Skip to main content

Method will reduce arsenic poisoning in Bangladesh

Published Oct 01, 2014

Millions of Bangladeshis could have access to drinking water free from dangerous levels of arsenic, thanks to a research team led by KTH Royal Institute of Technology.

Prosun Bhattacharya, Professor, Department of Sustainable Development, Environmental Science and Technology at KTH.

An international research team led by KTH Royal Institute of Technology has created an easy-to-use method for identifying aquifers with safe levels of arsenic, a mineral element that enters drinking water supplies from natural deposits in the earth or from agricultural and industrial practices. The tool is especially important in rural Bangladesh, where the water supply is mostly obtained by manually-operated hand pumps in tubewells installed by the communities themselves.

The secret to finding safe water lies in the colour of sediment obtained from test boring, says KTH professor Prosun Bhattacharya.

The researchers found that the colour of sediment obtained through test borings correlates to the concentration of arsenic found in the water. So, they created a simple scale of five colours based on the local drillers’ colour perception and Munsell’s colour system, which drillers can use to compare with sediment colours.

“When developing this method, we took into account three important aspects, namely the local water driller’s role and situation, the cost to drill for water and access to water with low amounts of arsenic,” Bhattacharya says.

The findings of the study were published by the Sustainable Arsenic Mitigation (SASMIT) project , which is led by KTH International Groundwater Arsenic Research Group (GARG).

The card drillers can use to compare colours with the sediments from test boring.

Every year millions of people in Bangladesh are exposed to dangerous levels of arsenic from drinking well water. A coordinated effort in the 1970s and 80s to reduce the scarcity of drinking water in the country led to the creation of millions of new wells. But in the 1990s, the water from many of these wells was found to contain unacceptable levels of arsenic.  

Arsenic winds up in the sediments in wells after it is transported from the Himalayas via the Ganges Brahmaputra-Meghnas river system. With no colour or aroma, it is difficult to detect without testing.

In the process of their work, the researchers also found that one need not drill particularly deep in order to find sufficient drinking water.

Conventional, “deep tube wells” extend as deep as 250 metres. But 120-metre “intermediate deep tube wells” are deep enough to tap into good drinking water with safe levels of arsenic and manganese. These also cost less to drill.

Besides the research advances, the SASMIT project also created 300 new wells that supply drinking water to 24,000 people.

The SASMIT research consortium includes Bhattacharya, Gunnar Jacks (professor emeritus with the Department of Sustainable Development at KTH) Mohammed Hossain (national coordinator of the SASMIT-project for the NGO Forum for Public Health in Bangladesh), Professors K. Matin Ahmed and M. Aziz Hasan (University of Dhaka, Bangladesh) and Mattias von Brömssen (Department head at Ramböll in Sweden).

Peter Larsson/David Callahan

Targeting arsenic at KTH

The KTH International Groundwater Arsenic Research Group (GARG) has been actively engaged in research on the topic since 1999. For the past 15 years, GARG is involved in research on the genesis of arsenic in groundwater, options for safe drinking water and management in different parts of the world  

Learn more about GARG here. 

For more information, contact Prosun Bhattacharya at +46 70 - 697 42 41, or prosun@kth.se