N. K. Kalita and M. Hakkarainen, "Integrating biodegradable polyesters in a circular economy," CURRENT OPINION IN GREEN AND SUSTAINABLE CHEMISTRY, vol. 40, 2023.

[14]

J. G. Yao et al., "Lignin nanoparticle-enhanced biobased resins for digital light processing 3D printing : Towards high resolution and tunable mechanical properties," European Polymer Journal, vol. 194, 2023.

[15]

J. G. Yao and M. Hakkarainen, "Methacrylated wood flour-reinforced "all-wood" derived resin for digital light processing (DLP) 3D printing," COMPOSITES COMMUNICATIONS, vol. 38, pp. 101506, 2023.

[16]

N. Kasmi, E. Bäckström and M. Hakkarainen, "Open-loop recycling of post-consumer PET to closed-loop chemically recyclable high-performance polyimines," Resources, Conservation and Recycling, vol. 193, 2023.

[17]

B. L. Tardy et al., "Prospects for the integration of lignin materials into the circular economy," Materials Today, vol. 65, pp. 122-132, 2023.

[18]

K. H. Adolfsson et al., "Scavenging of DPPH by Persistent Free Radicals in Carbonized Particles," Advanced Sustainable Systems, vol. 7, no. 3, 2023.

[19]

H. Kim et al., "Toward Sustaining Bioplastics : Add a Pinch of Seasoning," ACS Sustainable Chemistry and Engineering, vol. 11, no. 5, pp. 1846-1856, 2023.

[20]

N. K. Kalita and M. Hakkarainen, "Triggering Degradation of Cellulose Acetate by Embedded Enzymes : Accelerated Enzymatic Degradation and Biodegradation under Simulated Composting Conditions," Biomacromolecules, vol. 24, no. 7, pp. 3290-3303, 2023.

[21]

A. Liguori, K. I. Garfias González and M. Hakkarainen, "Unexpected self-assembly of carbon dots during digital light processing 3D printing of vanillin Schiff-base resin," Polymer, vol. 283, 2023.

[22]

S. Subramaniyan et al., "Vanillin-Derived Thermally Reprocessable and Chemically Recyclable Schiff-Base Epoxy Thermosets," Global Challenges, vol. 7, no. 4, 2023.

[23]

X. Lopez-Lorenzo et al., "Whole-cell Mediated Carboxylation of 2-Furoic Acid Towards the Production of Renewable Platform Chemicals and Biomaterials," ChemCatChem, vol. 15, no. 6, 2023.

[24]

M. Benedikt Maria Köhnlein et al., "Bioconversion of food waste to biocompatible wet-laid fungal films," Materials & design, vol. 216, pp. 110534, 2022.

[25]

B. Guo et al., "Conformational Selection in Biocatalytic Plastic Degradation by PETase," ACS Catalysis, vol. 12, no. 6, pp. 3397-3409, 2022.

[26]

C. Noe et al., "DLP-printable fully biobased soybean oil composites," Polymer, vol. 247, pp. 124779, 2022.

[27]

S. Gazzotti et al., "DOX mediated synthesis of PLA-co-PS graft copolymers with matrix-driven self-assembly in PLA-based blends," European Polymer Journal, vol. 170, pp. 111157, 2022.

[28]

N. Yadav and M. Hakkarainen, "Degradation of Cellulose Acetate in Simulated Aqueous Environments : One-Year Study," Macromolecular materials and engineering, vol. 307, no. 6, pp. 2100951, 2022.

[29]

N. Benyahia Erdal and M. Hakkarainen, "Degradation of Cellulose Derivatives in Laboratory, Man-Made, and Natural Environments," Biomacromolecules, vol. 23, no. 7, pp. 2713-2729, 2022.

[30]

A. Liguori and M. Hakkarainen, "Designed from Biobased Materials for Recycling : Imine-Based Covalent Adaptable Networks," Macromolecular rapid communications, vol. 43, no. 13, pp. 2100816, 2022.

[31]

C. Noè et al., "Frontal-Photopolymerization of Fully Biobased Epoxy Composites," Macromolecular materials and engineering, vol. 307, no. 6, pp. 2100864, 2022.

[32]

E. R. K. B. Wijayarathna et al., "Fungal textile alternatives from bread waste with leather-like properties," Resources, Conservation and Recycling, vol. 179, pp. 106041, 2022.

[33]

M. Zanon et al., "Microwave-assisted methacrylation of chitosan for 3D printable hydrogels in tissue engineering," Materials Advances, vol. 3, no. 1, pp. 514-525, 2022.

[34]

A. Liguori et al., "Photocurable extended vanillin-based resin for mechanically and chemically recyclable, self-healable and digital light processing 3D printable thermosets," European Polymer Journal, vol. 178, 2022.

[35]

C. Pronoitis, M. Hakkarainen and K. Odelius, "Structurally Diverse and Recyclable Isocyanate-Free Polyurethane Networks from CO₂-Derived Cyclic Carbonates," ACS Sustainable Chemistry and Engineering, vol. 10, no. 7, pp. 2522-2531, 2022.

[36]

A. K. Mohanty et al., "Sustainable polymers," Nature Reviews Methods Primers, vol. 2, no. 1, 2022.

[37]

W. Xuan, K. Odelius and M. Hakkarainen, "Tailoring Oligomeric Plasticizers for Polylactide through Structural Control," ACS Omega, vol. 7, no. 16, pp. 14305-14316, 2022.

[38]

S. E. Svensson et al., "Turning food waste to antibacterial and biocompatible fungal chitin/chitosan monofilaments," International Journal of Biological Macromolecules, vol. 209, pp. 618-630, 2022.

[39]

L. Cederholm et al., "“Like Recycles Like” : Selective Ring-Closing Depolymerization of Poly(L-Lactic Acid) to L-Lactide," Angewandte Chemie International Edition, vol. 61, no. 33, 2022.

[40]

N. Yadav, K. H. Adolfsson and M. Hakkarainen, "Carbon Dot-Triggered Photocatalytic Degradation of Cellulose Acetate," Biomacromolecules, vol. 22, no. 5, pp. 2211-2223, 2021.

[41]

Z. Feng et al., "Carbon dot/polymer nanocomposites : From green synthesis to energy, environmental and biomedical applications," Sustainable Materials and Technologies, vol. 29, 2021.

[42]

C. Noe, M. Hakkarainen and M. Sangermano, "Cationic UV-Curing of Epoxidized Biobased Resins," Polymers, vol. 13, no. 1, 2021.

[43]

N. Yadav and M. Hakkarainen, "Degradable or not? : Cellulose acetate as a model for complicated interplay between structure, environment and degradation," Chemosphere, vol. 265, 2021.

[44]

C. Noe et al., "From polysaccharides to UV-curable biorenewable organo/hydrogels for methylene blue removal," Polymer, vol. 235, 2021.

[45]

S. E. Svensson et al., "Fungal textiles : Wet spinning of fungal microfibers to produce monofilament yarns," Sustainable Materials and Technologies, vol. 28, 2021.

[46]

K. H. Adolfsson et al., "In Vivo Versus In Vitro Degradation of a 3D Printed Resorbable Device for Ligation of Vascular Tissue in Horses," Macromolecular Bioscience, vol. 21, no. 10, 2021.

