Journal publications

Latest publications in peer-reviewed journals

2017

[1]
F. Ansari et al., "Experimental evaluation of anisotropy in injection molded polypropylene/wood fiber biocomposites," Composites. Part A, Applied science and manufacturing, vol. 96, pp. 147-154, 2017.
[2]
Y. Li et al., "Lignin-Retaining Transparent Wood," ChemSusChem, vol. 10, no. 17, pp. 3445-3451, 2017.
[3]
A. Liu, L. Medina and L. A. Berglund, "High-strength nanocomposite aerogels of ternary composition – polyvinyl alcohol, clay and cellulose nanofibrils," ACS Applied Materials & Interfaces, vol. 9, no. 7, pp. 6453-6461, 2017.

2016

[1]
F. Carosio et al., "Clay nanopaper as multifunctional brick and mortar fire protection coating : Wood case study," Materials & design, vol. 93, pp. 357-363, 2016.
[2]
K. Prakobna et al., "Mechanical performance and architecture of biocomposite honeycombs and foams from core–shell holocellulose nanofibers," Composites. Part A, Applied science and manufacturing, vol. 88, pp. 116-122, 2016.
[3]
F. Ansari et al., "Interface tailoring through covalent hydroxyl-epoxy bonds improves hygromechanical stability in nanocellulose materials," Composites Science And Technology, vol. 134, pp. 175-183, 2016.

2015

[1]
C. Djahedi, "Deformation of cellulose allomorphs studied by molecular dynamics," Licentiate thesis : KTH Royal Institute of Technology, TRITA-CHE-Report, 2015:20, 2015.
[2]
S. Galland et al., "Holocellulose nanofibers of high molar mass and small diameter for high-strength nanopaper," Biomacromolecules, vol. 16, no. 8, pp. 2427-2435, 2015.
[3]
K. Prakobna et al., "Core-shell cellulose nanofibers for biocomposites : Nanostructural effects in hydrated state," Carbohydrate Polymers, vol. 125, pp. 92-102, 2015.
[4]
K. Prakobna, S. Galland and L. A. Berglund, "High-Performance and Moisture-Stable Cellulose-Starch Nanocomposites Based on Bioinspired Core-Shell Nanofibers," Biomacromolecules, vol. 16, no. 3, pp. 904-912, 2015.
[5]
H. Tang, N. Butchosa and Q. Zhou, "A Transparent, Hazy, and Strong Macroscopic Ribbon of Oriented Cellulose Nanofibrils Bearing Poly(ethylene glycol)," Advanced Materials, vol. 27, no. 12, pp. 2070-2076, 2015.
[6]
F. Carosio et al., "Oriented Clay Nanopaper from Biobased Components Mechanisms for Superior Fire Protection Properties," ACS Applied Materials and Interfaces, vol. 7, no. 10, pp. 5847-5856, 2015.
[7]
K. Prakobna, "Biocomposites Based on Core-Shell Cellulose Nanofibers : Preparation, Structure, and Properties," Doctoral thesis Stockholm : KTH Royal Institute of Technology, TRITA-CHE-Report, 2015:18, 2015.
[9]
N. Ezekiel Mushi, S. Utsel and L. . A. Berglund, "Nanostructured biocomposite films of high toughness based on native chitin nanofibers and chitosan," Frontiers in Chemistry, vol. 18, no. 2, 2015.
[10]
C. Terenzi et al., "Nanostructural Effects on Polymer and Water Dynamics in Cellulose Biocomposites : H-2 and C-13 NMR Relaxometry," Biomacromolecules, vol. 16, no. 5, pp. 1506-1515, 2015.
[11]
F. Ansari, M. Skrifvars and L. Berglund, "Nanostructured biocomposites based on unsaturated polyester resin and a cellulose nanofiber network," Composites Science And Technology, vol. 117, pp. 298-306, 2015.
[12]
G. Josefsson et al., "Fibril orientation redistribution induced by stretching of cellulose nanofibril hydrogels," Journal of Applied Physics, vol. 117, no. 21, 2015.
[13]
H. Soeta et al., "Low-Birefringent and Highly Tough Nanocellulose-Reinforced Cellulose Triacetate," ACS Applied Materials and Interfaces, vol. 7, no. 20, pp. 11041-11046, 2015.
[14]
N. Keshavarzi et al., "Nanocellulose-Zeolite Composite Films for Odor Elimination," ACS Applied Materials and Interfaces, vol. 7, no. 26, pp. 14254-14262, 2015.
[15]
K. Prakobna et al., "Strong reinforcing effects from galactoglucomannan hemicellulose on mechanical behavior of wet cellulose nanofiber gels," Journal of Materials Science, vol. 50, no. 22, pp. 7413-7423, 2015.

