Study year 4

Degree Programme in Mechanical Engineering (CMAST), Programme syllabus for studies starting in autumn 2017

The following courses are part of study year four.

The course application codes and study periods are valid for the academic year 2020/2021. For other academic years, different application codes and study periods may apply.

General

Information is based upon the curriculum for academic year 2018/2019. Changes may occur.

Master's programmes leading to Master of Science in Engineering degree:

  • Aerospace Engineering
  • Vehicle Engineering
  • Sustainable Energy Engineering
  • Industrial Management (Technical Profile: Engineering Design, Energy, Production or Solid Mechanics)
  • Integrated Product Design
    Track, Innovation Management and Product Development
  • Production Engineering Management
  • Engineering Design
    Track, Combustion Engineering
    Track, Machine Design
    Track, Mechatronics
  • Nuclear Energy Engineering
  • Applied and Computational Mathematics (Technical Profile: Production and Energy or Solid Mechanics)
  • Naval Architecture
  • Sustainable Technology (Technical Profile: Engineering Design, Energy, Production or Solid Mechanics)
  • Engineering Mechanics
    Track, Fluid Mechanics
    Track, Solid Mechanics
    Track, Sound and Vibrations

Some Masterprograms require specific courses during year 3.

Specialisations

CMAST-students at Masters programme, Industrial Management (TINEM)
A technical profile specified within the study year plan for Degree Programme in Mechanical Engineering must be chosen

One of the following profiles can be chosen during study year 4-5:

  • Technical profile Construction
    Courses corresponding to at least 18 credits, listed below, shall be taken during study year 4-5:
    MF2101 Machine Design 6 credits
    MF2102 Machine Design Project Course 6 credits
    MF2010 Component Design 6 credits
    MF2011 Systems Engineering 9 credits
    MF2019 CAD 3D-modelling and Visualization 6 credits *
    MF2024 Robust and Probabilistic Design 6 credits
    * will be able to study in period 2 and 4
  • Technical profile Energy
    MJ2413 Energy and Environment 6 credits
    MJ2411 Renewable Energy Technology 6 credits *
    MJ2380 Introduction to Energy Systems Analysis and Applications 9 credits
    *can also be chosen study year 5
  • Technical profile Production
    MG2029  Production Engineering - Planning and Control 6 credits
    (MG1024 Production in study year 3, is the eligibility course for MG2029)

    One of the following two courses must be chosen:

    MG2028 CAD and Other IT Tools in Industrial Processes 6 credits
    MG2130  Modelling and Simulation of Industrial Processes 9 credits
    As well as one of the following courses must be chosen, either study year 4 or 5:
    MG2009 Advanced Manufacturing Technology 6 credits
    MG2109 Advanced Manufacturing Technology, Extended Course 9 credits
    MG2110 Advanced Metrology 9 credits
    MG2022 Advanced CAD Modelling and Rapid Prototyping 6 credits *
    MG2135 PLM - Product Lifecycle Management 9 credits
    MG2036 Computer Aided Manufacturing - CAM 6 credits
    MG2038 Digital Factories 6 credits **
    MG2010 Modern Industrial Metrology 6 credits *
    * MG2028 prerequisites
    ** MG2130 prerequisites
  • Technical profile Solid Mechanics 
    SE1025 FEM for Engineering Applications 6 credits 

    One of the following two courses must be chosen:

    SE2126 Material Mechanics 9 credits
    SE2132 Applied Elasticity with FEM 9 credits

    As well as one of the following courses must be chosen:

    SE2860 FEM Modelling 8 credits
    SE2137 Fatigue 6 credits
    SE2139 Fracture Mechanics 6 credits 
    SE2134 Dynamic Problems in Solid Mechanics  7,5 credits
    SE2121 Introduction to Biomechanics 9 credits

Technical profile Construction
Courses corresponding to at least 18 credits, listed below, within the profile, shall be taken during study year 4-5.

Technical profile Energy
Courses listed below, within the profile, shall be taken during study year 4-5.

Technical profile Production
Within the profile, the course MG2029 should be read, as well as one of the courses MG2028 or MG2130.
In addition to these courses, one of the other conditionally optional courses within the profile, should be read in year 4-5.

Technical profile Solid Mechanics
Within the profile, the course SE1025 should be read, as well as one of the courses SE2126 or SE2132.
In addition to these courses, one of the other conditionally optional courses within the profile, should be read in year 4-5.

