Skip to main content

Publications

Publications are presented by the categories: journal articles, books & book chapters, conference papers, other manuscripts and student thesis.

Journal articles

[1]
S. Ju et al., "System development for establishing shipyard mid-term production plans using backward process-centric simulation," International Journal of Naval Architecture and Ocean Engineering, vol. 12, pp. 20-37, 2020.
[2]
M. G. Gebreslassie et al., "Characterization of Municipal Solid waste’s Potential for Power Generation at Mekelle City as a Waste Minimisation strategy," International Journal of Sustainable Engineering, vol. 13, no. 1, pp. 68-75, 2020.
[3]
S. E. Birkie and P. Trucco, "Do not expect others do what you should! Supply chain complexity and mitigation of the ripple effect of disruptions," The International Journal of Logistics Management, vol. 31, no. 1, pp. 123-144, 2020.
[4]
B. Kim, Y. Jeong and J. G. Shin, "Spatial arrangement using deep reinforcement learning to minimise rearrangement in ship block stockyards," International Journal of Production Research, pp. 1-15, 2020.
[5]
R. Tripney, T. Backström and M. Bellgran, "Critical Psychosocial Risk Treatment for Engineers and Technicians," World Academy of Science, Engineering and Technology : An International Journal of Science, Engineering and Technology, vol. 13, no. 8, pp. 1070-1083, 2019.
[6]
M. Bellgran, M. Kurdve and R. Hanna, "Cost driven Green Kaizen in pharmaceutical production : Creating positive engagement for environmental improvements," Procedia CIRP 81, vol. 81, pp. 1219-1224, 2019.
[7]
T. Fagerlind et al., "The distribution of sustainability decision-making in manufacturing networks," Sustainability, vol. 11, no. 18, 2019.
[8]
M. Zafarzadeh et al., "Data-Driven Production Logistics - An Industrial Case Study on Potential and Challenges," Smart and Sustainable Manufacturing Systems, vol. 3, no. 1, pp. 53-78, 2019.
[9]
E. Flores-Garcia et al., "Decision-making approaches in process innovations : an explorative case study," Journal of Manufacturing Technology Management, 2019.
[10]
E. Flores-Garcia et al., "Challenges of Discrete Event Simulation in the Early Stages of Production System Design," International journal of industrial engineering, vol. 26, no. 5, pp. 819-834, 2019.
[11]
M. Alemani, J. Wahlström and U. Olofsson, "On the influence of car brake system parameters on particulate matter emissions," Wear, vol. 396, pp. 67-74, 2018.
[12]
F. Norouzilame and M. Wiktorsson, "Coordination within International Manufacturing Networks : A Comparative Study of Three Industrial Practices," American Journal of Industrial and Business Management, vol. 8, no. 6, pp. 1603-1623, 2018.
[13]
[14]
S. E. Birkie, P. Trucco and M. Kaulio, "Sustaining performance under operational turbulence: the role of lean in engineer-to-order operations," International Journal of Lean Six Sigma, vol. 8, no. 4, pp. 457-481, 2017.
[16]
L. Crevani, K. Palm and A. Schilling, "Innovation management in service firms : a research agenda," Service Business, vol. 5, no. 2, pp. 177-193, 2011.

