Publication list

Publication list – Jinshan Pan (2022-05)

Peer reviewed scientific journals:

1.     M. Liu, Y. Jin, J. Pan, “Relevance of implicit and explicit solvent in density-functional theory study of adsorption at electrochemical NaCl/Al interface”, Mater. Today Commu., 31 (2022) 103425.

2.     Y. Li, Z. Kang, X. Zhang, J. Pan, Y. Ren, G. Zhou, “Fabricating an anti-corrosion carbonate coating on Mg-Li alloy by low-temperature plasma”, Surf. & Coat. Tech., 439 (2022) 128418.

3.     X. Yue, Z. Yang, L. Huang, L. Zhang, J. Li, Z. Xue, J. Pan, “Passivation characteristics of ultra-thin 316L foil in NaCl solutions”, J. Mater. Sci. & Tech., 127 (2022) 192.

4.     J. Pan, C. Örnek, U. Lienert, M. Liu, T. Müller, F. Zhang, V. Ratia-Hanby, L. Carpén, E. Isotahdon, “Reply to Comment on “Corrosion-induced microstructure degradation of copper in sulfide-containing simulated anoxic groundwater studied by synchrotron high-energy X-ray diffraction and ab-initio density functional theory calculation””, Corro. Sci., 199 (2022) 110183.

5.     Y. Cao, D. Zheng, F. Zhang, J. Pan, C. Lin, “Layered double hydroxide (LDH) for multi-functionalized corrosion protection of metals: A review”, J. Mater. Sci. & Techno., 102 (2022) 232.

6.     C. Örnek, T. Müller, B.M. Şeşen, U. Kivisäkk, F. Zhang, M. Långberg, U. Lienert, A. Jeromin, T.F. Keller, E. Lundgren, and J. Pan, “Hydrogen-induced micro-strain evolution in super suplex stainless steel—correlative high-energy X-Ray diffraction, electron backscattered diffraction, and digital image correlation, Front. Mater., 8 (2022) 793120.

7.     A. Larsson, G. D’Acunto, M. Vorobyova, G. Abbondanza, U. Lienert, Z. Hegedüs, A. Preobrajenski, L.R. Merte, J. Eidhagen, A. Delblanc, J. Pan, and Edvin Lundgren, “Thickness and composition of native oxides and near-surface regions of Ni superalloys” J. Alloys & Compounds, 895 (2022) 162657.

8.     J. Zhao, D. Wang, F. Zhang, Y. Liu, B. Chen, Z.L. Wang, J. Pan, R. Larsson, Y. Shi, “Real-time and online lubricating oil condition monitoring enabled by triboelectric nanogenerator”, ACS Nano, 15 (2021) 11869.

9.     M. Liu, Y. Jin, B. Chen, C. Leygraf, L. Wang, J. Pan, “Density functional theory study of influence of oxide thickness and surface alloying on Cl migration within α-Al2O3”, J. Electrochem. Soc., 168 (2021) 081508.

10.  F. Zhang, C. Örnek, M. Liu, T. Müller, U. Lienert, V. Ratia-Hanby, L. Carpén, E. Isotahdon, J. Pan, “Corrosion-induced microstructure degradation of copper in sulfide-containing simulated anoxic groundwater studied by synchrotron high-energy X-ray diffraction and ab-initio density functional theory calculation”, Corros. Sci.,184 (2021) 109390.

11.  Y.H. Liew, C. Örnek, J. Pan, D. Thierry, S. Wijesinghe, D.J. Blackwood, “Towards understanding micro-galvanic activities in localised corrosion of AA2099 aluminium alloy”, Electrochimica Acta, 392 (2021) 139005.

12.  Y. Ni, F. Zhang, D.I. Njoku, Y. Yu, J. Pan, M. Meng, Y. Li, “Corrosion mechanism of CuAl-NiC abradable seal coating system—The influence of porosity, multiphase, and multilayer structure on the corrosion failure”, J. Mater. Sci. & Tech., 88, 258 (2021).

13.  Z. Bian, L. Zhang, S. Wu, F. He, F. Zhang, J. Pan, G. Xie, “Temperature effect on mechanical strength and frictional properties of polytetrafluoroethylene‐based core‐shell nanocomposites”, J. Appl. Polymer, 138, 49929 (2021).

14.  J. Cheng, N. Mei, S. Chen, P. Bai, B. Shen, J. Pan, F. Zhang, “Interactions in composite film formation of Mefp-1/graphene on carbon steel”, Coatings, 11 (2021) 1161.

15.  C. Örnek, A. Larsson, G. Harlow, F. Zhang, R. Kroll, F. Carlà, H. Hussain, U. Kivisäkk, D.L Engelberg, E. Lundgren, J. Pan, “Metastable precursor structures in hydrogen-infused super duplex stainless steel microstructure – An operando diffraction experiment”, Corro. Sci.,176, 109021 (2020).

16.  Y-H. Liew, C. Örnek, J. Pan, D. Thierry, S. Wijesinghe, D. J. Blackwood, “In-situ time-lapse SKPFM investigation of sensitized AA5083 aluminum alloy to understand localized corrosion”, J. Electrochem. Soc., 167, 141502 (2020).

17. C. Örnek, T. Müller, U. Kivisäkk, F. Zhang, M. Långberg, U. Lienert, K.-H. Hwang, E. Lundgren, J. Pan, “Operando time- and space-resolved high-energy X-ray diffraction measurement to understand hydrogen-microstructure interactions in duplex stainless steel”, Corro. Sci., 175, 108899 (2020).

18. M. Långberg, F. Zhang, E. Grånäs, C. Örnek, J. Cheng, M. Liu, C. Wiemann, A. Gloskovskii, T. Keller, C. Schlueter, S. Kulkarni, H. Noei, D. Lindell, U. Kivisäkk, E. Lundgren, A. Stierle, J. Pan, “Lateral variation of the native passive film on super duplex stainless steel resolved by synchrotron hard X-ray photoelectron emission microscopy”, Corro. Sci., 174, 108841 (2020).

19. J. Pan, “Studying the passivity and breakdown of duplex stainless steels at micrometer and nanometer scales - the influence of microstructure”, Front. Mater., 7: 133 (2020).

