Hoppa till huvudinnehållet
Till KTH:s startsida

MH2056 Materials Properties I 7.5 credits

Course memo Autumn 2026-10897

Version 2 – 10/22/2026, 8:55:50 AM

Course offering

Autumn 2026-10897 (Start date 26 Oct 2026, English)

Language Of Instruction

English

Offered By

ITM/Materials Science and Engineering

Course memo Autumn 2026

Headings denoted with an asterisk ( * ) is retrieved from the course syllabus version Autumn 2025

Content and learning outcomes

Course contents

The mechanical properties of metals in the form of:

  • Plastic deformation, seen from continuum and crystal plastic perspective
  • Dislocations and their properties
  • Hardening mechanisms
  • Static cracks with application on ductile and brittle fractures.
  • Fatigue
  • Creep

Intended learning outcomes

After passing the course, the student should be able to:

  1. Analyse and apply fundamental principles for deformation of metals.
  2. Identify and analyse typical fracture surfaces connected to the fundamental principles of fractures in metals.
  3. Apply fundamental models to describe mechanical properties in metallic materials.
  4. Assess and evaluate the importance of the mechanical properties of metals in relation to other engineering materials.

In order to:

Provide knowledge and tools to be able to plan, design, produce and criticise metal producing or metal using industry when mechanical properties are of importance.

Learning activities

The course consists of:

  • Two lectures and one exercise on plastic deformation
  • Two lectures and one exercise on dislocation theory
  • Three lectures and one exercise on strengthening mechanisms
  • One lecture each on fracture, fatique, and creep, and one exercise covering these topics
  • One guest lecture by an industry representative
  • One mandatory seminar
  • One written examination.

Questions for exercises are set and students answer them with the help of a teacher.

Course structure

Lectures: 22 h, Exercises: 8 h, Seminar: 4h, Exam: 5h.

The course is worth 7.5 credits, corresponding to approximately 200 hours of total study time. Non-scheduled time is therefore intended for self-study.

Preparations before course start

Recommended prerequisites

Basic knowledge of materials science corresponding to the course MH1034 Metallic Materials, or equivalent.

Specific preparations

Students who have not taken MH1034 Metallic Materials, or equivalent, are expected to acquire, through self-study, a basic understanding of the following topics:

  • Structure in metallic materials: common crystal structures of metals (BCC, FCC, HCP), stacking faults, crystallogaphic notation for crystal planes and directions (Miller indices), grain structure and grain boundaries, substitutional and interstitial atoms
  • Elastic and plastic deformation: stress, strain, Young's modulus, yielding and yield strength, ductility, toughness
  • Dislocations: the nature and types of dislocations (edge and screw), Burgers vector, slip systems in the common crystal structures.

Literature

Examination and completion

Grading scale

A, B, C, D, E, FX, F

Examination

  • SEM1 - Seminar, 2.0 credits, grading scale: P, F
  • TEN3 - Written exam, 5.5 credits, grading scale: A, B, C, D, E, FX, F

Based on recommendation from KTH’s coordinator for disabilities, the examiner will decide how to adapt an examination for students with documented disability.

The examiner may apply another examination format when re-examining individual students.

If the course is discontinued, students may request to be examined during the following two academic years.

The section below is not retrieved from the course syllabus:

TEN3 - Written exam, 5.5 credits

TEN3 covers all course topics and includes both theoretical questions and calculation problems, requiring you to demonstrate your understanding of the course material as well as your ability to apply the knowledge. TEN3 examines learning outcomes 1, 2, and 3.

The permitted aids are: the course formula collection, a calculator (mobile phones are not permitted), pens, ruler, and eraser. The course formula collection will be provided (you can't bring your own copy).

The final grade is determined based on the total exam score, before any possible supplementary work, according to the following grade limits: FX ≥ 45%, E ≥ 50%, D ≥ 60%, C ≥ 70%, B ≥ 80%, A ≥ 90%.

SEM1 - Seminar, 2.0 credits

SEM1 examines learning outcomes 1, 3, and 4 and is assessed through a group work comprising a written report and a seminar presentation.

Each group investigates and presents a special subject or phenomenon related to the mechanical properties of metals and alloys. To obtain a passing grade (P), the group must submit an approved written report and deliver an approved presentation, demonstrating a clear understanding of the topic, adequate preparation, and clear communication. All group members shall participate in the work and contribute to the presentation.

A declaration of individual contributions shall be provided before the seminar. If no declaration is submitted, it shall be assumed that all group members contributed equally.

Opportunity to complete the requirements via supplementary examination

Should the examination TEN3 be failed with a grade of FX, the examiner shall determine a suitable activity to enable the student to achieve a grade of E. Alternatively, the student may choose to take a new examination to achieve a higher grade. The examiner or a course teacher shall contact the student to initiate the complementary examination.

Should the examination SEM1 be failed with a grade of F, the examiner shall decide whether a complementary task to achieve a passing grade P is possible. The examiner or a course teacher shall contact the student to initiate a possible complementary examination.

Opportunity to raise an approved grade via renewed examination

There is no possibility to improve an approved grade for any exam or for the course overall once it is obtained.

Alternatives to missed activities or tasks

It is not permitted to undertake an alternative examination or task to replace activities and tasks missed without good reason. Any activites missed without good reason shall be considered to be failed.

Should you not be able to complete a required activity or task for a valid reason (e.g. illness, death in the family), please notify the examiner as soon as possible and an alternative arrangement shall be considered. If you know in advance that you will not be able to complete a required activity for a valid reason, e.g. clash with a mandatory activity in another course, please notfiy the examiner as soon as possible to discuss alternative assessment.

Reporting of exam results

Decisions on grades are announced through Ladok.

Ethical approach

  • All members of a group are responsible for the group's work.
  • In any assessment, every student shall honestly disclose any help received and sources used.
  • In an oral assessment, every student shall be able to present and answer questions about the entire assignment and solution.

Code of conduct for examination

Students are required to follow KTHs Code of conduct for examination. Failure to comply may result in disciplinary measures, including a warning or suspension.

Generative AI

Generative AI may be used responsibly in accordance with the specific rules provided in the course Canvas room.

Further information

No information inserted

Round Facts

Start date

26 Oct 2026

Course offering

  • Autumn 2026-10897

Language Of Instruction

English

Offered By

ITM/Materials Science and Engineering

Contacts

Course Coordinator

Teachers

Examiner

Other Contacts