## Contact

**KTH Royal Institute of Technology**

*SE-100 44 Stockholm Sweden +46 8 790 60 00*

[1]

T. Fischer *et al.*, "Micromechanical prediction of the elastic and plastic properties of sintered steels," *Materials Science & Engineering : A*, vol. 897, 2024.

[2]

P. Gupta *et al.*, "Layer-Resolved Mechanical Degradation of a Ni-Rich Positive Electrode," *Batteries*, vol. 9, no. 12, pp. 575, 2023.

[3]

A. H.S. Iyer *et al.*, "Measuring microscale mechanical properties of PVdF binder phase and the binder-particle interface using micromechanical testing," *Materials Science & Engineering : A*, vol. 881, 2023.

[4]

P. Gupta and P. Gudmundson, "Modeling of local electrode stresses and pressures in lithium-ion battery packs using three-dimensional homogenization," *Journal of Power Sources*, vol. 582, 2023.

[5]

I. B. Ucel and P. Gudmundson, "A statistical RVE model for effective mechanical properties and contact forces in lithium-ion porous electrodes," *International Journal of Solids and Structures*, vol. 244-245, 2022.

[6]

P. Croné, P. Gudmundson and J. Faleskog, "Analytical prediction of yield stress and strain hardening in a strain gradient plasticity material reinforced by small elastic particles," *International journal of plasticity*, vol. 151, pp. 103200-103200, 2022.

[7]

P. Croné *et al.*, "Continuum plasticity modelling of work hardening for precipitation-hardened martensitic steel guided by atom probe tomography," *Materials & design*, vol. 215, 2022.

[8]

I. B. Ucel, P. Gupta and P. Gudmundson, "Experimental determination of the constitutive properties of a graphite anode layer in lithium-ion batteries using a bending test method," *Journal of Energy Storage*, vol. 46, pp. 103845-103845, 2022.

[9]

V. Gaisina *et al.*, "On the mechanical behavior of sintered Astaloy-85Mo: Influence of porosity and sinter conditions," *Materials Science & Engineering : A*, vol. 841, pp. 143052-143052, 2022.

[10]

P. Croné, P. Gudmundson and J. Faleskog, "Strain gradient plasticity modelling of cyclic loading in dispersion hardened materials," *European journal of mechanics. A, Solids*, vol. 96, 2022.

[11]

P. Gupta and P. Gudmundson, "A multi-scale model for simulation of electrochemically induced stresses onscales of active particles, electrode layers, and battery level inlithium-ion batteries," *Journal of Power Sources*, vol. 511, no. 230465, 2021.

[12]

P. Gudmundson and P.-L. Larsson, "An analytic model for effective mechanical properties and local contact stresses in lithium-ion porous electrodes," *Extreme Mechanics Letters*, vol. 42, 2021.

[13]

J. Faleskog and P. Gudmundson, "Analytical predictions of yield stress of a strain gradient plasticitymaterial reinforced by small elastic particles," *Journal of the mechanics and physics of solids*, vol. 157, no. 104623, pp. 104623, 2021.

[14]

P. Gupta *et al.*, "Characterization of the Constitutive Behavior of a Cathode ActiveLayer in Lithium-Ion Batteries Using a Bending Test Method," *Experimental mechanics*, vol. 60, pp. 847-860, 2020.

[15]

P. Gudmundson and C. F. O. Dahlberg, "Isotropic strain gradient plasticity model based on self-energies of dislocations and the Taylor model for plastic dissipation," *International journal of plasticity*, vol. 121, pp. 1-20, 2019.

[16]

A. Mussa *et al.*, "Inhomogeneous active layer contact loss in a cycled prismatic lithium-ion cell caused by the jelly-roll curvature," *Journal of Energy Storage*, vol. 20, pp. 213-217, 2018.

[17]

T. C. Gasser, P. Gudmundson and G. Dohr, "Failure mechanisms of ventricular tissue due to deep penetration," *Journal of Biomechanics*, vol. 42, no. 5, pp. 626-633, 2009.

[18]

P. Fredriksson, P. Gudmundson and L. P. Mikkelsen, "Finite element implementation and numerical issues of strain gradient plasticity with application to metal matrix composites," *International Journal of Solids and Structures*, vol. 46, no. 22-23, pp. 3977-3987, 2009.

[19]

J. Strömbro and P. Gudmundson, "An anisotropic fibre-network model for mechano-sorptive creep in paper," *International Journal of Solids and Structures*, vol. 45, no. 22-23, pp. 5765-5787, 2008.