 

 

Conditionally elective Appl.code Scope Study period
 1   2   3   4 
MF2101 Machine Design
Technical profile - Construction
50404 6.0 hp 6.0
MG2029 Production Engineering - Planning and Control
Technical profile - Production
51439 6.0 hp 6.0
MG2038 Digital Factories
Technical profile - Production
50768 6.0 hp 6.0
SE2137 Fatigue
Technical profile - Solid Mechanics
51035 6.0 hp 6.0
MG2009 Advanced Manufacturing Technology
Technical profile - Production
50029 6.0 hp 4.5 1.5
MG2028 CAD and Other IT Tools in Industrial Processes
Technical profile - Production
51444 6.0 hp 1.5 4.5
MG2109 Advanced Manufacturing Technology, Extended Course
Technical profile - Production
50772 9.0 hp 4.5 4.5
MG2110 Advanced Metrology
Technical profile - Production
50774 9.0 hp 4.5 4.5
MJ2411 Renewable Energy Technology
Technical profile - Energy
50550 6.0 hp 3.0 3.0
MJ2413 Energy and Environment
Technical profile - Energy
50547 6.0 hp 3.0 3.0
SE2126 Material Mechanics
Technical profile - Solid Mechanics
50228 9.0 hp 4.5 4.5
SE2132 Applied Elasticity with FEM
Technical profile - Solid Mechanics
51033 9.0 hp 4.5 4.5
MF2010 Component Design
Technical profile - Construction
51853 6.0 hp 6.0
MF2102 Machine Design Project Course
Technical profile - Construction
50406 6.0 hp 6.0
SE2860 FEM Modelling
Technical profile - Solid Mechanics
51041 8.0 hp 8.0
MG2022 Advanced CAD Modelling and Rapid Prototyping, Project Course
Technical profile - Production
50296 6.0 hp 3.0 3.0
MG2130 Modelling and Simulation of Industrial Processes
Technical profile - Production
50017 9.0 hp 4.5 4.5
MF2024 Robust and Probabilistic Design
Technical profile - Construction
60091 6.0 hp 6.0
MJ2380 Introduction to Energy Systems Analysis and Applications
Technical profile - Energy
61471 9.0 hp 9.0
SE1025 FEM for Engineering Applications
Technical profile - Solid Mechanics
60023 6.0 hp 6.0
SE2139 Fracture Mechanics
Technical profile - Solid Mechanics
60676 6.0 hp 6.0
MF2011 Systems Engineering
Technical profile - Construction
60083 9.0 hp 4.0 5.0
MG2135 PLM - Product Lifecycle Management
Technical profile - Production
60105 9.0 hp 4.5 4.5
MF2019 CAD 3D-modelling and Visualization
Technical profile - Construction
60086 6.0 hp 6.0
MG2010 Modern Industrial Metrology
Technical profile - Production
60093 6.0 hp 6.0
MG2036 Computer Aided Manufacturing - CAM
Technical profile - Production
60100 6.0 hp 6.0
SE2121 Introduction to Biomechanics
Technical profile - Solid Mechanics
60685 9.0 hp 9.0
SE2134 Dynamic Problems in Solid Mechanics
Technical profile - Solid Mechanics
60687 7.5 hp 7.5

CMAST-students at Masters programme, Applied and Computational Mathematics (TTMAM)

A technical profile specified within the study year plan for Degree Programme in Mechanical Engineering must be chosen

One of the following profiles can be chosen during study year 4-5:

  • Technical profile Production and Energy
    MG2130 Modelling and Simulation of Industrial Processes 9 credits
    MJ2380 Introduction to Energy Systems Analysis and Applications 9 credits
  • Technical profile Solid Mechanics 
    SE1025 FEM for Engineering Applications 6 credits
    One of the following two courses must be chosen:
    SE2126 Material Mechanics 9 credits
    SE2132 Applied Elasticity with FEM 9 credits

    As well as one of the following courses must be chosen:
    SE2860 FEM Modelling 8 credits
    SE2137 Fatigue 6 credits
    SE2139 Fracture Mechanics 6 credits
    SE2134 Dynamic Problems in Solid Mechanics  7,5 credits
    SE2121 Introduction to Biomechanics 9 credits
  • Technical profile Construction
    Courses corresponding to at least 18 credits, listed below, shall be taken during study year 4-5:
    MF2101 Machine Design 6 credits
    MF2102 Machine Design Project Course 6 credits
    MF2010 Component Design 6 credits
    MF2011 Systems Engineering 9 credits
    MF2019 CAD 3D-modelling and Visualization 6 credits *
    MF2024 Robust and Probabilistic Design 6 credits
    * will be able to study in period 2 and 4

Technical profile Production and Energy
Courses listed below, within the profile, shall be taken during study year 4-5.

