Publications by Ann Cornell
Peer reviewed
Articles
[1]
T. Wang et al., "Pilot-scale study of membrane-coated cathodes : Achieving high cathodic efficiency and outstanding stability in chlorate electrolysis," Electrochimica Acta, vol. 497, 2024.
[2]
M. Rossini et al., "Rational design of membrane electrode assembly for anion exchange membrane water electrolysis systems," Journal of Power Sources, vol. 614, 2024.
[3]
O. Diaz-Morales et al., "Catalytic effects of molybdate and chromate–molybdate films deposited on platinum for efficient hydrogen evolution," Journal of chemical technology and biotechnology (1986), vol. 98, no. 5, pp. 1269-1278, 2023.
[4]
A. Anil et al., "Effect of pore mesostructure on the electrooxidation of glycerol on Pt mesoporous catalysts," Journal of Materials Chemistry A, vol. 11, no. 31, pp. 16570-16577, 2023.
[5]
I. Terekhina et al., "Electrocatalytic Oxidation of Glycerol to Value-Added Compounds on Pd Nanocrystals," ACS Applied Nano Materials, vol. 6, no. 13, pp. 11211-11220, 2023.
[6]
J. White et al., "Glycerol Electrooxidation at Industrially Relevant Current Densities Using Electrodeposited PdNi/Nifoam Catalysts in Aerated Alkaline Media," Journal of the Electrochemical Society, vol. 170, no. 8, 2023.
[7]
T. Wang et al., "Rational design of a membrane-coated cathode for selective electrochemical hydrogen evolution in chlorate electrolysis," Electrochimica Acta, vol. 466, pp. 143010, 2023.
[8]
J. White et al., "Electrodeposited PdNi on a Ni rotating disk electrode highly active for glycerol electrooxidation in alkaline conditions," Electrochimica Acta, vol. 403, 2022.
[9]
Z. Qiu et al., "Green hydrogen production via electrochemical conversion of components from alkaline carbohydrate degradation," International journal of hydrogen energy, vol. 47, no. 6, pp. 3644-3654, 2022.
[10]
X. Yu et al., "Hydrogen Evolution Linked to Selective Oxidation of Glycerol over CoMoO 4 —A Theoretically Predicted Catalyst," Advanced Energy Materials, vol. 12, no. 14, pp. 2103750-2103750, 2022.
[11]
X. Yu et al., "Electrocatalytic Glycerol Oxidation with Concurrent Hydrogen Evolution Utilizing an Efficient MoOx/Pt Catalyst," Small, vol. 17, no. 44, 2021.
[12]
D. Martin-Yerga, G. Henriksson and A. M. Cornell, "Insights on the ethanol oxidation reaction at electrodeposited PdNi catalysts under conditions of increased mass transport," International journal of hydrogen energy, vol. 46, no. 2, pp. 1615-1626, 2021.
[13]
A. Lindberg et al., "Sources of Oxygen Produced in the Chlorate Process Utilizing Dimensionally Stable Anode (DSA) Electrodes Doped by Sn and Sb," Industrial & Engineering Chemistry Research, vol. 60, no. 37, pp. 13505-13514, 2021.
[14]
D. Martín-Yerga et al., "Structure–Reactivity Effects of Biomass-based Hydroxyacids for Sustainable Electrochemical Hydrogen Production," ChemSusChem, vol. 14, no. 8, pp. 1902-1912, 2021.
[15]
S. Sandin et al., "Deactivation and selectivity for electrochemical ozone production at Ni- and Sb-doped SnO2 / Ti electrodes," Electrochimica Acta, vol. 335, 2020.
[16]
R. B. Araujo et al., "Elucidating the role of Ni to enhance the methanol oxidation reaction on Pd electrocatalysts," Electrochimica Acta, vol. 360, 2020.
[17]
H. Kim et al., "Feasibility of Chemically Modified Cellulose Nanofiber Membranes as Lithium-Ion Battery Separators," ACS Applied Materials and Interfaces, vol. 12, no. 37, pp. 41211-41222, 2020.
[18]
D. Martín-Yerga et al., "In situ catalyst reactivation for enhancing alcohol electro-oxidation and coupled hydrogen generation," Chemical Communications, vol. 56, no. 28, pp. 4011-4014, 2020.
[19]
A. Krüger et al., "Integration of water electrolysis for fossil-free steel production," International journal of hydrogen energy, vol. 45, no. 55, pp. 29966-29977, 2020.
[20]
B. Endrodi et al., "Selective electrochemical hydrogen evolution on cerium oxide protected catalyst surfaces," Electrochimica Acta, vol. 341, 2020.
