Appendix 1: Course list

Degree Programme in Mechanical Engineering (CMAST), Programme syllabus for studies starting in autumn 2019

General courses

Year 1

Year 2

Conditionally elective courses

Supplementary information

 

Information regarding conditionally elective courses

The course MG1028 is mandatory for students admitted to CMAST from Degree Programme Open Entrance (COPEN)

Year 3

Conditionally elective courses

Supplementary information

Information is based upon the curriculum for academic year 2020/2021. Changes may occur.

Master's programmes leading to Master of Science in Engineering degree:

  • Aerospace Engineering
  • Vehicle Engineering
  • Industrial Management
  • Integrated Product Design
    Track, Innovation Management and Product Development
  • Engineering Design
    Track, Combustion Engineering
    Track, Machine Design
    Track, Mechatronics
  • Naval Architecture
  • Applied and Computational Mathematics
  • Nuclear Energy Engineering
  • Production Engineering Management
    Recommended profiles: Industrial IT-systems, Industrial welding, Production engineering and management and Production development
  • Sustainable Energy Engineering
  • Sustainable Technology
  • Engineering Mechanics
    Track, Fluid Mechanics
    Track, Solid Mechanics
    Track, Sound and Vibrations

Some Masterprograms require specific courses during year 3.

Information regarding conditionally elective courses

A degree project for Degree of Bachelor must be read during study year 3, independently of chosen masters programme.

Year 4

Supplementary information

Information is based upon the curriculum for academic year 2019/2020. Changes may occur.

Master's programmes leading to Master of Science in Engineering degree:

  • Aerospace Engineering
  • Vehicle Engineering
  • Sustainable Energy Engineering
  • Industrial Management (Technical Profile: Engineering Design, Energy, Production or Solid Mechanics)
  • Integrated Product Design
    Track, Innovation Management and Product Development
  • Production Engineering Management
  • Engineering Design
    Track, Combustion Engineering
    Track, Machine Design
    Track, Mechatronics
  • Nuclear Energy Engineering
  • Applied and Computational Mathematics (Technical Profile: Production and Energy or Solid Mechanics)
  • Naval Architecture
  • Sustainable Technology (Technical Profile: Engineering Design, Energy, Production or Solid Mechanics)
  • Engineering Mechanics
    Track, Fluid Mechanics
    Track, Solid Mechanics
    Track, Sound and Vibrations

Some Masterprograms require specific courses during year 3.

Master, Aerospece Engineering (AEE)

Year 3

Conditionally elective courses

Recommended courses

Supplementary information

Information is based upon the curriculum for academic year 2018/2019. Changes may occur.

One of the conditionally elective courses SG1217 or SG1220 must be chosen.

One of the following degree project for a Degree of Bachelor must be chosen, independently of chosen masters programme:

  • SA118X
  • MF131X
  • MF133X
  • MF123X
  • MG110X
  • MJ146X

Master, Vehicle Engineering (FOR)

Year 3

Conditionally elective courses

Supplementary information

Information is based upon the curriculum for academic year 2019/2020. Changes may occur.

At least one of the conditionally elective courses must be chosen.

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme (see list of conditional elective courses presented under the heading "General courses").

Master, Industrial Management (INE)

Year 3

Conditionally elective courses

Recommended courses

Supplementary information

Information is based upon the curriculum for academic year 2020/2021. Changes may occur.

CMAST-students at Masters progrmme, Industrial Management (TINEM)
A technical profile specified within the study year plan for Degree Programme in Mechanical Engineering must be chosen

One of the following profiles can be chosen:

  • Technical profile Construction
    MF2024 Robust and Probabilistic Design
    MF2031 Advanced Prototyping*
    *also possible to study in period 1 or period 2

    One of the following two courses must be chosen:

    MF2010 Component Design
    MF2011 Systems Engineering
  • Technical profile Energy
    MJ2413 Energy and Environment
    MJ2411 Renewable Energy Technology*
    MJ2380 Introduction to Energy Systems Analysis and Applications
    *can also be chosen study year 5
  • Technical profile Production
    MG2029  Production Engineering - Planning and Control
    Notice! MG1024 Production must be chosen study year 3 to fulfil the requirements for MG2029

    One of the following two courses must be chosen:

    MG2028 CAD and Other IT Tools in Industrial Processes
    MG2130  Modelling and Simulation of Industrial Processes
    As well as one of the following courses must be chosen, either study year 4 or 5:
    MG2009 Advanced Manufacturing Technology
    MG2109 Advanced Manufacturing Technology, Extended Course
    MG2110 Advanced Metrology
    MG2022 Advanced CAD Modelling and Rapid Prototyping*
    MG2135 PLM - Product Lifecycle Management
    MG2036 Computer Aided Manufacturing - CAM
    MG2038 Digital Factories**
    MG2010 Modern Industrial Metrology*
    *MG2028 prerequisites
    **MG2130 prerequisites
  • Technical profile Solid Mechanics 
    SE1025 FEM for Engineering Applications

    One of the following two courses must be chosen:

    SE2126 Material Mechanics
    SE2132 Applied Elasticity with FEM

    As well as one of the following courses must be chosen:

    SE2860 FEM Modelling
    SE2129 Fracture Mechanics and Fatigue
    SE2134 Dynamic Problems in Solid Mechanics
    SE2121 Introduction to Biomechanics

Information regarding conditionally elective courses

At least one of the conditionally elective courses must be chosen.

Year 4

Supplementary information

Information is based upon the curriculum for academic year 2018/2019. Changes may occur.

CMAST-students at Masters programme, Industrial Management (TINEM)
A technical profile specified within the study year plan for Degree Programme in Mechanical Engineering must be chosen

One of the following profiles can be chosen during study year 4-5:

  • Technical profile Construction
    Courses corresponding to at least 18 credits, listed below, shall be taken during study year 4-5:
    MF2101 Machine Design 6 credits
    MF2102 Machine Design Project 6 credits
    MF2010 Component Design 6 credits
    MF2011 Systems Engineering 9 credits
    MF2019 CAD 3D-modelling and Visualization 6 credits *
    MF2024 Robust and Probabilistic Design 6 credits
    * will be able to study in period 2 and 4
  • Technical profile Energy
    MJ2413 Energy and Environment 6 credits
    MJ2411 Renewable Energy Technology 6 credits *
    MJ2380 Introduction to Energy Systems Analysis and Applications 9 credits
    *can also be chosen study year 5
  • Technical profile Production
    MG2029  Production Engineering - Planning and Control 6 credits
    (MG1024 Production in study year 3, is the eligibility course for MG2029)

    One of the following two courses must be chosen:

    MG2028 CAD and Other IT Tools in Industrial Processes 6 credits
    MG2130  Modelling and Simulation of Industrial Processes 9 credits
    As well as one of the following courses must be chosen, either study year 4 or 5:
    MG2009 Advanced Manufacturing Technology 6 credits
    MG2109 Advanced Manufacturing Technology, Extended Course 9 credits
    MG2110 Advanced Metrology 9 credits
    MG2022 Advanced CAD Modelling and Rapid Prototyping 6 credits *
    MG2135 PLM - Product Lifecycle Management 9 credits
    MG2036 Computer Aided Manufacturing - CAM 6 credits
    MG2038 Digital Factories 6 credits **
    MG2010 Modern Industrial Metrology 6 credits *
    * MG2028 prerequisites
    ** MG2130 prerequisites
  • Technical profile Solid Mechanics 
    SE1025 FEM for Engineering Applications 6 credits 

    One of the following two courses must be chosen:

    SE2126 Material Mechanics 9 credits
    SE2132 Applied Elasticity with FEM 9 credits

    As well as one of the following courses must be chosen:

    SE2860 FEM Modelling 8 credits
    SE2137 Fatigue 6 credits
    SE2139 Fracture Mechanics 6 credits 
    SE2134 Dynamic Problems in Solid Mechanics  7,5 credits
    SE2121 Introduction to Biomechanics 9 credits

International Profile, french (INTF)

Year 2

Conditionally elective courses

Supplementary information

 

Information regarding conditionally elective courses

The course MG1028 is mandatory for students admitted to CMAST from Degree Programme Open Entrance (COPEN)

Year 3

Supplementary information

Information is based upon the curriculum for academic year 2020/2021. Changes may occur.

During study year 3, students at an international profile choose one of the specialisations included in the regular curriculum for the degree programme in Mechanical Engineering.

The courses SF1915 Probability Theory and Statistics and MH1004 Engineering Materials, should not be read by students attending the international profile.However, the following courses should be included study year 3, MG1026 Manufacturing Technology and MJ1112 Applied Thermodynamics

The exchange semester is during year 3 fall or spring, depending on the exchange university.

