Skip to main content

Publications by Mats Berg

Refereegranskade

Artiklar

[1]
R. Kulkarni, A. Qazizadeh and M. Berg, "Unsupervised rail vehicle running instability detection algorithm for passenger trains (iVRIDA)," Measurement, vol. 216, pp. 112894-112894, 2023.
[2]
I. Mendia-Garcia et al., "A survey on the modelling of air springs–secondary suspension in railway vehicles," Vehicle System Dynamics, vol. 60, no. 3, pp. 835-864, 2022.
[3]
Z. Liu, M. Berg and A. Ekmark, "Conceptual exploration of power peak shaving by smart train operation in rail freight transport," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, vol. 236, no. 7, pp. 838-849, 2022.
[5]
J. Jerrelind et al., "Contributions of vehicle dynamics to the energy efficient operation of road and rail vehicles," Vehicle System Dynamics, vol. 59, no. 7, pp. 1114-1147, 2021.
[6]
Q. Wu et al., "Freight train air brake models," International Journal of Rail transportation, 2021.
[7]
Z. Liu, M. Berg and T. Bustad, "Review of the existing energy labelling systems and a proposal for rail vehicles," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, vol. 235, no. 4, pp. 518-528, 2021.
[8]
R. Kulkarni et al., "Vehicle running instability detection algorithm (VRIDA): A signal based onboard diagnostic method for detecting hunting instability of rail vehicles," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, pp. 095440972110205, 2021.
[9]
V. V. Krishna et al., "An integrated numerical framework to investigate the running safety of overlong freight trains," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, 2020.
[10]
A. D. Rosa et al., "Monitoring of lateral and cross level track geometry irregularities through onboard vehicle dynamics measurements using machine learning classification algorithms," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, 2020.
[11]
V. V. Krishna, M. Berg and S. Stichel, "Tolerable longitudinal forces for freight trains in tight S-curves using three-dimensional multi-body simulations," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, vol. 234, no. 5, pp. 454-467, 2020.
[12]
T. Karis, M. Berg and S. Stichel, "Analysing the correlation between vehicle responses and track irregularities using dynamic simulations and measurements," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, 2019.
[13]
[14]
T. Karis et al., "Correlation of track irregularities and vehicle responses based on measured data," Vehicle System Dynamics, vol. 56, no. 6, pp. 967-981, 2018.
[15]
P. Pintado et al., "On the mechanical behavior of rubber springs for high speed rail vehicles," Journal of Vibration and Control, vol. 24, no. 20, pp. 4676-4688, 2018.
[16]
M. Spiryagin et al., "Influence of AC system design on the realisation of tractive efforts by high adhesion locomotives," Vehicle System Dynamics, vol. 55, no. 8, pp. 1241-1264, 2017.
[17]
C. Casanueva et al., "On integrated wheel and track damage prediction using vehicle-track dynamic simulations," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, vol. 231, no. 7, pp. 775-785, 2017.
[18]
M. Sh. Sichani, R. Enblom and M. Berg, "A fast wheel-rail contact model for application to damage analysis in vehicle dynamics simulation," Wear, vol. 366, pp. 123-130, 2016.
[19]
M. Shahzamanian Sichani, R. Enblom and M. Berg, "An alternative to FASTSIM for tangential solution of the wheel–rail contact," Vehicle System Dynamics, vol. 54, no. 6, pp. 748-764, 2016.
[20]
B. Dirks, R. Enblom and M. Berg, "Prediction of wheel profile wear and crack growth - comparisons with measurements," Wear, vol. 366, pp. 84-94, 2016.
[21]
R. Lundén et al., "Special edition of "Wear" to contain CM2015 proceedings," Wear, vol. 366, pp. 1-2, 2016.
[22]
N. Burgelman et al., "Influence of wheel-rail contact modelling on vehicle dynamic simulation," Vehicle System Dynamics, vol. 53, no. 8, pp. 1190-1203, 2015.
[23]
D. Thomas et al., "Rail vehicle response to lateral carbody excitations imitating crosswind," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, vol. 229, no. 1, pp. 34-47, 2015.
[24]
B. Dirks et al., "The development of a crack propagation model for railway wheels and rails," Fatigue & Fracture of Engineering Materials & Structures, vol. 38, no. 12, 2015.
[25]
O. Polach et al., "Validation of simulation models in the context of railway vehicle acceptance," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, vol. 229, no. 6, pp. 729-754, 2015.
[26]
M. Shahzamanian Sichani, R. Enblom and M. Berg, "A novel method to model wheel-rail normal contact in vehicle dynamics simulation," Vehicle System Dynamics, vol. 52, no. 12, pp. 1752-1764, 2014.