20. C. Örnek, A. Larsson, G. Harlow, F. Zhang, R. Kroll, F. Carlà, H. Hussain, U. Kivisäkk, D.L Engelberg, E. Lundgren, J. Pan, “Time-resolved GIXRD Measurement to Understand the Effect of Hydrogen on Surface Strain Development in Super Duplex Stainless Steel”, Scripta Materialia, 187, 63 (2020).

21. C. Örnek, C. Leygraf, J. Pan, “Real-time corrosion monitoring of aluminum alloy using scanning Kelvin probe force microscopy”, J. Electrochem. Soc., 167, 081502 (2020).

22. J. Cheng, S. Chen, F. Zhang, B. Shen, X. Liu, J. Pan, “Corrosion- and wear-resistant composite film of graphene and mussel adhesive proteins on carbon steel”, Corro. Soc., 164 (2020) 108351.

23. F. Zhang, C. Örnek, J.O. Nilsson, J. Pan, “Anodisation of aluminium alloy AA7075 – Influence of intermetallic particles on anodic oxide growth”, Corro. Soc., 164 (2020) 108319.

24. R. Hou, F. Zhang, P. Jiang, S. Dong, J. Pan, C. Lin, “Corrosion inhibition of pre-formed mussel adhesive protein (Mefp-1) film to magnesium alloy”, Corro. Soc., 164 (2020) 108309.

25. Y. He, Y. Boluk, J. Pan, A. Ahniyaz, T. Deltin, P.M. Claesson, “Comparative study of CNC and CNF as additives in waterborne acrylate-based anti-corrosion coatings”, J. Dispersion Sci. Techno. 41 (2020) 2037.

26. F. Zhang, J. Pan, “Recent development of corrosion protection strategy based on mussel adhesive protein – Mini review”, Front. Mater. 6 (2019) 207.

27. L. Yin, W. Li, Y. Wang, Y. Jin, J. Pan, C. Leygraf, “Numerical simulation of micro-galvanic corrosion of Al alloys: effect of density of Al(OH)3, precipitate”, Electrochim. Acta, 324 (2019) 134847.

28. Y. Cao, D. Zheng, J. Luo, F. Zhang, S. Dong, J. Pan, C. Lin, “Insight into the fabrication of ZnAl layered double hydroxides intercalated with organic anions and their corrosion protection of steel reinforced concrete”, J. Electrochem. Soc., 166, C617-C623 (2019).

29. S. Chen, B. Shen, F. Zhang, H. Hong, J. Pan, “Mussel-inspired graphene film with enhanced durability as a macroscale solid lubricant”, ACS Applied Materials and Interfaces, 11, 31386-31392 (2019).

30. M. Liu, Y. Jin, J. Pan, C. Leygraf, “Co-adsorption of H2O, OH, and Cl on Aluminum and intermetallic surfaces and its effects on the work function studied by DFT calculations”, Molecules, 24 (2019) 4284.

31. M. Långberg, C. Örnek, F. Zhang, J. Cheng, M. Liu, E. Grånäs, C.Wiemann, A. Gloskovskii, Y. Matveyev, S. Kulkarni, H. Noei, T. F. Keller, D. Lindell, U. Kivisäkk, E. Lundgren, A. Stierle, and J. Pan, “Characterization of native oxide and passive film on austenite/ferrite phases of duplex stainless steel using synchrotron HAXPEEM”, J. Electrochem. Soc., 166, C3336-C3130 (2019).

32. M. Långberg, C. Örnek, J. Evertsson, G.S. Harlow, W. Linpé, L. Rullik, F. Carlà, R. Felici, E. Bettini, U. Kivisäkk, E. Lundgren, J. Pan, “Redefining passivity breakdown of super duplex stainless steel by electrochemical operando synchrotron near surface X-ray analyses”, npj Mater. Degradation, 3, 22 (2019).

33.  Y. He, Y. Boluk, J. Pan, A. Ahniyaz, T. Deltin, P.M. Claesson, “Corrosion protective properties of cellulose nanocrystals reinforced waterborne acrylate-based composite coating”, Corro. Soc., 155, 186-194 (2019).

34. M. Liu, Y. Jin, C. Leygraf, J. Pan, “A DFT-study of Cl ingress into α-Al2O3(0001) and Al(111) and its possible influence on localized corrosion of Al”, J. Electrochem. Soc., 166, C3124-C3130 (2019).

35. J. Li, L. Ecco, A. Ahniyaz, J. Pan, “Probing electrochemical mechanism of polyaniline and CeO2 nanoparticles in alkyd coating with in-situ electrochemical-AFM and IRAS”, Progress of Organic Coatings, 132, 399-408 (2019).

36. F. Zhang, C. Chen, R. Hou, J. Li, Y. Cao, S. Dong, C. Lin, J. Pan, "Investigation and Application of Mussel Adhesive Protein Nanocomposite Film-Forming Inhibitor for Reinforced Concrete Engineering”, Corro. Soc., 153, 333-340 (2019).

37.   C. Örnek, M. Långberg, J. Evertsson, G. Harlow, W. Linpé, L. Rullik, F. Carlà, R. Felici, U. Kivisäkk, E. Lundgren, J. Pan, “Influence of surface strain on passive film formation of duplex stainless steel and its degradation in corrosive environment”, J. Electrochem. Soc., 166, C3071-C3080 (2019).

38.   C. Örnek, C. Leygraf, J. Pan, “Passive film characterization of duplex stainless steel using scanning Kelvin prove force microscopy in combination with electrochemical measurements”, npj Mater. Degradation, 3:8 (2019).

39.   C, Örnek, C. Leygraf, J. Pan, “On the Volta potential measured by SKPFM – fundamental and practical aspects with relevance to corrosion science”, Corro. Engin., Sci. Techno., 54, 185-198 (2019).   

40.   K. Anantha, C. Örnek, S. Ejnermark, A. Thuvander, A. Medvedeva, J. Sjöström, J. Pan, “Experimental and modeling study of the effect of tempering on the susceptibility to environment-assisted cracking of AISI 420 martensitic stainless steel”, Corro. Sci., 148, 83-93 (2019).