[20]

C. F. O. Dahlberg and P. Gudmundsson, "Hardening and softening mechanisms at decreasing microstructural length scales," *Philosophical Magazine*, vol. 88, no. 30-32, pp. 3513-3525, 2008.

[21]

J. Strömbro and P. Gudmundson, "Mechano-sorptive creep under compressive loading : a micromechanical model," *International Journal of Solids and Structures*, vol. 45, no. 9, pp. 2420-2450, 2008.

[22]

P. Fredriksson and P. Gudmundson, "Competition between interface and bulk dominated plastic deformation in strain gradient plasticity," *Modelling and Simulation in Materials Science and Engineering*, vol. 15, no. 1, pp. S61-S69, 2007.

[23]

P. Fredriksson and P. Gudmundson, "Modelling of the interface between a thin film and a substrate within a strain gradient plasticity framework," *Journal of the mechanics and physics of solids*, vol. 55, no. 5, pp. 939-955, 2007.

[24]

J. Agde Tjernlund, K. Gamstedt and P. Gudmundson, "Length-scale effects on damage development in tensile loading of glass-sphere filled epoxy," *International Journal of Solids and Structures*, vol. 43, no. 24, pp. 7337-7357, 2006.

[25]

P. Gudmundson, "Modelling of length scale effects in viscoelastic materials," *European journal of mechanics. A, Solids*, vol. 25, no. 3, pp. 379-388, 2006.

[26]

J. Alfthan and P. Gudmundson, "Linear constitutive model for mechano-sorptive creep in paper," *International Journal of Solids and Structures*, vol. 42, no. 24-25, pp. 6261-6276, 2005.

[27]

L. Olasz and P. Gudmundson, "Prediction of residual stresses in cross-linked polyethylene cable insulation," *Polymer Engineering and Science*, vol. 45, no. 8, pp. 1132-1139, 2005.

[28]

P. Fredriksson and P. Gudmundson, "Size-dependent yield strength and surface energies of thin films," *Materials Science & Engineering : A*, vol. 400-401, no. 1-2 SUPPL., pp. 448-450, 2005.

[29]

P. Fredriksson and P. Gudmundson, "Size-dependent yield strength of thin films," *International journal of plasticity*, vol. 21, no. 9, pp. 1834-1854, 2005.

[30]

L. Olasz and P. Gudmundson, "Viscoelastic model of cross-linked polyethylene including effects of temperature and crystallinity," *Mechanics of time-dependant materials*, vol. 9, no. 4, pp. 225-246, 2005.

[31]

P. Gudmundson, "A unified treatment of strain gradient plasticity," *Journal of the mechanics and physics of solids*, vol. 52, no. 6, pp. 1379-1406, 2004.

[32]

M. Nygårds and P. Gudmundson, "Numerical investigation of the effect of non-local plasticity on surface roughening in metals," *European journal of mechanics. A, Solids*, vol. 23, no. 5, pp. 753-762, 2004.

[33]

J. Alfthan, P. Gudmundson and S. Östlund, "A micromechanical model for mechanosorptive creep in paper," *Journal of Pulp and Paper Science (JPPS)*, vol. 28, no. 3, pp. 98-104, 2002.

[34]

M. Nygårds and P. Gudmundson, "Micromechanical modeling of ferritic/pearlitic steels," *Materials Science & Engineering : A*, vol. 325, no. 1-2, pp. 435-443, 2002.

[35]

P. Gudmundson and A. Wikström, "Stresses in thin films and interconnect lines," *Microelectronic Engineering*, vol. 60, no. 1-2, pp. 17-29, 2002.

[36]

M. Nygårds and P. Gudmundson, "Three-dimensional periodic Voronoi grain models and micromechanical FE-simulations of a two-phase steel," *Computational materials science*, vol. 24, no. 4, pp. 513-519, 2002.

[37]

M. Johnson and P. Gudmundson, "Experimental and theoretical characterization of acoustic emission transients in composite laminates," *Composites Science And Technology*, vol. 61, no. 10, pp. 1367-1378, 2001.

[38]

A. L. Nordström, P. Gudmundson and L. A. Carlsson, "Influence of gravity on curl of horizontal paper sheets," *TAPPI Journal*, vol. 84, no. 5, pp. 73-73, 2001.

[39]

M. Nygårds and P. Gudmundson, "Role of colonies of large elliptical grains in high-strength steel," *Advanced Engineering Materials*, vol. 3, no. 1-2, pp. 58-62, 2001.

