Skip to main content
Till KTH:s startsida Till KTH:s startsida

Publications by Torbjörn Pettersson

Peer reviewed

Articles

[4]
M. Marcioni et al., "Layer-by-Layer-Coated Cellulose Fibers Enable the Production of Porous, Flame-Retardant, and Lightweight Materials," ACS Applied Materials and Interfaces, vol. 15, no. 30, pp. 36811-36821, 2023.
[6]
N. Asta et al., "The Use of Model Cellulose Materials for Studying Molecular Interactions at Cellulose Interfaces," ACS Macro Letters, vol. 12, no. 11, pp. 1530-1535, 2023.
[7]
L. Li et al., "Ultrastrong Ionotronic Films Showing Electrochemical Osmotic Actuation," Advanced Materials, vol. 35, no. 45, 2023.
[9]
M. Zhao et al., "Effect of saturation adsorption of paper strength additives on the performance of paper," Nordic Pulp & Paper Research Journal, vol. 37, no. 4, pp. 624-635, 2022.
[10]
K. Jiang et al., "Engineering Surfaces with Immune Modulating Properties of Mucin Hydrogels," ACS Applied Materials and Interfaces, vol. 14, no. 35, pp. 39727-39735, 2022.
[13]
W. Xu et al., "Solid-state polymer adsorption for surface modification : The role of molecular weight," Journal of Colloid and Interface Science, vol. 605, pp. 441-450, 2022.
[15]
M. Wallmeier et al., "Phenomenological analysis of constrained in-plane compression of paperboard using micro-computed tomography Imaging," Nordic Pulp & Paper Research Journal, vol. 36, no. 3, pp. 491-502, 2021.
[16]
M. Nordenström et al., "Redispersion Strategies for Dried Cellulose Nanofibrils," ACS Sustainable Chemistry and Engineering, vol. 9, no. 33, pp. 11003-11010, 2021.
[18]
C. Chen et al., "Bactericidal surfaces prepared by femtosecond laser patterning andlayer-by-layer polyelectrolyte coating," Journal of Colloid and Interface Science, vol. 575, pp. 286-297, 2020.
[19]
S. Duan et al., "Determination of transverse and shear moduli of single carbon fibres," Carbon, vol. 158, pp. 772-782, 2020.
[21]
H. Li et al., "Macro- and microstructural evolution during drying of regenerated cellulose beads," ACS Nano, vol. 14, no. 6, pp. 6774-6784, 2020.
[23]
P. R. Karlsson et al., "Swelling of Cellulose-Based Fibrillar and Polymeric Networks Driven by Ion-Induced Osmotic Pressure," Langmuir, vol. 36, no. 41, pp. 12261-12271, 2020.
[24]
K. Mystek et al., "Wet-expandable capsules made from partially modified cellulose," Green Chemistry, vol. 22, no. 14, pp. 4581-4592, 2020.
[27]
A. Träger et al., "Macroscopic cellulose probes for the measurement of polymer grafted surfaces," Cellulose, vol. 26, no. 3, pp. 1467-1477, 2019.
[30]
[31]
N. B. Erdal et al., "Green Strategy to Reduced Nanographene Oxide through Microwave Assisted Transformation of Cellulose," ACS Sustainable Chemistry and Engineering, vol. 6, no. 1, pp. 1245-1255, 2018.
[32]
J. Hellwig, V. López Durán and T. Pettersson, "Measuring elasticity of wet cellulose fibres with AFM using indentation and a linearized Hertz model," Analytical Methods, vol. 10, no. 31, 2018.
[33]
J. Erlandsson et al., "On the mechanism behind freezing-induced chemical crosslinking in ice-templated cellulose nanofibril aerogels," Journal of Materials Chemistry A, vol. 6, no. 40, pp. 19371-19380, 2018.
[34]
[35]
T. Pettersson et al., "Measurement of the flexibility of wet cellulose fibres using atomic force microscopy," Cellulose, vol. 24, no. 10, pp. 4139-4149, 2017.
[36]
