Study year 3

Degree Programme in Design and Product Realisation (CDEPR), Programme syllabus for studies starting in autumn 2018

The following courses are part of study year three.

The course application codes and study periods are valid for the academic year 2020/2021. For other academic years, different application codes and study periods may apply.

General

Degree project, bachelor level, 15 credits, is a compulsory course during the spring term. A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

During the third year 3 conditionally elective courses should be chosen.

Studies on advanced level, year 4 and 5, within the MSc in Engineering programme Design and Product Realization takes place within framework of a Master program.

Available Master programs for Design and Product Realization:

  • Integrated Product Design
  • Industrial Production
  • Industrial Product Development
  • Aerospace
  • Industrial Management (Technical Profile: Engineering Design, Energy, Production or Solid Mechanics)
  • Naval Architecture
  • Sustainable Energy Engineering
  • Technical Mechanics
  • Vehicle Engineering 
Mandatory Appl.code Scope Study period
 1   2   3   4 
MF1016 Basic Electrical Engineering 52000 9.0 hp 4.5 4.5
MF1040 Design and Product Realization Methodology 51999 9.0 hp 4.5 4.5
ME1003 Industrial Management, Basic Course 6.0 hp

A degree project for Degree of Bachelor must be read during study year 3, independently of chosen masters programme.

Conditionally elective Appl.code Scope Study period
 1   2   3   4 
MG110X Degree Project in Production Engineering, First Cycle 60077 15.0 hp 7.5 7.5
MJ146X Degree Project in Sustainable Energy Engineering, First Cycle 60018 15.0 hp 7.5 7.5
SA118X Degree Project in Mechanical Engineering, First Level 61368 15.0 hp 7.5 7.5
MF130X Degree Project in Machine Design, First Cycle 15.0 hp
MF131X Degree Project in Integrated Product Development, First Cycle 15.0 hp
MF132X Degree Project in Industrial Design Engineering, First Cycle 15.0 hp
MF133X Degree Project in Mechatronics, First Cycle 15.0 hp

Specialisations

Mandatory Appl.code Scope Study period
 1   2   3   4 
SF1916 Probability Theory and Statistics 51322 6.0 hp 6.0
MF1016 Basic Electrical Engineering 52000 9.0 hp 4.5 4.5
MF1040 Design and Product Realization Methodology 51999 9.0 hp 4.5 4.5
EL1010 Automatic Control, General Course 6.0 hp
ME1003 Industrial Management, Basic Course 6.0 hp
SG1217 Fluid Mechanics, Basic Course
Can be replaced by SG1220
6.0 hp
Recommended Appl.code Scope Study period
 1   2   3   4 
SE1025 FEM for Engineering Applications 51034 6.0 hp 6.0

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

Mandatory Appl.code Scope Study period
 1   2   3   4 
MF1016 Basic Electrical Engineering 52000 9.0 hp 4.5 4.5
MF1040 Design and Product Realization Methodology 51999 9.0 hp 4.5 4.5
EL1010 Automatic Control, General Course 6.0 hp
ME1003 Industrial Management, Basic Course 6.0 hp

At least one of the conditionally elective courses from the list below must be chosen during study year 3.

Conditionally elective Appl.code Scope Study period
 1   2   3   4 
SF1916 Probability Theory and Statistics 51322 6.0 hp 6.0
SG1220 Fluid Mechanics for Engineers
SG1217 can be chosen instead of SG1220.
50172 6.0 hp 6.0
HM1025 Ergonomics in Product Development 52025 6.0 hp 6.0
MG1024 Production 50174 6.0 hp 6.0
MG1002 Automation Technology 60067 6.0 hp 6.0
SE1025 FEM for Engineering Applications 60023 6.0 hp 6.0
SK2371 Physics of Visual Impressions, Larger Course 60902 9.0 hp 9.0
DD1321 Applied Programming and Computer Science 9.0 hp
MF1025 Model Based Product Development II 6.0 hp
MJ1401 Heat Transfer 6.0 hp
Recommended Appl.code Scope Study period
 1   2   3   4 
SG1217 Fluid Mechanics, Basic Course
SG1220 can be chosen instead of SG1217
6.0 hp

