Last edit: 05/10/2012
Structure of the education
The study year for KTH’s education is divided into four periods. Every study period is followed by an exam period consisting of two rest days and at least five test days. Beyond the four ordinary exam periods, there are three re-exam periods given: after Christmas, after the study year’s last ordinary exam period and directly before the study years first study period.
The study year consists of 40 weeks. Under certain circumstances, studies can take place outside the study year.
The programme is course-based. Lists of courses are included in Appendix 1: Course list
The programme is composed of obligatory, selectable and optional courses. The obligatory courses are defined for every course in the teaching and time schedules. The different courses’ goals, prerequisites, contents and course examination specifications, can be found in the course plans.
In Engineering Physics, there is a maximum of 25 credits which can be allocated to optional courses. This applies to cycle and depth requirements for the degree to be fulfilled. Optional courses can be taken at KTH or at another university and be credited (see section about recognition of previous studies). However, the following restrictions apply:
- Optional courses may not overlap existing program courses
- Preparatory courses for higher education may not count as optional courses
- Courses within the subject on a lower level than the existing program courses may not be counted as optional courses.
Courses in the first and the second cycle are graded on a scale from A to F. A-E are passing grades, A is the highest grade. The grades pass (P) and fail (F) are used for courses under certain circumstances.
When the grading systems differ very much between different countries, the grades from studies abroad will not be transferred to the KTH grading system.
Conditions for participation in the programme
Conditions for being promoted to the next level
The following conditions apply in order to participate in the next study year:
For studies in year 2:
At least 45 credits from study year 1 must be completed up to the August period.
For studies in year 3:
At least 90 credits from study years 1 and 2 must be completed up to the August period, of which 50 credits have to be from the first year. Students who have not met the requirements above must meet with a study plan counsellor and create an individual study plan in order to continue.
Requirements for advancement from grade 3 to grade 4:
A total of at least 150 credits from grades 1-3 to be completed through August period, with at least 110 credits from grades 1-2. For students in the study for a Bachelor's degree includes an obligatory part, this shall be completed prior studies in year 4 begins.
Registration and promotion to grade 4 in engineering programs:
Prior to graduate studies in grades four in engineering programs, students should choose a master program. Which Degree leading to M.Sc. shown in Science program's curriculum.
Choice of Masters takes place during the period May 1 to 15.From the autumn term 2012 choice and admission of the masters program is administrated by the Division of Student Service. To the master leading to M.Sc. is no place limitation. Master Students who wish to choose a program that does not lead to an MSc make their choice in the external admissions round in January, for these may place restrictions occur.
For advancement (permission) to grade 4 / admission to master's student in the five-year training program, the following requirements:
- A total of at least 150 credits from grades 1-3have to be completed and of those at least 110 credits from grades 1 - 2.
- The course Degree project, first level, must be completed prior studies in the masters program year 1 begins.
In addition, there are special eligibility requirements for each master.
Students who have choosen a masters program before grade 4 in the MSC program and is authorisezed to it will be registrered on it.
The student is responsible for making semester registration for each semester. This is done via My pages from 1 week before the semester even 1 week after the semester. Registration means that the student is active and is in turn a prerequisite for the study results to be reported and to CSN to pay the awarded student.
Temporary postponement means that the student does not participate in courses during at least one term. Approved temporary postponement gives the student the right to return to the studies at a given point in time. During the temporary postponement, the student is able to complete courses and participate in exams in unfinished courses.
The application for temporary postponement is submitted to the programme office, which approves or denies the application. When the student intends to return to the studies, a new application must be submitted.
Registration of a course assumes course selection in Ladok. The course selection process can be done on the web or through the student’s programme office. Registration of a course is done by the departement giving the course. Registration must be finished by around three weeks after the course’s start. If the student decides to withdraw from a course, the student must notify the institution of this.
General master with individual course package
Within the engineering program, it is possible to put together combinations of courses at the advanced level to a general Masters with an individual course package. However, it may be appropriate to first determine which choice available within the existing master's programs.
To read an individual course package an application for individual course package is required.
Form is available here: http://www.kth.se/dokument/student/sci/blankett/individuell_studieinriktning.pdf
In the application, the idea with the individual course package has to be formulated and the courses to be included defined. Regarding the thesis there must be a preliminary approval sought from a possible examiner at the appropriate department.
It is the student's responsibility to check if the courses are offered each year, or if there are other subject if and when a course will be given. It's important to know that an individual course package involves a certain amount of unavoidable scheduling conflicts.