[47]

C. Pronoitis, M. Hakkarainen and K. Odelius, "Long-chain polyamide covalent adaptable networks based on renewable ethylene brassylate and disulfide exchange," Polymer Chemistry, vol. 12, no. 39, pp. 5668-5678, 2021.

[48]

E. Bäckström, K. Odelius and M. Hakkarainen, "Microwave Assisted Selective Hydrolysis of Polyamides from Multicomponent Carpet Waste," Global Challenges, 2021.

[49]

J. G. Yao, K. Odelius and M. Hakkarainen, "Microwave Hydrophobized Lignin with Antioxidant Activity for Fused Filament Fabrication," ACS APPLIED POLYMER MATERIALS, vol. 3, no. 7, pp. 3538-3548, 2021.

[50]

H. Xu et al., "Nanostructured Phase Morphology of a Biobased Copolymer for Tough and UV-Resistant Polylactide," ACS Applied Polymer Materials, vol. 3, no. 4, pp. 1973-1982, 2021.

[51]

G. Mohammadkhani et al., "New Solvent and Coagulating Agent for Development of Chitosan Fibers by Wet Spinning," Polymers, vol. 13, no. 13, pp. 2121, 2021.

[52]

H. Xu et al., "Osteoconductive and Antibacterial Poly(lactic acid) Fibrous Membranes Impregnated with Biobased Nanocarbons for Biodegradable Bone Regenerative Scaffolds," Industrial & Engineering Chemistry Research, vol. 60, no. 32, pp. 12021-12031, 2021.

[53]

G. Melilli et al., "Photocurable “all-lignocellulose” derived hydrogel nanocomposites for adsorption of cationic contaminants," Sustainable Materials and Technologies, vol. 27, 2021.

[54]

S. De Lima et al., "Rupture and chemical accumulation in contact lenses with dexamethasone eye drop administration after congenital cataract surgery," Acta Ophthalmologica, 2021.

[55]

C. Pronoitis, M. Hakkarainen and K. Odelius, "Solubility-governed architectural design of polyhydroxyurethane-graft-poly(epsilon-caprolactone) copolymers," Polymer Chemistry, vol. 12, no. 2, pp. 196-208, 2021.

[56]

W. Xuan, K. Odelius and M. Hakkarainen, "Tunable polylactide plasticizer design: Rigid stereoisomers," European Polymer Journal, vol. 157, 2021.

[57]

C. Noe et al., "UV-Cured Biodegradable Methacrylated Starch-Based Coatings," Coatings, vol. 11, no. 2, 2021.

[58]

E. Bäckström, K. Odelius and M. Hakkarainen, "Ultrafast microwave assisted recycling of PET to a family of functional precursors and materials," European Polymer Journal, vol. 151, no. 110441, 2021.

[59]

J. M. Koo et al., "Biobased thermoplastic elastomer with seamless 3D-Printability and superior mechanical properties empowered by in-situ polymerization in the presence of nanocellulose," Composites Science And Technology, vol. 185, 2020.

[60]

J. G. Yao, K. Odelius and M. Hakkarainen, "Carbonized lignosulfonate-based porous nanocomposites for adsorption of environmental contaminants," Functional Composite Materials, vol. 1, no. 1, 2020.

[61]

A. O. Koyejo et al., "Cellulose-Based Reduced Nanographene Oxide on Gold Nanoparticle Supports for CO2 Electrocatalysis," ChemElectroChem, vol. 7, no. 24, pp. 4889-4899, 2020.

[62]

A. Yadav et al., "Cellulose-Derived Nanographene Oxide Reinforced Macroporous Scaffolds of High Internal Phase Emulsion-Templated Cross-Linked Poly(ϵ-caprolactone)," Biomacromolecules, vol. 21, no. 2, pp. 589-596, 2020.

[63]

K. Adolfsson, N. Yadav and M. Hakkarainen, "Cellulose-derived hydrothermally carbonized materials and their emerging applications," Current Opinion in Green and Sustainable Chemistry, vol. 23, pp. 18-24, 2020.

[64]

G. Melilli et al., "DLP 3D Printing Meets Lignocellulosic Biopolymers : Carboxymethyl Cellulose Inks for 3D Biocompatible Hydrogels," Polymers, vol. 12, no. 8, 2020.

[65]

W. Xuan, K. Odelius and M. Hakkarainen, "Dual-Functioning Antibacterial Eugenol-Derived Plasticizers for Polylactide," Biomolecules, vol. 10, no. 7, 2020.

[66]

N. Benyahia Erdal et al., "Hydrolytic Degradation of Porous Crosslinked Poly(epsilon-Caprolactone) Synthesized by High Internal Phase Emulsion Templating," Polymers, vol. 12, no. 8, 2020.

[67]

G. Melilli et al., "Intriguing Carbon Flake Formation during Microwave-Assisted Hydrothermal Carbonization of Sodium Lignosulfonate," Global Challenges, vol. 4, no. 8, 2020.

[68]

C. Noe et al., "Light Processable Starch Hydrogels," Polymers, vol. 12, no. 6, 2020.

[69]

Y. Xu et al., "Methacrylated lignosulfonate as compatibilizer for flax fiber reinforced biocomposites with soybean-derived polyester matrix," Composites Communications, vol. 22, 2020.

[70]

L. Cederholm et al., "Microwave processing of lignin in green solvents : A high-yield process to narrow-dispersity oligomers," Industrial crops and products (Print), vol. 145, 2020.

[71]

T. Rahimi-Aghdam et al., "Nitrogen and phosphorous doped graphene quantum dots : Excellent flame retardants and smoke suppressants for polyacrylonitrile nanocomposites," Journal of Hazardous Materials, vol. 381, 2020.

[72]

K. H. Adolfsson, G. Melilli and M. Hakkarainen, "Oxidized Carbonized Cellulose-Coated Filters for Environmental Contaminant Adsorption and Detection," Industrial & Engineering Chemistry Research, vol. 59, no. 30, pp. 13578-13587, 2020.

[73]

C. Tonda-Turo et al., "Photocurable chitosan as bioink for cellularized therapies towards personalized scaffold architecture," Bioprinting, vol. 18, 2020.

[74]

Y. Xu, K. Odelius and M. Hakkarainen, "Photocurable, Thermally Reprocessable, and Chemically Recyclable Vanillin-Based Imine Thermosets," ACS Sustainable Chemistry and Engineering, vol. 8, no. 46, pp. 17272-17279, 2020.

[75]

E. McGivney et al., "Rapid Physicochemical Changes in Microplastic Induced by Biofilm Formation," Frontiers in Bioengineering and Biotechnology, vol. 8, 2020.

[76]

M. Golda-Cepa et al., "Recent progress on parylene C polymer for biomedical applications : A review," Progress in organic coatings, vol. 140, 2020.

[77]

Y. Xu, K. Odelius and M. Hakkarainen, "Recyclable and Flexible Polyester Thermosets Derived from Microwave-Processed Lignin," ACS Applied Polymer Materials, vol. 2, no. 5, pp. 1917-1924, 2020.

[78]

L. H. Gustavsson, K. H. Adolfsson and M. Hakkarainen, "Thermoplastic "All-Cellulose" Composites with Covalently Attached Carbonized Cellulose," Biomacromolecules, vol. 21, no. 5, pp. 1752-1761, 2020.