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

CDEPR-students at Masters programme, Industrial Management (TINEM)
A technical profile specified within the study year plan for Degree Programme in Mechanical Engineering must be chosen

One of the following profiles can be chosen during study year 4-5:

  • Technical profile Construction
    Courses corresponding to at least 18 credits, listed below, shall be taken during study year 4-5:
    MF2101 Machine Design 6 credits
    MF2102 Machine Design Project 6 credits
    MF2010 Component Design 6 credits
    MF2011 Systems Engineering 9 credits
    MF2019 CAD 3D-modelling and Visualization 6 credits *
    MF2024 Robust and Probabilistic Design 6 credits
    * will be able to study in period 2 and 4
  • Technical profile Energy
    MJ2413 Energy and Environment 6 credits
    MJ2411 Renewable Energy Technology 6 credits *
    MJ2380 Introduction to Energy Systems Analysis and Applications 9 credits
    *can also be chosen study year 5
  • Technical profile Production
    MG2029  Production Engineering - Planning and Control 6 credits
    (MG1024 Production in study year 3, is the eligibility course for MG2029)

    One of the following two courses must be chosen:

    MG2028 CAD and Other IT Tools in Industrial Processes 6 credits
    MG2130  Modelling and Simulation of Industrial Processes 9 credits
    As well as one of the following courses must be chosen, either study year 4 or 5:
    MG2009 Advanced Manufacturing Technology 6 credits
    MG2109 Advanced Manufacturing Technology, Extended Course 9 credits
    MG2110 Advanced Metrology 9 credits
    MG2022 Advanced CAD Modelling and Rapid Prototyping 6 credits *
    MG2135 PLM - Product Lifecycle Management 9 credits
    MG2036 Computer Aided Manufacturing - CAM 6 credits
    MG2038 Digital Factories 6 credits **
    MG2010 Modern Industrial Metrology 6 credits *
    * MG2028 prerequisites
    ** MG2130 prerequisites
  • Technical profile Solid Mechanics 
    SE1025 FEM for Engineering Applications 6 credits 

    One of the following two courses must be chosen:

    SE2126 Material Mechanics 9 credits
    SE2132 Applied Elasticity with FEM 9 credits

    As well as one of the following courses must be chosen:

    SE2860 FEM Modelling 8 credits
    SE2137 Fatigue 6 credits
    SE2139 Fracture Mechanics 6 credits 
    SE2134 Dynamic Problems in Solid Mechanics  7,5 credits
    SE2121 Introduction to Biomechanics 9 credits
Mandatory Appl.code Scope Study period
 1   2   3   4 
MF1016 Basic Electrical Engineering 52000 9.0 hp 4.5 4.5
MF1040 Design and Product Realization Methodology 51999 9.0 hp 4.5 4.5
ME1003 Industrial Management, Basic Course 6.0 hp
ME2015 Project Management: Leadership and Control 6.0 hp
ME2063 Team Leadership and Human Resource Management 6.0 hp

At least 9 credits (hp) of the conditionally elective courses in the list below must be chosen during study year 3.

Notice: You need MG1024 Production for eligibility to the course MG2029 Production Engineering - Planning and Control, which is a mandatory course for students attending the Master's Programme Industrial Management (TINEM), Technical profile: Production

Conditionally elective Appl.code Scope Study period
 1   2   3   4 
SF1916 Probability Theory and Statistics 51322 6.0 hp 6.0
SG1220 Fluid Mechanics for Engineers
SG1217 can be chosen instead of SG1220.
50172 6.0 hp 6.0
HM1025 Ergonomics in Product Development 52025 6.0 hp 6.0
MG1024 Production 50174 6.0 hp 6.0
SE1025 FEM for Engineering Applications 60023 6.0 hp 6.0
DD1321 Applied Programming and Computer Science 9.0 hp
EL1010 Automatic Control, General Course 6.0 hp
MF1025 Model Based Product Development II 6.0 hp
MJ1401 Heat Transfer 6.0 hp
SG1217 Fluid Mechanics, Basic Course
SG1220 can be chosen instead of SG1217.
6.0 hp

