Skip to main content
Till KTH:s startsida Till KTH:s startsida

Publications by Mikael Lindström

Peer reviewed

Articles

[1]
P. A. Lindén et al., "Adapting the kraft cooking process in glycerol media. Studies of impregnation kinetics," Nordic Pulp & Paper Research Journal, vol. 38, no. 1, pp. 9-18, 2023.
[3]
L. Chen et al., "A modified ionization difference UV-vis method for fast quantitation of guaiacyl-type phenolic hydroxyl groups in lignin," International Journal of Biological Macromolecules, vol. 201, pp. 330-337, 2022.
[5]
E. Heinonen et al., "Xylan adsorption on cellulose : Preferred alignment and local surface immobilizing effect," Carbohydrate Polymers, vol. 285, pp. 119221-119221, 2022.
[7]
S. Starrsjö et al., "Assessment of Q(OP)D(PO) bleachability of softwood kraft pulp," Nordic Pulp & Paper Research Journal, vol. 36, no. 4, pp. 582-593, 2021.
[8]
L. Nosach et al., "Gas-phase crosslinking of the lignin on the nanoscale fumed silica surface," PHYSICS AND CHEMISTRY OF SOLID STATE, vol. 22, no. 4, pp. 724-728, 2021.
[11]
J. Berglund et al., "Acetylation and Sugar Composition Influence the (In)Solubility of Plant beta-Mannans and Their Interaction with Cellulose Surfaces," ACS Sustainable Chemistry and Engineering, vol. 8, no. 27, pp. 10027-10040, 2020.
[14]
D. M. de Carvalho et al., "Impact of birch xylan composition and structure on film formation and properties," Holzforschung, vol. 74, no. 2, pp. 184-196, 2020.
[15]
T. M. Budnyak et al., "Membrane-Filtered Kraft Lignin-Silica Hybrids as Bio-Based Sorbents for Cobalt(II) Ion Recycling," ACS Omega, vol. 5, no. 19, pp. 10847-10856, 2020.
[16]
I. V. Pylypchuk et al., "New Insight into the Surface Structure of Lignin Nanoparticles Revealed by H-1 Liquid-State NMR Spectroscopy," ACS Sustainable Chemistry and Engineering, vol. 8, no. 36, pp. 13805-13812, 2020.
[18]
P. A. Lindén et al., "Stabilising mannose using sodium dithionite at alkaline conditions," Holzforschung, vol. 74, no. 2, pp. 131-140, 2020.
[19]
T. M. Budnyak et al., "Tailored Hydrophobic/Hydrophilic Lignin Coatings on Mesoporous Silica for Sustainable Cobalt(II) Recycling," ACS Sustainable Chemistry and Engineering, vol. 8, no. 43, pp. 16262-16273, 2020.
[20]
[21]
I. Dogaris, M. Lindström and G. Henriksson, "Critical parameters for tall oil separation I : The importance of the ratio of fatty acids to rosin acids," TAPPI Journal, vol. 18, no. 9, pp. 547-555, 2019.
[22]
V. Halysh et al., "Effect of oxidative treatment on composition and properties of sorbents prepared from sugarcane residues," Industrial crops and products (Print), vol. 139, 2019.
[24]
D. M. de Carvalho et al., "Impact of the chemical composition of cellulosic materials on the nanofibrillation process and nanopaper properties," Industrial crops and products (Print), vol. 127, pp. 203-211, 2019.
[25]
D. M. de Carvalho et al., "Improving the thermal stability of different types of xylan by acetylation," Carbohydrate Polymers, vol. 220, pp. 132-140, 2019.
[27]
C. Moser, G. Henriksson and M. Lindström, "Structural aspects on the manufacturing of cellulose nanofibers from wood pulp fibers," BioResources, vol. 14, no. 1, pp. 2269-2276, 2019.
[29]
C. Moser, G. Henriksson and M. Lindström, "Improved dispersibility of once-dried cellulose nanofibers in the presence of glycerol," Nordic Pulp & Paper Research Journal, vol. 33, no. 4, pp. 647-650, 2018.
[30]
S. Aminzadeh et al., "Membrane filtration of kraft lignin : Structural charactristics and antioxidant activity of the low-molecular-weight fraction," Industrial crops and products (Print), vol. 112, pp. 200-209, 2018.