J. Hellwig et al., "Measuring elasticity of wet cellulose beads with an AFM colloidal probe using a linearized DMT model," Analytical Methods, vol. 9, no. 27, pp. 4019-4022, 2017.
[37]
I. Banerjee et al., "Slipdisc : A versatile sample preparation platform for point of care diagnostics," RSC Advances, vol. 7, no. 56, pp. 35048-35054, 2017.
[38]
S. Torron et al., "Tailoring Soft Polymer Networks Based on Sugars and Fatty Acids toward Pressure Sensitive Adhesive Applications," ACS Sustainable Chemistry and Engineering, vol. 5, no. 3, pp. 2632-2638, 2017.
[39]
L. Ovaskainen et al., "The effect of different wear on superhydrophobic wax coatings," Nordic Pulp & Paper Research Journal, vol. 32, no. 2, pp. 195-203, 2017.
[40]
A. Hajian et al., "Understanding the Dispersive Action of Nanocellulose for Carbon Nanomaterials," Nano letters (Print), vol. 17, no. 3, pp. 1439-1447, 2017.
[41]
B. Fallqvist et al., "Experimental and computational assessment of F-actin influence in regulating cellular stiffness and relaxation behaviour of fibroblasts," Journal of The Mechanical Behavior of Biomedical Materials, vol. 59, pp. 168-184, 2016.
[43]
K. H. Adolfsson et al., "Zero-Dimensional and Highly Oxygenated Graphene Oxide for Multifunctional Poly(lactic acid) Bionanocomposites," ACS Sustainable Chemistry and Engineering, vol. 4, no. 10, pp. 5618-5631, 2016.
[46]
P. A. Larsson, T. Pettersson and L. Wågberg, "Improved barrier films of cross-linked cellulose nanofibrils: a microscopy study," Green materials, vol. 2, no. 4, pp. 163-168, 2014.
[47]
[48]
L. Z. Rathje et al., "Oncogenes induce a vimentin filament collapse mediated by HDAC6 that is linked to cell stiffness," Proceedings of the National Academy of Sciences of the United States of America, vol. 111, no. 4, pp. 1515-1520, 2014.
[49]
T. Pettersson et al., "Robust and Tailored Wet Adhesion in Biopolymer Thin Films," Biomacromolecules, vol. 15, no. 12, pp. 4420-4428, 2014.
[50]
[52]
C. Lidenmark et al., "The adhesive behavior of extracted latex polymers towards silicon oxide and cellulose," International Journal of Adhesion and Adhesives, vol. 44, pp. 250-258, 2013.
[53]
C. Ankerfors et al., "Use of polyelectrolyte complexes and multilayers from polymers and nanoparticles to create sacrificial bonds between surfaces," Journal of Colloid and Interface Science, vol. 391, pp. 28-35, 2013.
[54]
P. Olin et al., "Water Drop Friction on Superhydrophobic Surfaces," Langmuir, vol. 29, no. 29, pp. 9079-9089, 2013.
[55]
C. Ankerfors, T. Pettersson and L. Wågberg, "AFM adhesion imaging for the comparison of polyelectrolyte complexes and polyelectrolyte multilayers," Soft Matter, vol. 8, no. 32, pp. 8298-8301, 2012.
[57]
E. Gustafsson et al., "Direct Adhesive Measurements between Wood Biopolyrner Model Surfaces," Biomacromolecules, vol. 13, no. 10, pp. 3046-3053, 2012.
[58]
J. Sotres et al., "NanoWear of Salivary Films vs. Substratum Wettability," Journal of Dental Research, vol. 91, no. 10, pp. 973-978, 2012.
[59]
T. Pettersson, S. Utsel and L. Wågberg, "Particle adhesion and imaging of particle/surface breakage zone," Review of Scientific Instruments, no. 83, pp. 106107, 2012.
[60]
S. Utsel et al., "Physical tuning of cellulose-polymer interactions utilizing cationic block copolymers based on PCL and quaternized PDMAEMA," ACS Applied Materials and Interfaces, vol. 4, no. 12, pp. 6796-6807, 2012.