[27]
M. Sh. Sichani, R. Enblom and M. Berg, "Comparison of non-elliptic contact models : Towards fast and accurate modelling of wheel-rail contact," Wear, vol. 314, no. 1-2, pp. 111-117, 2014.
[28]
D. Thomas et al., "Improving crosswind stability of fast rail vehicles using active secondary suspension," Vehicle System Dynamics, vol. 52, no. 7, pp. 909-921, 2014.
[29]
M. Shahzamanian Sichani, R. Enblom and M. Berg, "Non-Elliptic Wheel-Rail Contact Modelling in Vehicle Dynamics Simulation," The international Journal of railway technology, vol. 3, no. 3, pp. 77-94, 2014.
[30]
M. Berg, "Preface to special issue on the Green Train programme," International Journal of Rail transportation, vol. 2, no. 1, 2014.
[31]
L. Mazzola and M. Berg, "Secondary suspension of railway vehicles - air spring modelling : Performance and critical issues," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, vol. 228, no. 3, pp. 225-241, 2014.
[32]
M. Li et al., "On the use of second-order derivatives of track irregularity for assessing vertical track geometry quality," Vehicle System Dynamics, vol. 50, no. SUPPL. 1, pp. 389-401, 2012.
[33]
R. Persson, B. Kufver and M. Berg, "On-track test of tilt control strategies for less motion sickness on tilting trains," Vehicle System Dynamics, vol. 50, no. 7, pp. 1103-1120, 2012.
[34]
M. K. Bhiwapurkar et al., "Effect of magnitudes and directions (mono-axis and multi-axis) of whole body-vibration exposures and subjects postures on the sketching performance," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, vol. 225, no. F1, pp. 71-83, 2011.
[35]
S. Bruni et al., "Modelling of suspension components in a rail vehicle dynamics context," Vehicle System Dynamics, vol. 49, no. 7, pp. 1021-1072, 2011.
[36]
D. Thomas et al., "Dynamics of a high-speed rail vehicle negotiating curves at unsteady crosswind," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, vol. 224, no. F6, pp. 567-579, 2010.
[37]
M. K. Bhiwapurkar et al., "Influence of Mono-axis Random Vibration on Reading Activity," Industrial Health, vol. 48, no. 5, pp. 675-681, 2010.
[38]
D. Thomas, M. Berg and S. Stichel, "Measurements and simulations of rail vehicle dynamics with respect to overturning risk," Vehicle System Dynamics, vol. 48, no. 1, pp. 97-112, 2010.
[39]
M. X. D. Li, E. G. Berggren and M. Berg, "Assessment of vertical track geometry quality based on simulations of dynamic track-vehicle interaction," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, vol. 223, no. 2, pp. 131-139, 2009.
[40]
J. Evans and M. Berg, "Challenges in simulation of rail vehicle dynamics," Vehicle System Dynamics, vol. 47, no. 8, pp. 1023-1048, 2009.
[41]
M. X. D. Li et al., "Assessing track geometry quality based on wavelength spectra and track-vehicle dynamic interaction," Vehicle System Dynamics, vol. 46, no. Suppl. S, pp. 261-276, 2008.
[42]
R. Enblom and M. Berg, "Impact of non-elliptic contact modelling in wheel wear simulation," Wear, vol. 265, no. 9-10, pp. 1532-1541, 2008.
[43]
B. Diedrichs, S. Krajnovic and M. Berg, "On the aerodynamics of car body vibrations of high-speed trains crusing inside tunnels," ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS, vol. 2, no. 1, pp. 51-75, 2008.
[44]
R. Enblom and M. Berg, "Proposed procedure and trial simulation of rail profile evolution due to uniform wear," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, vol. 222, no. 1, pp. 15-25, 2008.
[45]
B. Diedrichs et al., "Vehicle dynamics of a high-speed passenger car due to aerodynamics inside tunnels," Proceedings of the Institution of mechanical engineers. Part F, journal of rail and rapid transit, vol. 221, no. 4, pp. 527-545, 2007.
[46]
N. Chaar and M. Berg, "Simulation of vehicle-track interaction with flexible wheelsets, moving track models and field tests," Vehicle System Dynamics, vol. 44, no. Suppl., pp. 921-931, 2006.
[48]
N. Chaar and M. Berg, "Vehicle-track dynamic simulations of a locomotive considering wheelset structural flexibility and comparison with measurements," Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, vol. 219, no. 4, pp. 225-238, 2005.
[49]
N. Chaar and M. Berg, "Experimental and numerical modal analyses of a loco wheelset," Vehicle System Dynamics, vol. 41, no. Suppl., pp. 597-606, 2004.
[50]
P. Carlbom and M. Berg, "Passengers, seats and carbody in rail vehicle dynamics," Vehicle System Dynamics, vol. 37, pp. 290-300, 2002.
[51]
T. Jendel and M. Berg, "Prediction of wheel profile wear - Methodology and verification," Vehicle System Dynamics, vol. 37, pp. 502-513, 2002.

