Skip to main content

Organic Hole-Transport Materials for Perovskite Solar Cells

Time: Wed 2020-09-30 10.00

Location: https://kth-se.zoom.us/webinar/register/WN_jafBUv0cRYyWbvtDwnehGA​, Stockholm (English)

Subject area: Chemistry

Doctoral student: Linqin Wang , Organisk kemi, KTH Royal Insititute of Technology, Prof. Licheng Sun's Group

Opponent: Professor Nam-Gyu Park, School of Chemical Engineering, Sungkyunkwan University, Suwon 440-746, Korea

Supervisor: Professor Licheng Sun, Molekylär elektronik, CMD, Kemi, Organisk kemi

Abstract

Research on perovskite solar cells (PSCs) has undergone dramatic development since the first cells were reported in 2009, and the past decade has witnessed a significant breakthrough on their power conversion efficiencies (PCEs) from 3.8% to 25%. However, the large-scale industrialization of PSCs is still far from an easy task, due to the scarcity of high-performance and low-cost organic hole-transport materials (HTMs). Thus, the development of new generation HTMs is highly desired.

The studies in this thesis aim at developing novel, inexpensive and easily synthesizable organic HTMs for application in efficient PSCs. A series of HTMs from small molecules to polymers, from doped to dopant-free were designed, synthesized and tested, to further improve the stability and reduce the cost.

In Chapter 1 and Chapter 2, a brief introduction to PSCs, HTMs as well as the characterization methods used in this thesis are presented.

In Chapter 3 and Chapter 4, the design and synthesis of a series of carbazole- based and spiro[fluorene-9,9'-xanthene] (SFX)-based HTMs is described. For these HTMs, the influence of substitution position, linking topology, pendant group and molecular size on the optical and electronic properties was systematically investigated, as well as their performance in solar cells.

In Chapter 5, two small molecular HTMs based on extended SFX skeletons were introduced for the application in dopant-free PSCs. The effect of the extended conjugation core unit and molecular size on the electrochemical and optical properties, hole mobility, conductivity, molecular packing and PSC performance was studied in detail.

In Chapter 6, a crosslinked SFX-based polymer was designed and synthesized as an efficient, low-cost, dopant-free HTM for conventional n-i-p type PSCs. The photoelectrochemical, optoelectronic and thermal properties of the designed polymer and the photovoltaic performance of the devices are discussed.

urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-279743

Page responsible:biblioteket@kth.se
Belongs to: News & Events
Last changed: Sep 18, 2020