[21]
D. Martín-Yerga, G. Henriksson and A. M. Cornell, "Effects of Incorporated Iron or Cobalt on the Ethanol Oxidation Activity of Nickel (Oxy)Hydroxides in Alkaline Media," Electrocatalysis, 2019.
[22]
B. Endrodi et al., "In situ formed vanadium-oxide cathode coatings for selective hydrogen production," Applied Catalysis B : Environmental, vol. 244, pp. 233-239, 2019.
[23]
H. Kim et al., "Lithium Ion Battery Separators Based On Carboxylated Cellulose Nanofibers From Wood," ACS Applied Energy Materials, vol. 2, pp. 1241-1250, 2019.
[24]
H. Kim et al., "One-step electro-precipitation of nanocellulose hydrogels on conducting substrates and its possible applications : coatings, composites, and energy devices," ACS Sustainable Chemistry and Engineering, vol. 7, no. 24, pp. 19415-19425, 2019.
[25]
B. Endrodi et al., "Selective Hydrogen Evolution on Manganese Oxide Coated Electrodes : New Cathodes for Sodium Chlorate Production," ACS Sustainable Chemistry and Engineering, vol. 7, no. 14, pp. 12170-12178, 2019.
[26]
B. Endrodi et al., "Suppressed oxygen evolution during chlorateformation from hypochlorite in the presenceof chromium(VI)," Journal of chemical technology and biotechnology (1986), vol. 94, no. 5, pp. 1520-1527, 2019.
[27]
M. Abbasi, J. Backstrom and A. M. Cornell, "Fabrication of Spin-Coated Ti/TiHx/Ni-Sb-SnO2 Electrode : Stability and Electrocatalytic Activity," Journal of the Electrochemical Society, vol. 165, no. 9, pp. H568-H574, 2018.
[28]
H. Lu et al., "Flexible and Lightweight Lithium-Ion Batteries Based on Cellulose Nanofibrils and Carbon Fibers," BATTERIES-BASEL, vol. 4, no. 2, 2018.
[29]
J. Lindberg et al., "Li Salt Anion Effect on O-2 Solubility in an Li-O-2 Battery," The Journal of Physical Chemistry C, vol. 122, no. 4, pp. 1913-1920, 2018.
[30]
K. Bouzek, A. M. Cornell and M. A. Rodrigo, "Preface on the special issue 2nd workshop on electrochemical engineering : new bridges for a new knowledge on electrochemical engineering," Journal of Applied Electrochemistry, vol. 48, no. 12, pp. 1305-1306, 2018.
[31]
A. Cornell, M. Rodrigo and K. Bouzek, "Special Issue : 11th European Symposium in Electrochemical Engineering (ESEE 11) Foreword," Journal of Applied Electrochemistry, vol. 48, no. 6, pp. 559-560, 2018.
[32]
B. Endrődi et al., "Towards sustainable chlorate production : The effect of permanganate addition on current efficiency," Journal of Cleaner Production, vol. 182, pp. 529-537, 2018.
[33]
B. Endrodi et al., "A review of chromium(VI) use in chlorate electrolysis : Functions, challenges and suggested alternatives," Electrochimica Acta, vol. 234, pp. 108-122, 2017.
[34]
S. Sandin et al., "Deposition efficiency in the preparation of ozone-producing nickel and antimony doped tin oxide anodes," Journal of Electrochemical Science and Engineering, vol. 7, no. 1, pp. 51-64, 2017.
[35]
H. Lu et al., "Effects of Different Manufacturing Processes on TEMPO-Oxidized Carboxylated Cellulose Nanofiber Performance as Binder for Flexible Lithium-Ion Batteries," ACS Applied Materials and Interfaces, vol. 9, no. 43, pp. 37712-37720, 2017.
[36]
H. Lu et al., "Li4Ti5O12 flexible, lightweight electrodes based on cellulose nanofibrils as binder and carbon fibers as current collectors for Li-ion batteries," Nano Energy, vol. 39, pp. 140-150, 2017.
[37]
J. Lindberg et al., "The effect of O2 concentration on the reaction mechanism in Li-O2 batteries," Journal of Electroanalytical Chemistry, vol. 797, pp. 1-7, 2017.
[38]
H. Lu et al., "Flexible Paper Electrodes for Li-Ion Batteries Using Low Amount of TEMPO-Oxidized Cellulose Nanofibrils as Binder," ACS Applied Materials and Interfaces, vol. 8, no. 28, pp. 18097-18106, 2016.