Technical profile Solid Mechanics
Within the profile, the course SE1025 should be read, as well as one of the courses SE2126 or SE2132.
In addition to these courses, one of the other conditionally optional courses within the profile, should be read in year 4-5.

Technical profile Construction
Courses corresponding to at least 18 credits, listed below, within the profile, shall be taken during study year 4-5.

Conditionally elective Appl.code Scope Study period
 1   2   3   4 
MF2101 Machine Design
Technical profile - Construction
50404 6.0 hp 6.0
SE2137 Fatigue
Technical profile - Solid Mechanics
51035 6.0 hp 6.0
SE2126 Material Mechanics
Technical profile - Solid Mechanics
50228 9.0 hp 4.5 4.5
SE2132 Applied Elasticity with FEM
Technical profile - Solid Mechanics
51033 9.0 hp 4.5 4.5
MF2010 Component Design
Technical profile - Construction
51853 6.0 hp 6.0
MF2102 Machine Design Project Course
Technical profile - Construction
50406 6.0 hp 6.0
SE2860 FEM Modelling
Technical profile - Solid Mechanics
51041 8.0 hp 8.0
MG2130 Modelling and Simulation of Industrial Processes
Technical profile - Production and Energy
50017 9.0 hp 4.5 4.5
MF2024 Robust and Probabilistic Design
Technical profile - Construction
60091 6.0 hp 6.0
MJ2380 Introduction to Energy Systems Analysis and Applications
Technical profile - Production and Energy
61471 9.0 hp 9.0
SE1025 FEM for Engineering Applications
Technical profile - Solid Mechanics
60023 6.0 hp 6.0
SE2139 Fracture Mechanics
Technical profile - Solid Mechanics
60676 6.0 hp 6.0
MF2011 Systems Engineering
Technical profile - Construction
60083 9.0 hp 4.0 5.0
MF2019 CAD 3D-modelling and Visualization
Technical profile - Construction
60086 6.0 hp 6.0
SE2121 Introduction to Biomechanics
Technical profile - Solid Mechanics
60685 9.0 hp 9.0
SE2134 Dynamic Problems in Solid Mechanics
Technical profile - Solid Mechanics
60687 7.5 hp 7.5

CMAST-students at Masters programme, Sustainable Technology (TSUTM)
A technical profile specified within the study year plan for Degree Programme in Mechanical Engineering must be chosen

One of the following profiles can be chosen during study year 4-5:

  • Technical profile Construction
    Courses corresponding to at least 18 credits, listed below, shall be taken during study year 4-5:
    MF2101 Machine Design 6 credits
    MF2102 Machine Design Project Course 6 credits
    MF2010 Component Design 6 credits
    MF2011 Systems Engineering 9 credits
    MF2019 CAD 3D-modelling and Visualization 6 credits *
    MF2024 Robust and Probabilistic Design 6 credits
    * will be able to study in period 2 and 4
  • Technical profile Energy
    MJ2413 Energy and Environment 6 credits
    MJ2411 Renewable Energy Technology 6 credits *
    MJ2380 Introduction to Energy Systems Analysis and Applications 9 credits
    *can also be chosen study year 5
  • Technical profile Production
    MG2029  Production Engineering - Planning and Control 6 credits
    (MG1024 Production in study year 3, is the eligibility course for MG2029)

    One of the following two courses must be chosen:

    MG2028 CAD and Other IT Tools in Industrial Processes 6 credits
    MG2130  Modelling and Simulation of Industrial Processes 9 credits
    As well as one of the following courses must be chosen, either study year 4 or 5:
    MG2009 Advanced Manufacturing Technology 6 credits
    MG2109 Advanced Manufacturing Technology, Extended Course 9 credits
    MG2110 Advanced Metrology 9 credits
    MG2022 Advanced CAD Modelling and Rapid Prototyping 6 credits *
    MG2135 PLM - Product Lifecycle Management 9 credits
    MG2036 Computer Aided Manufacturing - CAM 6 credits
    MG2038 Digital Factories 6 credits **
    MG2010 Modern Industrial Metrology 6 credits *
    * MG2028 prerequisites
    ** MG2130 prerequisites
  • Technical profile Solid Mechanics 
    SE1025 FEM for Engineering Applications 6 credits 