[31]
T. M. Budnyak et al., "Methylene Blue dye sorption by hybrid materials from technical lignins," Journal of Environmental Chemical Engineering, vol. 6, no. 4, pp. 4997-5007, 2018.
[34]
V. Halysh et al., "Walnut shells as a potential low-cost lignocellulosic sorbent for dyes and metal ions," Cellulose, vol. 25, no. 8, pp. 4729-4742, 2018.
[35]
C. Moser et al., "Xyloglucan adsorption for measuring the specific surface area on various never-dried cellulose nanofibers," Nordic Pulp & Paper Research Journal, vol. 33, no. 2, pp. 186-193, 2018.
[36]
C. Moser et al., "Xyloglucan for estimating the surface area of cellulose fibers," Nordic Pulp & Paper Research Journal, vol. 33, no. 2, pp. 194-199, 2018.
[37]
Y. Zhao et al., "Cellulose Nanofibers from Softwood, Hardwood, and Tunicate : Preparation-Structure-Film Performance Interrelation," ACS Applied Materials and Interfaces, vol. 9, no. 15, pp. 13508-13519, 2017.
[38]
V. Galysh et al., "Impact of ferrocyanide salts on the thermo-oxidative degradation of lignocellulosic sorbents," Journal of thermal analysis and calorimetry (Print), vol. 128, no. 2, pp. 1019-1025, 2017.
[39]
D. Morais de Carvalho et al., "Isolation and characterization of acetylated glucuronoarabinoxylan from sugarcane bagasse and straw," Carbohydrate Polymers, vol. 156, pp. 223-234, 2017.
[41]
A. Martinez-Abad et al., "Regular Motifs in Xylan Modulate Molecular Flexibility and Interactions with Cellulose Surfaces," Plant Physiology, vol. 175, no. 4, pp. 1579-1592, 2017.
[42]
T. Mattsson et al., "The Development of a Wood-based Materials-biorefinery," BioResources, vol. 12, no. 4, pp. 9152-9182, 2017.
[43]
H. Rahman et al., "The effect of increased pulp yield using additives in the softwood kraft cook on the physical properties of low-grammage handsheets," Nordic Pulp & Paper Research Journal, vol. 32, no. 3, pp. 317-323, 2017.
[44]
V. L. Vegunta et al., "Thermal and Alkali Stability of Sodium Dithionite Studied Using ATR-FTIR Spectroscopy," BioResources, vol. 12, no. 2, pp. 2496-2506, 2017.
[46]
M. L. Rabinovich et al., "Carbon adsorbents from industrial hydrolysis lignin : The USSR/Eastern European experience and its importance for modern biorefineries," Renewable & sustainable energy reviews, vol. 57, pp. 1008-1024, 2016.
[47]
[48]
C. Moser, G. Henriksson and M. E. Lindström, "Specific surface area increase during cellulose nanofiber manufacturing related to energy input," BioResources, vol. 11, no. 3, pp. 7124-7132, 2016.
[49]
[50]
S. Azhar et al., "Extraction of hemicelluloses from fiberized spruce wood," Carbohydrate Polymers, vol. 117, pp. 19-24, 2015.
[52]
L. Salmen and M. Lindström, "Improved pulp yield and strength by retained glucomannans in kraft pulping of softwood," Nordic Pulp & Paper Research Journal, vol. 30, no. 4, pp. 584-590, 2015.
[54]
Y. Wang et al., "Stabilisation of polysaccharides during alkaline pretreatment of wood combined with enzyme-supported extractions in a biorefinery," Journal of wood chemistry and technology, vol. 35, no. 2, pp. 91-101, 2015.
[55]
C. Moser, M. E. Lindström and G. Henriksson, "Toward Industrially Feasible Methods for Following the Process of Manufacturing Cellulose Nanofibers," BioResources, vol. 10, no. 2, pp. 2360-2375, 2015.
[56]
[57]
Y. Wang, M. E. Lindström and G. Henriksson, "Increased Degradability of Cellulose by Dissolution in Cold Alkali," BioResources, vol. 9, no. 4, pp. 7566-7578, 2014.