[40]

A. Wikström and P. Gudmundson, "Thermal deformation of initially curved substrates coated by thin inhomogeneous layers," *Journal of applied mechanics*, vol. 68, no. 2, pp. 298-303, 2001.

[41]

M. Johnson and P. Gudmundson, "Broad-band transient recording and characterization of acoustic emission events in composite laminates," *Composites Science And Technology*, vol. 60, no. 15, pp. 2803-2818, 2000.

[42]

P. Gudmundson and J. Alpman, "Initiation and growth criteria for transverse matrix cracks in composite laminates," *Composites Science And Technology*, vol. 60, no. 2, pp. 185-195, 2000.

[43]

M. Åberg and P. Gudmundson, "Micromechanical modeling of transient waves from matrix cracking and fiber fracture in laminated beams," *International Journal of Solids and Structures*, vol. 37, no. 30, pp. 4083-4102, 2000.

[44]

P. Gudmundson, "Micromechanically based constitutive models for damage evolution in composite laminates," *International journal of damage mechanics*, vol. 9, no. 1, pp. 29-39, 2000.

[45]

A. Wikström and P. Gudmundson, "Stresses in passivated lines from curvature measurements," *Acta Materialia*, vol. 48, no. 10, pp. 2429-2434, 2000.

[46]

P. Gudmundson, "Acoustic emission and dynamic energy release rate for steady growth of a tunneling crack in a plate in tension," *Journal of the mechanics and physics of solids*, vol. 47, no. 10, pp. 2057-2074, 1999.

[47]

A. Wikström, P. Gudmundson and S. Suresh, "Analysis of average thermal stresses in passivated metal interconnects," *Journal of Applied Physics*, vol. 86, no. 11, pp. 6088-6095, 1999.

[48]

E. Adolfsson and P. Gudmundson, "Matrix crack initiation and progression in composite laminates subjected to bending and extension," *International Journal of Solids and Structures*, vol. 36, no. 21, pp. 3131-3169, 1999.

[49]

J.-E. Lundgren and P. Gudmundson, "Moisture absorption in glass-fibre/epoxy laminates with transverse matrix cracks," *Composites Science And Technology*, vol. 59, no. 13, pp. 1983-1991, 1999.

[50]

A. Gouldstone *et al.*, "Onset of plastic yielding in thin metal lines deposited on substrates," *Scripta Materialia*, vol. 41, no. 3, pp. 297-304, 1999.

[51]

A. Wikström, P. Gudmundson and S. Suresh, "Thermoelastic analysis of periodic thin lines deposited on a substrate," *Journal of the mechanics and physics of solids*, vol. 47, no. 5, pp. 1113-1130, 1999.

[52]

J.-E. Lundgren and P. Gudmundson, "A model for moisture absorption in cross-ply composite laminates with matrix cracks," *Journal of composite materials*, vol. 32, no. 24, pp. 2226-2253, 1998.

[53]

M. Åberg and P. Gudmundson, "Dispersion of waves in composite laminates with transverse matrix cracks, finite element and plate theory computations," *Journal of applied mechanics*, vol. 65, no. 3, pp. 588-595, 1998.

[54]

A. Nordström, P. Gudmundson and L. A. Carlsson, "Influence of sheet dimensions on curl of paper," *Journal of Pulp and Paper Science (JPPS)*, vol. 24, no. 1, pp. 18-25, 1998.

[55]

M. Åberg and P. Gudmundson, "The usage of standard finite element codes for computation of dispersion relations in materials with periodic microstructure," *Journal of the Acoustical Society of America*, vol. 102, no. 4, pp. 2007-2013, 1997.

[56]

E. Adolfsson and P. Gudmundson, "Thermoelastic properties in combined bending and extension of thin composite laminates with transverse matrix cracks," *International Journal of Solids and Structures*, vol. 34, no. 16, pp. 2035-2060, 1997.

[57]

L. E. Asp, L. A. Berglund and P. Gudmundson, "Effects of a composite-like stress state on the fracture of epoxies," *Composites Science And Technology*, vol. 53, no. 1, pp. 27-37, 1995.

[58]

E. Adolfsson and P. Gudmundson, "Matrix crack induced stiffness reductions in [(0(m)/90(n)/+theta(p)/-theta(q))(s)](m) composite laminates," *Composites Engineering*, vol. 5, no. 1, pp. 107-123, 1995.