Konferensbidrag

[52]
A. Ait-Ali et al., "Assessing Innovations in High-Speed Rail Infrastructure," in Socioeconomic Impacts of High-Speed Rail Systems - Proceedings of the 2nd International Workshop on High-Speed Rail Socioeconomic Impacts, IW-HSR 2022, 2023, pp. 217-233.
[53]
R. Kulkarni et al., "iVRIDA: intelligent Vehicle Running Instability Detection Algorithm for high-speed rail vehicles using Temporal Convolution Network : – A pilot study," in Proceedings of the 7th European Conference of the Prognostics and Health Management Society 2022, 2022, pp. 269-277.
[54]
E. Khoramzad et al., "ESTIMATION OF SURFACE TRACTION AT HIGH CREEPAGES AND ITS APPLICATION TO PREDICTION OF WEAR, RCF AND CURVE SQUEAL NOISE," in CM 2022 : 12th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Conference Proceedings, 2022, pp. 484-490.
[55]
R. Kulkarni, A. Qazizadeh and M. Berg, "Identification of vehicle response features for onboard diagnosis of vehicle running instability," in 2022 IEEE International Conference on Prognostics and Health Management (ICPHM), 2022, pp. 52-57.
[56]
Z. Liu et al., "Saving Energy and Cost with application of Railway Smart Wayside Object Controllers," in The Fifth International Conference on Railway Technology: Research, Development and Maintenance, Montpellier, France, 22-25 August 2022, 2022.
[57]
Z. Liu, M. Berg and A. Ekmark, "Investigation of Power Peak Reduction in Rail Freight Transport," in Proceedings of the 2nd International Conference on Rail Transportation, 2021.
[59]
Z. Liu, M. Berg and A. Ekmark, "Study of the Dynamic Performance of Pantograph at Speeds Close to the Critical Speed on Soft Catenary System," in Proceedings of the 2nd International Conference on Rail Transportation, 2021.
[60]
H. Karlsson et al., "Condition Monitoring of Rail Vehicle Suspension Elements : A Machine Learning Approach," in Lecture Notes in Mechanical Engineering, 2020, pp. 119-127.
[61]
R. Kulkarni et al., "Fault detection and isolation method for vehicle running instability from vehicle dynamics response using machine learning," in Proceedings of 11th International Conference on Railway Bogies and Running Gears (BOGIE'19), 2019.
[62]
T. Karis et al., "Correlation of track irregularities and vehicle responses based on measured data," in The Dynamics of Vehicles on Roads and Tracks, Vol 2, 2018, pp. 1285-1290.
[63]
B. Dirks et al., "Wheel damage prediction for Universal Cost Model applications," in The Dynamics of Vehicles on Roads and Tracks, 2018, pp. 531-536.
[64]
V. V. Krishna, M. Berg and S. Stichel, "Longitudinal Train Dynamics for Freight Wagons passing through an S-curve," in Proceedings of the First International Railway Symposium Aachen (IRSA), 2017, pp. 193-203.
[65]
M. Shahzamanian Sichani, R. Enblom and M. Berg, "An alternative to FASTSIM for tangential solution of the wheel-rail contact," in The Dynamics of Vehicles on Roads and Tracks - Proceedings of the 24th Symposium of the International Association for Vehicle System, 2016, pp. 1377-1385.
