Publications by Tianxiang Wang
Peer reviewed
Articles
[1]
M. Debertolis et al., "Analytical, experimental and numerical investigation on full-scale glulam trusses joined through birch plywood gusset plates," Journal of Building Engineering, vol. 113, 2025.
[2]
Y. Wang et al., "Compare EN 383 and ASTM D5764 on the embedment properties of plywood : Influence of test setups, specimen geometry, and loading procedures," Construction and Building Materials, vol. 490, 2025.
[3]
T. Wang et al., "Innovative timber connection systems with the combination of indoor adhesive application and on-site adhesive-free assembly," Engineering structures, vol. 342, 2025.
[4]
Y. Wang et al., "Plywood gussets in mechanical timber connections : quantify the stress spread angles under major tension loads," European Journal of Wood and Wood Products, vol. 83, no. 4, 2025.
[5]
Y. Wang et al., "Rebars as alternatives for smooth dowels in timber connections: An experimental, analytical and numerical study," Engineering structures, vol. 343, 2025.
[6]
M. Debertolis et al., "Rope effect in mechanical panel-timber connections: A comparison between screws and dowels," Engineering structures, vol. 332, 2025.
[7]
T. Wang et al., "Bonding strength between spruce glulam and birch plywood at different load-to-plywood face grain angles," European Journal of Wood and Wood Products, vol. 82, no. 5, pp. 1407-1419, 2024.
[8]
Y. Wang et al., "Design of birch plywood as gusset plates in timber-timber uniaxial tension connections : Influence of fastener pattern, face grain orientation, and discussions based on the Whitmore effective width theory," Journal of Building Engineering, vol. 86, 2024.
[9]
H. Yang et al., "Distributed electrified heating for efficient hydrogen production," Nature Communications, vol. 15, no. 1, 2024.
[10]
Y. Wang et al., "Effect of moisture on the edgewise flexural properties of acetylated and unmodified birch plywood : a comparison of strength, stiffness and brittleness properties," European Journal of Wood and Wood Products, vol. 82, no. 2, pp. 341-355, 2024.
[11]
T. Wang et al., "Glulam beams adhesively bonded by birch plywood plates in moment-resisting beam-to-beam connections," Engineering structures, vol. 302, pp. 117471, 2024.
[12]
Y. Wang et al., "Glulam frame corner joints built of birch plywood and mechanical fasteners: An experimental, analytical, and numerical study," Engineering structures, vol. 310, 2024.
[13]
T. Wang et al., "Spreading angle analysis on the tensile capacities of birch plywood plates in adhesively bonded timber connections," Engineering structures, vol. 315, 2024.
[14]
T. Wang et al., "Adhesively bonded joints between spruce glulam and birch plywood for structural applications: experimental studies by using different adhesives and pressing methods," Wood Material Science & Engineering, vol. 18, no. 3, pp. 1141-1150, 2023.
[15]
Y. Wang et al., "Birch plywood as gusset plates in glulam frame via mechanical connectors : A combined experimental and numerical study," Journal of Building Engineering, vol. 65, pp. 105744, 2023.
[16]
Y. Wang et al., "Embedment behavior of dowel-type fasteners in birch plywood : Influence of load-to-face grain angle, test set-up, fastener diameter, and acetylation," Construction and Building Materials, vol. 384, 2023.
[17]
Y. Wang et al., "Testing and analysis of screw-connected moment joints consisting of glued-laminated timbers and birch plywood plates," Engineering structures, vol. 290, 2023.
[18]
Y. Wang et al., "Experimental investigation on mechanical properties of acetylated birch plywood and its angle-dependence," Construction and Building Materials, vol. 344, pp. 128277, 2022.
[19]
T. Wang et al., "In-plane mechanical properties of birch plywood," Construction and Building Materials, vol. 340, 2022.
[20]
T. Wang et al., "Influence of face grain angle, size, and moisture content on the edgewise bending strength and stiffness of birch plywood," Materials & design, vol. 223, pp. 111227, 2022.