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

Master's programmes leading to Master of Science in Engineering degree:

  • Aerospace Engineering
  • Vehicle Engineering
  • Industrial Management
  • Integrated Product Design
    Track, Innovation Management and Product Development
  • Engineering Design
    Track, Combustion Engineering
    Track, Machine Design
    Track, Mechatronics
  • Naval Architecture
  • Applied and Computational Mathematics
  • Nuclear Energy Engineering
  • Production Engineering Management
    Recommended profiles: Industrial IT-systems, Industrial welding, Production engineering and management and Production development
  • Sustainable Energy Engineering
  • Sustainable Technology
  • Engineering Mechanics
    Track, Fluid Mechanics
    Track, Solid Mechanics
    Track, Sound and Vibrations

Some Masterprograms require specific courses during study year 3.

International Profile, spanish (INTS)

Year 2

Conditionally elective courses

Supplementary information

 

Information regarding conditionally elective courses

The course MG1028 is mandatory for students admitted to CMAST from Degree Programme Open Entrance (COPEN)

Year 3

Supplementary information

Information is based upon the curriculum for academic year 2020/2021. Changes may occur.

During study year 3, students at an international profile choose one of the specialisations included in the regular curriculum for the degree programme in Mechanical Engineering.

The courses SF1915 Probability Theory and Statistics and MH1004 Engineering Materials, should not be read by students attending the international profile.However, the following courses should be included study year 3, MG1026 Manufacturing Technology and MJ1112 Applied Thermodynamics

The exchange semester is during year 3 fall or spring, depending on the exchange university.

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

Master's programmes leading to Master of Science in Engineering degree:

  • Aerospace Engineering
  • Vehicle Engineering
  • Industrial Management
  • Integrated Product Design
    Track, Innovation Management and Product Development
  • Engineering Design
    Track, Combustion Engineering
    Track, Machine Design
    Track, Mechatronics
  • Naval Architecture
  • Applied and Computational Mathematics
  • Nuclear Energy Engineering
  • Production Engineering Management
    Recommended profiles: Industrial IT-systems, Industrial welding, Production engineering and management and Production development
  • Sustainable Energy Engineering
  • Sustainable Technology
  • Engineering Mechanics
    Track, Fluid Mechanics
    Track, Solid Mechanics
    Track, Sound and Vibrations

Some Masterprograms require specific courses during study year 3.

International Profile, german (INTT)

Year 2

Conditionally elective courses

Supplementary information

 

Information regarding conditionally elective courses

The course MG1028 is mandatory for students admitted to CMAST from Degree Programme Open Entrance (COPEN)

Year 3

Supplementary information

Information is based upon the curriculum for academic year 2020/2021. Changes may occur.

During study year 3, students at an international profile choose one of the specialisations included in the regular curriculum for the degree programme in Mechanical Engineering.

The courses SF1915 Probability Theory and Statistics and MH1004 Engineering Materials, should not be read by students attending the international profile.However, the following courses should be included study year 3, MG1026 Manufacturing Technology and MJ1112 Applied Thermodynamics

The exchange semester is during year 3 fall or spring, depending on the exchange university.

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

Master's programmes leading to Master of Science in Engineering degree:

  • Aerospace Engineering
  • Vehicle Engineering
  • Industrial Management
  • Integrated Product Design
    Track, Innovation Management and Product Development
  • Engineering Design
    Track, Combustion Engineering
    Track, Machine Design
    Track, Mechatronics
  • Naval Architecture
  • Applied and Computational Mathematics
  • Nuclear Energy Engineering
  • Production Engineering Management
    Recommended profiles: Industrial IT-systems, Industrial welding, Production engineering and management and Production development
  • Sustainable Energy Engineering
  • Sustainable Technology
  • Engineering Mechanics
    Track, Fluid Mechanics
    Track, Solid Mechanics
    Track, Sound and Vibrations

Some Masterprograms require specific courses during study year 3.

Track, Innovation Management and Product Development (IPDE)

Year 3

Conditionally elective courses

Supplementary information

Information is based upon the curriculum for academic year 2017/2018. Changes may occur.

At least two of the conditionally elective courses must be chosen, and one of the following degree project for a Degree of Bachelor must be chosen, independently of chosen masters programme:

  • SA118X
  • MF131X
  • MF133X
  • MF123X
  • MG110X
  • MJ146X

Track, Combustion Engineering (IPUA)

Year 3

Conditionally elective courses

Supplementary information

Information is based upon the curriculum for academic year 2017/2018. Changes may occur.

At least one of the conditionally elective courses must be chosen, and one of the following degree project for a Degree of Bachelor must be chosen, independently of chosen masters programme:

  • SA118X
  • MF131X
  • MF133X
  • MF123X
  • MG110X
  • MJ146X

Track, Machine Design (IPUB)

Year 3

Conditionally elective courses

Supplementary information

Information is based upon the curriculum for academic year 2017/2018. Changes may occur.