[62]
E. K. Gamstedt et al., "Characterization of interfacial stress transfer ability of particulate cellulose composite materials," Mechanics of materials, vol. 43, no. 11, pp. 693-704, 2011.
[63]
M. Holmboe, S. Wold and T. Petterson, "Effects of the injection grout Silica sol on Bentonite," Physics and Chemistry of the Earth, vol. 36, no. 17/18, pp. 1580-1589, 2011.
[64]
A. Dedinaite et al., "Lubrication by organized soft matter," SOFT MATTER, vol. 6, no. 7, pp. 1520-1526, 2010.
[66]
E. Thormann, T. Pettersson and P. M. Claesson, "How to measure forces with atomic force microscopy without significant influence from nonlinear optical lever sensitivity," Review of Scientific Instruments, vol. 80, no. 9, 2009.
[67]
A. Naderi et al., "Effect of Polymer Architecture on the Adsorption Properties of a Nonionic Polymer," Langmuir, vol. 24, no. 13, pp. 6676-6682, 2008.
[69]
Z. Feldötö, T. Pettersson and A. Dédinaité, "Mucin-electrolyte interactions at the solid-liquid interface probed by QCM-D," Langmuir, vol. 24, no. 7, pp. 3348-3357, 2008.
[70]
T. Pettersson and A. Dėdinaitė, "Normal and Friction Forces between Mucin and Mucin-Chitosan Layers in Absence and Presence of SDS," Journal of Colloid and Interface Science, vol. 324, no. 1-2, pp. 246-256, 2008.
[71]
T. Pettersson et al., "The Effect of Salt Concentration and Cation Valency on Interactions Between Mucin-Coated Hydrophobic Surfaces," Progress in Colloid and Polymer Science, vol. 134, pp. 1-10, 2008.
[74]
H. Mizuno et al., "Friction measurement between polyester fibres using the fibre probe SPM," Australian journal of chemistry (Print), vol. 59, no. 6, pp. 390-393, 2006.
[75]
T. Pettersson and A. Fogden, "Leveling during toner fusing : Effects on surface roughness and gloss of printed paper," Journal of Imaging Science and Technology, vol. 50, no. 2, pp. 202-215, 2006.
[76]
P. Attard, T. Pettersson and M. W. Rutland, "Thermal calibration of photodiode sensitivity for atomic force microscopy," Review of Scientific Instruments, vol. 77, no. 11, 2006.
[77]
T. Pettersson and A. Fogden, "Spreading of individual toner particles studied using in situ optical microscopy," Journal of Colloid and Interface Science, vol. 287, no. 1, pp. 249-260, 2005.

Conference papers

[78]
H. Ramachandraiah, T. Pettersson and A. Russom, "Layer-by-layer system based on cellulose nanofibrils for capture and release of cells in microfluidic device," in Proceedings 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2017, 2020, pp. 796-797.
[79]
S. Duan et al., "Transverse modulus measurement of carbon fibre by atomice force microscope and nanoindentation," in ICCM International Conferences on Composite Materials, 2019.

Non-peer reviewed

Articles

[80]
M.-P. Belioka, M. S. Reid and T. Pettersson, "Exploration of surface cleaning and surface interactions via atomic force microscopy," Abstracts of Papers of the American Chemical Society, vol. 257, 2019.

Theses

[81]
T. Pettersson, "Lubrication and Surface Properties of Adsorbed Layers of Polyelectrolytes and Proteins," Doctoral thesis Stockholm : KTH, Trita-CHE-Report, 2008:16, 2008.
[82]
T. Pettersson, "Wetting and levelling of toner during fusing of electrophotographic prints," Licentiate thesis Stockholm : Kemi, Trita-YTK, 0404, 2004.

Other

[91]
Latest sync with DiVA:
2024-07-07 02:11:14