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme

Mandatory Appl.code Scope Study period
 1   2   3   4 
MF1016 Basic Electrical Engineering 52000 9.0 hp 4.5 4.5
MF1040 Design and Product Realization Methodology 51999 9.0 hp 4.5 4.5
HM1025 Ergonomics in Product Development 52025 6.0 hp 6.0
ME1003 Industrial Management, Basic Course 6.0 hp
MF1025 Model Based Product Development II
Only one of MF1025 and MF130X can be chosen
6.0 hp

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme (see list of conditional elective courses presented under the heading "General courses").

Mandatory Appl.code Scope Study period
 1   2   3   4 
ME1003 Industrial Management, Basic Course 6.0 hp
MF1016 Basic Electrical Engineering 9.0 hp
MF1040 Design and Product Realization Methodology 9.0 hp

At least 12 hp of the conditionally elective courses must be chosen.

Conditionally elective Appl.code Scope Study period
 1   2   3   4 
DD1321 Applied Programming and Computer Science 9.0 hp
EL1010 Automatic Control, General Course 6.0 hp
HM1025 Ergonomics in Product Development 6.0 hp
MF1025 Model Based Product Development II
Only one of MF1025 and MF130X can be chosen
6.0 hp
MG1002 Automation Technology 6.0 hp
MG1024 Production 6.0 hp
MJ1401 Heat Transfer 6.0 hp
SE1025 FEM for Engineering Applications 6.0 hp
SF1916 Probability Theory and Statistics 6.0 hp
SG1217 Fluid Mechanics, Basic Course
SG1217 can be chosen instead of SG1220.
6.0 hp
SG1220 Fluid Mechanics for Engineers
SG1217 can be chosen instead of SG1220.
6.0 hp
SK2371 Physics of Visual Impressions, Larger Course 9.0 hp

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme (see list of conditional elective courses presented under the heading "General courses").

Mandatory Appl.code Scope Study period
 1   2   3   4 
MF1016 Basic Electrical Engineering 52000 9.0 hp 4.5 4.5
MF1040 Design and Product Realization Methodology 51999 9.0 hp 4.5 4.5
EL1010 Automatic Control, General Course 6.0 hp
ME1003 Industrial Management, Basic Course 6.0 hp

At least 6 hp (credits) of the conditionally elective courses must be chosen.

Conditionally elective Appl.code Scope Study period
 1   2   3   4 
SF1916 Probability Theory and Statistics 51322 6.0 hp 6.0
SG1220 Fluid Mechanics for Engineers
SG1217 can be chosen instead of SG1220.
50172 6.0 hp 6.0
HM1025 Ergonomics in Product Development 52025 6.0 hp 6.0
MG1024 Production 50174 6.0 hp 6.0
MG1002 Automation Technology 60067 6.0 hp 6.0
SE1025 FEM for Engineering Applications 60023 6.0 hp 6.0
SK2371 Physics of Visual Impressions, Larger Course 60902 9.0 hp 9.0
DD1321 Applied Programming and Computer Science 9.0 hp
MF1025 Model Based Product Development II
Only one of MF1025 or MF130X can be chosen
6.0 hp
MJ1401 Heat Transfer 6.0 hp
SG1217 Fluid Mechanics, Basic Course
SG1220 can be chosen instead of SG1217
6.0 hp

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

Mandatory Appl.code Scope Study period
 1   2   3   4 
MF1016 Basic Electrical Engineering 52000 9.0 hp 4.5 4.5
MF1040 Design and Product Realization Methodology 51999 9.0 hp 4.5 4.5
ME1003 Industrial Management, Basic Course 6.0 hp

At least 12 credits (hp) of the conditionally elective courses from the list below must be chosen during study year 3.