[58]
X. Du, J. Li and M. Lindström, "Modification of industrial softwood kraft lignin using Mannich reaction with and without phenolation pretreatment," Industrial crops and products (Print), vol. 52, pp. 729-735, 2014.
[60]
O. Sevasyanova et al., "Tailoring the Molecular and Thermo-Mechanical Properties of Kraft Lignin by Ultrafiltration," Journal of Applied Polymer Science, vol. 131, no. 18, pp. 9505-9515, 2014.
[61]
H. Zhu et al., "Technical soda lignin dissolved in urea as an environmental friendly binder in wood fiberboard," Journal of Adhesion Science and Technology, vol. 28, no. 5, pp. 490-498, 2014.
[62]
R. B. Lima et al., "Direct lignin fuel cell for power generation," RSC Advances, vol. 3, no. 15, pp. 5083-5089, 2013.
[63]
Y. Hou et al., "Feasibility of monomer aromatic substances as calibration standards for lignin quantitative analyses in Pyrolysis-GCMS," Journal of Analytical and Applied Pyrolysis, vol. 101, pp. 232-237, 2013.
[64]
M. Helander et al., "Fractionation of Technical Lignin : Molecular Mass and pH Effects," BioResources, vol. 8, no. 2, pp. 2270-2282, 2013.
[65]
H. Wedin et al., "Impact of extended-impregnation cooking on the xylan structure in Eucalyptus urograndis kraft pulps," Nordic Pulp & Paper Research Journal, vol. 28, no. 4, pp. 498-505, 2013.
[66]
Y. Zhang et al., "Spruce glucomannan : Preparation, structural characteristics and basic film forming ability," Nordic Pulp & Paper Research Journal, vol. 28, no. 3, pp. 323-330, 2013.
[67]
H. Zhu et al., "A novel nano cellulose preparation method and size fraction by cross flow ultra- filtration," Current organic chemistry, vol. 16, no. 16, pp. 1871-1875, 2012.
[69]
H. Wedin et al., "Further insights into extended-impregnation kraft cooking of birch," Nordic Pulp & Paper Research Journal, vol. 27, no. 5, pp. 890-899, 2012.
[71]
K. Jedvert et al., "Mild steam explosion : A way to activate wood for enzymatic treatment, chemical pulping and biorefinery processes," Nordic Pulp & Paper Research Journal, vol. 27, no. 5, pp. 828-835, 2012.
[72]
K. Jedvert et al., "Mild steam explosion and chemical pre-treatment of Norway spruce," BioResources, vol. 7, no. 2, pp. 2051-2074, 2012.
[73]
S. Azhar et al., "Extraction of polymers from enzyme-treated softwood," BioResources, vol. 6, no. 4, pp. 4606-4614, 2011.
[74]
Y. Wang, M. E. Lindström and G. Henriksson, "Mild alkaline treatment activates spruce wood for enzymatic processing : A possible stage in bio-refinery processes," BioResources, vol. 6, no. 3, pp. 2425-2434, 2011.
[77]
H. Wedin, M. Lindström and M. Ragnar, "Extended impregnation in the kraft cook : an approach to improve the overall yield in eucalypt kraft pulping," Nordic Pulp & Paper Research Journal, vol. 25, no. 1, pp. 7-14, 2010.
[79]
S. Antonsson, K. Karlström and M. E. Lindström, "Applying a novel cooking technique to produce high kappa number pulps : the effects on physical properties," Nordic Pulp & Paper Research Journal, vol. 24, no. 4, pp. 415-420, 2009.
[80]
S. Antonsson et al., "Comparison of the physical properties between hardwood and softwood pulps," Nordic Pulp & Paper Research Journal, vol. 24, no. 4, pp. 409-414, 2009.
[81]
S. Danielsson and M. Lindström, "The effect of black liquor exchange in the kraft cook on the tensile properties of Eucalyptus urograndis kraft pulp," O Papel cellulose, papel, impressão, vol. 70, no. 4, pp. 35-50, 2009.
[82]
S. Antonsson, G. Henriksson and M. E. Lindström, "The influence of lignin and xylan on some kraftliner pulp properties," Nordic Pulp & Paper Research Journal, vol. 24, no. 4, pp. 403-408, 2009.