Books and Book chapters

[1]
S. Shahbazi, M. Wiktorsson and M. Kurdve, "Using the Green Performance Map: Towards Material Efficiency Measurement," in Operations Management and Sustainability - New Research Perspectives, Luitzen de Boer, Poul Houman Andersen Ed., : Palgrave Macmillan, 2019.
[2]
G. Johansson, E. Sundin and M. Wiktorsson, Sustainable Manufacturing : Why and how to improve environmental performance. 1st ed. Lund : Studentlitteratur AB, 2019.
[3]
C. Zhang et al., "A Serious Logistical Game of Paediatric Emergency Medicine : Proposed Scoring Mechanism and Pilot Test," in Games and Learning Alliance, Antonios Liapis; Georgios N. Yannakakis; Manuel Gentile; Manuel Ninaus Ed., : Springer Publishing Company, 2019, pp. 468-478.
[4]
M. Lange and A. Imsdahl, "Modular Function Deployment : Using Module Drivers to Impart Strategies to a Product Architecture," in Advances in Product Family and Product Platform Design : Methods & Applications, Timothy W. Simpson, Jianxin (Roger) Jiao, Zahed Siddique, Katja Hölttä-Otto Ed., : Springer-Verlag New York, 2014, pp. 91-118.
[5]
M. Lange, Design Semiosis : Synthesis of Products in the Design Activity. 1st ed. VDM Verlag Dr. Müller Aktiengesellschaft & Co. KG, 2009.
[6]
M. Lange and J. Åslund, "Capturing Quality Perceptions in the Design Rational of a Modular Product Concept," in Design for Configuration: A Debate Based on the 5th Wdk Workshop on Product Structuring, Asko Riitahuhta, Antti Pulkkinen Ed., : Springer Berlin/Heidelberg, 2001, pp. 101-116.

Conference papers

[1]
S. Liu et al., "A Framework of Data-Driven Dynamic Optimisation for Smart Production Logistics," in IFIP International Conference on Advances in Production Management Systems, 2020, pp. 213-221.
[2]
J. Wessel Strandhagen et al., "Factors Affecting Shipyard Operations and Logistics: A Framework and Comparison of Shipbuilding Approaches," in Advances in Production Management Systems, 2020.
[3]
J. Baalsrud Hauge et al., "Employing digital twins within production logistics," in 2020 IEEE ICE/ITMC, 2020.
[4]
J. Baalsrud Hauge et al., "Digital and Physical Testbed for Production Logistics Operations," in Advances in Production Management Systems, 2020.
[5]
T. K. Agrawal, R. Kalaiarasan and M. Wiktorsson, "Blockchain-Based Secured Collaborative Model for Supply Chain Resource Sharing and Visibility," in IFIP Advances in Information and Communication Technology : The Path to Digital Transformation and Innovation of Production Management Systems, 2020, pp. 259-266.
[7]
M. Kurdve and M. Bellgran, "Operationalisation of the circular economy concept at the factory shop floor," in Proceedings of the 6th EurOMA Sustainable Operations and Supply Chains Forum, 2019.
[8]
M. Zafarzadeh, J. Baalsrud Hauge and M. Wiktorsson, "Real-time data gathering in production logistics : A research review on applications and technologies affecting environmental and social sustainability," in 6th International EurOMA Sustainable Operations and Supply Chains Forum, 18-19 March 2019, in Gothenburg., 2019.
[9]
M. Oliveri et al., "Designing an IoT-focused, Multiplayer Serious Game for Industry 4.0 Innovation," in 2019 IEEE INTERNATIONAL CONFERENCE ON ENGINEERING, TECHNOLOGY AND INNOVATION (ICE/ITMC), 2019.
[10]
S. E. Birkie, M. Bellgran and A. Feldmann, "Managing manufacturing footprint decisions for better sustainability," in 6th EurOMA Sustainable Operations and Supply chains Forum, 2019.
[11]
S. Linderson, S. E. Birkie and M. Bellgran, "Success factors for rapid roll-out of a lean method change: a pharmaceutical manufacturing case study," in 26th EurOMA conference, 2019.
[12]
M. Zafarzadeh et al., "Real-Time Data Sharing in Production Logistics : Exploring Use Cases by an Industrial Study," in Advances in Production Management Systems. Towards Smart Production Management Systems : IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1–5, 2019, Proceedings, Part II, 2019, pp. 285-293.
[13]
J. G. Shin et al., "Smart shipyard platform with computational shipyard dynamics and its application to a forming Shop," in SNAME Maritime Convention 2019, SMC 2019, 2019.
[14]
F. Yacob and D. Semere, "Variation Propagation in Multistage Machining Processes Using Dual Quaternions," in 6th International Conference on Mechanical, Materials and Manufacturing, 2019.
[16]
Y.-K. Jeong et al., "Discrete Event Simulation for Strategic Shipyard Planning," in COMPIT 2019, 2019.
[17]
E. Boyle et al., "Linking learning outcomes and game mechanics in the early stages of the RU EU? project," in 7th International Conference on Games and Learning Alliance, GALA 2018, 2019, pp. 191-200.
[18]
P. Trucco, A. Negri and S. E. Birkie, "The influence of structural and dynamic complexity factors on supply chain resilience: a qualitative study," in Proceedings of 25th EurOMA Conference, 2018.
[19]
M. Wiktorsson, C. Andersson and V. Turunen, "Leading towards high-performance manufacturing – Enabling indicators in early R&D phases ensuring future KPI outcome," in Proceedings of the 8th Swedish Production Symposium (SPS 2018), 2018, pp. 223-230.
[20]
M. Wiktorsson et al., "Smart Factories : South Korean and Swedish examples on manufacturing settings," in Procedia Manufacturing, 2018, pp. 471-478.
[21]
H. Liu et al., "Deep Learning-based Multimodal Control Interface for Human-Robot Collaboration," in 51st CIRP Conference on Manufacturing Systems, 2018, pp. 3-8.
[22]
E. Flores-Garcia et al., "Revisiting challenges in using Discrete Event Simulation in early stages of Production System Design," in Advances in Production Management Systems : Production Management for Data-Driven, Intelligent, Collaborative, and Sustainable Manufacturing, 2018, pp. 534-540.
[23]
E. R. Kutelia et al., "The tribological efficiency and the mechanism of action of nano-porous composition base brake lining materials," in International Congress on Advances in Applied Physics and Materials Science, 2011, pp. 546-554.
[24]
K. Palm et al., "Emerging clean-tech firms: What is the right mix of support activities?," in The 21st NFF Conference (Nordic Academy of Management), Stockholm, Sweden, 20-24 August, 2011, 2011.
[25]
S. Anop and S. Aldaghi, "MANAGEMENT OF COMMUNICATION RISKS : EVIDENCEFROM INTERNATIONAL PROJECTS CASE STUDY," in International conference proceedings PM-05 -  Advancing project management for the 21st century “Concepts, tools & techniques for managing successful projects”,  Heraklion, Crete, Greece., 2010.
[26]
M. Lange, "Construction of a Design for Brand Perspective," in 1st Nordic Conference on Product Lifecycle Management, NordPLM'06, Gothenburg, Sweden, January 25-26 2006, 2006.