Conditionally elective Appl.code Scope Study period
 1   2   3   4 
SF1916 Probability Theory and Statistics 51322 6.0 hp 6.0
SG1220 Fluid Mechanics for Engineers
SG1217 can be chosen instead of SG1220.
50172 6.0 hp 6.0
HM1025 Ergonomics in Product Development 52025 6.0 hp 6.0
MG1024 Production 50174 6.0 hp 6.0
MG1002 Automation Technology 60067 6.0 hp 6.0
SE1025 FEM for Engineering Applications 60023 6.0 hp 6.0
SK2371 Physics of Visual Impressions, Larger Course 60902 9.0 hp 9.0
DD1321 Applied Programming and Computer Science 9.0 hp
EL1010 Automatic Control, General Course 6.0 hp
MF1025 Model Based Product Development II
Only one of MF1025 or MF130X can be chosen
6.0 hp
MJ1401 Heat Transfer 6.0 hp
SG1217 Fluid Mechanics, Basic Course
SG1220 can be chosen instead of SG1217
6.0 hp

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme (see list of conditional elective courses presented under the heading "General courses").

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme (see list of conditional elective courses presented under the heading "General courses").

Mandatory Appl.code Scope Study period
 1   2   3   4 
SG1220 Fluid Mechanics for Engineers
SG1217 can be chosen instead of SG1220.
50172 6.0 hp 6.0
MF1016 Basic Electrical Engineering 52000 9.0 hp 4.5 4.5
MF1040 Design and Product Realization Methodology 51999 9.0 hp 4.5 4.5
ME1003 Industrial Management, Basic Course 6.0 hp

At least 6 hp (credits) of the conditionally elective courses must be chosen.

Conditionally elective Appl.code Scope Study period
 1   2   3   4 
SF1916 Probability Theory and Statistics 51322 6.0 hp 6.0
HM1025 Ergonomics in Product Development 52025 6.0 hp 6.0
MG1024 Production 50174 6.0 hp 6.0
MG1002 Automation Technology 60067 6.0 hp 6.0
SE1025 FEM for Engineering Applications 60023 6.0 hp 6.0
SK2371 Physics of Visual Impressions, Larger Course 60902 9.0 hp 9.0
DD1321 Applied Programming and Computer Science 9.0 hp
EL1010 Automatic Control, General Course 6.0 hp
MF1025 Model Based Product Development II
Only one of MF1025 or MF130X can be chosen
6.0 hp
MJ1401 Heat Transfer 6.0 hp

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme (see list of conditional elective courses presented under the heading "General courses").

Mandatory Appl.code Scope Study period
 1   2   3   4 
MF1016 Basic Electrical Engineering 52000 9.0 hp 4.5 4.5
MF1040 Design and Product Realization Methodology 51999 9.0 hp 4.5 4.5
MG1024 Production 50174 6.0 hp 6.0
MG1002 Automation Technology 60067 6.0 hp 6.0
ME1003 Industrial Management, Basic Course 6.0 hp

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme (see list of conditional elective courses presented under the heading "General courses").

Mandatory Appl.code Scope Study period
 1   2   3   4 
SG1220 Fluid Mechanics for Engineers
SG1217 can be chosen instead of SG1220.
50172 6.0 hp 6.0
MF1016 Basic Electrical Engineering 52000 9.0 hp 4.5 4.5
MF1040 Design and Product Realization Methodology 51999 9.0 hp 4.5 4.5
ME1003 Industrial Management, Basic Course 6.0 hp
MJ1401 Heat Transfer 6.0 hp

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme (see list of conditional elective courses presented under the heading "General courses").