[79]

L. Cederholm et al., "Turning natural delta-lactones to thermodynamically stable polymers with triggered recyclability," Polymer Chemistry, vol. 11, no. 30, pp. 4883-4894, 2020.

[80]

C. Pronoitis et al., "Biobased Polyamide Thermosets : From a Facile One-Step Synthesis to Strong and Flexible Materials," Macromolecules, vol. 52, no. 16, pp. 6181-6191, 2019.

[81]

S. Gazzotti et al., "Cellulose nanofibrils as reinforcing agents for PLA-based nanocomposites : An in situ approach," Composites Science And Technology, vol. 171, pp. 94-102, 2019.

[82]

N. Benyahia Erdal, J. G. Yao and M. Hakkarainen, "Cellulose-Derived Nanographene Oxide Surface-Functionalized Three-Dimensional Scaffolds with Drug Delivery Capability," Biomacromolecules, vol. 20, no. 2, pp. 738-749, 2019.

[83]

E. Bäckström, K. Odelius and M. Hakkarainen, "Designed from Recycled : Turning Polyethylene Waste to Covalently Attached Polylactide Plasticizers," ACS Sustainable Chemistry and Engineering, vol. 7, no. 12, pp. 11004-11013, 2019.

[84]

S. S. Delekta et al., "Fully inkjet printed ultrathin microsupercapacitors based on graphene electrodes and a nano-graphene oxide electrolyte," Nanoscale, vol. 11, no. 21, pp. 10172-10177, 2019.

[85]

K. H. Adolfsson et al., "Importance of Surface Functionalities for Antibacterial Properties of Carbon Spheres," Advanced Sustainable Systems, 2019.

[86]

W. Xuan, M. Hakkarainen and K. Odelius, "Levulinic Acid as a Versatile Building Block for Plasticizer Design," ACS Sustainable Chemistry and Engineering, vol. 7, no. 14, pp. 12552-12562, 2019.

[87]

F. Bianchi et al., "Novel sample-substrates for the determination of new psychoactive substances in oral fluid by desorption electrospray ionization-high resolution mass spectrometry," Talanta : The International Journal of Pure and Applied Analytical Chemistry, vol. 202, pp. 136-144, 2019.

[88]

Y. Xu, K. Odelius and M. Hakkarainen, "One-Pot Synthesis of Lignin Thermosets Exhibiting Widely Tunable Mechanical Properties and Shape Memory Behavior," ACS Sustainable Chemistry and Engineering, vol. 7, no. 15, pp. 13456-13463, 2019.

[89]

Z. Feng et al., "Photocrosslinked Chitosan Hydrogels Reinforced with Chitosan-Derived no-Graphene Oxide," Macromolecular Chemistry and Physics, vol. 220, no. 13, 2019.

[90]

T. Rahimi-Aghdam et al., "Polyacrylonitrile/N,P co-doped graphene quantum dots-layered double hydroxide nanocomposite : Flame retardant property, thermal stability and fire hazard," European Polymer Journal, vol. 120, 2019.

[91]

N. Benyahia Erdal, M. Hakkarainen and A. Blomqvist, "Polymer, giant molecules with properties : An entertaining activity introducing polymers to young students," Journal of Chemical Education, vol. 96, no. 8, pp. 1691-1695, 2019.

[92]

Z. Feng et al., "Recyclable fully biobased chitosan adsorbents spray-dried in one-pot to microscopic size and enhanced adsorption capacity," Biomacromolecules, vol. 20, no. 5, pp. 1956-1964, 2019.

[93]

J. Alongi et al., "Superior flame retardancy of cotton by synergetic effect of cellulose-derived nano-graphene oxide carbon dots and disulphide-containing polyamidoamines," Polymer degradation and stability, vol. 169, 2019.

[94]

N. Benyahia Erdal and M. Hakkarainen, "Construction of Bioactive and Reinforced Bioresorbable Nanocomposites by Reduced Nano-Graphene Oxide Carbon Dots," Biomacromolecules, vol. 19, no. 3, pp. 1074-1081, 2018.

[95]

N. B. Erdal et al., "Green Strategy to Reduced Nanographene Oxide through Microwave Assisted Transformation of Cellulose," ACS Sustainable Chemistry and Engineering, vol. 6, no. 1, pp. 1245-1255, 2018.

[96]

N. Benyahia Erdal et al., "In vitro and in vivo effects of ophthalmic solutions on silicone hydrogel bandage lens material Senofilcon A," Clinical and experimental optometry, vol. 101, no. 3, pp. 354-362, 2018.

[97]

Y. Xu et al., "Isosorbide as Core Component for Tailoring Biobased Unsaturated Polyester Thermosets for a Wide Structure- Property Window," Biomacromolecules, vol. 19, no. 7, pp. 3077-3085, 2018.

[98]

K. H. Adolfsson, C.-F. Lin and M. Hakkarainen, "Microwave Assisted Hydrothermal Carbonization and Solid State Postmodification of Carbonized Polypropylene," ACS Sustainable Chemistry and Engineering, vol. 6, no. 8, pp. 11105-11114, 2018.

[99]

Z. Feng et al., "Microwave carbonized cellulose for trace pharmaceutical adsorption," Chemical Engineering Journal, vol. 346, pp. 557-566, 2018.

[100]

D. Wu et al., "Nano-graphene oxide functionalized bioactive poly(lactic acid) and poly(ε-caprolactone) nanofibrous scaffolds," Materials, vol. 11, no. 4, 2018.

[101]

S. Gazzotti et al., "One-Pot Synthesis of Sustainable High-Performance Thermoset by Exploiting Eugenol Functionalized 1,3-Dioxolan-4-one," ACS Sustainable Chemistry and Engineering, vol. 6, no. 11, pp. 15201-15211, 2018.

[102]

Z. Feng, K. Odelius and M. Hakkarainen, "Tunable chitosan hydrogels for adsorption : Property control by biobased modifiers," Carbohydrate Polymers, vol. 196, pp. 135-145, 2018.

[103]

Z. Feng et al., "Biobased Nanographene Oxide Creates Stronger Chitosan Hydrogels with Improved Adsorption Capacity for Trace Pharmaceuticals," ACS Sustainable Chemistry and Engineering, vol. 5, no. 12, pp. 11525-11535, 2017.

[104]

H. Xu et al., "Coffee Grounds to Multifunctional Quantum Dots : Extreme Nanoenhancers of Polymer Biocomposites," ACS Applied Materials and Interfaces, vol. 9, no. 33, pp. 27972-27983, 2017.

[105]

H. Xu, L. Xie and M. Hakkarainen, "Coffee-Ground-Derived Quantum Dots for Aqueous Processable Nanoporous Graphene Membranes," ACS Sustainable Chemistry and Engineering, vol. 5, no. 6, pp. 5360-5367, 2017.

[106]

A.-C. Albertsson and M. Hakkarainen, "Designed to degrade Suitably designed degradable polymers can play a role in reducing plastic waste," Science, vol. 358, no. 6365, pp. 872-873, 2017.

[107]

M. Michalak et al., "Diversifying Polyhydroxyalkanoates - End-Group and Side-Chain Functionality," Current Organic Synthesis, vol. 14, no. 6, pp. 757-767, 2017.