Student thesis (50 latest MSc and BSc)

[11]
[14]
[16]
D. Lindkvist and S.-L. Law, "Standardisering av hjälpmedel för sjuksköterskor," , 2020.
[19]
D. Bertilsson and S. Yousef, "En undersökning av Epirocs Scope 3-utsläpp," , 2020.
[20]
H. Ali and J. J. Sivarajah, "Gyrolösning för samtliga maskiner," , 2020.
[23]
N. Rahim and N. Al-badri, "Utveckling av slanganslutning," , 2020.
[26]
[27]
K. Larsson Sparr and M. Muhonen, "Design- och simuleringsstudie av flödeshus och sensorkropp," , 2020.
[28]
A. Mulolli and M. Logge, "Automatiserad kalibrering av mjölkmätare," , 2020.
[34]
F. Türk and R. Zandi, "Circular Economy : Reuse of packaging," , 2019.
[40]
A. Karlsson and A. Oldestam, "Beräkning för kapacitet i vattenhanteringsrör," , 2019.
[41]
S. Alemseged and N. Saleem, "BTPX 305 separator," , 2019.
[46]
G. Ané and M. Karlsson, "Dimensionering av färdigvarulager," , 2019.
[47]
D. Ghazarian and S. Sjöberg, "Digitalization of the environmental matrix," , 2019.
Full list in the KTH publications portal
Page responsible:Amita Singh
Belongs to: Sustainable Production Development
Last changed: Sep 17, 2020