Publications by Stefan Hallström

Peer reviewed

Articles

[1]

H. Delmotte, S. Clementz and S. Hallström, "Enclosed blast response of fibre-reinforced composite plates - with and without pre-damage," International Journal of Impact Engineering, vol. 210, 2026.

[2]

I. Seglina et al., "Sex and Isolated Anthropometric Measures Do Not Explain Individual Differences in Responsiveness to Advanced Footwear Technology in Highly Trained Runners," Scandinavian Journal of Medicine and Science in Sports, vol. 36, no. 2, 2026.

[3]

A. Nakagawa et al., "Topology-constrained U-Net for delamination mapping in ballistic-damaged thin GFRP," Composites Part B : Engineering, vol. 311, 2026.

[4]

M. Arnesen et al., "A comparative study of constitutive models for EPS foam under combined compression and shear impact loading for helmet applications," Results in Engineering (RINENG), vol. 23, 2024.

[5]

T. Eckermann, F. Stig and S. Hallström, "Non-conformance aspects of moulded composite materials and “corresponding” simulation models with 3D textile reinforcement," Composites. Part A, Applied science and manufacturing, vol. 186, 2024.

[6]

M. S. Rajput, M. Burman and S. Hallström, "Evaluation of test methods and face-sheet thickness effects in damage tolerance assessment of composite sandwich plates," Journal of Sandwich Structures and Materials, vol. 24, no. 2, pp. 1340-1366, 2022.

[7]

C. Oddy et al., "A framework for macroscale modelling of inelastic deformations in 3D-woven composites," Mechanics of materials, vol. 160, 2021.

[8]

S. Akbarpour and S. Hallström, "Enhancing the performance of bolted joints in composites by use of patched steel or titanium inserts," Composite structures, vol. 275, 2021.

[9]

E. Hörberg, M. Åkermo and S. Hallström, "Moisture effect on shape distortions of curved quasi-isotropic prepreg composite laminates," Composites. Part A, Applied science and manufacturing, vol. 145, 2021.

[10]

F. Stig and S. Hallström, "Extended framework for geometric modelling of textile architectures," Composite structures, vol. 244, 2020.

[11]

S. Akbarpour and S. Hallström, "Strength improvement of bolted joints in composite materials by use of patched metal inserts," Composite structures, vol. 52, 2020.

[12]

A. Shipsha, S. Hallström and M. Burman, "Effect of stacking sequence and bundle waviness in quasi-isotropic NCF composites subjected to compression," Composites Part B : Engineering, vol. 178, 2019.

[13]

F. Stig and S. Hallström, "Effects of Crimp and Textile Architecture on the Stiffness and Strength Composites with 3D Reinforcement," Advances in Materials Science and Engineering, 2019.

[14]

M. S. Rajput, "Experimental and numerical study of the response to various impact energy levels for composite sandwich plates with different face thicknesses," Journal of Sandwich Structures and Materials, pp. 1654-1682, 2019.

[15]

C. Oddy et al., "Predicting damage initiation in 3D fibre-reinforced composites : the case for strain-based criteria," Composite structures, vol. 230, pp. 111336, 2019.

[16]

T. Ekermann and S. Hallström, "Pull-off tests of CFRP T-joints with conventional and 3D reinforced fillets," Composite structures, vol. 223, 2019.

[17]

S. Akbarpour and S. Hallström, "Reinforcement around holes in composite materials by use of patched metal inserts," Composite structures, vol. 225, 2019.

[18]

E. Hörberg et al., "Thickness effect on spring-in of prepreg composite L-profiles – An experimental study," Composite structures, vol. 209, pp. 499-507, 2019.

[19]

M. S. Rajput et al., "Design and evaluation of a novel instrumented drop-weight rig for controlled impact testing of polymer composites," Polymer testing, vol. 68, pp. 446-455, 2018.

[20]

M. S. Rajput et al., "Compression of structural foam materials : Experimental and numerical assessment of test procedure and specimen size effects," Journal of Sandwich Structures and Materials, 2017.