[83]
S. Antonsson, G. Henriksson and M. E. Lindström, "Adding lignin derivatives to decrease the effect of mechano-sorptive creep in linerboard," Appita journal, vol. 61, no. 6, pp. 468-471, 2008.
[84]
H. Nilsson et al., "Bark Suberin as a Renewable Source of Long-Chain omega-Hydroxyalkanoic Acids," Macromolecular Symposia, vol. 272, no. 1, pp. 104-106, 2008.
[85]
S. Antonsson et al., "Low Mw-lignin fractions together with vegetable oils as available oligomers for novel paper-coating applications as hydrophobic barrier," Industrial crops and products (Print), vol. 27, no. 1, pp. 98-103, 2008.
[86]
J. Li et al., "An improved methodology for the quantification of uronic acid units in xylans and other polysaccharides," Carbohydrate Research, vol. 342, no. 11, pp. 1442-1449, 2007.
[87]
E. Brännvall et al., "Fibre surface modifications of market pulp by consecutive treatments with cationic and anionic starch," Nordic Pulp & Paper Research Journal, vol. 22, no. 2, pp. 244-248, 2007.
[88]
G. Elegir et al., "Laccase-initiated cross-linking of lignocellulose fibres using a ultra-filtered lignin isolated from kraft black liquor," Applied Microbiology and Biotechnology, vol. 77, no. 4, pp. 809-817, 2007.
[89]
A. Olsson, M. Lindström and T. Iversen, "Lipase-catalyzed synthesis of an epoxy-functionalized polyester from the suberin monomer cis-9,10-epoxy-18-hydroxyoctadecanoic acid," Biomacromolecules, vol. 8, no. 2, pp. 757-760, 2007.
[90]
G. Simeonova et al., "On the effect of a xylanase post-treatment as a means of reducing the yellowing of bleached hardwood kraft pulp," Nordic Pulp & Paper Research Journal, vol. 22, no. 2, pp. 172-176, 2007.
[91]
E. Brännvall and M. Lindström, "The hemicellulose composition of pulp fibers and their ability to endure mechanical treatment," TAPPI Journal, vol. 6, no. 10, pp. 19-24, 2007.
[92]
E. Brännvall and M. Lindström, "The impact of ionic strength during kraft cooking on the strength properties of softwood kraft pulp," Appita journal, vol. 60, no. 1, pp. 60-64, 2007.
[93]
R. Sjödahl, M. Ek and M. E. Lindström, "The influence of industrial black liquor on the delignification rate in the kraft cooking," Journal of Pulp and Paper Science (JPPS), vol. 33, no. 4, pp. 240-245, 2007.
[94]
E. Brännvall and M. Lindström, "A study on the difference in strength between industrially and laboratory-cooked pulp," Nordic pulp and paper research journal, vol. 21, no. 2, pp. 222-226, 2006.
[95]
E. Brännvall and M. Lindström, "A study on the difference industrially and in tensile strength between laboratory-cooked pulp," Nordic Pulp & Paper Research Journal, vol. 21, no. 2, pp. 222-226, 2006.
[96]
R. Sjödahl, P. Axelsson and M. E. Lindström, "Addition of Dissolved Wood Components to Improve the Delignification Rate and Pulp Yield in Hardwood Kraft Pulping," Appita journal, vol. 59, no. 4, pp. 317-320, 2006.
[97]
S. Danielsson, K. Kisara and M. Lindström, "Kinetic study of Hexenuronic and Methylglucuronic acid reactions in pulp and in dissolved xylan during kraft pulping of hardwood," Industrial & Engineering Chemistry Research, vol. 45, no. 7, pp. 2174-2178, 2006.
[98]
S. Danielsson and M. Lindström, "Influence of birch xylan adsorption during kraft cooking on softwood pulp strength," Nordic Pulp & Paper Research Journal, vol. 20, no. 4, pp. 436-441, 2005.
[100]
H. Wedin, M. Lindström and M. Ragnar, "On the role of carbohydrates in oxygen delignification," Nordic Pulp & Paper Research Journal, vol. 20, no. 4, pp. 448-452, 2005.
