Skip to main content
To KTH's start page

Effective Charging Infrastructure Planning through Route- and Network-Based Methods and Decision Support

Time: Thu 2026-12-10 14.00

Location: Kollegiesalen, Brinellvägen 8, Stockholm

Video link: https://kth-se.zoom.us/j/65493868392

Language: English

Subject area: Geodesy and Geoinformatics, Geoinformatics

Doctoral student: Ehsan Saqib , Geoinformatik, KTH Royal Institute Of Technology

Opponent: Professor Sonia Yeh, Chalmers University of Technology.

Supervisor: Professor Yifang Ban, Geoinformatik; Associate professor Gyözö Gidofalvi, Geoinformatik

Export to calendar

QC 20261118

Abstract

The successful decarbonization of road transportation via electrification hinges on the efficient rollout of well-designed charging infrastructure. However, charging infrastructure planning is complicated by evolving and uncertain transport electrification conditions, including changes in transport and charging demand, technology, grid capacity, real-estate availability, policies, and competition. To address these planning challenges, the aim of this PhD research is to develop and evaluate route- and network-based methods and decision support for effective charging infrastructure planning.

The thesis argues for the need to adopt a demand-centric charging-network design in which transport route information provides the basis for evaluating charging-network designs. To this end, the thesis formalizes a data-driven transport electrification scenario model and an incremental charging-network placement problem. The thesis develops greedy network-expansion methods that use static or dynamically recomputed route- and network-dependent charging demand estimates to guide the incremental placement of charging infrastructure. The proposed Route-Based Network Demand (RBND) method dynamically recomputes route-based network demand through transport electrification simulations during greedy network expansion, while candidate pruning and top-n limited search reduce the number of computationally expensive candidate evaluations. Empirical evaluations show that RBND achieves the highest total network demand across the evaluated scenarios and, under the most challenging initial state-of-charge scenario, enables approximately 82% of transport routes and 83% of transport work, compared with approximately 54% and 64%, respectively, achieved by the best-performing baseline methods for the corresponding objectives. Candidate pruning eliminates approximately 95% of costly simulation evaluations, enabling the generation of a national-scale 200-station charging network from over one million candidate network expansions in under 15 minutes.

The RBND placement method is extended to mixed charging infrastructure comprising charging stations for static charging and Electric Road Systems (ERS) segments for dynamic charging, with infrastructure placement based on the marginal benefit-cost difference. The extended method is evaluated across scenarios varying in infrastructure type and size, battery range, charging rate, and route-data composition. The results show that station-based networks consistently achieve higher cost-efficiency and electrification across the evaluated scenarios, while ERS segments enable more frequent charging sessions but exhibit lower economic performance due to higher infrastructure costs and limited in-motion energy transfer. Spatially, station-based infrastructure is typically located farther from city centers, whereas ERS segments tend to be located closer to them.

Beyond charging-network placement, the thesis develops a quantitative methodology for assessing the robustness and resilience of charging-network designs to charging-station failures. Building on the route- and network-based analytical foundation, the methodology introduces complementary structural- and capacity-redundancy measures. Structural redundancy assesses charging-network robustness by quantifying the ability to preserve route feasibility under charging-station failures, whereas capacity redundancy assesses resilience by quantifying the additional charging capacity required to accommodate redistributed charging demand and recover within specified service conditions. The methodology is evaluated across charging networks of different sizes under single- and localized multi-station failures, considering different backlog clearance horizons (maximum system stress durations) and stochastic temporal charging-demand realizations. The results show that structural redundancy exceeds 98% across charging networks of 80--200 stations under single-station failures and increases from approximately 86% to 99% under localized multi-station failures as the network size grows. Unlike structural redundancy, capacity redundancy exhibits a non-monotonic response to charging-network expansion, remaining low under single-station failures but reaching approximately 16--22% under localized multi-station failures for a backlog clearance horizon of 6 hours, with corresponding average waiting times of 26--35 minutes. Congestion-aware operational charging-demand redistribution reduces baseline charging infrastructure requirements and average waiting times under localized charging-station failures. Although such redistribution increases the percentage of extra chargers required to maintain the same backlog clearance horizon, the total number of chargers required under failures remains lower across all evaluated scenarios.

To support charging infrastructure planning under deep uncertainties, the thesis develops and evaluates a data-driven Spatial Decision Support System (SDSS) with application-specific adaptations that incorporates charging-network placement methods within a dynamic adaptive planning approach. The SDSS supports the interactive exploration of alternative scenarios, parameters, and charging-network designs, allowing network plans to be evaluated and incrementally adapted as planning conditions, uncertainties, and stakeholder constraints evolve. The SDSS was developed and qualitatively evaluated through co-creation and feedback involving 33 stakeholder organizations, demonstrating the usefulness of demand-centric and dynamic adaptive planning for charging infrastructure.

Taken together, these contributions establish a common analytical foundation for charging infrastructure planning, based on route- and network-dependent charging demand. Building on this foundation, the thesis provides complementary methods and decision-support capabilities for incremental charging infrastructure network placement, robustness and resilience assessment, and dynamic adaptive planning under deep uncertainties. These contributions collectively support the effective planning of charging infrastructure under evolving transport electrification conditions.

Link to DiVA