Last edit: 13/02/2014
Approved: 13/02/2014

Structure of the education

The programme plan for the Master’s programme in Engineering in Media Technology partly consists of compulsory courses including one of the two specialisations during study years 1-3.  Study year 3 is concluded with a first level degree project worth 15 ECTS credits. 

During study years 4-5 the student follows the master's program of his/her choce. Within the master's program a second specialization is taken as well as courses on the second level. The programme is concluded during the spring semester of study year 5 with a second level degree project worth 30 ECTS credits.

The programme is structured such that the student, after three study years, can apply for a Bachelor's degree and then continue his/her studies on a Master’s programme at KTH or another university in Sweden or abroad or start a working career.

Academic year

The KTH academic year is 40 weeks, divided into four periods.  Each study period is followed by an examination period. There are also three re-examination periods.

For details about the structure of the academic year see http://www.kth.se/student/schema/1.1007?l=en_UK

Courses

The programme is course-based. Lists of courses are included in Appendix 1: Course list

The programme consists of compulsory, conditionally elective and elective courses. The compulsory courses are defined for each study year and specialisation in course lists. Course goals, prerequisites, contents and examination requirements can be found in the respective course plans in the course and program directory on the KTH student web..

Elective courses can be chosen from the KTH course offer for Master of Science in Engineering programmes.  Also, courses from other universities/higher education institutions can be recognized for credit, if the degree requirements are fulfilled.

For elective courses, the following restrictions apply:

  • Elective courses can not be taken in study year 1
  • Only under certain circumstances can elective courses be taken in study year 2
  • The number of higher education credits which can be taken per semester can be limited.

Grading system

Courses in the first and the second cycle are graded on a scale from A to F. A-E are passing grades, A is the highest grade. The grades pass (P) and fail (F) are used for courses under certain circumstances.

Conditions for participation in the programme

Semester enrollment

No later than November 15 and May 15  the student is required to make a study enrollment for the next semester at the CSC Program Office.

This study enrollment is required in order for the exam results to be registered.

Approved leave from studies

Approved leave from studies means that the student does not participate in the education during at least one study period.  The student has the right to return to the education at a time agreed upon, and has the right to participate in the examination of non-finished courses.

Application for an approved leave is done on according to instructions from the CSC program office. When the student decides to return to the education, he/she is required to re-enroll to the studies.

Selection of courses

From study year 3 and on the student is responsible  for applying to all courses he/she wishes to take.  This also applies to compulsory courses.  The application for admission to a course is done according to instructions from the CSC school no later than

May 15th for the fall semester
November 15th for the spring semester

Applications made after this date are only granted if there are vacancies in the courses. Applications to language courses with prerequisites should be preceded by a qualification test. 

In a few courses, the number of participants is limited. Selection is done by the school responsible for the course.

Admission to compulsory courses during study yerars 1–2 is, in most cases, automatic. Students wishing to study an individual specialization or choosing among alternative compulsory courses have to submit a special form.

Selection of conditionally elective courses i mathematics

The program offers a number of conditionally elective courses in mathematics that can be taken from study year 2. The student must take at least two of these in order to fulfill the requirements for a degree. Application for a conditionally elective course in mathematics is made on a form submitted to the CSC program office.

Choice of specialization

During the third study year the student follows one of the specializations offered. The choice of specialization, courses to be taken within the specialization and any elective courses are done according to instructions from the CSC program office.

Choice of master's program

The student must apply for the master's program he/she wishes to follow during study years 4–5 according to instructions given by the CSC program office.

Course registration

The student must register with the school responsible for the course at the start of each course, and also report to the school responsible for the course if the studies are discontinued.

Registration to a course requires formal acceptance to the course (by the school responsible for the course). Applications should be according to instructions from the CSC school. 

Conditions for being promoted to the next level
The following promotion requirements apply in order to participate in the next level of the education.

Requirements for promotion from study year 1 to study year 2:
A total of at least 45 ECTS credits from study year 1  must be completed.

Requirements for promotion from study year 2 to study year 3:
A total of at least 90 ECTS credits from study years 1 and 2 must be completed at least 50 higher education credits from study year 1.

Requirements for promotion from study year 3 to study year 4:
A total of at least 150 ECTS credits from study years  1-3 must be completed whereof 110 ECTS credits from study year 1-2, and the first level degree project.