[101]
M. Ragnar and M. Lindström, "A comparison of emerging technologies : hot chlorine dioxide bleaching versus hot acid treatment," Paperi ja puu, vol. 86, no. 1, pp. 39-44, 2004.
[102]
P. Ekevåg et al., "Addition of carboxymethylcellulose to the kraft cook," Nordic Pulp & Paper Research Journal, vol. 19, no. 2, pp. 200-207, 2004.
[103]
L. Lundquist et al., "Alkali-methanol-anthraquinone pulping of Miscanthus x giganteus for thermoplastic composite reinforcement," Journal of Applied Polymer Science, vol. 92, no. 4, pp. 2132-2143, 2004.
[104]
P. Axelsson, G. Gellerstedt and M. Lindström, "Condensation reactions of lignin during birch Kraft pulping as studied by thioacidolysis," Journal of Pulp and Paper Science (JPPS), vol. 30, no. 12, pp. 317-322, 2004.
[106]
F. Berthold et al., "Dissolution of softwood kraft pulps by direct derivatization in lithium chloride/N,N-dimethylacetamide," Journal of Applied Polymer Science, vol. 94, no. 2, pp. 424-431, 2004.
[107]
P. Axelsson and M. Lindström, "Influence of the conditions during birch kraft cooking on unbleached brightness, and on ECF- and TCF-bleachability," Nordic Pulp & Paper Research Journal, vol. 19, no. 3, pp. 309-317, 2004.
[108]
C. Gustavsson et al., "On the nature of residual lignin," Cellulose chem. techmol., vol. 35, pp. 321-331, 2004.
[109]
R. Sjödahl, M. Ek and M. E. Lindström, "The Effect of Sodium Ion Concentration and Dissolved Wood Components in the Kraft Cook of Softwood," Nordic Pulp & Paper Research Journal, vol. 19, no. 3, pp. 325-329, 2004.
[110]
S. Antonsson et al., "A comparative study of the impact of the cooking process on oxygen delignification," Nordic Pulp & Paper Research Journal, vol. 18, no. 4, pp. 388-394, 2003.
[111]
M. Christiernin et al., "The effects of xyloglucan on the properties of paper made from bleached kraft pulp," Nordic Pulp & Paper Research Journal, vol. 18, no. 2, pp. 182-187, 2003.
[112]
E. A. K. Pettersson, M. Ragnar and M. Lindström, "Kraft cooking characteristics and hexenuronic acid concentration of pulps from Eucalypt and other hardwood species," Nordic Pulp & Paper Research Journal, vol. 17, no. 3, pp. 222-227, 2002.
[113]
I. Gonzalo Epelde, C. T. Lindgren and M. E. Lindström, "Kinetics of wheat straw delignification in soda and kraft pulping," Journal of wood chemistry and technology, vol. 18, no. 1, pp. 69-82, 1998.
[114]
C. Gustavsson, C. Lindgren and M. E. Lindström, "A Study of How the Amount of Residual Phase Lignin in Kraft Cooking Depends upon the Conditions in the Cook," Nordic Pulp Paper Research Journal, vol. 12, no. 4, pp. 225, 1997.
[115]
C. T. Lindgren and M. E. Lindström, "Kinetics of the bulk and residual delignification in kraft pulping of birch and factors affecting the amount of residual phase lignin," Nordic Pulp and Paper Research Journal, vol. 12, no. 2, pp. 124-127, 1997.
[116]
C. T. Lindgren and M. E. Lindström, "The kinetics of residual delignification and factors affecting the amount of residual lignin during kraft pulping," Journal of Pulp and Paper Science (JPPS), vol. 22, no. 8, pp. J290-J295, 1996.
[117]
M. E. Lindström and A. Teder, "The Effect of Polysulfide Pretreatment when Kraft Pulping to Very Low Kappa Numbers," Nordic Pulp Paper Research Journal, vol. 10, no. 1, pp. 8, 1995.
[118]
C. Lindgren and M. E. Lindström, "Thermal Decomposition of Inorganic Polysulfides at Kraft Cooking Conditions," Nordic Pulp Paper Research Journal, vol. 10, no. 1, pp. 41, 1995.