41.   D. S. Kharitonov, J. Sommertune, C. Örnek, J. Ryl, I. I. Kurilo, P. M. Claesson, J. Pan, “Corrosion Inhibition of Aluminum Alloy AA6063-T5 by Vanadates: Local surface chemical events elucidated by confocal Raman micro-spectroscopy”, Corro. Soc., 148, 237-250 (2019).

42.   L. Yin, J. Pan, C. Leygraf, Y. Jin, “Experimental and simulation investigations of copper reduction mechanism with and without addition of SPS”, J. Electrochem. Soc., 165, D604-D611 (2018).

43.   C. Örnek, M. Långberg, J. Evertsson, G. Harlow, W. Linpé, L. Rullik, F. Carlà, R. Felici, E. Bettini, U. Kivisäkk, E. Lundgren, J. Pan, “In-situ synchrotron GIXRD study of passive film evolution on duplex stainless steel in corrosive environment”, Corros. Sci., 141, 18-21 (2018).

44.   C. Örnek, P. Reccagni, U. Kivisääk, E. Bettini, D. Engelberg, J. Pan, “Hydrogen embrittlement of super duplex stainless steel – towards understanding the effect of microstructure and strain”, Inter. J. Hydrogen Energy, 43, 12543-12555 (2018).

45.   C. Örnek, M. Liu, J. Pan, Y. Jin, C. Leygraf, “Volta potential evolution of intermetallics in aluminium alloy microstructure under thin aqueous adlayers: a combined DFT and Experimental study”, Topics in Catalysis, 61, 1169-1182 (2018).

46.   J. Chen, J. Pan, T. Wang, X. Liu, “Micro-galvanic corrosion of Cu/Ru couple in potassium periodate (KIO4), Corros. Sci., 137, 184-193 (2018).

47.   Y. He, I. Dobryden, J. Pan, A. Ahniyaz, T. Deltin, R.W. Corkery, P.M. Claesson, “Nano-scale mechanical and wear properties of a waterborne hydroxyacrylicmelamine anti-corrosion coating”, Appl. Surf. Sci., 457, 548-558 (2018).

48.   D. S. Kharitonov, C. Örnek, P. M. Claesson, J. Sommertune, I. M. Zharskii, I. I. Kurilo, Jinshan Pan, “Corrosion inhibition of aluminum alloy AA6063-T5 by vanadates: microstructure characterization and corrosion analysis”, J. Electrochem. Soc., 165, C116-C126 (2018).

49.   Y. Jin, Z. Lai, P. Bi, S. Yan, L. Wen, Y. Wang, J. Pan, C. Leygraf, “Combining lithography and capillary techniques for local electrochemical property measurements”, Electrochemistry Communications, 87, 53-57 (2018).

50.   Y. Wang, L. Yin, Y. Jin, J. Pan, C. Leygraf, “Numerical simulation of micro-galvanic corrosion in Al alloys: steric hindrance effect of corrosion product”, J. Electrochem. Soc., 164, C1035-C1043 (2017).

51.   K. Anantha, Cem Örnek, S. Ejnermark, A. Medvedeva, J. Sjöström, J. Pan, “In situ AFM study of localized corrosion processes of tempered AISI 420 martensitic stainless steel: effect of secondary hardening”, J. Electrochem. Soc., 164, C810-C818 (2017).

52.   F. Zhang, J. Evertsson, F. Bertram, L. Rullik, F. Carla, M. Långberg, E. Lundgren, J. Pan, “Integration of electrochemical and synchrotron-based X-ray techniques for in-situ investigation of aluminum anodization”, Electrochimica Acta, 241, 299-308 (2017).

53.   L. Yin, Y. Jin, C. Leygraf, J. Pan, “Numerical simulation of micro-galvanic corrosion of Al alloys: effect of chemical factors", J. Electrochem. Soc., 164, C768-C778 (2017).

54.   Y. Jin, M. Liu, C. Zhang, C. Leygraf, L. Wen, J. Pan, “First-principle calculation of Volta potential of intermetallic particles in aluminum alloys and practical implications”, J. Electrochem. Soc., 164, C465-C473 (2017).

55.   H. Huang, I. Dobryden, N. Ihrner, M. Johansson, H. Ma, J. Pan, P. M. Claesson, Temperature-dependent surface nanomechanical properties of a thermoplastic nanocomposite, J. Collo. & Interf. Sci., 494, 204-214 (2017).

56.   F. Zhang, G. Xie, J. Pan, “Tunable adsorption and film formation of mussel adhesive protein by potential control”, Langmuir, 33, 8749-8756 (2017).

57.   C. Chen, R. Hou, F. Zhang, S. Dong, P. M. Claesson, C. Lin, J. Pan, Heating-induced enhancement of corrosion protection of carbon steel by a nanocomposite film containing mussel adhesive protein, J. Electrochem. Soc., 164, C188-C193 (2017).

58.   K. Anantha, Cem Örnek, S. Ejnermark, A. Medvedeva, J. Sjöström, J. Pan, Correlative microstructure analysis and in situ corrosion study of AISI 420 martensitic stainless steel for plastic molding applications, J. Electrochem. Soc., 164, C85-C93 (2017).

59.   L. Yin, Y. Jin, C. Leygraf, Nick Birbilis, J. Pan, “Numerical simulation of micro-galvanic corrosion in Al alloys: effect of geometric factors", J. Electrochem. Soc., 164, C75-C84 (2017).

60.   S. Hosseinpour, M. Forslund, C.M. Johnson, J. Pan, C. Leygraf, “Atmospheric corrosion of Cu, Zn, and Cu-Zn alloys protected by self-assembled monolayers of alkanethiols”, Surf. Sci., 648, 170-176 (2016).

61.   P. Jian, R. Hou, C. Chen, L. Sun, S. Dong, J. Pan, C. Lin, “Controllable degradation of medical magnesium by electrodeposited composite films of mussel adhesive protein (Mefp-1) and chitosan”, J. Collo. & Interf. Sci., 478, 246-255 (2016).

62.   S. Ferraris, A. Vitale, E. Bertone, S. Guastella, C. Cassinelli, J. Pan, S. Spriano, “Multifunctional commercially pure titanium for the improvement of bone integration: multiscale topography, wettability, corrosion resistance and biological functionalization”, Mater. Sci. & Eng.: C, 60, 384-393 (2016). 