At least two of the conditionally elective courses must be chosen, and one of the following degree project for a Degree of Bachelor must be chosen, independently of chosen masters programme:

  • SA118X
  • MF131X
  • MF133X
  • MF123X
  • MG110X
  • MJ146X

Track, Mechatronics (IPUC)

Year 3

Conditionally elective courses

Recommended courses

Supplementary information

Information is based upon the curriculum for academic year 2017/2018. Changes may occur.

One of the following degree project for Degree of Bachelor must be chosen, independently of chosen masters programme:

  • SA118X
  • MF131X
  • MF133X
  • MF123X
  • MG110X
  • MJ146X

Industrial Technology and Sustainability (ITSY)

Master, Naval Architecture (MRS)

Year 3

Conditionally elective courses

Supplementary information

Information is based upon the curriculum for academic year 2017/2018. Changes may occur.

At least two of the conditionally elective courses must be chosen, and at least one of the courses SG1217 or SG1220 must be chosen.

One of the following degree project for Degree of Bachelor must be chosen, independently of chosen masters programme:

  • SA118X
  • MF131X
  • MF133X
  • MF123X
  • MG110X
  • MJ146X

Master, Mathematics (MTH)

Year 3

Conditionally elective courses

Supplementary information

Information is based upon the curriculum for academic year 2017/2018. Changes may occur.

At least two of the conditionally elective courses must be chosen, and one of the following degree project for a Degree of Bachelor must be chosen, independently of chosen masters programme:

  • SA118X
  • MF131X
  • MF133X
  • MF123X
  • MG110X
  • MJ146X

Year 4

Supplementary information

Information is based upon the curriculum for academic year 2018/2019. Changes may occur.

CMAST-students at Masters programme, Applied and Computational Mathematics (TTMAM)

A technical profile specified within the study year plan for Degree Programme in Mechanical Engineering must be chosen

One of the following profiles can be chosen during study year 4-5:

  • Technical profile Production and Energy
    MG2130 Modelling and Simulation of Industrial Processes 9 credits
    MJ2380 Introduction to Energy Systems Analysis and Applications 9 credits
  • Technical profile Solid Mechanics 
    SE1025 FEM for Engineering Applications 6 credits
    One of the following two courses must be chosen:
    SE2126 Material Mechanics 9 credits
    SE2132 Applied Elasticity with FEM 9 credits

    As well as one of the following courses must be chosen:
    SE2860 FEM Modelling 8 credits
    SE2137 Fatigue 6 credits
    SE2139 Fracture Mechanics 6 credits
    SE2134 Dynamic Problems in Solid Mechanics  7,5 credits
    SE2121 Introduction to Biomechanics 9 credits
  • Technical profile Construction
    Courses corresponding to at least 18 credits, listed below, shall be taken during study year 4-5:
    MF2101 Machine Design 6 credits
    MF2102 Machine Design Project 6 credits
    MF2010 Component Design 6 credits
    MF2011 Systems Engineering 9 credits
    MF2019 CAD 3D-modelling and Visualization 6 credits *
    MF2024 Robust and Probabilistic Design 6 credits
    * will be able to study in period 2 and 4

Master, Nuclear Energy Engineering (NEE)

Year 3

Conditionally elective courses

Supplementary information

Information is based upon the curriculum for academic year 2017/2018. Changes may occur.

At least two of the conditionally elective courses must be chosen, and at least one of the courses SG1217 or SG1220 must be chosen.

One of the following degree project for Degree of Bachelor must be chosen, independently of chosen masters programme:

  • SA118X
  • MF131X
  • MF133X
  • MF123X
  • MG110X
  • MJ146X

Master, Production Engineering and Management (PRM)

Year 3

Conditionally elective courses

Recommended courses

Supplementary information

Information is based upon the curriculum for academic year 2017/2018. Changes may occur.

One of the following degree project for Degree of Bachelor must be chosen, independently of chosen masters programme:

  • SA118X
  • MF131X
  • MF133X
  • MF123X
  • MG110X
  • MJ146X

Master, Sustainable Energy Engineering (SUE)

Year 3

Conditionally elective courses

Recommended courses

Supplementary information

Information is based upon the curriculum for academic year 2017/2018. Changes may occur.

One of the conditionally elective courses SG1217 or SG1220 must be chosen.