[59]

P. Gudmundson and W. Zang, "An analytic model for thermoelastic properties of composite laminates containing transverse matrix cracks," *International Journal of Solids and Structures*, vol. 30, no. 23, pp. 3211-3231, 1993.

[60]

W. Zang and P. Gudmundson, "Damage Evolution and Thermoelastic Properties of Composite Laminates," *International journal of damage mechanics*, vol. 2, pp. 290-308, 1993.

[61]

P. Gudmundson and W. Zang, "Thermoelastic properties of microcracked composite laminates," *Mechanics of composite materials*, vol. 29, no. 2, pp. 107-114, 1993.

[62]

P. Gudmundson and S. Östlund, "First Order Analysis of Stiffness Reduction Due to Matrix Cracking.," *Journal of composite materials*, vol. 26, no. 7, pp. 1009-1030, 1992.

[63]

W. Zang and P. Gudmundson, "Kinked cracks in bonded half-planes modeled by an integral equation method," *International Journal of Fracture*, vol. 54, no. 1, pp. 65-78, 1992.

[64]

P. Gudmundson and S. Östlund, "Numerical verification of a procedure for calculation of elastic-constants in microcracking composite laminates.," *Journal of composite materials*, vol. 26, no. 17, pp. 2480-2492, 1992.

[65]

S. Östlund and P. Gudmundson, "Numerical-Analysis Of Matrix-Crack-Induced Delaminations In [+/-55-Degrees] Gfrp Laminates.," *COMPOSITES ENGINEERING 2*, vol. 2, no. 3, pp. 161-175, 1992.

[66]

P. Gudmundson and S. Östlund, "Prediction Of Thermoelastic Properties Of Composite Laminates With Matrix Cracks.," *Composites Science And Technology*, vol. 44, no. 2, pp. 95-105, 1992.

[67]

J. Thesken and P. Gudmundson, "Application Of A Moving Variable Order Singular Element To Dynamic Fracture-Mechanics.," *International Journal of Fracture*, vol. 52, no. 1, pp. 47-65, 1991.

[68]

W. Zang and P. Gudmundson, "Frictional Contact Problems Of Kinked Cracks Modeled By A Boundary Integral Method," *International Journal for Numerical Methods in Engineering*, vol. 31, no. 3, pp. 427-446, 1991.

[69]

W. Zang and P. Gudmundson, "Kinked Cracks In An Anisotropic Plane Modeled By An Integral-Equation Method.," *International Journal of Solids and Structures*, vol. 27, no. 14, pp. 1855-1865, 1991.

[70]

A. E. Giannakopoulos and P. Gudmundson, "The Stresses Around A Partly Microcracked Hole In Certain Ceramic Materials Under Internal-Pressure.," *International Journal of Solids and Structures*, vol. 28, no. 3, pp. 329-339, 1991.

[71]

P. Gudmundson, "Anisotropic microcrack nucleation in brittle materials," *Journal of the mechanics and physics of solids*, vol. 38, no. 4, pp. 531-551, 1990.

[72]

W. Zang and P. Gudmundson, "Contact Problems Of Kinked Cracks Modeled By A Boundary Integral Method," *International Journal for Numerical Methods in Engineering*, vol. 29, no. 4, pp. 847-860, 1990.

[73]

P. Gudmundson and S. Östlund, "Stress Singularity At The Free-Surface Of A Dynamically Growing Crack.," *Journal of applied mechanics*, vol. 57, no. 1, pp. 112-116, 1990.

[74]

W. Zang and P. Gudmundson, "An Integral-Equation Method For Piece-Wise Smooth Cracks In An Elastic Half-Plane.," *Engineering Fracture Mechanics*, vol. 32, no. 6, pp. 889-897, 1989.

[75]

P. Gudmundson, "On The Accuracy Of The Harmonic-Balance Method Concerning Vibrations Of Beams With Nonlinear Supports.," *Archive of applied mechanics (1991)*, vol. 59, no. 5, pp. 333-344, 1989.

[76]

W. Zang and P. Gudmundson, "A Boundary Integral Method For Internal Piece-Wise Smooth Crack Problems," *International Journal of Fracture*, vol. 38, no. 4, pp. 275-294, 1988.

[77]

S. Östlund and P. Gudmundson, "Asymptotic crack tip fields for dynamic fracture of linear strain-hardening solids," *International Journal of Solids and Structures*, vol. 24, no. 11, pp. 1141-1158, 1988.

