Publications by Christophe Duwig
Peer reviewed
Articles
[1]
D. Ansari and C. Duwig, "A gyroid TPMS heat sink for electronic cooling," Energy Conversion and Management, vol. 319, 2024.
[2]
R. Palulli et al., "A novel data-driven reduced order modelling methodology for simulation of humid blowout in wet combustion applications," Energy, vol. 297, 2024.
[3]
W. Raza et al., "A novel microchannel-twisted pinfin hybrid heat sink for hotspot mitigation," Applied Thermal Engineering, vol. 241, 2024.
[4]
A. Vdovin et al., "A test rig for the validation of CFD simulations of a passenger vehicle under hood environment," Case Studies in Thermal Engineering, vol. 59, 2024.
[5]
A. Behzadi et al., "Application to novel smart techniques for decarbonization of commercial building heating and cooling through optimal energy management," Applied Energy, vol. 376, 2024.
[6]
K. Zhang, R. Palulli and C. Duwig, "Numerical Investigation of the Reactive Impinging Jet Cooling – the role of vortices in heat and mass transfer intensification," International Journal of Heat and Mass Transfer, vol. 231, 2024.
[7]
B. Fiorina et al., "A joint numerical study of multi-regime turbulent combustion," APPLICATIONS IN ENERGY AND COMBUSTION SCIENCE, vol. 16, 2023.
[8]
Y. Shen et al., "Characterisation of distributed combustion of reformed methanol blends in a model gas turbine combustor," Energy, vol. 272, pp. 127149, 2023.
[9]
R. Palulli et al., "Characterisation of non-premixed, swirl-stabilised, wet hydrogen/air flame using large eddy simulation," Fuel, vol. 350, 2023.
[10]
K. Zhang et al., "Combustion characteristics of steam-diluted decomposed ammonia in multiple-nozzle direct injection burner," International journal of hydrogen energy, vol. 48, no. 42, pp. 16083-16099, 2023.
[11]
A. Zhao et al., "Parameter study for oil spray cooling on endwindings of electric machines via Eulerian–Lagrangian simulation," Applied Thermal Engineering, vol. 235, 2023.
[12]
K. Zhang et al., "Reactive cooling simulation of electronic components," Applied Thermal Engineering, vol. 228, 2023.
[13]
M. Rovira Sacie, K. Engvall and C. Duwig, "Sensitivity analysis of an ammonium salt formation model applied to pollutant removal in marine diesel exhaust gases," Fuel, vol. 332, 2023.
[14]
A. Behzadi et al., "Supply-demand side management of a building energy system driven by solar and biomass in Stockholm : A smart integration with minimal cost and emission," Energy Conversion and Management, vol. 292, 2023.
[15]
I. Soyler et al., "Uncertainty quantification of the premixed combustion characteristics of NH3/H2/N2 fuel blends," International journal of hydrogen energy, vol. 48, no. 38, pp. 14477-14491, 2023.
[16]
Y. Shen et al., "Waste heat recovery optimization in ammonia-based gas turbine applications," Energy, vol. 280, 2023.
[17]
N. Scapin et al., "Finite-size evaporating droplets in weakly compressible homogeneous shear turbulence," Journal of Fluid Mechanics, vol. 934, 2022.
[18]
B. Nourozi et al., "Heating energy implications of utilizing gas-phase air cleaners in buildings? : centralized air handling units," Results in Engineering (RINENG), vol. 16, 2022.
[19]
K. Zhang, Y. Shen and C. Duwig, "Identification of heat transfer intensification mechanism by reversible N2O4 decomposition using direct numerical simulation," International Journal of Heat and Mass Transfer, vol. 182, 2022.
[20]
M. Rovira, K. Engvall and C. Duwig, "Identifying key features in reactive flows : A tutorial on combining dimensionality reduction, unsupervised clustering, and feature correlation," Chemical Engineering Journal, vol. 438, 2022.
[21]
Y. Shen, K. Zhang and C. Duwig, "Investigation of wet ammonia combustion characteristics using LES with finite-rate chemistry," Fuel, vol. 311, 2022.
[22]
M. Atzori et al., "LES and RANS calculations of particle dispersion behind a wall-mounted cubic obstacle," International Journal of Multiphase Flow, vol. 151, pp. 104037, 2022.
[23]
R. Attarzadeh, S.-H. Attarzadeh-Niaki and C. Duwig, "Multi-objective optimization of TPMS-based heat exchangers for low-temperature waste heat recovery," Applied Thermal Engineering, vol. 212, pp. 118448, 2022.
