Till innehåll på sidan
Till KTH:s startsida

Publikationer

[3]
A. Najarnezhadmashhadi et al., "Enhancing CO<inf>2</inf> capture efficiency in a lab-scale spray tower: An experimental study on flow configurations using potassium carbonate," Chemical engineering research & design, vol. 216, s. 186-199, 2025.
[4]
H. Grimler et al., "Water Diffusion, Drag and Absorption in an Anion-Exchange Membrane Fuel Cell," Journal of the Electrochemical Society, vol. 172, no. 2, 2025.
[7]
[8]
R. Yao et al., "Numerical investigation on reversible reactive flow inside ribbed channels with different inclined angles," International Journal of Heat and Mass Transfer, vol. 242, 2025.
[10]
F. İbiş-Özdemir et al., "Crystal growth of calcium oxalate mono- and dihydrate under laminar flow in microfluidic devices," CrystEngComm, vol. 27, no. 3, s. 337-346, 2025.
[11]
W. Wan, "Experimental and Modeling Studies on the Release and Condensation of Inorganics in a Pressurized Biomass Fluidized Bed Gasification Process," Doktorsavhandling Stockholm : KTH Royal Institute of Technology, TRITA-CBH-FOU, 2024:62, 2025.
[14]
C. R. Souza et al., "Crystallization-based recovery of niobium compounds from alkaline liquor," Separation and Purification Technology, vol. 360, 2025.
[19]
D. Ansari et al., "A novel hybrid-composite microchannel heat sink for extreme hotspot mitigation," International journal of thermal sciences, vol. 208, 2025.
[20]
M. Svärd et al., "Antisolvent crystallization of rare earth sulfate hydrates : Thermodynamics, kinetics and impact of iron," Separation and Purification Technology, vol. 354, 2025.
[23]
F. Olovsson et al., "Biobaserade lim för trä," , 2024.
[26]
L. Hohmann, "Bridging gaps in catalysis: from naphthalene decomposition to CO oxidation," Doktorsavhandling Stockholm : KTH Royal Institute of Technology, TRITA-CBH-FOU, 2024:37, 2024.
[31]
K. Möllersten et al., "Demystifying carbon removals in the context of offsetting for sub-global net-zero targets," Carbon Management, vol. 15, no. 1, 2024.
[33]
D. Ansari och C. Duwig, "A gyroid TPMS heat sink for electronic cooling," Energy Conversion and Management, vol. 319, 2024.
[37]
K. Bouton et al., "A structural battery with carbon fibre electrodes balancing multifunctional performance," Composites Science And Technology, vol. 256, s. 110728, 2024.
[39]
S. Davidsson et al., "Change of surfactant for emulsion systems," , 2024.
[40]
[41]
O. N. Bancerz Aleksiejczuk et al., "3D-Printing Hydrogel Robots," , 2024.
[42]
A. Olsson, A. Lefvert och S. Grönkvist, "An alternative pathway to negative emissions - revitalising the wood-based panel production in Sweden," Environmental Development, vol. 50, 2024.
[45]
A. Vdovin et al., "A test rig for the validation of CFD simulations of a passenger vehicle under hood environment," Case Studies in Thermal Engineering, vol. 59, 2024.
[50]
W. Raza et al., "A novel microchannel-twisted pinfin hybrid heat sink for hotspot mitigation," Applied Thermal Engineering, vol. 241, 2024.