The application submitted to the Office of SCI over the same period as the master of selection (1-15 May). Decision on the application is approved or not taken by the program coordinator and information sent by e-mail.
Recognition of previous academic studies
The right to the recognition of previous academic studies is an important element in order to support the mobility within the country and between countries, for the higher education’s internationalization work, and for “life-long” learning. KTH must have an open method to recognize previous academic studies. Recognition must therefore happen even if the exact programme does not exist at KTH or if the contents in, for example, the course plans does not exactly correspond to KTH’s. The requirements which KTH normally applies to programme level and quality will be considered in the recognition of previous academic studies. Recognition which is decided at another institution in Sweden will normally be accepted by KTH.
A student at KTH who carries out studies at another university within the boundaries of an exchange agreement has the right to receive advanced notification about recognition of previous studies. Such a notification can, for example, be given through a Learning Agreement which must be established and signed by the coordinator at KTH, contact person at the university abroad and the student.
The student at KTH has the right to receive a trial recognition of previous academic studies.
Even degree project work can be recognized. KTH considers it, nevertheless, appropriate that the degree project work is performed at KTH (within a school or at a company with a supervisor from KTH).
The decision about the recognition of courses can be appealed at the Board of Appeals of higher education. The appeal must be submitted to KTH, at the latest, three weeks from the day that the student received the decision.
In order for a trial recognition of previous academic studies, the applicant must normally be able to document that he/she has graduated in courses (corresponding) with at least passing results. The study performance is graded by the university where the exam was taken, not by the recognition of KTH.
In engineering programs, it is possible to read parts of the studies under one of KTH's exchange agreements. Please contact the international coordinator at the office: email@example.com.
The application period for a replacement is in the middle of January and most contracts are written for one year of study and or thesis.
More and detailed information about exchange studies can be found here:
The program includes a thesis for the degree (first level) in the spring of year 3 of 15 credits. This represents approximately 5 months of half-time studies. To be allowed to begin the workat least 120 credits, of which 108 credits from the deck block, must be completed until the second period.
Master of Engineering
In the programme, a degree project must be done corresponding to a course of 30 credits which implies around 5 months of full-time studies.
- The degree project is normally carried out within the central subject for the programme’s technical area
- The degree project may not be started before the assignment is approved by the examiner at the chosen institution and is submitted to the programme office using a special form.
- The main part of the studies, at least 240 credits, must be completed. The student may not have more than two unfinished courses of the obligatory base block in years 1-3.
- The examiner is responsible to ensure that the student the appropriate knowledge for the chosen assignment.
- The degree project is founded on that knowledge which has been attained throughout the entire study time and must normally be carried out during the last term within the master programme which the student chose. If the student wishes to carry out the degree project within another subject area, this must be approved by the programme office.
- The degree project is done at the end of the programme in order to show that the student is capable of independently applying his/her knowledge attained during the study time.
- The degree project should show evidence of an independent, engineering-related/scientific work consisting of theoretical and/or experimental work with a corresponding written report. The degree project can include other items, for example, seminars, information gathering, student teaching, opposition, or other elements which the examiner or supervisor deems to be appropriate.
- The degree project is carried out individually or together with another student. In the latter case, the examiner ensures that each student’s work corresponds to the demands for an individual project work.
- The supervisor is appointed by the examiner.
The application form for the degree project (http://www.kth.se/dokument/student/sci/blankett/examensarbetesanmalan_100622.pdf) must be signed by the student and the examiner, before submitted to the programme office for approval. More detailed rules and guidelines for the degree project can be found at the respective department.
Link to grading of diploma work:
Conditions for the degree
The 300 credit degree
The Master of Science in Engineering degree is received after completing the programme. The programme is designed so that the student receiving the degree fulfils the national degree requirements and has fully completed courses corresponding to 300 credits, whence
- The mathematical/natural scientific subjects compose at least 45 credits and at least 180 (including 30 credits of degree project work) in the subjects central to the technical area.
- At least 90 credits in the second cycle, where at least 60 credits (including 30 credits of degree project work) in the subjects central to the technical area.
The name of the degree is a Master of Science in Engineering Degree.
Application for the degree
The student has the possibility to apply for three different degrees: Bachelor of Technology, Master of Science in Engineering, and Master’s Degree. The application for the degree is done on a special form (http://www.kth.se/student/studievagledning-kontakt/2.453/1.2872?programme=f) and is submitted to the School of Engineering Sciences.