[108]

H. Xu et al., "Heat-Resistant and Microwaveable Poly(Iactic acid) by Quantum-Dot Promoted Stereocomplexation," ACS Sustainable Chemistry and Engineering, vol. 5, no. 12, pp. 11607-11617, 2017.

[109]

M. Michalak, P. Kurcok and M. Hakkarainen, "Polyhydroxyalkanoate-based drug delivery systems," Polymer international, vol. 66, no. 5, pp. 617-622, 2017.

[110]

M. Michalak et al., "Polyhydroxyalkanoates as promising materials in biomedical systems," Frontiers in Drug Design and Discovery, no. 1, pp. 242-288, 2017.

[111]

G. Gallego, M. Hakkarainen and M. Pilar Almajano, "Stability of O/W emulsions packed with PLA film with incorporated rosemary and thyme," European Food Research and Technology, vol. 243, no. 7, pp. 1249-1259, 2017.

[112]

D. Wu, E. Bäckström and M. Hakkarainen, "Starch Derived Nanosized Graphene Oxide Functionalized Bioactive Porous Starch Scaffolds," Macromolecular Bioscience, vol. 17, no. 6, 2017.

[113]

D. Wu et al., "Starch-Derived Nanographene Oxide Paves the Way for Electrospinnable and Bioactive Starch Scaffolds for Bone Tissue Engineering," Biomacromolecules, vol. 18, no. 5, pp. 1582-1591, 2017.

[114]

A. S. Avalos, M. Hakkarainen and K. Odelius, "Superiorly Plasticized PVC/PBSA Blends through Crotonic and Acrylic Acid Functionalization of PVC," Polymers, vol. 9, no. 3, 2017.

[115]

J. Pal et al., "The viscoelastic interaction between dispersed and continuous phase of PCL/HA-PVA oil-in-water emulsion uncovers the theoretical and experimental basis for fiber formation during emulsion electrospinning," European Polymer Journal, vol. 96, pp. 44-54, 2017.

[116]

E. Backström, K. Odelius and M. Hakkarainen, "Trash to Treasure : Microwave-Assisted Conversion of Polyethylene to Functional Chemicals," Industrial & Engineering Chemistry Research, vol. 56, no. 50, pp. 14814-14821, 2017.

[117]

J. Duch et al., "Work function modifications of graphite surface via oxygen plasma treatment," Applied Surface Science, vol. 419, pp. 439-446, 2017.

[118]

N. Aminlashgari, M. Becerra and M. Hakkarainen, "Characterization of degradation fragments released by arc-induced ablation of polymers in air," Journal of Physics D : Applied Physics, vol. 49, no. 5, 2016.

[119]

H. Xu et al., "Conformational Footprint in Hydrolysis-Induced Nanofibrillation and Crystallization of Poly(lactic acid)," Biomacromolecules, vol. 17, no. 3, pp. 985-995, 2016.

[120]

D. Wu, H. Xu and M. Hakkarainen, "From starch to polylactide and nano-graphene oxide : fully starch derived high performance composites," RSC Advances, vol. 6, no. 59, pp. 54336-54345, 2016.

[121]

H. Xu et al., "Graphene Oxide-Driven Design of Strong and Flexible Biopolymer Barrier Films : From Smart Crystallization Control to Affordable Engineering," ACS Sustainable Chemistry and Engineering, vol. 4, no. 1, pp. 334-349, 2016.

[122]

H. Xu et al., "Immobilized Graphene Oxide Nanosheets as Thin but Strong Nanointerfaces in Biocomposites," ACS Sustainable Chemistry and Engineering, vol. 4, no. 4, pp. 2211-2222, 2016.

[123]

X. Yang et al., "Poly(lactide)-g-poly(butylene succinate-co-adipate) with High Crystallization Capacity and Migration Resistance," Materials, vol. 9, no. 5, 2016.

[124]

M. Michalak, M. Hakkarainen and A.-C. Albertsson, "Recycling Oxidized Model Polyethylene Powder as a Degradation Enhancing Filler for Polyethylene/Polycaprolactone Blends," ACS Sustainable Chemistry and Engineering, vol. 4, no. 1, pp. 129-135, 2016.

[125]

H. Xu et al., "Stereocontrolled Entanglement-Directed Self-Alignment of Poly(lactic acid) Cylindrites," Macromolecular Chemistry and Physics, vol. 217, no. 23, pp. 2567-2575, 2016.

[126]

L. Xie et al., "Structural Hierarchy and Polymorphic Transformation in Shear-Induced Shish-Kebab of Stereocomplex Poly(Lactic Acid)," Macromolecular rapid communications, vol. 37, no. 9, pp. 745-751, 2016.

[127]

S. Hassanzadeh et al., "Supramolecular Assembly of Biobased Graphene Oxide Quantum Dots Controls the Morphology of and Induces Mineralization on Poly(epsilon-caprolactone) Films," Biomacromolecules, vol. 17, no. 1, pp. 256-261, 2016.

[128]

K. H. Adolfsson et al., "Zero-Dimensional and Highly Oxygenated Graphene Oxide for Multifunctional Poly(lactic acid) Bionanocomposites," ACS Sustainable Chemistry and Engineering, vol. 4, no. 10, pp. 5618-5631, 2016.

[129]

S. Hassanzadeh et al., "A proof-of-concept for folate-conjugated and quercetin-anchored pluronic mixed micelles as molecularly modulated polymeric carriers for doxorubicin," Polymer, vol. 74, pp. 193-204, 2015.

[130]

H. Xu, L. Xie and M. Hakkarainen, "Beyond a Model of Polymer Processing-Triggered Shear : Reconciling Shish-Kebab Formation and Control of Chain Degradation in Sheared Poly(L-lactic acid)," ACS Sustainable Chemistry and Engineering, vol. 3, no. 7, pp. 1443-1452, 2015.

[131]

S. Hassanzadeh, K. H. Adolfsson and M. Hakkarainen, "Controlling the cooperative self-assembly of graphene oxide quantum dots in aqueous solutions," RSC Advances, vol. 5, no. 71, pp. 57425-57432, 2015.

[132]

N. Aminlashgari et al., "Degradation product profiles of melt spun in situ cross-linked poly(epsilon-caprolactone) fibers," Materials Chemistry and Physics, vol. 156, pp. 82-88, 2015.

[133]

A. Meszynska et al., "Effect of Oligo-Hydroxyalkanoates on Poly(3-Hydroxybutyrate-co-4-Hydroxybutyrate)-Based Systems," Macromolecular materials and engineering, vol. 300, no. 6, pp. 661-666, 2015.

[134]

M. Golda-Cepa et al., "Microbiological investigations of oxygen plasma treated parylene C surfaces for metal implant coating," Materials science & engineering. C, biomimetic materials, sensors and systems, vol. 52, pp. 273-281, 2015.

[135]

S. Hassanzadeh, N. Aminlashgari and M. Hakkarainen, "Microwave-Assisted Recycling of Waste Paper to Green Platform Chemicals and Carbon Nanospheres," ACS Sustainable Chemistry and Engineering, vol. 3, no. 1, pp. 177-185, 2015.

[136]

X. Yang and M. Hakkarainen, "Migration resistant glucose esters as bioplasticizers for polylactide," Journal of Applied Polymer Science, vol. 132, no. 18, 2015.