2014

[1]
N. Butchosa and Q. Zhou, "Water redispersible nanofibrillated cellulose adsorbed with carboxymethyl cellulose," Abstract of Papers of the American Chemical Society, vol. 247, pp. 130-CELL, 2014.
[2]
K.-Y. Lee et al., "On the use of nanocellulose as reinforcement in polymer matrix composites," Composites Science And Technology, vol. 105, pp. 15-27, 2014.
[3]
N. E. Mushi, "Chitin nanofibers, networks and composites : Preparation, structure and mechanical properties," Doctoral thesis Stockholm : KTH Royal Institute of Technology, TRITA-CHE-Report, 2014:43, 2014.
[4]
N. Butchosa and Q. Zhou, "Water redispersible cellulose nanofibrils adsorbed with carboxymethyl cellulose," Cellulose (London), vol. 21, no. 6, pp. 4349-4358, 2014.
[5]
N. Butchosa Robles, "Tailoring Cellulose Nanofibrils for Advanced Materials," Doctoral thesis Stockholm : KTH Royal Institute of Technology, TRITA-CHE-Report, 2014:52, 2014.
[6]
A. E. Donius et al., "Superior mechanical performance of highly porous, anisotropic nanocellulose-montmorillonite aerogels prepared by freeze casting," Journal of The Mechanical Behavior of Biomedical Materials, vol. 37, pp. 88-99, 2014.
[7]
P. A. Larsson, L. A. Berglund and L. Wågberg, "Ductile All-Cellulose Nanocomposite Films Fabricated from Core-Shell Structured Cellulose Nanofibrils," Biomacromolecules, vol. 15, no. 6, pp. 2218-2223, 2014.
[8]
J.-M. Malho et al., "Formation of ceramophilic chitin and biohybrid materials enabled by a genetically engineered bifunctional protein," Chemical Communications, vol. 50, no. 55, pp. 7348-7351, 2014.
[9]
[11]
N. Ezekiel Mushi et al., "Nanopaper membranes from chitin-protein composite nanofibers : Structure and mechanical properties," Journal of Applied Polymer Science, vol. 131, no. 7, pp. 40121, 2014.
[12]
G. Cunha et al., "Preparation of Double Pickering Emulsions Stabilized by Chemically Tailored Nanocelluloses," Langmuir, vol. 30, no. 31, pp. 9327-9335, 2014.
[13]
Y. Wang et al., "Molecular dynamics simulation of strong interaction mechanisms at wet interfaces in clay-polysaccharide nanocomposites," Journal of Materials Chemistry A, vol. 2, no. 25, pp. 9541-9547, 2014.
[14]
F. Ansari et al., "Cellulose nanofiber network for moisture stable, strong and ductile biocomposites and increased epoxy curing rate," Composites. Part A, Applied science and manufacturing, vol. 63, pp. 35-44, 2014.
[15]
A. M. Stepan et al., "Nanofibrillated cellulose reinforced acetylated arabinoxylan films," Composites Science And Technology, vol. 98, pp. 72-78, 2014.
[16]
A. Cobut, H. Sehaqui and L. A. Berglund, "Cellulose Nanocomposites by Melt Compounding of TEMPO-Treated Wood Fibers in Thermoplastic Starch Matrix," BioResources, vol. 9, no. 2, pp. 3276-3289, 2014.
[18]
M. Peltzer et al., "Surface modification of cellulose nanocrystals by grafting with poly(lactic acid)," Polymer international, vol. 63, no. 6, pp. 1056-1062, 2014.
[19]
[21]
P. A. Larsson, L. A. Berglund and L. Wågberg, "Highly ductile fibres and sheets by core-shell structuring of the cellulose nanofibrils," Cellulose (London), vol. 21, no. 1, pp. 323-333, 2014.
[22]
S. Galland et al., "UV-Cured Cellulose Nanofiber Composites with Moisture Durable Oxygen Barrier Properties," Journal of Applied Polymer Science, vol. 131, no. 16, pp. 40604, 2014.
[23]
S. Galland et al., "Strong and Moldable Cellulose Magnets with High Ferrite Nanoparticle Content," ACS Applied Materials and Interfaces, vol. 6, no. 22, pp. 20524-20534, 2014.

2013

[2]
J. Joby Kochumalayil et al., "Regioselective modification of a xyloglucan hemicellulose for high-performance biopolymer barrier films," Carbohydrate Polymers, vol. 93, no. 2, pp. 466-472, 2013.
[4]
I. Bjurhager et al., "Mechanical performance of yew (Taxus baccata L.) from a longbow perspective," Holzforschung, vol. 67, no. 7, pp. 763-770, 2013.
[5]
H. Liimatainen et al., "High-Strength Nanocellulose-Talc Hybrid Barrier Films," ACS Applied Materials and Interfaces, vol. 5, no. 24, pp. 13412-13418, 2013.
[6]
[7]
[9]
M. Salajkova et al., "Tough nanopaper structures based on cellulose nanofibers and carbon nanotubes," Composites Science And Technology, vol. 87, pp. 103-110, 2013.
[10]
M. Salajkova, "Wood Nanocellulose Materials and Effects from Surface Modification of Nanoparticles," Doctoral thesis Stockholm : KTH Royal Institute of Technology, Trita-CHE-Report, 2013:40, 2013.
[11]
P. A. Larsson, J. J. Kochumalayil and L. Wågberg, "Oxygen and water vapour barrier films with low moisture sensitivity fabricated from self-crosslinking fibrillated cellulose," in Advances in pulp and paper research, Cambridge 2013 : transactions of the 15th Fundamental Research Symposium held in Cambridge: September 2013, 2013, pp. 851-866.
[12]
S. Galland, "Compression-moulded and multifunctional cellulose network materials," Doctoral thesis Stockholm : KTH Royal Institute of Technology, Trita-CHE-Report, 2013:45, 2013.
Top page top