[78]

J. C. Thesken and P. Gudmundson, "Application of a variable order singular element to dynamic fracture problems," *Computational Mechanics*, vol. 2, pp. 307-316, 1987.

[79]

S. Östlund and P. Gudmundson, "The Application Of Moving Finite-Elements For The Study Of Crack-Propagation In Linear Elastic Solids.," *Computers & structures*, vol. 25, no. 5, pp. 765-774, 1987.

[80]

P. Gudmundson and C. Wüthrich, "Die Werkstoffdämpfung von Stählen bei hohen Dehnungsamplituden," *Materialwissenschaft und Werkstofftechnik*, vol. 17, no. 8, pp. 286-292, 1986.

[81]

P. Gudmundson, "The dynamic behaviour of slender structures with cross-sectional cracks," *Journal of the mechanics and physics of solids*, vol. 31, no. 4, pp. 329-345, 1983.

[82]

P. Gudmundson, "Tuning of turbine blades : a theoretical approach.," *Journal of engineering for power*, vol. 105, no. 2, pp. 249-255, 1983.

[83]

W. Hoffelner and P. Gudmundson, "A fracture mechanics analysis of ultrasonic fatigue," *Engineering Fracture Mechanics*, vol. 16, no. 3, pp. 365-371, 1982.

[84]

P. Gudmundson, "Eigenfrequency changes of structures due to cracks, notches or other geometrical changes," *Journal of the mechanics and physics of solids*, vol. 30, no. 5, pp. 339-353, 1982.

[85]

M. Wittmer *et al.*, "Mechanical properties of liquid-phase-bonded copper-ceramic substrates.," *Journal of The American Ceramic Society*, vol. 65, no. 3, pp. 149-153, 1982.

[86]

V. Gaisina *et al.*, "An experimental investigation of the mechanical behavior of sintered Astaloy™ 85 Mo," in *Proceedings - Euro PM2020 Congress and Exhibition*, 2020.

[87]

P. Gudmundson and C. F. O. Dahlberg, "Dislocation based strain gradient plasticity model for prediction of length scale dependent initial yield strength," in *6th International Conference on Material Modelling (ICCM6)*, 2019.

[88]

P. Gudmundson, "Strain gradient plasticity model based on dislocation mechanics," in *invited lecture, Computational Modelling of Complex Materials Across the Scales (CMCS 2019), Glasgow, United Kingdom, October 1-4, 2019*, 2019.

[89]

P. Gudmundson and C. F. O. Dahlberg, "Physically based strain gradient plasticity model for length scale dependent yield strength," in *9th International Conference on Multiscale Materials Modeling (MMM2018), Osaka, Japan, October 28- November 2, 2018*, 2018.

[90]

P. Gudmundson, "Foreword (President, KTH)," in *Understanding the Geological and Medical Interface of Arsenic, As 2012 - 4th International Congress: Arsenic in the Environment*, 2012, pp. xxi-xxii.

[91]

P. Gudmundson, "Foreword (President, KTH)," in *Arsenic in Geosphere and Human Diseases, As 2010 - 3rd International Congress: Arsenic in the Environment*, 2010, pp. xxv-xxvi.

[92]

J. A. Tjernlund, E. K. Gamstedt and P. Gudmundson, "An experimental investigation of the relationship between molecular structure and length scales in inelastic deformation of an amorphous thermoplastic," in *IUTAM Symposium on Size Effects on Material and Structural Behavior at Micron- and Nano-Scales*, 2006, pp. 143-150.

[93]

P. Fredriksson and P. Gudmundson, "FE-modelling of interface conditions within a strain gradient plasticity theory," in *6th European Solid Mechanics Conference, 8 August 2006 – 1 September 2006, Budapest, Hungary*, 2006.

[94]

E. Bonnaud and P. Gudmundson, "Lead-Free Solder Cyclic Plasticity Characterization for Drop Test Simulations," in *Lead-Free Solder Cyclic Plasticity Characterization for Drop Test Simulations*, 2006.

[95]

P. Gudmundson and P. Fredriksson, "Modelling of interfaces at plastic deformations on the micron scale," in *IUTAM Symposium on Plasticity at the Micron Scale, Lyngby, Denmark, June 11-15*, 2006.

[96]

E. L. Bonnaud and P. Gudmundson, "Influence of component position on lead-free solder interconnections during drop test," in *7th Electronics Packaging Technology Conference, EPTC 2005; Singapore; Singapore; 7 December 2005 through 9 December 2005*, 2005, pp. 54-57.