[137]

D. Wu and M. Hakkarainen, "Recycling PLA to multifunctional oligomeric compatibilizers for PLA/starch composites," European Polymer Journal, vol. 64, pp. 126-137, 2015.

[138]

S. Hassanzadeh et al., "Release of quercetin from micellar nanoparticles with saturated and unsaturated core forming polyesters - A combined computational and experimental study," Materials science & engineering. C, biomimetic materials, sensors and systems, vol. 46, pp. 417-426, 2015.

[139]

H. Xu et al., "Thermostable and impermeable "nano-barrier walls" constructed by poly(lactic acid) stereocomplex crystal decorated graphene oxide nanosheets," Macromolecules, vol. 48, no. 7, pp. 2127-2137, 2015.

[140]

X. Yang et al., "Two step extrusion process : From thermal recycling of PHB to plasticized PLA by reactive extrusion grafting of PHB degradation products onto PLA chains," Macromolecules, vol. 48, no. 8, pp. 2509-2518, 2015.

[141]

K. H. Adolfsson, S. Hassanzadeh and M. Hakkarainen, "Valorization of cellulose and waste paper to graphene oxide quantum dots," RSC Advances, vol. 5, no. 34, pp. 26550-26558, 2015.

[142]

D. Wu and M. Hakkarainen, "A Closed-Loop Process from Microwave-Assisted Hydrothermal Degradation of Starch to Utilization of the Obtained Degradation Products as Starch Plasticizers," ACS Sustainable Chemistry and Engineering, vol. 2, no. 9, pp. 2172-2181, 2014.

[143]

S. Hassanzadeh, N. Aminlashgari and M. Hakkarainen, "Chemo-selective high yield microwave assisted reaction turns cellulose to green chemicals," Carbohydrate Polymers, vol. 112, pp. 448-457, 2014.

[144]

P. K. Roy, M. Hakkarainen and A.-C. Albertsson, "Exploring the Biodegradation Potential of Polyethylene Through a Simple Chemical Test Method," Journal of Polymers and the Environment, vol. 22, no. 1, pp. 69-77, 2014.

[145]

B. Yin et al., "Glucose esters as biobased PVC plasticizers," European Polymer Journal, vol. 58, pp. 34-40, 2014.

[146]

B. Yin and M. Hakkarainen, "Green Plasticizers from Liquefied Wood," Waste and Biomass Valorization, vol. 5, no. 4, pp. 651-659, 2014.

[147]

M. Golda-Cepa et al., "LDI-MS examination of oxygen plasma modified polymer for designing tailored implant biointerfaces," RSC Advances, vol. 4, no. 50, pp. 26240-26243, 2014.

[148]

X. Yang, K. Odelius and M. Hakkarainen, "Microwave-Assisted Reaction in Green Solvents Recycles PHB to Functional Chemicals," ACS Sustainable Chemistry and Engineering, vol. 2, no. 9, pp. 2198-2203, 2014.

[149]

Y. Bor, J. Alin and M. Hakkarainen, "Polylactide stereocomplexation leads to reduced migration during microwave heating in contact with food simulants," Journal of Food Engineering, vol. 134, pp. 1-4, 2014.

[150]

H. Xu et al., "Structural Basis for Unique Hierarchical Cylindrites Induced by Ultrahigh Shear Gradient in Single Natural Fiber Reinforced Poly(lactic acid) Green Composites," Biomacromolecules, vol. 15, no. 5, pp. 1676-1686, 2014.

[151]

L. Momtazi et al., "Synthesis, characterization, and cellular uptake of magnetic nanocarriers for cancer drug delivery," Journal of Colloid and Interface Science, vol. 433, pp. 76-85, 2014.

[152]

J. Alin and M. Hakkarainen, "Combined Chromatographic and Mass Spectrometric Toolbox for Fingerprinting Migration from PET Tray during Microwave Heating," Journal of Agricultural and Food Chemistry, vol. 61, no. 6, pp. 1405-1415, 2013.

[153]

N. Aminlashgari et al., "Degradation profile and preliminary clinical testing of a resorbable device for ligation of blood vessels," Acta Biomaterialia, vol. 9, no. 6, pp. 6898-904, 2013.

[154]

B. Yin and M. Hakkarainen, "Flexible and strong ternary blends of poly(vinyl chloride), poly(butylene adipate)and nanoparticle-plasticizers," Materials Chemistry and Physics, vol. 139, no. 2-3, pp. 734-740, 2013.

[155]

X. Yang, A. Finne-Wistrand and M. Hakkarainen, "Improved dispersion of grafted starch granules leads to lower water resistance for starch-g-PLA/PLA composites," Composites Science And Technology, vol. 86, pp. 149-156, 2013.

[156]

E. Azwar, B. Yin and M. Hakkarainen, "Liquefied biomass derived plasticizer for polylactide," Journal of chemical technology and biotechnology (1986), vol. 88, no. 5, pp. 897-903, 2013.

[157]

S. Regnell Andersson, M. Hakkarainen and A.-C. Albertsson, "Stereocomplexation between PLA-like substituted oligomers and the influence on the hydrolytic degradation," Polymer, vol. 54, no. 16, pp. 4105-4111, 2013.

[158]

S. R. Regnell Andersson et al., "Customizing the Hydrolytic Degradation Rate of Stereocomplex PLA through Different PDLA Architectures," Biomacromolecules, vol. 13, no. 4, pp. 1212-1222, 2012.

[159]

Y. Bor, J. Alin and M. Hakkarainen, "Electrospray Ionization-Mass Spectrometry Analysis Reveals Migration of Cyclic Lactide Oligomers from Polylactide Packaging in Contact with Ethanolic Food Simulant," Packaging technology & science, vol. 25, no. 7, pp. 427-433, 2012.

[160]

M. Hakkarainen, "Electrospray Ionization-Mass Spectrometry for Molecular Level Understanding of Polymer Degradation," Advances in Polymer Science, vol. 248, pp. 175-204, 2012.

[161]

N. Aminlashgari and M. Hakkarainen, "Emerging Mass Spectrometric Tools for Analysis of Polymers and Polymer Additives," Advances in Polymer Science, vol. 248, pp. 1-38, 2012.

[162]

S. Regnell Andersson, M. Hakkarainen and A.-C. Albertsson, "Long-term properties and migration of low molecular mass compounds from modified PLLA materials during accelerated ageing," Polymer degradation and stability, vol. 97, no. 6, pp. 914-920, 2012.

[163]

J. Alin and M. Hakkarainen, "Migration from polycarbonate packaging to food simulants during microwave heating," Polymer degradation and stability, vol. 97, no. 8, pp. 1387-1395, 2012.

[164]

P. K. Roy, M. Hakkarainen and A.-C. Albertsson, "Nanoclay effects on the degradation process and product patterns of polylactide," Polymer degradation and stability, vol. 97, no. 8, pp. 1254-1260, 2012.

[165]

E. Azwar, E. Vuorinen and M. Hakkarainen, "Pyrolysis-GC-MS reveals important differences in hydrolytic degradation process of wood flour and rice bran filled polylactide composites," Polymer degradation and stability, vol. 97, no. 3, pp. 281-287, 2012.

