, vol. 41, s. 1290-1299, 2024.
[31]
S. Amir et al., "Toward a Circular Economy: A Guiding Framework for Circular Supply Chain Implementation," i Springer Series in Supply Chain Management, : Springer Nature, 2024, s. 379-404.
[32]
N. Salehi et al., "Towards circular manufacturing systems implementation : An integrated analysis framework for circular supply chains," Sustainable Production and Consumption, vol. 51, s. 169-198, 2024.
[33]
M. Roci och A. Rashid, "Economic and environmental impact of circular business models : A case study of White Goods-as-a-Service using multi-method simulation modelling," Journal of Cleaner Production, vol. 407, 2023.
[34]
X. Zhao et al., "Effect of Scanning Strategy on Thermal Stresses and Strains during Electron Beam Melting of Inconel 625 : Experiment and Simulation," Materials, vol. 16, no. 1, 2023.
[35]
L. Zeyu, "Electron beam powder bed fusion of Nitinol : A development from production process window towards delicate structures," Doktorsavhandling : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2023:35, 2023.
[36]
M. Gonzalez et al., "Influence of the velocity on quasi-static deflections of industrial articulated robots," The International Journal of Advanced Manufacturing Technology, vol. 125, no. 3-4, s. 1429-1438, 2023.
[37]
S. Amir et al., "Towards circular economy : A guiding framework for circular supply chain implementation," Business Strategy and the Environment, vol. 32, no. 6, s. 2684-2701, 2023.
[38]
S. Kokare et al., "A comparative life cycle assessment of stretchable and rigid electronics : a case study of cardiac monitoring devices," International Journal of Environmental Science and Technology, vol. 19, no. 4, s. 3087-3102, 2022.
[39]
M. Yang, X. Bao och L. Zeyu, "A STUDY ON THE BASIC PRINCIPLES OF METAPHORICAL THINKING IN MYTHOLOGICAL LANGUAGE AND THE CHANGES OF EMOTIONAL BEHAVIOR," International Journal of Neuropsychopharmacology, vol. 25, no. SUPPL 1, s. A94-A94, 2022.
[40]
J. A. Marwitz et al., "Accuracy Assessment of Articulated Industrial Robots using the Extended- and the Loaded-Double-Ball-Bar," Journal of Machine Engineering, vol. 22, no. 2, s. 80-98, 2022.
[41]
X. Zhao, "Additive manufacturing of Ni-based Superalloys- an analysis of parameter and strategy driven properties in Electron Beam Melting Process," Doktorsavhandling Stockholm Sweden : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2022:16, 2022.
[42]
W. Yuan et al., "An Experimental Study of Micro-Dimpled Texture in Friction Control under Dry and Lubricated Conditions," Micromachines, vol. 13, no. 1, 2022.
[43]
A. de Giorgio et al., "Assessing the influence of expert video aid on assembly learning curves," Journal of manufacturing systems, vol. 62, s. 263-269, 2022.
[44]
M. Roci, "Circular Manufacturing Systems: Complex systems modelling and simulation for enhanced decision-making," Doktorsavhandling Stockholm : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2022:38, 2022.
[45]
L. Zeyu, S. Dadbakhsh och A. Rashid, "Developing processing windows for powder pre-heating in electron beam melting," Journal of Manufacturing Processes, vol. 83, s. 180-191, 2022.
[46]
X. Zhao et al., "Effect of scanning strategy on thermal stresses and strains during electron beam melting of Inconel 625: experiment and simulation," , 2022.
[47]
M.-U. Rashid, R. Tomkowski och A. Archenti, "Effect of Surface Pre-Treatment on the Adhesion between HiPIMS Thick Cu:CuCNx Coating and WC-Co Shim," Coatings, vol. 12, no. 10, 2022.
[48]
M. Roci et al., "Multi-method simulation modelling of circular manufacturing systems for enhanced decision-making," MethodsX, vol. 9, s. 101709-101709, 2022.
[49]
M. Gonzalez et al., "Online compliance error compensation system for industrial manipulators in contact applications," Robotics and Computer-Integrated Manufacturing, vol. 76, s. 102305-102305, 2022.
[50]
A. Malakizadi et al., "Post-processing of additively manufactured metallic alloys – A review," International journal of machine tools & manufacture, vol. 179, no. 103908, 2022.
Fullständig lista i KTH:s publikationsportal