[97]

P. Gudmundson and P. Fredriksson, "Interface conditions in strain gradient plasticity theories," in *joint ASME/ASCE/SES Conference on Mechanics and Materials, Baton Rouge, Louisiana, June 1 - 3*, 2005.

[98]

P. Gudmundson and P. Fredriksson, "Interface conditions in strain gradient plasticity theories," in *Interface conditions in strain gradient plasticity theories*, 2005.

[99]

L. Olasz and P. Gudmundson, "Prediction of residual stresses in high voltage cable insulation," in *Proc Annu. Conf. Expos. Exp. Appl. Mech.*, 2005, pp. 987-994.

[100]

P. Gudmundson, "Strain gradient effects in viscoelasticity," in *joint ASME/ASCE/SES Conference on Mechanics and Materials, Baton Rouge, Louisiana, June 1 - 3*, 2005.

[101]

P. Gudmundson and P. Fredriksson, "Thickness dependent yield strength of thin films," in *21th International Congress of Theoretical and Applied Mechanics, Warsaw*, 2004.

[102]

P. Gudmundson and P. Fredriksson, "Thickness Dependence of Viscoplastic Deformations in Thin Films," in *Proc. of the 9th Int. Conf. Mechanical Behaviour of Materials, Geneva, Switzerland, May 25-29*, 2003.

[103]

M. Nygårds, D. Chandrasekaran and P. Gudmundson, "Micromechanical Modeling of Two-Phase Steels," in *Materials Research Society Symposium - Proceedings*, 2001, p. Z8.8.1-Z8.8.6.

[104]

A. Wikström and P. Gudmundson, "Stresses in Thin Coatings from Curvature Measurements on Non-Planar Substrates," in *Materials Research Society Symposium - Proceedings*, 2001, pp. Z10.4.1-6.

[105]

P. Gudmundson and A. Wikström, "Stresses in Thin Films and Interconnect Lines," in *Stresses in Thin Films and Interconnect Lines*, 2001.

[106]

P. Gudmundson and J.-E. Lundgren, "Moisture absorption and desorption in composite laminates containing transverse matrix cracks," in *20th International Congress of Theoretical and Applied Mechanics, Session FE - Damage and failure of composites, Chicago*, 2000.

[107]

A. Wikström, P. Gudmundson and B. Suresh, "Passivated interconnect lines: Thermomechanical analysis and curvature measurements," in *Materials Research Society Symposium - Proceedings*, 2000, pp. 439-444.

[108]

M. Johnson and P. Gudmundson, "Transient recording and analysis of acoustic emission events resulting from damage evolution in composite laminates," in *Transient recording and analysis of acoustic emission events resulting from damage evolution in composite laminates*, 2000.

[109]

M. Åberg and P. Gudmundson, "Acoustic emission in laminated beams due to fiber fractures," in *Twelfth Int. Conf. on Composite Materials, ICCM-12, Paris, pap501, 1999*, 1999.

[110]

P. Gudmundson, "Initiation versus growth criteria for transverse matrix cracks," in *Proceedings of the Fourth International Conference on Progress in Durability Analysis of Composite Systems, Recent developments in durability analysis of composite systems, Eds. A.H. Cardon, H. Fukuda, K.L. Reifsnider and G. Verchery, Free University of Brussels*, 1999, pp. 351-354.

[111]

[112]

P. Gudmundson and A. Wikström, "Thermoelastic analysis of thin lines on substrates," in *Proceedings of the 5th International Workshop on Stress Induced Phenomena in Metallization", Eds. E. Arzt, P.S. Ho, O. Kraft and H. Okabayashi, Max-Planck-Institut für Metallforschung, Stuttgart, Germany, June 23-25, American Institute of Physics*, 1999, pp. 217-228.

[113]

P. Gudmundson, "Micromechanically based constitutive models for damage evolution in composite laminates," in *Proceedings of the Third International Conference on Progress in Durability Analysis of Composite Systems, Eds. K.L. Reifsnider, D.A. Dillard and A.H. Cardon, Virginia Polytech, September 14-17*, 1997, pp. 263-268.

[114]

P. Gudmundson, "Models and criteria for matrix crack initiation and growth in polymeric composite laminates," in *Proceedings of the 18th Risoe International Symposium on Materials Science: Polymeric Composites - Expanding the Limits, Eds. S.I. Andersen, P. Broendstedt, H. Lilholt, Aa. Lystrup, J.T. Rheinländer, B.F. Soerensen and H. Toftegaard, Roskilde*, 1997, pp. 31-42.