[166]

N. Aminlashgari and M. Hakkarainen, "Surface Assisted Laser Desorption Ionization-Mass Spectrometry (SALDI-MS) for Analysis of Polyester Degradation Products," Journal of the American Society for Mass Spectrometry, vol. 23, no. 6, pp. 1071-1076, 2012.

[167]

E. Azwar and M. Hakkarainen, "Tuning the mechanical properties of tapioca starch by plasticizers, inorganic and agro-waste derived fillers," Polymer science, vol. 2012, no. Article ID 463298, 2012.

[168]

B. Yin and M. Hakkarainen, "Core-shell nanoparticle-plasticizers for design of high-performance polymeric materials with improved stiffness and toughness," Journal of Materials Chemistry, vol. 21, no. 24, pp. 8670-8677, 2011.

[169]

P. K. Roy et al., "Degradable Polyethylene : Fantasy or Reality," Environmental Science and Technology, vol. 45, no. 10, pp. 4217-4227, 2011.

[170]

S. Inkinen et al., "From Lactic Acid to Poly(lactic acid) (PLA) : Characterization and Analysis of PLA and Its Precursors," Biomacromolecules, vol. 12, no. 3, pp. 523-532, 2011.

[171]

S. Dånmark et al., "In vitro and in vivo degradation profile of aliphatic polyesters subjected to electron beam sterilization," ACTA BIOMATERIALIA, vol. 7, no. 5, pp. 2035-2046, 2011.

[172]

J. Alin and M. Hakkarainen, "Microwave heating causes rapid degradation of antioxidants in polypropylene packaging leading to greatly increased specific migration to food simulants as shown by ESI-MS and GC-MS," Journal of Agricultural and Food Chemistry, vol. 59, no. 10, pp. 5418-5427, 2011.

[173]

N. Aminlashgari et al., "Nanocomposites as novel surfaces for laser desorption ionization mass spectrometry," Analytical Methods, vol. 3, no. 1, pp. 192-197, 2011.

[174]

B. Yin and M. Hakkarainen, "Oligomeric Isosorbide Esters as Alternative Renewable Resource Plasticizers for PVC," Journal of Applied Polymer Science, vol. 119, no. 4, pp. 2400-2407, 2011.

[175]

K. Odelius et al., "Porosity and Pore Size Regulate the Degradation Product Profile of Polylactide," Biomacromolecules, vol. 12, no. 4, pp. 1250-1258, 2011.

[176]

E. Vuorinen and M. Hakkarainen, "Method development for the analysis of biodegradable polymers," International Journal of Metrology and Quality Engineering, vol. 1, no. 1, pp. 29-32, 2010.

[177]

A. Höglund, M. Hakkarainen and A.-C. Albertsson, "Migration and Hydrolysis of Hydrophobic Polylactide Plasticizer," Biomacromolecules, vol. 11, no. 1, pp. 277-283, 2010.

[178]

M. Hakkarainen, "Multiple headspace single-drop micro-extraction for quantitative determination of lactide in thermally-oxidized polylactide," Polymer degradation and stability, vol. 95, no. 3, pp. 270-273, 2010.

[179]

S. Regnell Andersson et al., "Polylactide Stereocomplexation Leads to Higher Hydrolytic Stability but More Acidic Hydrolysis Product Pattern," Biomacromolecules, vol. 11, no. 4, pp. 1067-1073, 2010.

[180]

A. Höglund et al., "Surface Modification Changes the Degradation Process and Degradation Product Pattern of Polylactide," Langmuir, vol. 26, no. 1, pp. 378-383, 2010.

[181]

S. Regnell Andersson, M. Hakkarainen and A.-C. Albertsson, "Tuning the Polylactide Hydrolysis Rate by Plasticizer Architecture and Hydrophilicity without Introducing New Migrants," Biomacromolecules, vol. 11, no. 12, pp. 3617-3623, 2010.

[182]

J. Alin and M. Hakkarainen, "Type of Polypropylene Material Significantly Influences the Migration of Antioxidants from Polymer Packaging to Food Simulants During Microwave Heating," Journal of Applied Polymer Science, vol. 118, no. 2, pp. 1084-1093, 2010.

[183]

G. Adamus et al., "MALDI-TOF MS Reveals the Molecular Level Structures of Different Hydrophilic-Hydrophobic Polyether-esters," Biomacromolecules, vol. 10, no. 6, pp. 1540-1546, 2009.

[184]

M. Hakkarainen et al., "ESI-MS reveals the influence of hydrophilicity and architecture on the water-soluble degradation product patterns of biodegradable homo- and copolyesters of 1,5-dioxepan-2-one and epsilon-caprolactone," Macromolecules, vol. 41, no. 10, pp. 3547-3554, 2008.

[185]

A. Höglund et al., "Fingerprinting the degradation product patterns of different polyester-ether networks by electrospray ionization mass spectrometry," Journal of Polymer Science Part A : Polymer Chemistry, vol. 46, no. 13, pp. 4617-4629, 2008.

[186]

M. Hakkarainen, "Migration of monomeric and polymeric PVC plasticizers," Advances in Polymer Science, vol. 211, pp. 159-185, 2008.

[187]

M. Hakkarainen, "Solid phase microextraction for analysis of polymer degradation products and additives : Renewable, Degradable and Recyclable," Advances in Polymer Science, vol. 211, no. 1, pp. 23-50, 2008.

[188]

A. Höglund et al., "Controllable Degradation Product Migration from Cross-Linked Biomedical Polyester-Ethers through Predetermined Alterations in Copolymer Composition," Biomacromolecules, vol. 8, no. 6, pp. 2025-2032, 2007.

[189]

A. Höglund, M. Hakkarainen and A.-C. Albertsson, "Degradation profile of poly(epsilon-caprolactone) - the influence of macroscopic and macromolecular biomaterial design," Journal of macromolecular science. Pure and applied chemistry (Print), vol. 44, no. 7-9, pp. 1041-1046, 2007.

[190]

A. Lindström and M. Hakkarainen, "Designed chain architecture for enhanced migration resistance and property preservation in poly(vinyl chloride)/polyester blends," Biomacromolecules, vol. 8, no. 4, pp. 1187-1194, 2007.

[191]

M. Hakkarainen, "Developments in multiple headspace extraction," Journal of Biochemical and Biophysical Methods, vol. 70, no. 2, pp. 229-233, 2007.

[192]

A. Lindström and M. Hakkarainen, "Migration-resistant polymeric plasticizer for poly(vinyl chloride)," Journal of Applied Polymer Science, vol. 104, no. 4, pp. 2458-2467, 2007.

[193]

A. Lindström and M. Hakkarainen, "Miscibility and surface segregation in PVC/polyester blends : the influence of chain architecture and composition," Journal of Polymer Science Part B : Polymer Physics, vol. 45, no. 13, pp. 1552-1563, 2007.

[194]

M. Hakkarainen et al., "Tuning the release rate of acidic degradation products through macromolecular design of caprolactone-based copolymers," Journal of the American Chemical Society, vol. 129, no. 19, pp. 6308-6312, 2007.

[195]

A.-C. Albertsson, M. Groning and M. Hakkarainen, "Emission of volatiles from polymers - A new approach for understanding polymer degradation," Journal of Polymers and the Environment, vol. 14, no. 1, pp. 8-13, 2006.