63.   J. Cheng, T. Wang, J. Pan, X. Lu, “Corrosion investigations of ruthenium in potassium periodate solutions relevant for chemical mechanical polishing”, J. Electronic Materials, 5, 1-9 (2016).

64.   L. Yin, Y. Jin, C. Leygraf, J. Pan, “A FEM model for investigation of micro-galvanic corrosion of Al alloys and effects of deposition of corrosion products”, Electrochimica Acta, 192, 310-318 (2016).

65.   S. Jafarzadeh, P.M. Claesson, P.E. Sundell, E. Tyrode, J. Pan, “Active corrosion protection by conductive composites of polyaniline in a UV-cured polyester acrylate coating”, Prog. Org. Coat., 90, 154-162 (2016).

66.   F. Zhang, J.O. Nilsson, J. Pan, “In-situ and operando AFM and EIS studies of anodization of Al6060: influence of intermetallic particles”, J. Electrochem. Soc., 163, C609-C618 (2016).    

67.   C. Chen, F. Zhang, C. Lin, J. Pan, “Corrosion protection and self-healing of a nanocomposite film of mussel adhesive protein and CeO2 nanoparticles on carbon steel”, J. Electrochem. Soc., 163, C545-C552 (2016).    

68.   J. Li, H. Huang, M. Fielden, J. Pan, L. Ecco, C. Schellbach, G. Delmas, P. M. Claesson, “Towards the mechanism of electrochemical activity and self-healing of 1 wt% PTSA doped polyaniline in alkyd composite polymer coating: combined AFM-based studies”, RSC Advances, 6 (23), 19111-19127 (2016).

69.   L. Ejenstam, M. Tuominen, J. Haapanen, J. M. Mäkelä, J. Pan, A. Swerin, P. M. Claesson, “Long-term corrosion protection by a thin nano-composite coating”, Appl. Surf. Sci., 357, 2333-2342 (2015).

70.   J. Li, L. Ecco, A. Ahniyaz, M. Fedel, J. Pan, “In-situ AFM and electrochemical study of a waterborne acrylic composite coating with CeO2 nanoparticles for corrosion protection of carbon steel”, J. Electrochem. Soc., 162, C610-C618 (2015).    

71.   L. Ejenstam, A. Swerin, J. Pan, P. M. Claesson, “Corrosion protection by hydrophobic silica particle-polydimethylsiloxane composite coatings”, Corro. Sci., 99, 89-97 (2015).  

72.   M. Forslund, J. Pan, S. Hosseinpour, F. Zhang, M. Johnson, P. M. Claesson, C. Leygraf, “Corrosion inhibition of two brass alloys by octadecanethiol in humidified air with formic acid” Corrosion, 71, 908-917 (2015).

73.   J. Evertsson, F. Bertram, F. Zhang, L. Rullik, L.R. Merte, M. Shipilin, M. Soldemo, S. Ahmadi, N. Vinogradov, F. Carlà, J. Weissenrieder, M. Göthelid, J. Pan,
A. Mikkelsen, J.-O. Nilsson, E. Lundgren, “The thickness of native oxides on aluminium alloys and single crystalls”, App. Surf. Sci., 349, 826-832 (2015).

74.   J. Li, L. Ecco, M. Fedel, V. Ermini, G. Delmas, J. Pan, “In-situ AFM and EIS study of a solventborne alkyd coating with nanoclay for corrosion protection of carbon steel”, Prog. Org. Coat., 87, 179-188 (2015).

75.   J. Li, L. Ecco, G. Delmas, N. Whitehouse, P. Collins, F. Deflorian, J. Pan, “In-situ AFM and EIS Study of waterborne acrylic latex coatings for Corrosion Protection of Carbon Steel”, J. Electrochem. Soc., 162, C55-C63 (2015).   

76.   R. Álvarez-Asencio, M. Sababi, J. Pan, S. Ejnermark, L. Ekman, M. W. Rutland, “Role of microstructure on corrosion initiation of an experimental tool alloy: a quantitative nanomechanical property mapping study”, Corros. Sci., 89, 236-241 (2014).

77.   S. Jafarzadeh, P.M. Claesson, P.-E. Sundell, J. Pan, E. Thormann, “Nanoscale electrical and mechanical characteristics of conductive polyaniline network in polymer composite films”, ACS Appl. Mater. & Interf., 6, 19168-19175 (2014).  

78.   F. Bertram, F. Zhang, J. Evertsson, F. Carl, J. Pan, M. Messing, A. Mikkelsen, J.-O. Nilsson, E. Lundgren, “In situ anodization of aluminum surfaces studied by x-ray reflectivity and electrochemical impedance spectroscopy”, J. Applied Physics, 116, 034902 (2014).

79.   S. Jafarzadeh, P.M. Claesson, J. Pan, E. Thormann, “Direct measurement of colloidal interactions between hydrophilic and hydrophobic polyaniline particles in a UV-curable coating formulation”, Langmuir, 30, 1045-1054 (2014).

80.   G. Xie, M. Forslund, J. Pan, “Direct electrochemical synthesis of reduced graphene oxide (rGO)/copper composite films and their electrical/electroactive properties”, ACS Applied Mater. & Interf., 6, 7444–7455 (2014).

81.   M. Forslund, C. Leygraf, P. M. Claesson, J. Pan, “Octadecanethiol as corrosion inhibitor for zinc and patterned zinc-copper in humidified air with formic acid” J. Electrochem. Soc., 161, C1-C9 (2014).

82.   M. Sababi, J. Pan, P.-E. Augustsson, P.-E. Sundell, P. M. Claesson, “Influence of conducting polymer and ceria nanoparticle additives on corrosion protection of a UV-cure coating on carbon steel”, Corros. Sci., 84, 189-197 (2014). 

83.   E. Bettini, U. Kivisäkk, C. Leygraf, J. Pan, “Study of corrosion behavior of a 2507 super duplex stainless steel: influence of quenched-in and isothermal chromium nitrides”, Intern. J. Electrochem.Soc., 9, 61-80 (2014).