[24]
A. Behzadi et al., "Smart design and control of thermal energy storage in low-temperature heating and high-temperature cooling systems : A comprehensive review," Renewable & sustainable energy reviews, vol. 166, pp. 112625, 2022.
[25]
R. Attarzadeh, M. Rovira and C. Duwig, "Design analysis of the "Schwartz D" based heat exchanger : A numerical study," International Journal of Heat and Mass Transfer, vol. 177, 2021.
[26]
S. Dybe et al., "Design and Experimental Characterization of a Swirl-Stabilized Combustor for Low Calorific Value Gaseous Fuels," Journal of engineering for gas turbines and power, vol. 144, no. 2, 2021.
[27]
M. Rovira, K. Engvall and C. Duwig, "Detailed numerical simulations of low-temperature oxidation of NOx by ozone," Fuel, vol. 303, 2021.
[28]
K. Zhang et al., "Experimental and Numerical Investigation of Ultra-Wet Methane Combustion Technique for Power Generation," Journal of engineering for gas turbines and power, vol. 143, no. 5, 2021.
[29]
K. Zhang, Y. Shen and C. Duwig, "Finite rate simulations and analyses of wet/distributed flame structure in swirl-stabilized combustion," Fuel, vol. 289, 2021.
[30]
K. Rönnberg and C. Duwig, "Heat transfer and associated coherent structures of a single impinging jet from a round nozzle," International Journal of Heat and Mass Transfer, vol. 173, 2021.
[31]
K. Zhang, Y. Shen and C. Duwig, "Identification of coherent structures in distributed swirl-stabilized wet combustion," Fuel, vol. 296, 2021.
[32]
K. Zhang, G. Lupo and C. Duwig, "Investigation of wet combustion instability due to bio-syngas fuel variability," Fuel, vol. 285, 2021.
[33]
T. Olenius et al., "Modeling of exhaust gas cleaning by acid pollutant conversion to aerosol particles," Fuel, vol. 290, 2021.
[34]
P. Sadeghian et al., "Numerical investigation of the impact of warming blankets on the performance of ventilation systems in the operating room," Advances in Building Energy Research, pp. 1-23, 2021.
[35]
M. Rovira, K. Engvall and C. Duwig, "Proper orthogonal decomposition analysis of the large-scale dynamics of a round turbulent jet in counterflow," Physical Review Fluids, vol. 6, no. 1, 2021.
[36]
B. M. Ningegowda et al., "A mass-preserving interface-correction level set/ghost fluid method for modeling of three-dimensional boiling flows," International Journal of Heat and Mass Transfer, vol. 162, 2020.
[37]
G. Lupo et al., "Direct numerical simulation of spray droplet evaporation in hot turbulent channel flow," International Journal of Heat and Mass Transfer, vol. 160, 2020.
[38]
P. Sadeghian et al., "Impact of surgical lamp design on the risk of surgical site infections in operating rooms with mixing and unidirectional airflow ventilation : A numerical study," Journal of Building Engineering, vol. 31, 2020.
[39]
M. Rovira, K. Engvall and C. Duwig, "Review and numerical investigation of the mean flow features of a round turbulent jet in counterflow," Physics of fluids, vol. 32, no. 4, 2020.
[40]
G. Lupo and C. Duwig, "Uncertainty quantification of multispecies droplet evaporation models," International Journal of Heat and Mass Transfer, vol. 154, 2020.
[41]
Y. Shen et al., "Vortex breakdown of the swirling flow in a Lean Direct Injection burner," Physics of fluids, vol. 32, no. 12, 2020.
[42]
G. Lupo et al., "An Immersed Boundary Method for flows with evaporating droplets," International Journal of Heat and Mass Transfer, vol. 143, 2019.
[43]
E. Fooladgar, P. Tóth and C. Duwig, "Characterization of flameless combustion in a model gas turbine combustor using a novel post-processing tool," Combustion and Flame, pp. 356-367, 2019.
[44]
E. Hodzic et al., "Large Eddy Simulation of Bluff-Body Flame Approaching Blow-Off : A Sensitivity Study," Combustion Science and Technology, vol. 191, no. 10, pp. 1815-1842, 2019.
[45]
G. Lupo and C. Duwig, "A Numerical Study of Ethanol-Water Droplet Evaporation," Journal of engineering for gas turbines and power, vol. 140, no. 2, 2018.
[46]
E. Fooladgar and C. Duwig, "A new post-processing technique for analyzing high-dimensional combustion data," Combustion and Flame, vol. 191, pp. 226-238, 2018.