[21]

J. Köll and S. Hallström, "Influence from polydispersity on the morphology of Voronoi and equilibrium foams," Journal of cellular plastics (Print), vol. 53, no. 2, pp. 199-214, 2017.

[22]

B. Wucher et al., "Nonconformal mesh-based finite element strategy for 3D textile composites," Journal of composite materials, vol. 51, no. 16, pp. 2315-2330, 2017.

[23]

S. Kazemahvazi et al., "Confluent 3D-assembly of fibrous structures," Composites Science And Technology, vol. 127, pp. 95-105, 2016.

[24]

J. Köll and S. Hallström, "Elastic properties of equlibrium foams," Acta Materialia, vol. 113, pp. 11-18, 2016.

[25]

M. W. Tahir et al., "A numerical study of the influence from architecture on the permeability of 3D-woven fibre reinforcement," Composites. Part A, Applied science and manufacturing, vol. 74, pp. 18-25, 2015.

[26]

M. W. Tahir, S. Hallström and M. Åkermo, "Effect of dual scale porosity on the overall permeability of fibrous structures," Composites Science And Technology, vol. 103, pp. 56-62, 2014.

[27]

J. Köll and S. Hallström, "Generation of periodic stochastic foam models for numerical analysis," Journal of cellular plastics (Print), vol. 50, no. 1, pp. 37-54, 2014.

[28]

F. Stig and S. Hallström, "Influence of Crimp on 3D-woven Fibre Reinforced Composites," Composite structures, vol. 95, pp. 114-122, 2013.

[29]

F. Stig and S. Hallström, "A Modelling Framework for Composites containing 3D Reinforcement," Composite structures, vol. 94, no. 9, pp. 2895-2901, 2012.

[30]

F. Stig and S. Hallström, "Spatial modelling of 3D-woven textiles," Composite structures, vol. 94, no. 5, pp. 1495-1502, 2012.

[31]

A. Lindström and S. Hallström, "Energy absorption of SMC/balsa sandwich panels with geometrical triggering features," Composite structures, vol. 92, no. 11, pp. 2676-2684, 2010.

[32]

A. Lindström and S. Hallström, "In-plane compression of sandwich panels with debonds," Composite structures, vol. 92, no. 2, pp. 532-540, 2010.

[33]

F. Stig and S. Hallström, "Assessment of the mechanical properties of a new 3D woven ﬁbre composite material," Composites Science And Technology, vol. 69, no. 11-12, pp. 1686-1692, 2009.

[34]

R. Juntikka and S. Hallström, "Shear characterization of sandwich core materials using four-point bending," Journal of Sandwich Structures and Materials, vol. 9, no. 1, pp. 67-94, 2007.

[35]

G. Kelly and S. Hallström, "Strength and failure mechanisms of composite laminates subject to localised transverse loading," Composite structures, vol. 69, no. 3, pp. 301-314, 2005.

[36]

G. Kelly and S. Hallström, "Bearing strength of carbon fibre/epoxy laminates : effects of bolt-hole clearance," Composites Part B : Engineering, vol. 35, no. 4, pp. 331-343, 2004.

[37]

P. H. Bull and S. Hallström, "Curved sandwich beams with face-core debond subjected to bending moment," Journal of Sandwich Structures and Materials, vol. 6, no. 2, pp. 115-127, 2004.

[38]

P. H. Bull and S. Hallström, "High-velocity and quasi-static impact of large sandwich panels," Journal of Sandwich Structures and Materials, vol. 6, no. 2, pp. 97-113, 2004.

[39]

R. Juntikka, S. Kleiven and S. Hallström, "Optimization of single skin surfaces for head injury prevention - a comparison of optima calculated for global versus local injury thresholds," International Journal of Crashworthiness, vol. 9, no. 4, pp. 365-379, 2004.

[40]

R. Juntikka and S. Hallström, "Selection of energy absorbing materials for automotive head impact countermeasures," Cellular polymers, vol. 23, no. 5, pp. 263-297, 2004.

