Mihai Nicolescu

Professor Emeritus

Kontakt

Telefon: 08-790 8905

Fax: 08-21 08 51

E-mail: gmni@kth.se

Utbildning

1998

Docent

Kungliga Tekniska Högskolan

Stockholm, Sverige

1991

Doktorand

Kungliga Tekniska Högskolan

Stockholm, Sverige

1971

Civilingejörsexamen

University of Timisoara

Timisoara, Rumänien 

Publikationer

  1. Amir Rashid, Cornel Mihai Nicolescu: "Pallet System for Flexible manufacturing", 2006, XI Congress of Vibration, St. Petersburg.

  2. Cornel Mihai Nicolescu, Venturia Chiroiu: "On the modeling the damping across the length scale", Proceedings of the Annual Symposium of the ISM, May 15/16 2006

  3. C.M. Nicolescu, Ligia Munteanu: "On a finger model actuated with shape memory alloy artificial muscles", Advanced in Robot Dynamics and Control, 2006
  4. Ptere Stiuca, C.M. Nicolescu: "On the mechanical behaviour of Nanostructered Materials", Chapter 12, Topics in Solid Mechanics, EAR, 2006
  5. C.M. Nicolescu, Traian Badea: “On the modeling the camping across the length scales”, Proceedings of the Annual Symposium of the ISM”, 2006
  6. Amir Rashid, CM Nicolescu: "Active control of palette systems", 2005 Journal of Material Processing)
  7. Zhang Qingying1, Yue Weihong1, Cornel-Mihai Nicolescu: "RESEARCH ON MACHINE VISION ON-LINE MEASUREMENT SYSTEM BASED ON MULTI-SENSOR FUSION TECHNOLOGY", THE EIGHTH WORLD CONFERENCE ON INTEGRATED DESIGN PROCESS TECHNOLOGY, 2006, Bejing, China.
  8. Veturia Chiroiu, C.M. Nicolescu: "A shape description model by using sensor data from touch", Fourth Symposium on Multibody Dynamics and vibration of the 19Biennial Conference on mechanical Vibration and Noise, September 2-6, 2006, Chicago, Il. USA.
  9. Amir Rashid, Cornel Mihai Nicolescu: "Active vibration control in palletized workholding system for milling", International Journal of Machine Tools and Manufacture, January, 2006.
  10. Daghini, L., Nicolescu, C.M.: “Design of Compact Vibration Damping Turret with Hydrostatic Clamping System for Hard to Machine Materials”, peer-reviewed conference contribution to the Swedish Production Symposium 2008, Stockholm, Sweden, 2008, TRITA-IIP-08- 15
  11. Daghini, L.: “Theoretical and Experimental Study of Tooling Systems – Passive Control of Machining Vibration”, Licentiate Thesis in Production Engineering at the Royal Institute of Technology, KTH Production Engineering, Stockholm, Sweden TRITA-IIP-08-04, ISSN 1650-1888
  12. Daghini, L., Nicolescu, C.M.: “Characteristics and Stability Analysis of Tooling Systems with Enhanced Damping”, peer-reviewed conference contribution to the Process Machine Interaction, Hannover, Germany, 2008, TRITA-IIP-08-10
  13. Gerth, J., Werner, M., Larsson, M., Nicolescu, M.: “Reproducing wear mechanisms in gear hobbing – evaluation of a single insert milling test”, Wear, 2008, ISSN 0043-1648
  14. Archenti, A., Nicolescu, C.M.: “Evaluation of machining system dynamic stiffness”, peer-reviewed conference contribution to the Swedish Production Symposium, Gothenburg, Sweden, 2007, TRITA-IIP-07-05
  15. Archenti, A., Nicolescu, C.M.: “Evaluation of machining system dynamic stiffness”, peer-reviewed conference contribution to the Swedish Production Symposium, Gothenburg, Sweden, 2007, TRITA-IIP-07-04
  16. Archenti, A: “Tester av maskinbearbetningssytem – Statiska och dynamiska analyser” Master of Science Thesis at the Royal Institute of Technology, KTH Production Engineering, Stockholm, Sweden, 2007, 2007:277
  17. Berglund, A., Nicolescu, C.M.: “Investigation of the Effect of Microstructures on CGI Machining”, peer-reviewed conference contribution to the Swedish Production Symposium, Gothenburg, Sweden, 2007, TRITA-IIP-07-06