[66]
C. Casanueva, R. Enblom and M. Berg, "Comparison of wear prediction models for different contact conditions," in Proceedings of the 24th Symposium of the International Association for Vehicle System Dynamics (IAVSD 2015), Graz, Austria, 17-21 August 2015, 2016, pp. 871-878.
[67]
B. Dirks, R. Enblom and M. Berg, "Prediction of wheel profile wear and crack growth : Comparisons with measurements," in CM 2015 - 10th International Conference on Contact Mechanics of Wheel / Rail Systems, 2015.
[68]
M. S. Sichani, R. Enblom and M. Berg, "Wheel-rail contact modeling for damage predictions in dynamics simulation software," in CM 2015 - 10th International Conference on Contact Mechanics of Wheel / Rail Systems, 2015.
[70]
N. Burgelman et al., "Comparison of wheel/rail contact models applied for online vehicle dynamic simulation," in 23nd International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD 2013); Qingdao, China, 19-28 August, 2013, 2013.
[71]
M. S. Sichani, R. Enblom and M. Berg, "Comparison of Non-elliptic Contact Models : Towards Fast and Accurate Modelling of Wheel-Rail Contact," in Proceeding of 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, 2012, pp. 120-128.
[72]
E. Andersson and M. Berg, "Greenhouse gas emissions from rail services : Present and future," in Proceedings of Railways and Environment, 2010.
[73]
M. K. Bhiwapurkar et al., "Study of human comfort under thermal and vibratory environment using physiological indices," in 16th International Congress on Sound and Vibration 2009, ICSV 2009, 2009, pp. 4376-4383.
[74]
T. Forsberg et al., "Condition Monitoring of Train Ride Stability," in Proceedings of the 7th International Conference on Railway Bogies and Running Gears, BOGIE'07, Budapest, September 3-6, 2007, 2007, pp. 271-280.
[75]
R. Enblom and M. Berg, "Emerging engineering models for wheel/rail wear simulation," in Proceedings of the 8th International Conference Railway Engineering, London, June 29-30, 2005, 2005.
[76]
E. Berggren and M. Berg, "Simulation, Development and Field Testing of a Track StiffnessMeasurement Vehicle," in 8th Interntaional Heavy Haul Conference, Rio de Janeiro, 2005.
[77]
B. Diedrichs, M. Berg and S. Krajnovic, "Large eddy simulations of a typical European high-speed train inside tunnels," in 2004 SAE World Congress, Detroit, MI, USA, 8-11 March 2004, 2004.
[78]
B. Diedrichs, M. Berg and S. Krajnovic, "Large eddy simulations of the flow around high-speed trains cruising inside tunnels," in ECCOMAS 2004 - European Congress on Computational Methods in Applied Sciences and Engineering, 2004, pp. 1-21.
[79]
R. Enblom and M. Berg, "Towards calibrated wheel wear simulation : a comparison between traditional approach and novel methods," in Proceedings of the 6th International Conference on Railway Bogies and Running Gears, Budapest, September 13-16, 2004., 2004.