84.   G. Pan, C. Balagna, L. Martino, J. Pan, S. Spriano, “Microstructure and transformation temperatures in rapid solidified Ni-Ti alloys. Part II: The effect of copper addition”, J. Alloys & Compounds, 589, 633-642 (2014).  

85.   L.G. Ecco, J. Li, M. Fedel, F. Deflorian, J. Pan, “EIS and in situ AFM study of barrier property and stability of waterborne and solventborne clear coats”, Prog. Org. Coat., 77, 600-608 (2014).

86.   L. Ejenstam, L. Ovaskainen; I. Rodriguez-Meizoso; L. Wågberg; J. Pan; A. Swerin; P.M Claesson, “The effect of superhydrophobic wetting state on corrosion protection - the AKD example”, J. Collo. and Interf. Sci., 412, 56-64 (2013).

87.   E. Bettini, U. Kivisäkk, C. Leygraf, J. Pan, “Study of corrosion behavior of a 22% Cr duplex stainless steel: influence of nano-sized chromium nitrides and exposure temperature”. Electrochimica Acta, 113, 280-289 (2013).

88.   M. Forslund, C. Leygraf, P.M. Claesson, C. Lin, J. Pan, “Micro-galvanic corrosion effects on patterned copper-zinc samples during exposure in humidified air containing formic acid”, J. Electrochem. Soc., 160, C423-431 (2013).

89.   E. Bettini, C. Leygraf, J. Pan, “Nature of current increase for CoCrMo biomedical alloys: “transpassive” dissolution vs. water oxidation”, Intern. J. Electrochem.Soc., 8, 11791-11804 (2013).

90.   S. Jafarzadeh, M. Johansson, P-E. Sundell, M. Claudino, J. Pan, P. M. Claesson, “UV-curable acrylate-based nanocomposites-effect of polyaniline additives on the curing performance”, Polymers for Advanced Technologies, 24, 668-678 (2013).

91.   F. Zhang, T. Brinck, B.D. Brandner, P.M. Claesson, A. Dedinaite, J. Pan, “In-situ confocal Raman micro-spectroscopy and electrochemical studies of mussel adhesive protein and ceria composite film on carbon steel in salt solutions”, Electrochimica Acta, 107, 276-291 (2013).

92.   R. Á. Asencio, J. Pan, E. Thormann, M. W. Rutland, “Tribological properties mapping: local variation in friction coefficient and adhesion”, Tribol. Letters, 50, 387-395 (2013).

93.   F. Zhang, M. Sababi, T. Brinck, D. Persson, J. Pan, P. M. Claesson, “In-situ investigations of Fe3+ induced complexation of adsorbed Mefp-1 film on iron substrate”, J. Colloid and Interface Science, 404, 62-71 (2013).

94.   M. Forslund, C. Leygraf, C. Lin, J. Pan, “Radial spreading of localized corrosion-induced selective leaching on a-brass in dilute NaCl solution”, Corrosion, 69, 468-476 (2013).

95.   A. Davoodi, J. Pan, C. Leygraf, R. Parvizi, S. Norgren, “An insight into the influence of morphological and compositional heterogeneity of an individual intermetallic particle on aluminum alloy corrosion initiation”, Materials and Corrosion, 64, 195-198 (2013).

96.   C. Ye, R. Hu, S. Dong, X. Zhang, R. Hou, R. Du, C. Lin, J. Pan, “EIS analysis on chloride-induced corrosion behavior of reinforcement steel in simulated carbonated concrete pore solutions”, J. Electroanalytical Chem., 688, 275-281 (2013).

97.   M. Sababi, S. Ejnermark, J. Andersson, P. M. Claesson, J. Pan, “Microstructure influence on corrosion behavior of a Fe-Cr-V-N tool alloy studied by SEM/EDS, scanning Kelvin force microscopy and electrochemical measurement”, Corro. Sci., 66, 153-159 (2013).

98.   M. Cieślik, S. Zimowski, M. Gołda, K. Engvall, J. Pan, W. Rakowski, A. Andrzej Kotarba, “Engineering of bone fixation metal implants biointerface—Application of parylene C as versatile protective coating”, Mater. Sci. Eng. C, 32, 2431-2435 (2012).

99.   F. Zhang, J. Pan, P. M. Claesson, T. Brinck, “Electrochemical, Atomic Force Microscopy and Infrared Reflection Absorption Spectroscopy studies of pre-formed mussel adhesive protein films on carbon steel for corrosion protection”, Thin Solid Films, 520, 7136-7143 (2012). 

100.E. Bettini, C. Leygraf, C. Lin, P. Liu, J. Pan, “Influence of Grain Boundaries on Dissolution Behavior of a Biomedical CoCrMo Alloy: In-Situ Electrochemical-Optical, AFM and SEM/TEM Studies”, J. Electrochem. Soc., 159, C422-C427 (2012).

101.C. Ye, R. Hu, Y. Li, C. Lin, J. Pan, “Probing the vertical profiles of potential in a thin layer of solution close to electrode surface during localized corrosion of stainless steel”, Corro. Sci., 61, 242-245 (2012).

102.M. Sababi, F. Zhang, O. Krivosheeva, M. Forslund, J. Pan, P. M. Claesson, A. Dedinaite, “Thin Composite Films of Mussel Adhesive Proteins and Ceria Nanoparticles on Carbon Steel for Corrosion Protection”, J. Electrochem. Soc., 159, C364-C371 (2012).

103.A. Davoodi, J. Pan, C. Leygraf, R. Parvizi, “Minuscule device for hydrogen generation/electrical energy collection system on aluminium alloy surface”, Int. J. Hydrogen Energy, 36, 2855-2859 (2011).

104.E. Bettini, T. Eriksson, M. Boström, C. Leygraf, J. Pan,“Influence of metal carbides on dissolution behavior of biomedical CoCrMo alloy: SEM, TEM and AFM studies”, Electrochimica Acta, 56, 9413-9419 (2011).

105.S. Jafarzadeh, E. Thormann, T. Rönnevall, A. Adhikari, P-E. Sundell, J. Pan, P.M. Claesson, “Towards homogenous nanostructured polyaniline composite coatings”, ACS Applied Materials & Interfaces, 3, 1681–1691 (2011).  