  18. Daghini, L., Nicolescu, C.M.: “Influence of inserts coating and substrate on TOOLOX 44 machining”, peer-reviewed conference contribution to the Swedish Production Symposium 2007, Gothenburg, Sweden, 2007, TRITA-IIP-07-07
  19. Werner, M.; “Analysis of cutting mechanisms in machining of gears”, peer-reviewed conference contribution to the Swedish Production Symposium 2007, Gothenburg; Sweden, 2007
  20. Werner, M., Micolescu, M.: “Gear production industry relevant research issues”, Internal report, 2007
  21. Berglund, A: “Skärande bearbetning av kompaktgrafitjärn” Master of Science Thesis at the Royal Institute of Technology, KTH Production Engineering, Stockholm, Sweden, 2005, 2005:213
  22. Daghini, L.: “Konstruktion av vibrationsdämpande avstickningsverktygshållare” Master of Science Thesis at the Royal Institute of Technology, KTH Production Engineering, Stockholm, Sweden, 2005, 2005:212
  23. Varun Navayar, Cornel Mihai Nicolescu: "Analys of Dynamic behavior of Boring Tool Holders", Journal of Materials processing, 2007
  24. Archenti A, Nicolescu, C.M.: "Evaluation of Machining System Dynamic Stiffness", SPP Conference, Göteborg, 2007
  25. Amir Rashid, Cornel Mihai Nicolescu: "Design and implementation of tuned viscoelastic dampers for vibration control in milling", International Journal of Machine Tools and Manufacture, January, 2008
  26. Werner, M.: “Relationships between properties of materials and segmentation of chips during turning”, Master of Science Thesis at the Royal Institute of Technology, KTH Production Engineering, Stockholm, Sweden, 2005, SRN KTH/MSE 05/83 SE NEK/EX
  27. Daghini, L., Archenti, A., Nicolescu, C.M.: “Design, implementation and analysis of composite material dampers for turning operations”, the peer-reviewed conference ICME 2009: International Conference on Mechanical Engineering”, Tokyo, Japan, 2009
  28. Archenti, A., Nicolescu M.: “Loaded Double Ball Bar for capability testing of NC machine tools”, Submitted to journal: Mechanical system and signal processing, 2009
  29. Nicolescu, C. M., Archenti, A., Lundholm, T.: “Model-based identification of process-machine interaction dynamics in face milling of prehardened steel”, Submitted to Materials processing, 2009
  30. Berglund, A, Nicolescu, C.M., Svensson, H.: “The effect of interlamellar distance in pearlite on CGI machining”, Conference ICME 2009: International Conference on Mechanical Engineering”, Tokyo, Japan, 2009
  31. Daghini, L., Archenti, A., Nicolescu, C. M.: “Design, implementation and Analysis of composite material dampers for turning operations”, submitted to the peer-reviewed conference ICME 2009: International Conference on Mechanical Engineering”, Tokyo, Japan, 2009
  32. Werner, M., Nicolescu, C. M., Lindberg, B.: “A comparative study of cutting mechanisms in hobbing and single tooth milling”, 2009
  33. Werner, M., Nicolescu, C. M., Lindberg, B.: “Influence of polished tool surfaces on single tooth milling test”, 2009
  34. Werner, M., Nicolescu, C. M.: “Design and development of a dynamometer for cutting force measurement in hobbing”, 2009
  35. Grenmyr, G., Berglund, T., Nicolescu, M.: "Investigation of Tool Wear Mechanisms in CGI Machining", IJMF-MM16-08, 2009

Böcker:

  • A. Jarfors, M. Nicolescu: “Manufacturing technology",1999, Studentlitteratur, Lund
  • Cornel Mihai Nicolescu, Daniel Tesfamariam: "Production management", 2004, KTH
  • Topics in Applied Mechanics, Chapter 1, "A preisach model of hysteretic behaviour of nonlinear mesocopic elastic material", 2003
  • "Capability Analysis, Static and Dynamic behaviour of Machining System" - E-learning 2008