[41]

R. Juntikka and S. Hallström, "Weight-balanced drop test method for characterization of dynamic properties of cellular materials," International Journal of Impact Engineering, vol. 30, no. 5, pp. 541-554, 2004.

[42]

A. Shipsha, S. Hallström and D. Zenkert, "Failure mechanisms and modelling of impact damage in sandwich beams - A 2D approach : Part I - Experimental investigation," Journal of Sandwich Structures and Materials, vol. 5, no. 1, pp. 7-31, 2003.

[43]

A. Shipsha, S. Hallström and D. Zenkert, "Failure mechanisms and modelling of impact damage in sandwich beams - A 2D approach : Part II - Analysis and modelling," Journal of Sandwich Structures and Materials, vol. 5, no. 1, pp. 33-51, 2003.

[44]

S. Ribeiro-Ayeh and S. Hallström, "Strength prediction of beams with bi-material butt-joints," Engineering Fracture Mechanics, vol. 70, no. 12, pp. 1491-1507, 2003.

[45]

S. Hallström and J. L. Grenestedt, "Mixed mode fracture of cracks and wedge shaped notches in expanded PVC foam," International Journal of Fracture, vol. 88, no. 4, pp. 343-358, 1998.

[46]

J. L. Grenestedt and S. Hallström, "Crack initiation from homogeneous and bimaterial corners," Journal of applied mechanics, vol. 64, no. 4, pp. 811-818, 1997.

[47]

S. Hallström and J. L. Grenestedt, "Failure analysis of laminated timber beams reinforced with glass fibre composites," Wood Science and Technology, vol. 31, pp. 17-34, 1997.

[48]

S. Hallström, "Glass fibre reinforced holes in laminated timber," Wood Science and Technology, vol. 30, pp. 323-337, 1996.

[49]

J. L. Grenestedt, S. Hallström and J. Kuttenkeuler, "On cracks emanating from wedges in expanded PVC foam," Engineering Fracture Mechanics, vol. 54, no. 4, pp. 445-456, 1996.

Conference papers

[50]

H. Delmotte, S. Clementz and S. Hallström, "Enclosed blast response of pre-damaged composite plates in barrel experiments," in Proceedings - 34th International Symposium on Ballistics, BALLISTICS 2025, 2025, pp. 751-762.

[51]

C. Oddy et al., "Evaluation of damage initiation models for 3D-woven fibre composites," in ECCM 2018 - 18th European Conference on Composite Materials, 2019.

[52]

N. Khokar, S. Hallström and F. Winberg, "Increasing energy absorption and reliability of beams by improved architecture and web-flange junctions," in Advanced Materials for Defense : 1st World Conference on Advanced Materials for Defense (AUXDEFENSE 2018), 2019, pp. 114-119.

[53]

M. S. Rajput, M. Burman and S. Hallström, "Impact resistance and damage tolerance assessment of composite sandwich materials for aircraft," in 12th International Conference on Sandwich Structures ICSS, 2018, pp. 261-263.

[54]

C. Franciscangelis et al., "Vibration measurement on composite material with embedded optical fiber based on phase-OTDR," in Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2017, 2017.

[55]

S. Akbarpour and S. Hallström, "Metal reinforcement around fastener holes in composites," in ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials, 2016.

[56]

B. Woucher et al., "A non-conformal finite element approach to determine the elastic properties of complex woven composites with simple geometrical modeling," in Texcomp-12 Conference, Raleigh, NC, USA, 2015, 2015.

[57]

S. Hallström and J. Köll, "Architecture and properties of stochastic foam models," in 20th International Conference on Composite Materials, 2015.

[58]

M. S. Rajput, M. Burman and S. Hallström, "Distinguishing between strain measurement procedures during compressive testing of foam materials," in 20th International Conference on Composite Materials, ICCM 2015, 2015.