Conference papers

[119]
[120]
C. Mair, M. Lindström and D. Söderberg, "Control of the porous structure of paper in a continuous process," in International Conference on Nanotechnology for Renewable Materials 2017, 2017.
[121]
T. Mattsson et al., "Towards a wood based material biorefinery - A demonstrator," in 6th Nordic Wood Biorefinery Conference, NWBC 2015, 2015, pp. 92-101.
[122]
Y. Zhao et al., "High performance tunicate cellulose composite films with glucomannan," in The 17th International Symposium on Wood, Fibre and Pulping Chemistry, 2013, pp. 1-12.
[123]
Y. Zhang et al., "Reactivity investigation of glucomannan from spruce," in The 17th International Symposium on Wood, Fibre and Pulping Chemistry, 2013, pp. 1-8.
[124]
Y. Wang, M. E. Lindström and G. Henriksson, "Alkaline pretreatment to open the wood structure for enzymatic modification," in Proceedings of the 16th International Symposium of wood, fiber and pulp chemistry, 2011, pp. 1041-1044.
[125]
[126]
S. Azhar et al., "Chemoenzymatic separation of softwood polymers," in Proceedings of  the 16th international symposium of wood, fiber and pulp chemistry, 2011, pp. 932-936.
[127]
R. B. Lima et al., "Direct lignin fuel cell for power generation," in 16th International Symposium on Wood, Fiber and Pulping Chemistry : Proceedings, ISWFPC, 2011, pp. 257-262.
[128]
K. Jedvert et al., "EXTRACTION OF HEMI-CELLULOSES AFTER CHEMICAL PRETREATMENT COMBINED WITH MILD STEAM EXPLOSION," in 16TH INTERNATIONAL SYMPOSIUM ON WOOD, FIBER AND PULPING CHEMISTRY, PROCEEDINGS, VOLS I & II, 2011, pp. 867-871.
[129]
K. Jedvert et al., "Extraction of hemicelluloses after chemical pretreatment combined with mild steam explosion," in 16th International Symposium on Wood, Fiber and Pulping Chemistry - Proceedings, 2011, pp. 867-871.
[130]
X. Du, J. Li and M. E. Lindström, "Modification of lignin structure by amine group introduction," in Int. Symp. Wood, Fiber Pulping Chem. - Proc., ISWFPC, 2011, pp. 298-303.
[131]
Y. Zhang et al., "Spruce glucomannan; preparation, purification, characterization and derivatization," in Int. Symp. Wood, Fiber Pulping Chem. - Proc., ISWFPC, 2011, pp. 478-483.
[132]
G. Henriksson et al., "Ways to tailor-make xylan for kraft pulping," in Proceedings 16th International Symposium on Wood, Fiber and Pulping Chemistry, ISWFPC, 2011, pp. 596-599.
[133]
J. Li and M. E. Lindström, "An HPLC method for pentosans quantification in biomass, pulp and other biomass product," in The Second Workshop on Chemical Pulping Processes. Karlstad, Sweden. November 18-19, 2008, 2008.
[134]
H. Wedin, M. E. Lindström and M. Ragnar, "Inorganic chemistry in oxygen delignification : the effect of counter ion and ionic strength," in 14th International Symposium on Wood Fibre and Pulping Chemistry (ISWFPC), Durban, South Africa, June 25-28 2007, 2007.
[135]
K. Kisara, S. Danielsson and M. Lindstrom, "The possibility of controlling formation and cleavage reactions of HexA during kraft pulping," in 2006 TAPPI Engineering, Pulping and Environmental Conference Proceedings, 2006.
[136]
S. Antonsson, G. Henriksson and M. Lindström, "The utilization of lignin derivatives and radical coupling reaction to increase wet strength of kraftliner," in 6th international paper and coating chemistry symposium. Book of abstracts., 2006, pp. 55-55.
[137]
R. G. Sjödahl, S. Danielsson and M. E. Lindström, "Addition of wood model components to kraft cooking to better understand the improvement in delignification rate caused by dissolved wood components," in Appita Conference and Exhibition : 59th Appita Annual Conference and Exhibition: Incorporating the 13th ISWFPC (International Symposium on Wood, Fibre and Pulping Chemistry), Auckland, New Zealand, 16-19 May 2005: Proceedings, 2005, pp. 365-368.
[138]
S. Antonsson et al., "Biomimetic synthesis of suberin for new biomaterials," in Appita Annual Conference : Vol 2, 2005, pp. 561-564.
[139]
O. Sevastyanova, M. E. Lindström and G. Gellerstedt, "The influence of a bleaching sequence on the brightness stability of eucalyptus kraft pulp," in Appita Annual Conference, 2005, pp. 251-255.
[140]
S. Danielsson, A. Jacobs and M. E. Lindström, "Topochemical modification of fibres during kraft pulping," in Appita Annu. Conf., 2005, pp. 155-160.
[141]
R. G. Sjödahl, P. Axelsson and M. . E. Lindström, "Addition of dissolved wood components for improvement of delignification rate and pulp yield in hardwood Kraft pulping," in 2nd International Symposium on Technologies Of Pulping, Papermaking and Biotechnology on Fiber Plants, Proceedings, 2004, pp. 123-126.
[142]
R. Sjödahl, M. Lindström and M. Ek, "The influence of different cooking parameters on the bleachability of softwood kraft pulp.," in Proceedings 7th European Workshop on Lignocellulosics and Pulp, 2002.