106.B. Rosborg, T. Kosec, A. Kranjc, J. Pan, A. Legat, “Electrochemical impedance spectroscopy of pure copper exposed in bentonite under oxic conditions”, Electrochimica Acta, 56, 7862-7870 (2011).

107.S. Jafarzadeh, A. Adhikari, P.-E. Sundall, J. Pan, “Study of PANI-MeSA conducting polymer dispersed in UV-curing polyester acrylate on galvanized steel as corrosion protection coating”, Prog. Org. Coat., 70, 108-115 (2011).

108.N. Sathirachinda, R. Pettersson, S. Wessman, U. Kivisäkk, J. Pan, “SKPFM study of chromium nitrides in 2507 super duplex stainless steels – implications and limitations”, Electrochim. Acta, 56, 1792-1798 (2011).

109.F. Zhang, J. Pan, P. Claesson, “Electrochemical and AFM studies of Mussel Adhesive Protein (Mefp-1) as corrosion inhibitor for carbon steel”, Electrochim. Acta, 56, 1636-1645 (2011).

110.M. Cieślik, K. Engvall, J. Pan, A. Kotarba, “Silane-parylene coating for improving corrosion resistance of stainless steel 316L implant material”, Corros. Sci., 53, 296-301 (2011).

111.N. Sathirachinda, R. Pettersson, S. Wessman, J. Pan, “Study of nobility of chromium nitrides in isothermally aged duplex stainless steels by using SKPFM and SEM/EDS”, Corros. Sci., 52, 179-189 (2010).

112.R. Hu, A. Ornberg, J. Pan, “Electrochemical and local probe investigations of influence of small particles in MP35N on the corrosion resistance in synthetic biological environment”, J. Electrochem. Soc., 156, C341-C344 (2009).

113.F. Zhang, J. Pan, C. Lin, “Localized corrosion behaviour of reinforcement steel in simulated concrete pore solution”, Corros. Sci., 51, 2130-2138 (2009).

114.N. Sathirachinda, R. Pettersson, J. Pan, “Depletion effects at phase boundaries in 2205 duplex stainless steel characterized with SKPFM and TEM/EDS”, Corros. Sci., 51, 1850-1860 (2009).

115.A. Davoodi, A. Farzadi, J. Pan, C. Leygraf, Y. Zhu, “Developing an AFM-based SECM system; Instrumental setup, SECM simulation, characterization, and calibration”, J. Electrochem. Soc., 155, C474-C485 (2008).

116.B. Rosborg, J. Pan, “An electrochemical impedance spectroscopy study of copper in a bentonite/saline groundwater environment”, Electrochim. Acta, 53, 7556-7564 (2008).  

117.N. Sathirachinda, R. Gubner, J. Pan, U. Kivisäkk, “Characterization of phases in duplex stainless steel by magnetic force microscopy/scanning Kelvin probe force microscopy”, Electrochem. Solid-State Lett., 11, C42-C45, 2008.

118.A. Davoodi, J. Pan, C. Leygraf, S. Norgren, “The role of intermetallic particles in localized corrosion of aluminium alloy studied by SKPFM and integrated AFM/SECM”, J. Electrochem. Soc., 155, C211-C218 (2008).

119.A. Adhikari, P. Claesson, J. Pan, C. Leygraf, A. De´dinaite´, E. Blomberg, “Electrochemical behavior and anticorrosion properties of modified polyaniline dispersed in polyvinylacetate coating on carbon steel”, Electrochim. Acta, 53, 4239-4247 (2008).

120.A. Davoodi, J. Pan, C. Leygraf, S. Norgren, “Multi-analytical and in-situ studies of localized corrosion of EN AW-3003 alloy – influence of intermetallic particles”, J. Electrochem. Soc., 155, C138-C146 (2008).

121.J. Öijerholm, J. Pan, Q. Lu, C. Leygraf, “In-situ impedance spectroscopy study of electrical conductivity and ionic transport in thermally grown oxide films on a commercial FeCrAl alloy”, Oxi. Met., 68, 253-269 (2007).

122.A. Ornberg, J. Pan, M. Herstedt, C. Leygraf, “Corrosion resistance, chemical passivation and metal release of 35N LT and MP35N for biomedical material application”, J. Electrochem. Soc., 154, C546-C551 (2007).

123.J. Öijerholm, G. Fafilek, J. Pan, “Study of Initial Oxidation of Engineering Alloys by High Temperature Cyclic Voltammetry”, Electrochem. Solid-State Lett., 10, C47-C50 (2007).

124.K. Midander, J. Pan, I. Odnevall Wallinder, C. Leygraf, “Nickel release from nickel particles in artificial sweat”, Contact Dermatitis, 56, 325-330 (2007).

125.A. Davoodi, J. Pan, C. Leygraf, S. Norgren, “Integrated AFM and SECM for in-situ studies of localized corrosion of Al-alloys”, Electrochim. Acta, 52, 7697-7705 (2007).

126.K. Midander, J. Pan, I. Odnevall Wallinder, C. Leygraf, “Metal release from stainless steel particles in vitro – influence of particle size”, J. Environ. Monitor., 9, 74-81 (2007).

127.A. Norlin, J. Pan, C. Leygraf, “Fabrication of porous Nb2O5 by plasma electrolysis anodization and electrochemical characterization of the oxide”, J. Electrochem. Soc., 153, B225-B230 (2006).

128.A. Davoodi, J. Pan, C. Leygraf, S. Norgren, “Probing of local dissolution of Al-alloys in chloride solutions by AFM and SECM”, Appl. Surf. Sci., 252, 5499-5503 (2006).

129.K. Midander, J. Pan, C. Leygraf, “Elaboration of a test method for the study of metal release from stainless steel particles in artificial biological media”, Corros. Sci., 48, 2855-2866 (2006).

130. J. Öijerholm, J. Pan, C. Leygraf, “In situ measurements by impedance spectroscopy of highly resistive a-alumina”, Corros. Sci., 48, 243-257 (2006).

131. B. Rosborg, J. Pan, C. Leygraf, “Tafel slopes used in monitoring of copper corrosion in a bentonite/groundwater environment”, Corros. Sci., 47, 3267-3279 (2005).