[47]
L. Cifuentes, E. Fooladgar and C. Duwig, "Chemical Explosive Mode Analysis for a Jet-in-Hot-Coflow burner operating in MILD combustion," Fuel, vol. 232, pp. 712-723, 2018.
[48]
E. Hodzic et al., "A Large Eddy Simulation Study of Bluff Body Flame Dynamics Approaching Blow-Off," Combustion Science and Technology, vol. 189, no. 7, pp. 1107-1137, 2017.
[49]
B. Fiorina et al., "Challenging modeling strategies for LES of non-adiabatic turbulent stratified combustion," Combustion and Flame, 2015.
Conference papers
[50]
M. M. Ghulam et al., "Characterization of Non-reacting Swirling Flow in a Gas Turbine Fuel Injector," in AIAA Scitech 2021 Forum, 2021, pp. 1-22.
[51]
P. Sadeghian et al., "Visualizing bacteria-carrying particles in the operating room : exposing invisible risks," in Healthy Buildings 2021 – Europe : Proceedings of the 17th International Healthy Buildings Conference 21–23 June 2021, 2021.
[52]
Y. Shen, N. Jaouen and C. Duwig, "Characterization of Dynamics in a Premixed Flame," in ERCOFTAC Workshop Direct and Large Eddy Simulation, 2020, pp. 191-197.
[53]
S. Dybe et al., "Design and experimental characterization of a swirl-stabilized combustor for low calorific value gaseous fuels," in Proceedings of the ASME Turbo Expo, 2020.
[54]
K. Zhang et al., "Experimental and numerical investigation of ultra-wet methane combustion technique for power generation," in Proceedings of the ASME Turbo Expo, 2020.
[55]
M. Rovira, K. Engvall and C. Duwig, "Large Eddy Simulation of Precession of a Non-swirling Turbulent Jet in a Counterflow," in ERCOFTAC Series, 2020, pp. 77-83.
[56]
K. Rönnberg and C. Duwig, "Large Eddy Simulation of Circular Impinging Jet for Heat Transfer Applications," in Proceedings XII ERCOFTAC Workshop Direct and Large Eddy Simulation, 2019, pp. 69-75.
[57]
G. Lupo and C. Duwig, "A numerical study of ethanol-water droplet evaporation," in Proceedings of the ASME Turbo Expo, 2017.
[58]
C. Duwig et al., "Numerical Study of Thermo-acoustic Waves Generation by a Swirling Flame Using a New Approach Based on large eddy simulation," in Volume 2: Turbo Expo 2005 : Power for Land, Sea, and Air (GT2005), 2005, pp. 67-75.
Chapters in books
[59]
E. Fooladgar and C. Duwig, "Identification of combustion trajectories using t-distributed stochastic neighbor embedding (t-SNE)," in Direct and Large-Eddy Simulation XI, : Springer, 2019, pp. 245-251.
Non-peer reviewed
Theses
[60]
C. Duwig, "Numerical and experimental validation of gas turbine combustor design for gasified biomass combustion," Licentiate thesis Stockholm : Energiteknik, TRITA-KRV, 2000-5, 2000.
Other
[61]
M. Rovira, K. Engvall and C. Duwig, "Combining ozone and UV-light for energy efficient removal of SOx in low-temperature flue gas," (Manuscript).
[62]
[63]
Y. Shen et al., "Characterization of distributed combustion of reformed methanolblends in a model gas turbine combustor," (Manuscript).
[64]
G. Lupo et al., "Direct numerical simulation of spray evaporation in hot turbulent channel flow," (Manuscript).
[65]
K. Rönnberg and C. Duwig, "Heat transfer and associated coherent structures of a single impinging jet from around nozzle," (Manuscript).
[66]
G. Lupo et al., "Immersed boundary method for direct numerical simulation of multicomponent droplet evaporation," (Manuscript).
[67]
[68]
Y. Shen et al., "Motion of the heat release fluctuations in a turbulentpremixed swirling flame," (Manuscript).
[69]
M. Rovira, K. Engvall and C. Duwig, "Sensitivity analysis of an ammonium salt formation model applied to pollutant removal in marine diesel exhaust gases," (Manuscript).
[70]
G. Lupo and C. Duwig, "Uncertainty quantification of multispecies droplet evaporation models," (Manuscript).
[71]
Y. Shen, S. M. Nazir and C. Duwig, "Waste heat recovery optimization in micro gas turbineapplications using thermal reforming and humidified gasturbine cycle concepts," (Manuscript).
Latest sync with DiVA:
2024-09-15 02:16:35