[196]

A. Lindström and M. Hakkarainen, "Environmentally friendly plasticizers for poly(vinyl chloride)- Improved mechanical properties and compatibility by using branched poly(butylene adipate) as a polymeric plasticizer," Journal of Applied Polymer Science, vol. 100, no. 3, pp. 2180-2188, 2006.

[197]

P. Plikk et al., "Finalizing the properties of porous scaffolds of aliphatic polyesters through radiation sterilization," Biomaterials, vol. 27, no. 31, pp. 5335-5347, 2006.

[198]

E. Hansson and M. Hakkarainen, "Multiple headspace single-drop microextraction - a new technique for quantitative determination of styrene in polystyrene," Journal of Chromatography A, vol. 1102, no. 1-2, pp. 91-95, 2006.

[199]

M. Groning et al., "Phenolic prepreg waste as functional filter with antioxidant effect in polypropylene and polyamide-6," Polymer degradation and stability, vol. 91, no. 8, pp. 1815-1823, 2006.

[200]

M. Hakkarainen and A.-C. Albertsson, "Indicator products : A new tool for lifetime prediction of polymeric materials," Biomacromolecules, vol. 6, no. 2, pp. 775-779, 2005.

[201]

M. Gröning and M. Hakkarainen, "Correlation between emitted and total amount of 2-cyclopentyl-cyclopentanone in polyamide 6.6 allows rapid assessment by HS and HS-SPME under non-equilibrium conditions," Journal of Chromatography A, vol. 1052, no. 02-jan, pp. 151-159, 2004.

[202]

A. Lindström, A.-C. Albertsson and M. Hakkarainen, "Development of a solid-phase extraction method for simultaneous extraction of adipic acid, succinic acid and 1,4-butanediol formed during hydrolysis of poly(butylene adipate) and poly(butylene succinate," Journal of Chromatography A, vol. 1022, no. 1-2, pp. 171-177, 2004.

[203]

M. Groning and M. Hakkarainen, "Multiple headspace solid-phase microextraction of 2-cyclopentyl-cyclopentanone in polyamide 6.6 : possibilities and limitations in the headspace analysis of solid hydrogen-bonding matrices," Journal of Chromatography A, vol. 1052, no. 02-jan, pp. 61-68, 2004.

[204]

A. Lindström, A.-C. Albertsson and M. Hakkarainen, "Quantitative determination of degradation products an effective means to study early stages of degradation in linear and branched poly(butylene adipate) and poly(butylene succinate)," Polymer degradation and stability, vol. 83, no. 3, pp. 487-493, 2004.

[205]

M. Gröning, M. Hakkarainen and A.-C. Albertsson, "Recycling of glass fibre reinforced phenolic prepreg waste. part 1. Recovery and reuse of glass fibres in PP and PA6," Polymers & polymer composites, vol. 12, no. 6, pp. 491-500, 2004.

[206]

M. Gröning, M. Hakkarainen and A.-C. Albertsson, "Recycling of glass-fibre reinforced phenolic prepreg waste. Part 2. Milled prepreg as functional filler in PP and PA6," Polymers & polymer composites, vol. 12, no. 6, pp. 501-509, 2004.

[207]

M. Hakkarainen, A.-C. Albertsson and S. Karlsson, "Migration and emission of plasticizer and its degradation products during thermal aging of nitrite rubber," IJPAC. International journal of polymer analysis and characterization, vol. 8, no. 4, pp. 279-293, 2003.

[208]

M. Hakkarainen, "New PVC materials for medical applications - the release profile of PVC/polycaprolactone-polycarbonate aged in aqueous environments," Polymer degradation and stability, vol. 80, no. 3, pp. 451-458, 2003.

[209]

M. Hakkarainen, "Qualitative and quantitative solid-phase microextraction gas chromatographic-mass spectrometric determination of the low-molecular-mass compounds released from poly(vinyl chloride)/polycaprolactone-polycarbonate during ageing," Journal of Chromatography A, vol. 1010, no. 1, pp. 9-16, 2003.

[210]

M. Hakkarainen, M. Gröning and A.-C. Albertsson, "Solid-phase microextraction (SPME) in polymer characterization - Long-term properties and quality control of polymeric materials," Journal of Applied Polymer Science, vol. 89, no. 3, pp. 867-873, 2003.

[211]

M. Hakkarainen, "Aliphatic polyesters : Abiotic and biotic degradation and degradation products," Advances in Polymer Science, vol. 157, pp. 113-138, 2002.

[212]

M. Groning and M. Hakkarainen, "Headspace solid-phase microextraction with gas chromatography/mass spectrometry reveals a correlation between the degradation product pattern and changes in the mechanical properties during the thermooxidation of in-plant recycled polyamide 6,6," Journal of Applied Polymer Science, vol. 86, no. 13, pp. 3396-3407, 2002.

[213]

M. Hakkarainen and A.-C. Albertsson, "Heterogeneous biodegradation of polycaprolactone - Low molecular weight products and surface changes," Macromolecular Chemistry and Physics, vol. 203, no. 11-okt, pp. 1357-1363, 2002.

[214]

M. Gröning and M. Hakkarainen, "Headspace solid-phase microextraction - a tool for new insights into the long-term thermo-oxidation mechanism of polyamide 6.6," Journal of Chromatography A, vol. 932, no. 02-jan, pp. 1-11, 2001.

[215]

M. Hakkarainen, S. Karlsson and A.-C. Albertsson, "Influence of low molecular weight lactic acid derivatives on degradability of polylactide," Journal of Applied Polymer Science, vol. 76, no. 2, pp. 228-239, 2000.

[216]

M. Hakkarainen, S. Karlsson and A.-C. Albertsson, "Rapid (bio)degradation of polylactide by mixed culture of compost microorganisms - low molecular weight products and matrix changes," Polymer, vol. 41, no. 7, pp. 2331-2338, 2000.

[217]

A.-C. Albertsson et al., "Molecular weight changes and polymeric matrix changes correlated with the formation of degradation products in biodegraded polyethylene," Journal of environmental polymer degradation, vol. 64, pp. 91-99, 1999.

[218]

M. Hakkarainen, G. Gallet and S. Karlsson, "Prediction by multivariate data analysis of long-term properties of glassfiber reinforced polyester composites," Polymer degradation and stability, vol. 64, pp. 91-99, 1999.

[219]

S. Karlsson, M. Hakkarainen and A.-C. Albertsson, "Dicarboxylic acids and ketoacids formed in degradable polyethylenes by zip depolymerisation through a cyclic transition state," Macromolecules, vol. 30, pp. 7721-7728, 1997.

[220]

M. Hakkarainen, A.-C. Albertsson and S. Karlsson, "Solid phase microextraction (SPME) as an effective means to isolate degradation products in polymers," Journal of environmental polymer degradation, vol. 5, pp. 67-73, 1997.

[221]

M. Hakkarainen, A.-C. Albertsson and S. Karlsson, "Susceptibility of starch-filled and starch-based LDPE to oxygen in water and air," Journal of Applied Polymer Science, vol. 66, pp. 959-967, 1997.

[222]

D. Ramkumar et al., "Properties of injection moulded starch/synthetic polymer blends-I. Effect of processing parameters on physical properties," European Polymer Journal, vol. 32, pp. 999-1010, 1996.

