Mihai Nicolescu

Professor Emeritus

Contact

Telephone: +46(0)8-790 8905

Fax: 08-21 08 51

E-mail: gmni@kth.se 

Education

1998

Docent

Industrial Engineering, Royal Institute of Technology

Stockholm, Sweden

1991

Doctoral Student

Industrial Engineering, Royal Institute of Technology

Stockholm, Sweden

1971

M.Sc

University of Timisoara

Timisoara, Romania

Publications

  1. Amir Rashid, Cornel Mihai Nicolescu: "Pallet System for Flexible manufacturing", 2006, XI Congress of Vibration, St. Petersburg.

  2. Cornel Mihai Nicolescu, Venturia Chiroiu: "On the modeling the damping across the length scale", Proceedings of the Annual Symposium of the ISM, May 15/16 2006

  3. C.M. Nicolescu, Ligia Munteanu: "On a finger model actuated with shape memory alloy artificial muscles", Advanced in Robot Dynamics and Control, 2006
  4. Ptere Stiuca, C.M. Nicolescu: "On the mechanical behaviour of Nanostructered Materials", Chapter 12, Topics in Solid Mechanics, EAR, 2006
  5. C.M. Nicolescu, Traian Badea: “On the modeling the camping across the length scales”, Proceedings of the Annual Symposium of the ISM”, 2006
  6. Amir Rashid, CM Nicolescu: "Active control of palette systems", 2005 Journal of Material Processing)
  7. Zhang Qingying1, Yue Weihong1, Cornel-Mihai Nicolescu: "RESEARCH ON MACHINE VISION ON-LINE MEASUREMENT SYSTEM BASED ON MULTI-SENSOR FUSION TECHNOLOGY", THE EIGHTH WORLD CONFERENCE ON INTEGRATED DESIGN PROCESS TECHNOLOGY, 2006, Bejing, China.
  8. Veturia Chiroiu, C.M. Nicolescu: "A shape description model by using sensor data from touch", Fourth Symposium on Multibody Dynamics and vibration of the 19Biennial Conference on mechanical Vibration and Noise, September 2-6, 2006, Chicago, Il. USA.
  9. Amir Rashid, Cornel Mihai Nicolescu: "Active vibration control in palletized workholding system for milling", International Journal of Machine Tools and Manufacture, January, 2006.
  10. Daghini, L., Nicolescu, C.M.: “Design of Compact Vibration Damping Turret with Hydrostatic Clamping System for Hard to Machine Materials”, peer-reviewed conference contribution to the Swedish Production Symposium 2008, Stockholm, Sweden, 2008, TRITA-IIP-08- 15
  11. Daghini, L.: “Theoretical and Experimental Study of Tooling Systems – Passive Control of Machining Vibration”, Licentiate Thesis in Production Engineering at the Royal Institute of Technology, KTH Production Engineering, Stockholm, Sweden TRITA-IIP-08-04, ISSN 1650-1888
  12. Daghini, L., Nicolescu, C.M.: “Characteristics and Stability Analysis of Tooling Systems with Enhanced Damping”, peer-reviewed conference contribution to the Process Machine Interaction, Hannover, Germany, 2008, TRITA-IIP-08-10
  13. Gerth, J., Werner, M., Larsson, M., Nicolescu, M.: “Reproducing wear mechanisms in gear hobbing – evaluation of a single insert milling test”, Wear, 2008, ISSN 0043-1648
  14. Archenti, A., Nicolescu, C.M.: “Evaluation of machining system dynamic stiffness”, peer-reviewed conference contribution to the Swedish Production Symposium, Gothenburg, Sweden, 2007, TRITA-IIP-07-05
  15. Archenti, A., Nicolescu, C.M.: “Evaluation of machining system dynamic stiffness”, peer-reviewed conference contribution to the Swedish Production Symposium, Gothenburg, Sweden, 2007, TRITA-IIP-07-04
  16. Archenti, A: “Tester av maskinbearbetningssytem – Statiska och dynamiska analyser” Master of Science Thesis at the Royal Institute of Technology, KTH Production Engineering, Stockholm, Sweden, 2007, 2007:277
  17. Berglund, A., Nicolescu, C.M.: “Investigation of the Effect of Microstructures on CGI Machining”, peer-reviewed conference contribution to the Swedish Production Symposium, Gothenburg, Sweden, 2007, TRITA-IIP-07-06