Chapters in books

[143]
G. Henriksson et al., "Lignin Utilization," in Thermochemical conversion of biomass to liquid fuels and chemicals, M. Crocker Ed., : RSC Publishing, 2010, pp. 222-262.

Non-peer reviewed

Articles

[145]
J. Berglund et al., "Hydrogels of bacterial cellulose and wood hemicelluloses as a model of plant secondary cell walls," Abstracts of Papers of the American Chemical Society, vol. 257, 2019.
[147]
I. Dogaris, M. Lindström and G. Henriksson, "Study on tall oil solubility for improved resource recovery in chemical pulping of wood," Abstracts of Papers of the American Chemical Society, vol. 257, 2019.
[148]
A. Martinez-Abad et al., "Influence of the molecular structure of wood hemicelluloses on the recalcitrance of lignocellulosic biomass," Abstracts of Papers of the American Chemical Society, vol. 255, 2018.
[149]
G. Henriksson et al., "Non-cellulose wood polysaccharides - a need for a stricter structural and functional classification?," Abstracts of Papers of the American Chemical Society, vol. 255, 2018.
[151]
D. M. de Carvalho et al., "Chemical and structural characterization of xylans from sugarcane bagasse and sugarcane straw," Abstracts of Papers of the American Chemical Society, vol. 251, 2016.
[153]
S. Aminzadeh et al., "On the crossflow membrane fractionation of lignoboost kraft lignin : Characterization of low molecular weight fractions," Abstracts of Papers of the American Chemical Society, vol. 251, 2016.
[154]
M. Helander et al., "Parameters Affecting the Cross-flow Filtration of Dissolved LignoBoost Kraft Lignin," Journal of wood chemistry and technology, vol. 36, no. 1, pp. 1-8, 2015.
[155]
Y. Zhang et al., "Reactivity investigation of glucomannan from spruce," Abstracts of Papers of the American Chemical Society, vol. 247, no. 113-CELL, 2014.
[157]
S. Azhar et al., "Enhanced extraction of high-molecular-weight wood polymers with chemoenzymatic treatment," Abstracts of Papers of the American Chemical Society, vol. 243, 2012.
[158]
M. Helander et al., "Lignin for new materials - molar mass and pH effects," Abstracts of Papers of the American Chemical Society, vol. 243, 2012.
[159]
X. Du, J. Li and M. E. Lindström, "Modification of industrial kraft lignin by amination," Abstracts of Papers of the American Chemical Society, vol. 243, 2012.
[160]
Y. Zhang, J. Li and M. E. Lindström, "On renewable film made from spruce glucomannan," Abstracts of Papers of the American Chemical Society, vol. 243, 2012.
[161]
S. Danielsson, E. Brännvall and M. Lindström, "Xylan as a surface modifying agent in the kraft cook," Abstracts of Papers of the American Chemical Society, vol. 231, 2006.
[162]
M. Ragnar and M. E. Lindström, "Hot chlorine dioxide bleaching and hot acid treatment - A comment," Paperi ja puu, vol. 86, no. 3, pp. 174-174, 2004.