[39]
H. Lu et al., "Lignin as a Binder Material for Eco-Friendly Li-Ion Batteries," Materials, vol. 9, no. 3, 2016.
[40]
R. K. B. Karlsson and A. Cornell, "Selectivity between Oxygen and Chlorine Evolution in the Chlor-Alkali and Chlorate Processes," Chemical Reviews, vol. 116, no. 5, pp. 2982-3028, 2016.
[41]
R. K. B. Karlsson, A. Cornell and L. G. M. Pettersson, "Structural Changes in RuO2 during Electrochemical Hydrogen Evolution," The Journal of Physical Chemistry C, vol. 120, no. 13, pp. 7094-7102, 2016.
[42]
S. Sandin, R. K. B. Karlsson and A. Cornell, "Catalyzed and uncatalyzed decomposition of hypochlorite in dilute solutions," Industrial & Engineering Chemistry Research, vol. 54, no. 15, pp. 3767-3774, 2015.
[43]
R. K. B. Karlsson, A. Cornell and L. G. M. Pettersson, "The electrocatalytic properties of doped TiO2," Electrochimica Acta, vol. 180, pp. 514-527, 2015.
[44]
R. K. B. Karlsson et al., "Ti atoms in Ru0.3Ti0.7O2 mixed oxides form active and selective sites for electrochemical chlorine evolution," Electrochimica Acta, vol. 146, pp. 733-740, 2014.
[45]
S. Leijonmarck et al., "Flexible nano-paper-based positive electrodes for Li-ion batteries- Preparation process and properties," Nano Energy, vol. 2, no. 5, pp. 794-800, 2013.
[46]
S. Bebelis et al., "Highlights during the development of electrochemical engineering," Chemical engineering research & design, vol. 91, no. 10, pp. 1998-2020, 2013.
[47]
C. Hummelgård et al., "Physical and electrochemical properties of cobalt doped (Ti,Ru)O-2 electrode coatings," Materials Science & Engineering : B. Solid-state Materials for Advanced Technology, vol. 178, no. 20, pp. 1515-1522, 2013.
[48]
S. Leijonmarck et al., "Single-paper flexible Li-ion battery cells through a paper-making process based on nano-fibrillated cellulose," Journal of Materials Chemistry, vol. 1, no. 15, pp. 4671-4677, 2013.
[49]
C. Hummelgard et al., "Spin coated titanium-ruthenium oxide thin films," Thin Solid Films, vol. 536, pp. 74-80, 2013.
[50]
A. Alexiadis, A. Cornell and M. P. Dudukovic, "Comparison between CFD calculations of the flow in a rotating disk cell and the Cochran/Levich equations," Journal of Electroanalytical Chemistry, vol. 669, pp. 55-66, 2012.
[51]
S. Leijonmarck et al., "Electrolytically assisted debonding of adhesives : An experimental investigation," International Journal of Adhesion and Adhesives, vol. 32, pp. 39-45, 2012.
[52]
J. B. Parsa, M. Abbasi and A. Cornell, "Improvement of the Current Efficiency of the Ti/Sn-Sb-Ni Oxide Electrode via Carbon Nanotubes for Ozone Generation," Journal of the Electrochemical Society, vol. 159, no. 5, pp. D265-D269, 2012.
[53]
J. Gustavsson et al., "In-situ activated hydrogen evolution by molybdate addition to neutral and alkaline electrolytes," Journal of Electrochemical Science and Engineering, vol. 2, no. 3, pp. 105-120, 2012.
[54]
J. Gustavsson, G. Lindbergh and A. Cornell, "In-situ activation of hydrogen evolution in pH-neutral electrolytes by additions of multivalent cations," International journal of hydrogen energy, vol. 37, no. 12, pp. 9496-9503, 2012.
[55]
A. Alexiadis et al., "On the stability of the flow in multi-channel electrochemical systems," Journal of Applied Electrochemistry, vol. 42, no. 9, pp. 679-687, 2012.
[56]
J. Gustavsson et al., "On the suppression of cathodic hypochlorite reduction by electrolyte additions of molybdate and chromate ions," Journal of Electrochemical Science and Engineering, vol. 2, no. 4, pp. 155-169, 2012.
[57]
A. Alexiadis et al., "The flow pattern in single and multiple submerged channels with gas evolution at the electrodes," International Journal of Chemical Engineering, vol. 2012, pp. 392613, 2012.
[58]
A. Alexiadis et al., "Transition to pseudo-turbulence in a narrow gas-evolving channel," Theoretical and Computational Fluid Dynamics, vol. 26, no. 6, pp. 551-564, 2012.
[59]
S. Leijonmarck et al., "Electrochemical characterization of electrically induced adhesive debonding," Journal of the Electrochemical Society, vol. 158, no. 10, pp. P109-P114, 2011.