Kapitel i böcker

[80]
O. Polach, M. Berg and S. Iwnicki, "Simulation," in Handbook of Railway Vehicle Dynamics, Simon Iwnicki Ed., : Taylor & Francis Group, 2006, pp. 359-421.

Icke refereegranskade

Artiklar

[81]
Z. Li et al., "Special issue of Wear on Contact Mechanics 2018," Wear, vol. 456, 2020.
[82]
V. Petrov, M. Berg and I. Persson, "Estimation of wheel-rail friction for vehicle certification," Vehicle System Dynamics, vol. 52, no. 8, pp. 1099-1114, 2013.
[83]
S. Tyskeng et al., "Ecological and economical Critera in Vehicle Design : Taking on the challenge," Public Service Review: European Union, no. 19, 2009.

Konferensbidrag

[85]
S. Stichel et al., "Wear and RCF prediction based on improved contact mechanics modelling," in 11th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2018; Delft; Netherlands; 24-27 September 2018, 2018.
[86]
C. Casanueva et al., "Track damage prediction for Universal Cost Model applications," in Proceedings of the 25th IAVSD Symposium on Dynamics of Vehicles on Roads and Tracks, 2017.
[87]
D. Thomas et al., "Rail Vehicle Response to Lateral Carbody Excitations Imitating Crosswind," in 22nd International Symposium on Dynamics of Vehicles on Road and Tracks, 2011.
[88]
D. Thomas et al., "Dynamics of a High-Speed Rail Vehicle Negotiating Curves at Unsteady Crosswind," in 21st International Symposium on Dynamics of Vehicles on Road and Tracks, 2009.
[89]
A. Stensson Trigell et al., "ECO2 Vehicle Design : an initiative for a holistic perspective on future vehicle concepts," in TRA 2008. Ljubljana, Slovenia. April 21-24, 2008, 2008.
[90]
M. Berg, "Understanding wear and profile changes of wheels and rails," in Proceedings of Conference on Advancing Practical Strategies for Wheel/Rail Interface Management, 2004.
[91]
R. Enblom and M. Berg, "Wheel Wear Modelling Including Disc Braking and Contact Environment : Simulation of 18 Months of Commuter Service in Stockholm," in Proceedings of the 14th International Wheelset Congress, 2004.

Böcker

[92]
E. Andersson et al., Rail Systems and Rail Vehicles : Part 2: Rail Vehicles. 1st ed. Stockholm : KTH Royal Institute of Technology, 2016.

Rapporter

[93]
Z. Liu, S. Stichel and M. Berg, "Overview of technology and development of maglev and hyperloop systems," , TRITA-SCI-RAP, 2022:001, 2022.
[95]
O. Fröidh and M. Berg, "Trafikeringskostnader för höghastighetståg," Stockholm : KTH Royal Institute of Technology, TRITA-ABE-RPT, 2123, 2021.
[96]
E. Andersson et al., "Varför behövs Nya Stambanor i Sverige?," Stockholm : KTH Royal Institute of Technology, KTH Railway Group publications, 20-01, 2020.
[97]
O. Fröidh and M. Berg, "Framtida trafikeringskostnader och utveckling av persontågsparken : Slutrapport," Kungliga Tekniska högskolan, TRITA-ABE-RPT, 1912, 2019.
[101]
B.-L. Nelldal, "Requirements toward the freight system of 2030/2050 : Capacity4Rail Deliverable 21.2, EC Contract No FP7- 605650," Stockholm : KTH Royal Institute of Technology, TRITA-TEC-RR 17-002, 2017.

Proceedings (redaktörskap)

[105]
"Special Issue: State of the Art Papers of the 21st IAVSD Symposium," , Taylor & Francis, Vehicle System Dynamics, International Journal of Vehicle Mechanics and Mobility, Vol 47, No 8, 2009.
Senaste synkning med DiVA:
2024-04-21 03:06:52