Skip to main content
Logo hero-m 2i

Master Theses

  1. Tom Beuther, Simulation of coarsening in cemented carbides during liquid phase sintering, March 2018.
  2. Johan Frisk, Simulation of precipitation in FeCrC, November 2018.
  3. Sen Li, “Deformation-induced martensite in austenitic and duplex stainless steels”, 2016.
  4. Amelie Eriksson, “Finding a new Material for face grooving tools”, 2014, performed at Sandvik Coromant. Materials Science and Engineering, KTH
  5. Chunxin Liu, “Alternative Binder Phases for WC Cemented Carbides”, 2015, performed at Sandvik Coromant. Materials Science and Engineering, KTH
  6. Martin Walbrühl, “Diffusion in the liquid Co binder of cemented carbides”, 2014, performed at Sandvik Coromant. Materials Science and Engineering, KTH
  7. Malin Olsson, “Thermodynamic modeling of the stacking fault energy in austenitic stainless steels”, 2014, performed at Sandvik Materials Technology and at Materials Science and Engineering, KTH
  8. Navid Kanqouei, “Study of Equilibrium State in Fe-Mn-Al-C Alloys”, 2014, Materials Science and Engineering, KTH
  9. Oskar Larsson, “Fe-based Amorphous Powder for Soft-Magnetic Composites", 2013, performed at Höganäs. Materials Science and Engineering, KTH
  10. Muhammad Owais, “Impact of pressure on sintering of cemented carbide”, 2013, performed at Sandvik Coromant. Materials Science and Engineering, KTH*
  11. Johanna Salomonsson, “Effect of pre-alloyed WC with Tantalum and Chromium”, 2012, performed at Sandvik Mining, Materials Science and Engineering, KTH
  12. Fei Huyan, “A study of "475°C embrittlement" in Fe-20Cr and Fe-20Cr-X (X=Ni, Cu, Mn) alloys”, 2012, Materials Science and Engineering, KTH
  13. Saad Sheikh, “Effect of microstructure on toughness characteristics of cutting materials, 2012, performed at Seco Tools, Materials Science and Engineering, KTH*
  14. Fredrik Josefsson, ”Development of a quantitative method for grain size measurement using EBSD : and Comparison of WC-Co materials produced with different production methods”, 2012, performed at Sandvik Coromant. Materials Science and Engineering, KTH
  15. Krishna Praveen Jonnalagadda, “Influence of Graphite type on copper diffusion in P/M copper steels” 2012, Materials Science and Engineering, KTH, Stockholm, Sweden *
  16. Chanachon Techaboonanek, ”Precipitation during tempering of martensite in Fe-Cr-C alloys”, 2012, Materials Science and Engineering, KTH, Stockholm, Sweden.
  17. Yi-Yao Lu, “Theoretical and experimental study of the Cr-Co-Mo system”, Master thesis, KTH, Stockholm, Sweden (2011).
  18. Bartek Kaplan, Impact of process parameters on gradient cemented carbide inserts for rock drilling, Master thesis, KTH, Stockholm, Sweden (2011).
  19. Bonnie Lindahl, Equilibrium study of chromium containing cemented carbides, Master thesis, KTH, Stockholm, Sweden (2011).
  20. Sammy Toujani, “A study of the eutectoid transformations in Fe-1mass%C-1mass%Cr and Fe-0.15mass%C-4mass%Cr steels”, Master thesis, KTH, Stockholm, Sweden (2011).
  21. Arshad Muhammad Shahid, “Transport and Magnetic properties of BMG alloy ribbons”, Master thesis, KTH, Stockholm, Sweden (2011).
  22. Zulfiqar Hussain Shah, “Synthesis and Characterization of Fe-based Metallic Glass Alloys”, Master thesis, KTH, Stockholm, Sweden (2011).
  23. Saeed Baghsheikhi, “Spinodal decomposition in the binary Fe-Cr system”, Master Thesis, KTH, Stockholm, Sweden (2010).
  24. Reza Naraghi, “Martensitic transformation in austenitic stainless steels”, Master thesis, KTH, Stockholm, Sweden (2010).
  25. Tomas Albertsson, “Influence of cobolt on the 475°C embrittlement”, Master thesis, KTH, Stockholm, Sweden (2010).
  26. Ida Borgh, “Impact of nitrogen pressure on the carbonitride composition”, Master thesis, KTH, Stockholm, Sweden (2009).