132. A. Norlin, J. Pan, C. Leygraf, “Electrochemical behavior of stimulation/sensing materials for pacemaker electrode applications. III. Nano-porous and smooth carbon electrodes”, J. Electrochem. Soc., 152, J110-116 (2005).

133. A. Norlin, J. Pan, C. Leygraf, “Investigation of electrochemical behavior of stimulation/sensing materials for pacemaker electrode applications. II. Conductive oxide electrodes”, J. Electrochem. Soc., 152, J85-J92 (2005).

134. A. Davoodi, J. Pan, C. Leygraf, S. Norgren, “In situ investigation of localized corrosion of aluminum alloys in chloride solution using integrated EC-AFM/SECM techniques”, Electrochem. Solid-State Lett., 8, B21-B24 (2005).

135. A. Norlin, J. Pan, C. Leygraf, “Investigation of electrochemical behavior of stimulation/sensing materials for pacemaker electrode applications. I. Pt, Ti and TiN coated electrodes”, J. Electrochem. Soc., 152, J7-J15 (2005).

136. J. Pan, J. Öijerholm, A. B. Belonoshko, A. Rosengren, C. Leygraf, “Self-diffusion activation energies in a-Al2O3 below 1000 C. Measurements and molecular dynamics calculations”, Philosophical Magazine Letters, 84, 781-789 (2004).

137. C. Leygraf, J. Pan, M. Femenia, “Microscopic Corrosion Studies of Duplex Stainless Steels”, Acta Metall. Sin. (English Letters), Vol. 17, No. 5, 114 (2004).

138. J. Öijerholm, J. Pan, B. Jönsson, “Influence of grain size on ionic conductivity of pure and dense a-Al2O3 in the temperature range 400-1000oC”, Mater. Sci. Forum, 461-464, 865-872 (2004).

139. B. Rosborg, J. Pan, D. Eden, O. Karnland, L. Werme, “Real-time monitoring of copper corrosion at the Äspö Hard Rock Laboratory”, CORROSION/2004, paper no. 04687.

140. M. Femenia, J. Pan, C. Leygraf, “Corrosion Studies of Duplex Stainless Steels with Micrometer Resolution”, J. Corr. Sci. Eng., 6 (2004) paper 28.

141. A. Norlin, J. Pan, C. Leygraf, “Investigation of Pt, Ti, TiN and nano-porous carbon electrodes for implantable cardioverter-defibrillator applications”, Electrochim. Acta, 49, 4011-4020 (2004).

142. M. Femenia, J. Pan, C. Leygraf, “Characterization of ferrite-austenite boundary region of duplex stainless steels by scanning Auger electron microscopy”, J. Electrochem. Soc., 151, B581-B585 (2004).

143. M. Femenia, C. Canalias, J. Pan, C. Leygraf, “Scanning Kelvin probe force microscopy and magnetic force microscopy for characterization of duplex stainless steels”, J. Electrochem. Soc., 150, B274 (2003).

144. M. Femenia, J. Pan, C. Leygraf, “In-situ local dissolution of duplex stainless steels in 1M H2SO4 + 1M NaCl by electrochemical scanning tunneling microscopy”, J. Electrochem. Soc., 149, B187 (2002).

145. A. Norlin, J. Pan, C. Leygraf, “Investigation of interfacial capacitance of Pt, Ti, and TiN coated electrodes by electrochemical impedance spectroscopy”, Biomolecular Engineering, 19, 67 (2002).

146. K. Mustafa, J. Pan, J. Wroblewski, C. Leygraf, K. Arvidson, “EIS and XPS analysis of titanium surfaces cultured with osteoblast-like cells derived from human mandibular bone”, J. Biomed. Mater. Res., 59, 655 (2002).

147. X. Zhang, W. He, I. Odnevall Wallinder, J. Pan, C. Leygraf, “Determination of instantaneous corrosion rates and runoff rates of copper from naturally patinated copper during continuous rain events”, Corros. Sci., 44, 2131 (2002). 

148. M. Femenia, J. Pan, C. Leygraf, P. Luukkonen, “In-situ” study of selective dissolution of duplex stainless steel 2205 by electrochemical scanning tunneling microscopy”, Corros. Sci., 43, 1939 (2001).

149. S. Rudenja, J. Pan, I. Odnevall Wallinder, C. Leygraf, P. Kulu, V. Mikli, “Enhanced passivity of austenitic AISI 304 stainless steel by low-temperature ion nitriding,” J. Vac. Sci. Technol. A, 19(4), 1425 (2001).

150. J. Pan, B. Jönsson, P. Lundström, “In-situ impedance spectroscopy measurements of Fe-Cr-Al alloys in a flame plasma,” Materials Science Forum, 369-372, 849 (2001).

151. D. Wallinder, J. Pan, C. Leygraf, A. Delblanc-Bauer, “Electrochemical investigation of pickled and polished 304L stainless steel tubes”, Corros. Sci., 42, 1457 (2000).

152. J. Pan, C. Karlén, C. Ulfvin, “Electrochemical study of resistance against localized corrosion of stainless steels for biomaterial applications,” J. Electrochem. Soc., 147, 1021 (2000).

153. S. Rudenja, J. Pan, I. Odnevall-Wallinder, C. Leygraf, P. Kulu, “Passivation and anodic oxidation of duplex TiN coating on stainless steel", J. Electrochem. Soc., 146, 4082 (1999).

154. S. Rudenja, C. Leygraf, J. Pan, P. Kulu, E. Talimets, V. Mikli, “Duplex TiN coatings deposited by arc plating for increasing corrosion resistance of stainless steel substrate,” Surface and Coatings Technology, 114, 129 (1999).

155. D. Wallinder, J. Pan, C. Leygraf, A. Delblanc-Bauer, “EIS and XPS study of surface modification of 316LVM stainless steel due to passivation processes,” Corros. Sci., 41, 275 (1999).

156. J. Pan, C. Leygraf, T. Otsuka, R.J. Pettersson, B. Ivarsson, J. Lindén, “EIS study of high-temperature oxide films on a stainless steel (253MA) - influence of alloying elements,” Materials Science Forum, 289-292, 1181 (1998).