[115]

P. Gudmundson, "Prediction of effective properties of composite materials," in *Ninth International Conference on Mechanics of Composite Materials, Riga*, 1995, pp. 17-20.

[116]

E. Adolfsson and P. Gudmundson, "Matrix crack closure effects on the thermoelastic properties of [(0/90/+q/-q)_{s}]_{M} composite laminates," in *AMD-Vol.196, Failure Mechanisms in Advanced Polymeric Composites, Eds. G.A. Kardomateas and Y.D.S. Rajapakse*, 1994, pp. 125-140.

[117]

J. Grenestedt and P. Gudmundson, "Layup optimization of composite material systems," in *Optimal Design with Advanced Materials, Ed. P. Pedersen, Elsevier Science Publishers, Amsterdam*, 1993, pp. 311-336.

[118]

B. Gebart, P. Gudmundson and C. Lundemo, "An evaluation of alternative injection strategies in RTM," in *Proceedings of the SPI Composites Institute’s 47th Annual Conference, Cincinnatti, Ohio, USA*, 1992, pp. 16-D/1-16-D/8.

[119]

S. Olofsson, P. Gudmundson and L. Strömbeck, "Process simulation of wet filament winding and curing of thick walled cylinders," in *International SAMPE Symposium and Exhibition*, 1992, pp. 1132-1145.

[120]

B. Gebart *et al.*, "Analysis of the permeability in RTM reinforcements," in *Proceedings of the 8th International Conference on Composite Materials (ICCM-8), Honolulu, 1991. Eds. S.W. Tsai and G.S. Springer*, 1991, pp. 15E1-15E10.

[121]

P. Gudmundson, S. Östlund and W. Zang, "Local stresses and thermoelastic properties of composite laminates containing micro cracks," in *IUTAM Symposium on Local Mechanics Concepts for Composite Material Systems, Blacksburg, Virginia, Springer-Verlag*, 1991, pp. 283-308.

[122]

W. Zang and P. Gudmundson, "On integral equation methods for kinked cracks," in *Proceedings of the First International Conference on Computer Aided Assessment and Control of Localized Damage, Southampton, England*, 1990.

[123]

W. Zang and P. Gudmundson, "An integral equation method based on resultant forces on a piece-wise smooth crack in a finite plate," in *Proceedings of the 7th International Conference on Fracture (ICF7), Houston, Texas*, 1989, pp. 2127-2134.

[124]

P. Gudmundson, "Validity of asymptotic crack tip solutions for plastic materials," in *Proceedings of the 7th International Conference on Fracture (ICF7), Houston, Texas*, 1989, p. 315-322.

[125]

P. Gudmundson, "Determination of optimal design modifications using experimental modal parameters," in *Proceedings of the 4th International Modal Analysis Conference, Los Angeles, California*, 1986, pp. 1299-1304.

[126]

P. Gudmundson, "Changes in modal parameters resulting from small cracks," in *Proceedings of the 2nd International Modal Analysis Conference, Orlando, Florida*, 1984, p. 690-697.

[127]

C. Boer, P. Gudmundson and N. Rebelo, "Comparison of elasto-plastic FEM, rigid-plastic FEM and experiments for cylinder upsetting," in *Proceedings of the International Conference on Numerical Methods in Industrial Forming Processes, Swansea*, 1982, pp. 217-226.

[128]

P. Gudmundson, "Accelerated creep: Do we need more research?," in *Euromech Colloquium 486, Deformation and Fracture Processes in Paper and Wood Materials, Sundsvall, Sweden, June 12 - 15*, 2006.

[129]

P. Gudmundson, "Length scale effects for plasticity on the micron scale," in *Ohio Aerospace Institute (OAI) Distinguished Lectures Series, Cleveland, USA, July 10*, 2006.

[130]

P. Gudmundson, "Strain gradient plasticity of multilayer thin films - hardening and weakening effects," in *12th International Symposium on Plasticity, Halifax, Canada, July 17-22*, 2006.

[131]

P. Fredriksson and P. Gudmundson, "Size dependent yield strength and surface energies of thin films," in *Dislocations 2004, La Colle-sur-Loup, France*, 2004.

[132]

P. Gudmundson, "A unified treatment of strain gradient plasticity," in *Aerospace Distinguished Lecture Series, Department of Aerospace Engineering, Texas A&M University, May 6*, 2002.