Conference papers

[163]
M. E. Lindström et al., "A genetic strategy for avoiding formation of hexenuronic acid in kraft pulping?," in 5th International Colloquium on Eucalyptus Pulp, May 9-12, 2011, Porto Seguro, BA Brazil, 2011.
[164]
H. Wedin, M. E. Lindström and M. Ragnar, "From simple theory to industrial application : extended impregnation kraft cooking," in 5th International Colloquium on Eucalyptus Pulp (ICEP), My 9-12, Porto Seguro, Brazil, 2011.
[165]
O. Sevastyanova et al., "Impact of bleaching sequence on the efficiency of final chlorine dioxide stage in ECF-type bleaching of eucalyptus kraft pulps," in 5th International Colloquium on Eucalyptus Pulp, ICEP, Porto Seguro, BA Brazil, 9.-12.5.2011, 2011.
[166]
O. Sevastyanova et al., "The final bleaching of eucalyptus kraft pulp with chlorine dioxide : what factors affecting its efficiency?," in International Pulp Bleaching Conference 2011 (IPBC), Portland, USA, October 4-5 2011, 2011.
[167]
H. Wedin et al., "The effect of extended impregnation kraft cooking and oxygen delignification on xylan structure," in 11th European Workshop on Lignocelluloses and Pulp (EWLP), 2010, pp. 113-117.
[168]
O. Sevastyanova, M. Lindström and G. Gellerstedt, "Influence of the bleaching sequence on the brightness stability of eucalyptus kraft pulp," in 3rd International Colloquium on Eucalyptus Pulp (ICEP). Belo Horizonte, Brazil. 4–7 March 2007, 2007.
[169]
H. Wedin, M. E. Lindström and M. Ragnar, "On the role of Xylan in Oxygen Delignification," in 3rd International Colloquium on Eucalyptus Pulp (ICEP), Belo Horizonte, Brazil, March 4-7 2007, 2007.

Theses

[170]
M. E. Lindström, "Some factors affecting the amount of residual phase lignin during kraft pulping," Doctoral thesis Stockholm : KTH, Trita-PMT, 1997:5, 1997.

Reports

[171]
I. Dogaris, M. Lindström and G. Henriksson, "Tall Oil Solubility in Industrial Liquors," Stokcholm, Energiforsk, 2019:282, 2019.

Other

[174]
S. Danielsson, P. Josefsson and M. Lindström, "Adsorption of hardwood black liquor xylan on cellulose," (Manuscript).
[184]

Patents

Patents

[188]
G. Henriksson and M. Lindström, "Process for the hydrolysis of cellulose," EP 2425024 (2013-01-30), 2010.
[193]
[197]
H. Dahllöf, E. Nilsson and M. Lindström, "An oxygen delignification study concerning storage of unwashed SW oxygen," fi 3693, 1998.
[198]
J. Engström et al., "Method and device for the continuous cooking of pulp," ca 2279283C (2008-08-26), 1998.
[200]
J. Engström et al., "Metodo e dispositivo para o cozimento continuo de pasta de papel," pt 909353 E (2001-05-09), 1998.
[201]
M. Lindström and C. Lindgren, "Cooking of pulp with high effective alkali concentration in the residual phase," us 5885414A (1999-03-23), 1997.
Latest sync with DiVA:
2024-07-14 04:05:05