[60]
A. Alexiadis et al., "Liquid-gas flow patterns in a narrow electrochemical channel," Chemical Engineering Science, vol. 66, no. 10, pp. 2252-2260, 2011.
[61]
A. Alexiadis et al., "On the electrode boundary conditions in the simulation of two phase flow in electrochemical cells," International journal of hydrogen energy, vol. 36, no. 14, pp. 8557-8559, 2011.
[62]
C. Malmgren et al., "Nanocrystallinity in RuO2 coatings-Influence of precursor and preparation temperature," Thin Solid Films, vol. 518, no. 14, pp. 3615-3618, 2010.
[63]
J. Gustavsson, L. Nylen and A. Cornell, "Rare earth metal salts as potential alternatives to Cr(VI) in the chlorate process," Journal of Applied Electrochemistry, vol. 40, no. 8, pp. 1529-1536, 2010.
[64]
L. Nylén and A. M. Cornell, "Effects of electrolyte parameters on the iron/steel cathode potential in the chlorate process," Journal of Applied Electrochemistry, vol. 39, no. 1, pp. 71-81, 2009.
[65]
N. Ipek, M. Vynnycky and A. M. Cornell, "A coupled electrochemical and hydrodynamical two-phase model for the electrolytic pickling of steel," Journal of the Electrochemical Society, vol. 155, no. 4, pp. P33-P43, 2008.
[66]
L. Nylén, J. Gustavsson and A. M. Cornell, "Cathodic reactions on an iron RDE in the presence of Y(III)," Journal of the Electrochemical Society, vol. 155, no. 10, pp. E136-E142, 2008.
[67]
C. Malmgren et al., "Nanoscale characterization of crystallinity in DSA (R) coating," Journal of Physics, Conference Series, vol. 100, no. Part 5, pp. 052026, 2008.
[68]
N. Ipek, A. M. Cornell and M. Vynnycky, "A mathematical model for the electrochemical pickling of steel," Journal of the Electrochemical Society, vol. 154, no. 10, pp. P108-P119, 2007.
[69]
J. Wulff and A. M. Cornell, "Cathodic current efficiency in the chlorate process," Journal of Applied Electrochemistry, vol. 37, no. 1, pp. 181-186, 2007.
[70]
L. Nylén et al., "Investigation of the oxygen evolving electrode in pH-neutral electrolytes : Modelling and experiments of the RDE-cell," Electrochimica Acta, vol. 52, no. 13, pp. 4513-4524, 2007.
[71]
L. Nylén and A. M. Cornell, "Critical Anode Potential in the Chlorate Process," Journal of the Electrochemical Society, vol. 153, no. 1, pp. D14-D20, 2006.
[72]
A. Cornell, B. Håkansson and G. Lindbergh, "Ruthenium based DSA in chlorate electrolysis–critical anode potential and reaction kinetics," Electrochimica Acta, vol. 48, no. 5, pp. 473-481, 2003.
[73]
A. Cornell, B. Håkansson and G. Lindbergh, "Ruthenium-based dimensionally stable anode in chlorate electrolysis - Effects of electrolyte composition on the anode potential," Journal of the Electrochemical Society, vol. 150, no. 1, pp. D6-D12, 2003.
[74]
A. Cornell and D. Simonsson, "Ruthenium Dioxide as Cathode Material for Hydrogen Evolution in Hydroxide and Chlorate Solutions," Journal of The Electrochemical Society, vol. 140, no. 11, pp. 3123-3129, 1993.
[75]
A. Cornell, G. Lindbergh and D. Simonsson, "The effect of addition of chromate on the hydrogen evolution reaction and on iron oxidation in hydroxide and chlorate solutions," Electrochimica Acta, vol. 37, no. 10, pp. 1873-1881, 1992.
Conference papers
[76]
M. Agredano Torres et al., "Dynamic power allocation control for frequency regulation using hybrid electrolyzer systems," in 2023 IEEE Applied Power Electronics Conference And Exposition, APEC, 2023, pp. 2991-2998.
[77]
A. Cornell and F. Herlitz, "Ruthenium Based DSA® in Chlorate Electrolysis," in 4th KURT SCHWABE CORROSION SYMPOSIUM, Mechanisms of Corrosion and Corrosion Prevention Proceedings, 2004, pp. 326-332.
Chapters in books
[78]
A. Cornell, "Chlorate cathodes and electrode design," in Encyclopedia of applied electrochemistry, R.F. Savinell,K. Ota,G. Kreysa Ed., : Springer, 2014, pp. 175-181.