    One of the following two courses must be chosen:

    SE2126 Material Mechanics 9 credits
    SE2132 Applied Elasticity with FEM 9 credits

    As well as one of the following courses must be chosen:

    SE2860 FEM Modelling 8 credits
    SE2137 Fatigue 6 credits
    SE2139 Fracture Mechanics 6 credits 
    SE2134 Dynamic Problems in Solid Mechanics  7,5 credits
    SE2121 Introduction to Biomechanics 9 credits

Technical profile Construction
Courses corresponding to at least 18 credits, listed below, within the profile, shall be taken during study year 4-5.

Technical profile Energy
Courses listed below, within the profile, shall be taken during study year 4-5.

Technical profile Production
Within the profile, the course MG2029 should be read, as well as one of the courses MG2028 or MG2130.
In addition to these courses, one of the other conditionally optional courses within the profile, should be read in year 4-5.

Technical profile Solid Mechanics
Within the profile, the course SE1025 should be read, as well as one of the courses SE2126 or SE2132.
In addition to these courses, one of the other conditionally optional courses within the profile, should be read in year 4-5.

Conditionally elective Appl.code Scope Study period
 1   2   3   4 
MF2101 Machine Design
Technical profile - Construction
50404 6.0 hp 6.0
MG2029 Production Engineering - Planning and Control
Technical profile - Production
51439 6.0 hp 6.0
MG2038 Digital Factories
Technical profile - Production
50768 6.0 hp 6.0
SE2137 Fatigue
Technical profile - Solid Mechanics
51035 6.0 hp 6.0
MG2009 Advanced Manufacturing Technology
Technical profile - Production
50029 6.0 hp 4.5 1.5
MG2028 CAD and Other IT Tools in Industrial Processes
Technical profile - Production
51444 6.0 hp 1.5 4.5
MG2109 Advanced Manufacturing Technology, Extended Course
Technical profile - Production
50772 9.0 hp 4.5 4.5
MG2110 Advanced Metrology
Technical profile - Production
50774 9.0 hp 4.5 4.5
MJ2411 Renewable Energy Technology
Technical profile - Energy
50550 6.0 hp 3.0 3.0
MJ2413 Energy and Environment
Technical profile - Energy
50547 6.0 hp 3.0 3.0
SE2126 Material Mechanics
Technical profile - Solid Mechanics
50228 9.0 hp 4.5 4.5
SE2132 Applied Elasticity with FEM
Technical profile - Solid Mechanics
51033 9.0 hp 4.5 4.5
MF2010 Component Design
Technical profile - Construction
51853 6.0 hp 6.0
MF2102 Machine Design Project Course
Technical profile - Construction
50406 6.0 hp 6.0
SE2860 FEM Modelling
Technical profile - Solid Mechanics
51041 8.0 hp 8.0
MG2022 Advanced CAD Modelling and Rapid Prototyping, Project Course
Technical profile - Production
50296 6.0 hp 3.0 3.0
MG2130 Modelling and Simulation of Industrial Processes
Technical profile - Production
50017 9.0 hp 4.5 4.5
MF2024 Robust and Probabilistic Design
Technical profile - Construction
60091 6.0 hp 6.0
MJ2380 Introduction to Energy Systems Analysis and Applications
Technical profile - Energy
61471 9.0 hp 9.0
SE1025 FEM for Engineering Applications
Technical profile - Solid Mechanics
60023 6.0 hp 6.0
SE2139 Fracture Mechanics
Technical profile - Solid Mechanics
60676 6.0 hp 6.0
MF2011 Systems Engineering
Technical profile - Construction
60083 9.0 hp 4.0 5.0
MG2135 PLM - Product Lifecycle Management
Technical profile - Production
60105 9.0 hp 4.5 4.5
MF2019 CAD 3D-modelling and Visualization
Technical profile - Construction
60086 6.0 hp 6.0
MG2010 Modern Industrial Metrology
Technical profile - Production
60093 6.0 hp 6.0
MG2036 Computer Aided Manufacturing - CAM
Technical profile - Production
60100 6.0 hp 6.0
SE2121 Introduction to Biomechanics
Technical profile - Solid Mechanics
60685 9.0 hp 9.0
SE2134 Dynamic Problems in Solid Mechanics
Technical profile - Solid Mechanics
60687 7.5 hp 7.5