One of the following degree project for Degree of Bachelor must be chosen, independently of chosen masters programme:

  • SA118X
  • MF131X
  • MF133X
  • MF123X
  • MG110X
  • MJ146X

Master, Sustainable Technology (SUT)

Year 3

Conditionally elective courses

Supplementary information

Information is based upon the curriculum for academic year 2017/2018. Changes may occur.

At least two of the conditionally elective courses must be chosen, and one of the following degree project for a Degree of Bachelor must be chosen, independently of chosen masters programme:

  • SA118X
  • MF131X
  • MF133X
  • MF123X
  • MG110X
  • MJ146X

Year 4

Supplementary information

Information is based upon the curriculum for academic year 2018/2019. Changes may occur.

CMAST-students at Masters programme, Sustainable Technology (TSUTM)
A technical profile specified within the study year plan for Degree Programme in Mechanical Engineering must be chosen

One of the following profiles can be chosen during study year 4-5:

  • Technical profile Construction
    Courses corresponding to at least 18 credits, listed below, shall be taken during study year 4-5:
    MF2101 Machine Design 6 credits
    MF2102 Machine Design Project 6 credits
    MF2010 Component Design 6 credits
    MF2011 Systems Engineering 9 credits
    MF2019 CAD 3D-modelling and Visualization 6 credits *
    MF2024 Robust and Probabilistic Design 6 credits
    * will be able to study in period 2 and 4
  • Technical profile Energy
    MJ2413 Energy and Environment 6 credits
    MJ2411 Renewable Energy Technology 6 credits *
    MJ2380 Introduction to Energy Systems Analysis and Applications 9 credits
    *can also be chosen study year 5
  • Technical profile Production
    MG2029  Production Engineering - Planning and Control 6 credits
    (MG1024 Production in study year 3, is the eligibility course for MG2029)

    One of the following two courses must be chosen:

    MG2028 CAD and Other IT Tools in Industrial Processes 6 credits
    MG2130  Modelling and Simulation of Industrial Processes 9 credits
    As well as one of the following courses must be chosen, either study year 4 or 5:
    MG2009 Advanced Manufacturing Technology 6 credits
    MG2109 Advanced Manufacturing Technology, Extended Course 9 credits
    MG2110 Advanced Metrology 9 credits
    MG2022 Advanced CAD Modelling and Rapid Prototyping 6 credits *
    MG2135 PLM - Product Lifecycle Management 9 credits
    MG2036 Computer Aided Manufacturing - CAM 6 credits
    MG2038 Digital Factories 6 credits **
    MG2010 Modern Industrial Metrology 6 credits *
    * MG2028 prerequisites
    ** MG2130 prerequisites
  • Technical profile Solid Mechanics 
    SE1025 FEM for Engineering Applications 6 credits 

    One of the following two courses must be chosen:

    SE2126 Material Mechanics 9 credits
    SE2132 Applied Elasticity with FEM 9 credits

    As well as one of the following courses must be chosen:

    SE2860 FEM Modelling 8 credits
    SE2137 Fatigue 6 credits
    SE2139 Fracture Mechanics 6 credits 
    SE2134 Dynamic Problems in Solid Mechanics  7,5 credits
    SE2121 Introduction to Biomechanics 9 credits

Track, Fluid Mechanics (TEMA)

Year 3

Conditionally elective courses

Supplementary information

Information is based upon the curriculum for academic year 2017/2018. Changes may occur.

At least two of the conditionally elective courses must be chosen, and at least one of the courses SG1217 or SG1220 must be chosen.

One of the following degree project for Degree of Bachelor must be chosen, independently of chosen masters programme:

  • SA118X
  • MF131X
  • MF133X
  • MF123X
  • MG110X
  • MJ146X

Track, Solid Mechanics (TEMB)

Year 3

Conditionally elective courses

Supplementary information

Information is based upon the curriculum for academic year 2017/2018. Changes may occur.

At least one of the conditionally elective courses must be chosen, and one of the following degree project for a Degree of Bachelor must be chosen, independently of chosen masters programme:

  • SA118X
  • MF131X
  • MF133X
  • MF123X
  • MG110X
  • MJ146X

Track, Sound and Vibrations (TEMC)

Year 3

Conditionally elective courses

Supplementary information

Information is based upon the curriculum for academic year 2017/2018. Changes may occur.

At least one of the conditionally elective courses must be chosen, and one of the following degree project for a Degree of Bachelor must be chosen, independently of chosen masters programme:

  • SA118X
  • MF131X
  • MF133X
  • MF123X
  • MG110X
  • MJ146X