Requirements for promotion from study year 4 to study year 5:
In addition to what applies for promotion to study 4, at least 45 higher education credits from study year 4 must be completed.

Individual study plan

Students who do not fulfill these requirements must  – in cooperation with the CSC program office – make an individual study plan for continued studies. 

Please see the KTH regulations: http://intra.kth.se/regelverk/utbildning-forskning/grundutbildning/1.27217?l=en_UK

Recognition of previous academic studies

Credits for studies at another university can be received. An application form can be found on the KTH Student pages.

The application form is submitted to the CSC program office.

For in-depth information about the KTH policy for crediting previous studies, see http://intra.kth.se/regelverk/utbildning-forskning/grundutbildning/prestationer/1.27200?l=en_UK

Studies abroad

Students at the Media Technology program have the opportunity to study one or two semesters abroad through agreements agreements KTH has with universities within and outside the EU. Exchange studies are appropriate during the fourth or fifth study years. It is also possible to make the final degree project (second cycle) abroad.

For more information contact the international coordinator at CSC.

Degree project

Degree project, first cycle
A degree project of 15 ECTS credits (first cycle) is done during study year 3. 

KTH comprehensive rules and guidelines for degree projects of 15 ECTS credits for Degree of Bachelor of Science 180 ECTS credits, and grading of the project are found in the KTH regulations.

http://intra.kth.se/regelverk/utbildning-forskning/grundutbildning/examensarbete/1.27211?l=en_UK

Degree project, second cycle

A second degree project of 30 ECTS credits (second cycle) is done during study year 5. 

KTH comprehensive rules and guidelines for degree projects of 30 ECTS credits for Degree of Master of Science in Engineering, Degree Programme in Computer Science and Technology 300 ECTS credits, and grading of the project is found in the KTH regulations.

http://intra.kth.se/regelverk/utbildning-forskning/grundutbildning/examensarbete/1.27205

Second cycle degree project for the Degree of Master of Science in Engineering can be performed in the following subjects:
Media Technology, Computer Science, Electroacoustics, Musical Acoustics, Human-Computer Interaction and Speech Communication.

Other subjects for the degree project may be considered upon application. For more information, contact the CSC program office.

It is the responsibility of the student to find a suitable project task.

Degree

Application for graduation
Students may apply for the following degrees: Degree of Bachelor of Science and Degree of Master of Science in Engineering, Degree Programme in Media Technology. Students can also request for Degree of Master of Science (Two Years) if the requirements for this degree are met.

Instructions for the application are available on the KTH student web.

Conditions for the Degree of Bachelor of Science 180 ECTS credits 
The Degree of Bachelor of Science is received if the student applies for graduation after the completion of the 3rd study year and fulfills the national degree requirements and and has completed all courses within the program corresponding to 180 ECTS credits, including 

  • courses of at least 25 ECTS credits within mathematics-natural sciences,
  • courses of at least 90 ECTS credits (including 15 ECTS credits from the degree project) with successive progression in the main field of education.

Degree name
Teknologie kandidatexamen
Degree of Bachelor of Science
 

Conditions for the Degree of Master of Science in Engineering 300 ECTS credits 
The Master of Science in Engineering degree is received after completing the programme. The programme is designed so that the student fulfills the national degree requirements and has completed courses corresponding to 300 ECTS credits, including

  • courses of at least 45 ECTS credits within mathematics-natural sciences, and, in addition, courses of at least 180 higher ECTS credits (including 30 ECTS credits from the degree project) in the subjects central to the technical area
  • courses of at least 90 ECTS credits in the second cycle, whereof at least 60 ECTS credits (including 30 ECTS credits from degree project) in the subjects central to the technical area, i.e. media technology 

Degree name
Civilingenjörsexamen
Degree of Master of Science in Engineering, Degree Programme in Computer Science and Technology

Conditions for Degree of Master of Science (Two Years) 120 ECTS credits.
See KTH regulations (see link below).

Degree name
Teknologie masterexamen
Degree of Master of Science (Two Years)

Information on degree requirements in the KTH regulations:

http://intra.kth.se/regelverk/utbildning-forskning/grundutbildning/examina/1.27227?l=en_UK