[59]

T. Ekermann and S. Hallström, "Mechanical Characterisation Of Composites With 3D-Woven Reinforcement," in 20Th International Conference On Composite Materials, 2015.

[60]

B. Wucher et al., "Non-conformal finite element homogenization applied to woven composites with complex textile architectures," in 20th International Conference on Composite Materials, Copenhagen, Denmark, 2015, 2015.

[61]

N. Khokar, F. Winberg and S. Hallström, "Novel 3D Preform Architecture For Performance And Reliability Of Structural Beams," in 20Th International Conference On Composite Materials, 2015.

[62]

A. Burvall et al., "Phase-retrieval methods with applications in composite-material tomography," in 11th International Conference On X-Ray Microscopy (XRM2012), 2013, p. 012015.

[63]

S. Hallström, "3D-textile reinforcement in composites- mechanics, modelling, pros and cons," in ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials, 2012.

[64]

M. W. Tahir, S. Hallström and M. Åkermo, "Interlaminar strength and 3D reinforcement of Carbon-Polyamide 12 composite material," in ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials, 2012.

[65]

A. Rosén et al., "3+2≠5 eller Programmål för ingenjörsutbildningar i ljuset av Bolognareformen," in 3:e Utvecklingskonferensen för Sveriges ingenjörsutbildningar, 2011, pp. 47-52.

[66]

K. Edström, S. Hallström and J. Kuttenkeuler, "Mini Workshop - Designing Project-Based Courses for Learning and Cost-Effective Teaching," in 2011 Frontiers In Education Conference (FIE), 2011.

[67]

F. Stig and S. Hallström, "Modelling of Composites containing 3D-woven Reinforcement," in Proceedings of the 3rd World Conference on 3D Fabrics and Their Applications, 2011, pp. 142-147.

[68]

J. Köll and S. Hallström, "Morphology effects on constitutive properties of foams," in 18th International Conference on Composite Materials, 2011.

[69]

F. Stig and S. Hallström, "Constitutive modelling of composite materials with full 3D orientation of reinforcement," in Proceedings of the 14th European Conference on Composite Materials (ECCM-14), 2010.

[70]

A. Lindström and S. Hallström, "Energy Absorption of Sandwich Panels Subjected to In-plane Loads," in 8th Biennial ASME Conference on EngineeringSystems Design and Analysis, Torino, Italy, 4-7 July, 2006 : Volume 3: Dynamic Systems and Controls, Symposium on Design and Analysis of Advanced Structures, and Tribology, 2006, pp. 739-747.

[71]

P. Y. Young et al., "Design and development of CDIO student workspaces - Lessons learned," in 2005 ASEE Annual Conference and Exposition : The Changing Landscape of Engineering and Technology Education in a Global World, 2005, pp. 2867-2880.

[72]

K. Edström et al., "Integrated Assessment of Diciplinary, Personal and Interpersonal Skills in a Design-Build Course," in 1st CDIO Conference, 2005.

[73]

S. Hallström and S. Ribeiro-Ayeh, "Stochastic finite element models of foam materials," in SANDWICH STRUCTURES7 : ADVANCING WITH SANDWICH STRUCTURES AND MATERIALS, 2005, pp. 935-943.

[74]

J. Malmqvist et al., "Lessons learned from design-build-test-based project courses," in Design 2004 : Proceedings of the 8th International Design Conference, Vols 1-3, 2004, pp. 665-672.

Non-peer reviewed

Conference papers

[75]

S. Hallström, J. Kuttenkeuler and K. Edström, "The Route Towards a Sustainable Design-Implement Course," in 3rd CDIO Conference, 2007.

[76]

K. Edström et al., "Integrated assessment of diciplinary and interpersonal skills - student perceptions of a novel learning experience," in 13th International Symposium at the Oxford Centre for Staff and Learning Development - Improved Student Learning Through Assessment, 2005.

[77]

D. Zenkert, S. Hallström and P. Wennhage, "Higher education in sandwich structures," in 6th International Conference on Sandwich Construction, 2003.