[21]
T. Wang et al., "An innovative timber-steel hybrid beam consisting of glulam mechanically reinforced by means of steel rod : Analytical and preliminary numerical investigations," Journal of Building Engineering, vol. 43, 2021.
Conference papers
[22]
T. Wang et al., "Glulam Frames Adhesively Bonded by Means of Birch Plywood Plates : Preliminary Investigations," in 13th World Conference on Timber Engineering, WCTE 2023, 2023, pp. 1453-1461.
[23]
M. Debertolis et al., "Investigation on mechanical connections with birch plywood gusset plates," in 19th Annual Meeting of the Northern European Network for Wood Science and Engineering, 2023, pp. 96-98.
[24]
Y. Wang et al., "Preliminary experimental investigations on frame corner joints built of glulam beams, birch plywood via mechanical connectors," in 19th Annual Meeting of the Northern European Network for Wood Science and Engineering, 2023.
[25]
Y. Wang et al., "Effect of moisture content on the angle-dependent edgewise flexural properties of unmodified and acetylated birch plywood," in Proceedings of the 18th Annual Meeting of the Northern European Network for Wood Science and Engineering (WSE), 2022.
[26]
T. Wang et al., "In-plane load-to-grain angle dependency of the compressive behavior of birch plywood," in CEM·2022 19th International Conference on Experimental Mechanics 17-21Jul 2022, Kraków, Poland, 2022.
[27]
Y. Wang et al., "Experimental study on an innovative timber-steel hybrid system," in Proceedings of the 17th Annual Meeting of the Northern European Network for Wood Science and Engineering, 2021, pp. 152-154.
[28]
Y. Wang et al., "Mechanical properties of acetylaetd birch plywood loaded parallel to the face grain," in World Conference on Timber Engineering 2021, WCTE 2021, 2021.
[29]
Y. Wang et al., "Mechanical properties of acetylated birch plywood loaded parallel to the face grain," in World Conference on Timber Engineering WCTE2021, 2021.
[30]
T. Wang et al., "Multiple shear plane timber connections with birch plywood and dowel-type fasteners," in Proceedings of the 17th Annual Meeting of the Northern European Network for Wood Science and Engineering (WSE 2021), 2021.
[31]
Y. Wang et al., "Numerical investigations on an innovative timber-steel hybrid system," in Proceedings of the 16th Annual Meeting of the Northern European Network for Wood Science and Engineering – WSE2020, 2020, pp. 92-94.
Non-peer reviewed
Conference papers
[32]
T. Wang et al., "The Embedment Behavior of Acetylated and Unmodified Birch Plywood," in Proceedings of the Tenth European Conference on Wood Modification, 2022.
[33]
T. Wang et al., "Prediction of the tensile strength of birch plywood at varying angles to grain," in Proceedings of the 16th Annual Meeting of the Northern European Network for Wood Science and Engineering - WSE2020, 2020, pp. 80-82.
Theses
[34]
T. Wang, "In-plane mechanical properties of birch plywood and its performance in adhesively bonded connections," Doctoral thesis Stockholm : KTH Royal Institute of Technology, TRITA-ABE-DLT, 244, 2024.
[35]
T. Wang, "On the in-plane mechanical properties of birch plywood," Licentiate thesis Stockholm : KTH Royal Institute of Technology, TRITA-ABE-DLT, 2247, 2022.
Other
[36]
M. Debertolis et al., "Analytical, experimental and numerical investigation on full-scale glulam trusses joined through birch plywood gusset plates," (Manuscript).
[37]
T. Wang et al., "Bonding strength between spruce glulam and birch plywood at different load-to-plywood face grain angles," (Manuscript).
[38]
[39]
[40]
T. Wang et al., "Spreading angle analysis on the tensile capacities of birch plywood plates in adhesively bonded timber connections," (Manuscript).
Latest sync with DiVA:
2025-10-06 22:42:20 UTC