[79]
A. Cornell, "Chlorate synthesis cells and technology," in Encyclopedia of applied electrochemistry, R.F. Savinell, K. Ota, G. Kreysa Ed., : Springer, 2014, pp. 181-187.
[80]
A. Cornell, B. Håkansson and D. Simonsson, "Anodic Reactions in the Chlorate Process," in Energy and Electrochemical Processes for a Cleaner Environment : Proceedings of the International Symposium, C. Comninellis, M. Doyle and J. Winnick Ed., 1st ed. Pennington, New Jersey, USA : The Electrochemical Scoiety, Inc., 2001, pp. 117-128.
[81]
A. Cornell and D. Simonsson, "Ruthenium Dioxide as Cathode Material for Hydrogen Evolution in Hydroxide and Chlorate Solutions," in Chlor-Alkali and Chlorate Production/New Mathematical and Computational Methods in Electrochemical Engineering, T. Jeffrey, K. Ota, J. Fenton och H. Kawamoto Ed., Pennington, New Jersey, USA : The Electrochemical Society, 1993, p. 191.
Non-peer reviewed
Articles
[82]
A. M. Cornell, C. Weidlich and K. Bouzek, "Editorial : European symposium on electrochemical engineering," Electrochemical Science Advances, vol. 3, no. 2, 2023.
[83]
A. khataee et al., "Anion exchange membrane water electrolysis using Aemion™ membranes and nickel electrodes," Journal of Materials Chemistry A, vol. 10, no. 30, pp. 16061-16070, 2022.
Conference papers
[84]
A. Cornell, "Industrial Electrolysis : Electrochemical Synthesis of Organic and Inorganic Products and Intermediates," in 6th European Summer School on Electrochemical Engineering : Lectures and Book of Abstracts, 2012, pp. 225-256.
Chapters in books
[85]
A. Cornell, "Electrochemical Reactor Engineering," in Electrochemical Engineering: Industrial, Energy and Environmental Applications : Book of Lectures of the ESSEE5, Pablo Canizares Canizares Ed., 1st ed. Castilla La Mancha : Department of Chemical Engineering UCLM, 2009, pp. 159-188.
Theses
[86]
A. Cornell, "Electrode reactions in the chlorate process," Doctoral thesis Stockholm : KTH, Trita-KET, 163, 2002.
[87]
A. Cornell, "Activated Cathodes for the Hydrogen Evolution Reaction in Chlorate Manufacture," Licentiate thesis Stockholm : KTH, TRITA-TEK, 1993:01, 1993.
Other
[88]
R. K. B. Karlsson et al., "An improved force field for structures of mixed RuO2-TiO2 oxides," (Manuscript).
[89]
[90]
J. White et al., "Crystallographic facet and alkali metal cation dependent glycerol electrooxidation on polycrystalline Pd probed by SECCM," (Manuscript).
[91]
S. Sandin et al., "Deactivation and selectivity for the electrochemical ozone production at Ni- and Sb- doped SnO2 / Ti electrodes," (Manuscript).
[92]
H. Kim et al., "Feasibility of chemically modified cellulose nanofiber membrane as lithium ion battery separator," (Manuscript).
[93]
J. Gustavsson et al., "In-situ Activated Hydrogen Evolution by Molybdate Addition to Neutral and Alkaline Electrolytes," (Manuscript).
[94]
[95]
J. Gustavsson et al., "On the Suppression of Cathodic Hypochlorite Reduction by ElectrolyteAdditions of Molybdate and Chromate Ions," (Manuscript).
[96]
R. K. B. Karlsson and A. Cornell, "Selectivity between oxygen and chlorine evolution in the chlor-alkali and chlorate processes : a comprehensive review," (Manuscript).
[97]
N. Ipek, A. Cornell and M. Vynnycky, "Single- and two-phase modelling of the electrochemical pickling of steel," (Manuscript).
[98]
A. Lindberg et al., "Sources of oxygen produced in the chlorate process utilizing DSA electrodes doped by Sn and Sb," (Manuscript).
[99]
[100]
R. K. B. Karlsson, A. Cornell and L. G. M. Pettersson, "Structural changes in RuO2 during electrochemical hydrogen evolution," (Manuscript).
[101]
J. White et al., "Synergistic Bimetallic PdNi Nanoparticles : Enhancing Glycerol Electrooxidation while Preserving C3 Product Selectivity," (Manuscript).
Patents
Patents
[102]
A. Wide and P. Widmark, "Sätt vid kloratframställning : [Method of preparing chlorate]," se 466266C (1992-05-21), 1990.
Latest sync with DiVA:
2024-10-07 00:10:12