[133]

P. Gudmundson, "Strain gradient plasticity, surface energies and consistent boundary conditions," in *Invited lecture. Challenges in Applied Mechanics, Lyngby, Denmark, July 25-27*, 2002.

[134]

P. Gudmundson and A. Wikström, "Stresses in Thin Films and Interconnect Lines," in *Invited lecture. European Workshop on Materials for Advanced Metallization, Sigtuna, Sweden, March 5-7*, 2001.

[135]

J. Alfthan, P. Gudmundson and S. Östlund, "Micro-mechanical model for mechanosorptive creep," in *2000 Progress in Paper Physics: A seminar, Grenoble, France, 11-15 September*, 2000.

[136]

J.-E. Lundgren and P. Gudmundson, "Influence of matrix cracks and swelling on moisture absorption in cross-ply GFRP laminates," in *Twelfth Int. Conf. on Composite Materials, ICCM-12, Paris*, 1999.

[137]

P. Gudmundson, "Modelling of Matrix Cracking in Composite Laminates," in *Invited lecture, the Annual Meeting of Gesellschaft fur Angewandte Mathematik und Mechanik, Regensburg, March 24-27*, 1997.

[138]

P. Gudmundson, "Modelling of Matrix Cracking in Composite Laminates," in *Modelling of Matrix Cracking in Composite Laminates*, 1997.

[139]

P. Gudmundson and . et al., *F65 Jubileumsskrift för tekniska fysiker : F65 från KTH berättar om sina yrkesliv.* , 2015.

[140]

[141]

P. Gudmundson, "Fracture and damage of composite laminates," in *Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures, *J. Hult and F. Rammerstorfer Ed., Udine : CISM | International Centre for Mechanical Sciences, 1994, pp. 111-139.

[142]

P. Gudmundson, "Effects of cracks and other geometrical changes on the vibration of structures : with special application to turbine blades," Doctoral thesis : KTH Royal Institute of Technology, Rapport / Hållfasthetslära, KTH, 37, 1982.

[143]

I. B. Ucel, P. Gupta and P. Gudmundson, "Experimental determination of the constitutive properties of a graphite anode layer in lithium-ion batteries using a bending test method.," , TRITA-SCI-RAP, 2021:007, 2021.

[144]

L. Olasz and P. Gudmundsson, "A non-linear viscoelastic constitutive model for XLPE and its application in residual stress prediction for high voltage cable insulation," , Trita-HFL, 2006:09, 2006.

[145]

L. Olasz and P. Gudmundson, "Residual strains in XLPE high voltage cable insulation," , Trita-HFL, 2006.

[146]

J. Alfthan and P. Gudmundson, "Linear constitutive model for mechano-sorptive creep in paper," , Report / Royal Institute of Technology, KTH Solid Mechanics, 375, 2004.

[147]

P. Gudmundson, "Corner problems," , Department of Solid Mechanics, Royal Institute of Technology, Stockholm, report, 105, 1989.

[148]

P. Gudmundson, "Integral equations for anti-plane shear," , Department of Solid Mechanics, Royal Institute of Technology, Stockholm, report, 108, 1989.

[149]

P. Gudmundson, "Isokrona spännings- töjningsdiagram och viskoelasticitetsteori för termoplaster," , Department od Solid Mechanics, Royal Institute of Technology, Stockholm, report, 66, 1985.

[150]

P. Gudmundson, "Analytical-numerical methods for the study of large deformations of solids, Part I: survey," , Brown Boveri Research report, KLR 80-16C, 1980.

[151]

P. Gudmundson, "The boundary integral equation (BIE) method - A new effective tool for stress calculations," , Brown Boveri Research Report, KLR 80-126C, 1980.

[152]

P. Croné, P. Gudmundson and J. Faleskog, "A model for reversed plasticity in dispersion hardened metals validated by uniaxial tension/compression experiments," (Manuscript).

[153]

P. Gupta *et al.*, "Layer-resolved Mechanical Degradation of a Ni-rich PositiveElectrode," (Manuscript).

[154]

P. Gupta and P. Gudmundson, "Modeling of local electrode stresses and pressures in lithium-ion battery packs using threedimensional homogenization.," (Manuscript).

Senaste synkning med DiVA:

2024-04-14 00:49:44

**KTH Royal Institute of Technology**

*SE-100 44 Stockholm Sweden +46 8 790 60 00*