Mandatory Appl.code Scope Study period
 1   2   3   4 
SG1220 Fluid Mechanics for Engineers
SG1217 can be chosen instead of SG1220.
50172 6.0 hp 6.0
MF1016 Basic Electrical Engineering 52000 9.0 hp 4.5 4.5
MF1040 Design and Product Realization Methodology 51999 9.0 hp 4.5 4.5
ME1003 Industrial Management, Basic Course 6.0 hp

At least 6 hp (credits) of the conditionally elective courses must be chosen.

Conditionally elective Appl.code Scope Study period
 1   2   3   4 
SF1916 Probability Theory and Statistics 51322 6.0 hp 6.0
HM1025 Ergonomics in Product Development 52025 6.0 hp 6.0
MG1024 Production 50174 6.0 hp 6.0
MG1002 Automation Technology 60067 6.0 hp 6.0
SE1025 FEM for Engineering Applications 60023 6.0 hp 6.0
SK2371 Physics of Visual Impressions, Larger Course 60902 9.0 hp 9.0
DD1321 Applied Programming and Computer Science 9.0 hp
EL1010 Automatic Control, General Course 6.0 hp
MF1025 Model Based Product Development II 6.0 hp
MJ1401 Heat Transfer 6.0 hp

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme (see list of conditional elective courses presented under the heading "General courses").

Mandatory Appl.code Scope Study period
 1   2   3   4 
MF1016 Basic Electrical Engineering 52000 9.0 hp 4.5 4.5
MF1040 Design and Product Realization Methodology 51999 9.0 hp 4.5 4.5
SE1025 FEM for Engineering Applications 60023 6.0 hp 6.0
ME1003 Industrial Management, Basic Course 6.0 hp

At least 6 hp (credits) of the conditionally elective courses must be chosen.

Conditionally elective Appl.code Scope Study period
 1   2   3   4 
SF1916 Probability Theory and Statistics 51322 6.0 hp 6.0
SG1220 Fluid Mechanics for Engineers
SG1217 can be chosen instead of SG1220.
50172 6.0 hp 6.0
HM1025 Ergonomics in Product Development 52025 6.0 hp 6.0
MG1024 Production 50174 6.0 hp 6.0
MG1002 Automation Technology 60067 6.0 hp 6.0
SK2371 Physics of Visual Impressions, Larger Course 60902 9.0 hp 9.0
DD1321 Applied Programming and Computer Science 9.0 hp
EL1010 Automatic Control, General Course 6.0 hp
MF1025 Model Based Product Development II 6.0 hp
MJ1401 Heat Transfer 6.0 hp
SG1217 Fluid Mechanics, Basic Course
SG1220 can be chosen instead of SG1217
6.0 hp

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme (see list of conditional elective courses presented under the heading "General courses").

Mandatory Appl.code Scope Study period
 1   2   3   4 
MF1016 Basic Electrical Engineering 52000 9.0 hp 4.5 4.5
MF1040 Design and Product Realization Methodology 51999 9.0 hp 4.5 4.5
ME1003 Industrial Management, Basic Course 6.0 hp

At least 12 hp (credits) of the conditionally elective courses must be chosen.

Conditionally elective Appl.code Scope Study period
 1   2   3   4 
SF1916 Probability Theory and Statistics 51322 6.0 hp 6.0
SG1220 Fluid Mechanics for Engineers
SG1217 can be chosen instead of SG1220.
50172 6.0 hp 6.0
HM1025 Ergonomics in Product Development 52025 6.0 hp 6.0
MG1024 Production 50174 6.0 hp 6.0
MG1002 Automation Technology 60067 6.0 hp 6.0
SE1025 FEM for Engineering Applications 60023 6.0 hp 6.0
SK2371 Physics of Visual Impressions, Larger Course 60902 9.0 hp 9.0
DD1321 Applied Programming and Computer Science 9.0 hp
EL1010 Automatic Control, General Course 6.0 hp
MF1025 Model Based Product Development II 6.0 hp
MJ1401 Heat Transfer 6.0 hp
SG1217 Fluid Mechanics, Basic Course
SG1220 can be chosen instead of SG1217
6.0 hp