[223]

M. Hakkarainen, A.-C. Albertsson and S. Karlsson, "Solid-phase extraction and subsequent gas-chromatography-mass spectrometry analysis for identification of complex mixtures of degradation products in starch-based polymers," Journal of Chromatography A, vol. 741, pp. 251-263, 1996.

[224]

M. Hakkarainen, A.-C. Albertsson and S. Kalrsson, "Weight losses and molecular weight changes correlated with the evolution of hydroxyacids in simulated in vivo degradation of homo-and copolymers of PLA and PGA," Polymer degradation and stability, vol. 52, pp. 283-291, 1996.

[225]

S. Karlsson, M. Hakkarainen and A.-C. Albertsson, "Identification by headspace gas chromatography-mass spectrometry of in vitro degradation products of homo-and copolymers of L- and D,L-lactide and 1,5-dioxepan-2-one," Journal of Chromatography A, vol. 688, pp. 251-259, 1994.

[226]

M. Hakkarainen, R. Jansson and F. Sundholm, "Liquid-Crystalline Behavior Of Some Carboxylic-Acids," Polymer Bulletin, vol. 31, no. 1, pp. 43-48, 1993.

Kapitel i böcker

[227]

M. Hakkarainen and A.-C. Albertsson, "Degradation products of aliphatic and aliphatic-aromatic polyesters," in Chromatography For Sustainable Polymeric Materials : Renewable, Degradable And Recyclable, BERLIN : SPRINGER-VERLAG, 2008, pp. 85-116.

[228]

L. Burman, A.-C. Albertsson and M. Hakkarainen, "Indicator products and chromatographic fingerprinting : New tools for degradation state and lifetime estimation," in CHROMATOGRAPHY FOR SUSTAINABLE POLYMERIC MATERIALS: RENEWABLE, DEGRADABLE AND RECYCLABLE, Berlin : Springer Verlag, 2008, pp. 1-22.

[229]

M. Gröning, M. Hakkarainen and A.-C. Albertsson, "Quantitative determination of volatiles in polymers and quality control of recycled materials by static headspace techniques," in CHROMATOGRAPHY FOR SUSTAINABLE POLYMERIC MATERIALS: RENEWABLE, DEGRADABLE AND RECYCLABLE, Berlin : Springer Verlag, 2008, pp. 51-84.

[230]

M. Hakkarainen, L. Burman and A.-C. Albertsson, "Chromatographic Analysis and Total Luminescence Intensity as Tools for Early Degradation Detection and Degradation State Estimation," in ACS Symposium Series : Degradable Polymers and Materials, Principles and Practice, Kishan Khemani and Carmen Scholz Ed., 1st ed. : American Chemical Society (ACS), 2006, pp. 307-319.

[231]

M. Hakkarainen and A.-C. Albertsson, "Environmental degradation of polyethylene," in LONG-TERM PROPERTIES OF POLYOLEFINS, , Berlin, 2004, pp. 177-199.

[232]

M. Hakkarainen and S. Karlsson, "Gas Chromatography in analysis of polymers and rubbers," in Encyclopedia of Analytical Chemistry, R.A. Meyers Ed., : John Wiley & Sons, 2000, pp. 7608-7623.

Icke refereegranskade

Artiklar

[233]

I. Carmagnola et al., "Photocurable Biopolymers as Tunable Materials for Personalized Scaffold Architecture Through Additive Manufacturing Techniques," Tissue Engineering. Part A, vol. 28, pp. S201-S201, 2022.

[234]

M. Hakkarainen, "Carbon dots as bioactivity inducers in polymeric biomaterials," Abstracts of Papers of the American Chemical Society, vol. 257, 2019.

[235]

E. McGivney et al., "What happens to microplastics when they enter the sea : A two week characterization study," Abstracts of Papers of the American Chemical Society, vol. 257, 2019.

[236]

M. Hakkarainen, "Carbonized biopolymers as building blocks in renewable materials," Abstracts of Papers of the American Chemical Society, vol. 256, 2018.

[237]

Y. Xu, K. Odelius and M. Hakkarainen, "Synthesis of bio-based and recyclable thermosets," Abstracts of Papers of the American Chemical Society, vol. 256, 2018.

[238]

D. Wu and M. Hakkarainen, "Closed-loop strategy for valorization of starch and poly (lactic acid) into new materials," Abstracts of Papers of the American Chemical Society, vol. 251, 2016.

[239]

H. Xu et al., "Enhancing the function of graphene oxide nanosheets by crystallization control : Unexpected harvest of strength, ductility and thermal stability for poly(lactic acid) barrier films," Abstracts of Papers of the American Chemical Society, vol. 251, 2016.

[240]

T. Pettersson et al., "Mixed micelles of chemically modified Pluronic as drug delivery system," Abstracts of Papers of the American Chemical Society, vol. 251, 2016.

[241]

Z. Feng et al., "Multifunctional cancer-targeting strategy for encapsulating doxorubicin by folate-onjugated and quercetin-anchored pluronic mixed micelle systems," Abstracts of Papers of the American Chemical Society, vol. 251, 2016.

[242]

N. Benyahia Erdal, K. H. Adolfsson and M. Hakkarainen, "Silicone-hydrogel bandage lenses used in conjunction with pharmaceutical eye drops : An uptake and release study," Abstracts of Papers of the American Chemical Society, vol. 251, 2016.

[243]

K. H. Adolfsson, S. Hassanzadeh and M. Hakkarainen, "Value-added carbon products attained through microwave assisted hydrothermal treatment of cellulose and waste paper," Abstracts of Papers of the American Chemical Society, vol. 251, 2016.

[244]

S. Regnell Andersson, M. Hakkarainen and A.-C. Albertsson, "PLA stereocomplexation governs the hydrolytic degradation process," Abstracts of Papers of the American Chemical Society, vol. 244, 2012.

[245]

N. Aminlashgari and M. Hakkarainen, "SALDI-MS for analysis of polyester degradation products," Abstracts of Papers of the American Chemical Society, vol. 244, 2012.

[246]

A.-C. Albertsson and M. Hakkarainen, "Degradable polymers and their interaction with the environment," Abstracts of Papers of the American Chemical Society, vol. 223, pp. 566-567, 2007.

[247]

A.-C. Albertsson, M. Gröning and M. Hakkarainen, "Chromatographic analysis as a tool for predicting material performance," Abstracts of Papers of the American Chemical Society, pp. 247-248, 2005.

Konferensbidrag

[248]

J. Alin and M. Hakkarainen, "The significant effect of polypropylene material on the migration of antioxidants from food container to food simulants," in Macro2010, The 43rd IUPAC World Polymer Congress, 2010.

Böcker

[249]

M. Hakkarainen and A. Finne-Wistrand, Update on polylactide based materials. 1st ed. Shawbury, Shrewsbury, Shropshire : iSmithers, 2011.

Kapitel i böcker

[250]

A. Finne Wistrand and M. Hakkarainen, "Polylactide : ," in Handbook of Engineering and Speciality Thermoplastics : Polyethers and Polyesters, S. Thomas and V. P.M. Ed., Hoboken, NJ, USA : John Wiley & Sons, 2011, pp. 349-376.