157. J. Pan, C. Leygraf, R.J. Pettersson, J. Lindén, “Characterization of high temperature oxide films on stainless steels by electrochemical impedance spectroscopy,” Oxid. Metal, 50, 5/6, 431 (1998).

158. J. Pan, H. Liao, C. Leygraf, D. Thierry, J. Li, “Variation of oxide films on titanium induced by osteoblast-like cell culture and influence of an H2O2 pretreatment,” J. Biomed. Mater. Res., 40, 244 (1998).

159. J. Pan, C. Leygraf, D. Thierry, A.M. Ektessabi, “Corrosion resistance for biomaterial applications of TiO2 films deposited on titanium and stainless steel by ion-beam-assisted sputtering,” J. Biomed. Mater. Res., 35, 309 (1997).

160. J. Pan, D. Thierry, C. Leygraf, “Electrochemical impedance spectroscopy study of the passive oxide film on titanium for implant applications,” Electrochim. Acta, 41, 1143 (1996).

161. J. Pan, D. Thierry, C. Leygraf, “Hydrogen peroxide toward enhanced oxide growth on titanium in PBS solution: Blue coloration and clinical relevance,” J. Biomed. Mater. Res., 30, 393 (1996).

162. J. Pan, J. Geis-Gerstorfer, D. Thierry, C. Leygraf, “Electrochemical studies of the influence of beryllium on the corrosion resistance of Ni-25Cr-10Mo cast alloys for dental applications,” J. Electrochem. Soc., 142, No.5, 1454 (1995).

163. J. Pan, D. Thierry, C. Leygraf, “Electrochemical and XPS studies of titanium for biomaterial application with respect to the effect of hydrogen peroxide,” J. Biomed. Mater. Res., 28, 113 (1994).

164. A. A. Ejov, S. V. Savinov, I. V. Yaminsky, J. Pan, C. Leygraf, D. Thierry, “Ex-situ scanning tunneling microscopy investigation of the modification of titanium surface due to corrosion processes,” J. Vac. Sci. Technol. B, 12, No.3, 1547 (1994).

 

Conference proceedings:

(165) D. Cui, V.V. Rondinella, J. Low, J. Pan, G. Tamborini, K. Spahiu, “On the Behaviour of Spent Fuel under Simulated Early Canister-failure Conditions”, pp. 925-932, Proc. of the 11th International High-Level Radioactive Waste Management Conference (IHLRWM), American Nuclear Society, April 30-May 4, 2006, Las Vegas, Nevada, USA.

(166) S. Norgren, A. Davoodi, J. Pan, C. Leygraf, “Corrosion mechanism of Al-Mn-Si-Zr alloys used in heat exchanger applications” pp. 73-78, Proc. of Aluminium Surface Science and Technology, 4th International Symposium, May 14-18, 2006, Beaune, France.

(167) J. Pan, A. Norlin, C. Leygraf, “Investigation of electrochemical behavior of stimulation/sensing electrode materials for pacemaker applications”, paper no. 14-33, 16th International Corrosion Congress, Sept. 19-24, 2005, Beijing, China.  

(168) J. Pan, A. Davoodi, C. Leygraf, S. Norgren, “Application of combined electrochemical AFM and SECM for in-situ study of localized corrosion of Al alloys in chloride solutions”, paper no. 9-31, 16th International Corrosion Congress, Sept. 19-24, 2005, Beijing, China.

(169) A. Davoodi, J. Pan, C. Leygraf, S. Norgren, “Integration of scanning electrochemical microscopy and atomic force microscopy for in-situ investigation of localized corrosion”, paper no. 19-19, 16th International Corrosion Congress, Sept. 19-24, 2005, Beijing, China.  

(170) B. Rosborg, D. Eden, O. Karnland, J. Pan, L. Werme, “The corrosion rate of copper in a test parcel at the Äspö hard rock laboratory”, paper no. 119, MRS symposium on the scientific basis for nuclear waste management, XXVII, June 15-18, 2003, Kalmar, Sweden.

(171) J. Pan, C. Leygraf, and B. Jönsson, “Impedance spectroscopy study of transport properties of high-temperature oxide films formed on Kanthal APM”, paper no.179, 15th International Corrosion Congress, Sept. 22-27, 2002, Granada, Spain.

(172) J. Pan and C. Leygraf, “Surface roughness and non-ideal capacitive response in EIS”, paper no. 161, 7th International Symposium on Electrochemical Methods in Corrosion Research, May 28-June 1, 2000, Budapest, Hungary.

(173) M. Femenia, P. Luukkonen, J. Pan, and C. Leygraf, “In-situ electrochemical STM study of dissolution behavior of duplex stainless steels in aggressive solutions”, Proc. 6th World Duplex Conference, Oct. 17-20, 2000, Venice, Italy, pp.261-270.  

(174) J. Pan, M. Femenia, and C. Leygraf, “Corrosion behavior of a duplex stainless steel studied by STM/AFM based scanning electrochemical microscopy,” Proc. Symp. Localized In-Situ Methods for Investigating Electrochemical Interfaces, The Electrochemical Society Meeting, Oct. 17-22, 1999, Honolulu, USA, pp. 131-146. 

(175) J. Pan and C. Leygraf, “EIS study of oxide films formed on stainless steels in H2 at high temperatures,” Proc. of 4th International Symposium on Electrochemical Impedance Spectroscopy, Aug. 2-8, 1998, Rio de Janeiro, Brazil, pp. 357-359.

(176) J. Pan, C. Leygraf, R. J. Pettersson, and B. Jönsson, ”EIS characterization of oxide films formed on a Fe-Cr-Al alloy in air at 750 and 1100 °C – influence of water vapor,” Proc. 7th European Conference on Applications of Surface Analysis, I. Olefjord, L. Nyborg and D. Briggs (eds.), June 16-20, 1997, Göteborg, Sweden, John Wiley & Sons, pp. 321-324.

(177) J. Pan, D. Thierry, and C. Leygraf, “Corrosion studies of dental Ni-Cr alloys” Proc. 12th. Scand. Corr. Congress & Eurocorr' 92, May 31–June 4, 1992, Espoo, Finland, pp. 683-693.