  18. Daghini, L., Nicolescu, C.M.: “Influence of inserts coating and substrate on TOOLOX 44 machining”, peer-reviewed conference contribution to the Swedish Production Symposium 2007, Gothenburg, Sweden, 2007, TRITA-IIP-07-07
  19. Werner, M.; “Analysis of cutting mechanisms in machining of gears”, peer-reviewed conference contribution to the Swedish Production Symposium 2007, Gothenburg; Sweden, 2007
  20. Werner, M., Micolescu, M.: “Gear production industry relevant research issues”, Internal report, 2007
  21. Berglund, A: “Skärande bearbetning av kompaktgrafitjärn” Master of Science Thesis at the Royal Institute of Technology, KTH Production Engineering, Stockholm, Sweden, 2005, 2005:213
  22. Daghini, L.: “Konstruktion av vibrationsdämpande avstickningsverktygshållare” Master of Science Thesis at the Royal Institute of Technology, KTH Production Engineering, Stockholm, Sweden, 2005, 2005:212
  23. Varun Navayar, Cornel Mihai Nicolescu: "Analys of Dynamic behavior of Boring Tool Holders", Journal of Materials processing, 2007
  24. Archenti A, Nicolescu, C.M.: "Evaluation of Machining System Dynamic Stiffness", SPP Conference, Göteborg, 2007
  25. Amir Rashid, Cornel Mihai Nicolescu: "Design and implementation of tuned viscoelastic dampers for vibration control in milling", International Journal of Machine Tools and Manufacture, January, 2008
  26. Werner, M.: “Relationships between properties of materials and segmentation of chips during turning”, Master of Science Thesis at the Royal Institute of Technology, KTH Production Engineering, Stockholm, Sweden, 2005, SRN KTH/MSE 05/83 SE NEK/EX
  27. Daghini, L., Archenti, A., Nicolescu, C.M.: “Design, implementation and analysis of composite material dampers for turning operations”, the peer-reviewed conference ICME 2009: International Conference on Mechanical Engineering”, Tokyo, Japan, 2009
  28. Archenti, A., Nicolescu M.: “Loaded Double Ball Bar for capability testing of NC machine tools”, Submitted to journal: Mechanical system and signal processing, 2009
  29. Nicolescu, C. M., Archenti, A., Lundholm, T.: “Model-based identification of process-machine interaction dynamics in face milling of prehardened steel”, Submitted to Materials processing, 2009
  30. Berglund, A, Nicolescu, C.M., Svensson, H.: “The effect of interlamellar distance in pearlite on CGI machining”, Conference ICME 2009: International Conference on Mechanical Engineering”, Tokyo, Japan, 2009
  31. Daghini, L., Archenti, A., Nicolescu, C. M.: “Design, implementation and Analysis of composite material dampers for turning operations”, submitted to the peer-reviewed conference ICME 2009: International Conference on Mechanical Engineering”, Tokyo, Japan, 2009
  32. Werner, M., Nicolescu, C. M., Lindberg, B.: “A comparative study of cutting mechanisms in hobbing and single tooth milling”, 2009
  33. Werner, M., Nicolescu, C. M., Lindberg, B.: “Influence of polished tool surfaces on single tooth milling test”, 2009
  34. Werner, M., Nicolescu, C. M.: “Design and development of a dynamometer for cutting force measurement in hobbing”, 2009
  35. Grenmyr, G., Berglund, T., Nicolescu, M.: "Investigation of Tool Wear Mechanisms in CGI Machining", IJMF-MM16-08, 2009

Books:

  • A. Jarfors, M. Nicolescu: “Manufacturing technology",1999, Studentlitteratur, Lund
  • Cornel Mihai Nicolescu, Daniel Tesfamariam: "Production management", 2004, KTH
  • Topics in Applied Mechanics, Chapter 1, "A preisach model of hysteretic behaviour of nonlinear mesocopic elastic material", 2003
  • "Capability Analysis, Static and Dynamic behaviour of Machining System" - E-learning 2008
Page responsible:infomaster@itm.kth.se
Belongs to: Department of Production Engineering
Last changed: Feb 11, 2019