Publikationer av Karin Odelius
Refereegranskade
Artiklar
[1]
K. I. Garfias González, M. Hakkarainen och K. Odelius, "Mechanical recycling of epoxy composites reinforced with short-cut aramid fibers: Surface functionalization – The missing piece of the puzzle," Polymer, vol. 295, 2024.
[2]
S. Honda, K. Odelius och H. Sardon, "Organomediated polymerization," Communications Chemistry, vol. 7, no. 1, 2024.
[3]
L. Cederholm et al., "Chemical recycling to monomer: thermodynamic and kinetic control of the ring-closing depolymerization of aliphatic polyesters and polycarbonates," Polymer Chemistry, vol. 14, no. 28, s. 3270-3276, 2023.
[4]
J. Huang et al., "Correlation between Polymerization Rate, Mechanism, and Conformer Thermodynamic Stability in Urea/Methoxide-Catalyzed Polymerization of Macrocyclic Carbonates," Macromolecules, vol. 56, no. 18, s. 7496-7504, 2023.
[5]
L. Cederholm et al., "Design for Recycling : Polyester- and Polycarbonate-Based A-B-A Block Copolymers and Their Recyclability Back to Monomers," Macromolecules, vol. 56, no. 10, s. 3641-3649, 2023.
[6]
V. Nieboer et al., "Lewis-pair derived activated lactone initiator (ALI) complex for rapid, controlled, bench stable and selective ring-opening polymerization of (macro)lactones," European Polymer Journal, vol. 201, 2023.
[7]
V. Nieboer et al., "Linear not cyclic : unravelling an anionic initiation pathway for Lewis pair polymerization of lactones," Polymer Chemistry, vol. 14, no. 20, s. 2485-2493, 2023.
[8]
J. Huang et al., "Simple Approach to Macrocyclic Carbonates with Fast Polymerization Rates and Their Polymer-to-Monomer Regeneration," Macromolecules, vol. 55, no. 2, s. 608-614, 2022.
[9]
C. Pronoitis, M. Hakkarainen och K. Odelius, "Structurally Diverse and Recyclable Isocyanate-Free Polyurethane Networks from CO2-Derived Cyclic Carbonates," ACS Sustainable Chemistry and Engineering, vol. 10, no. 7, s. 2522-2531, 2022.
[10]
W. Xuan, K. Odelius och M. Hakkarainen, "Tailoring Oligomeric Plasticizers for Polylactide through Structural Control," ACS Omega, vol. 7, no. 16, s. 14305-14316, 2022.
[11]
L. Cederholm et al., "“Like Recycles Like” : Selective Ring-Closing Depolymerization of Poly(L-Lactic Acid) to L-Lactide," Angewandte Chemie International Edition, vol. 61, no. 33, 2022.
[12]
C. Pronoitis, M. Hakkarainen och K. Odelius, "Long-chain polyamide covalent adaptable networks based on renewable ethylene brassylate and disulfide exchange," Polymer Chemistry, vol. 12, no. 39, s. 5668-5678, 2021.
[13]
E. Bäckström, K. Odelius och M. Hakkarainen, "Microwave Assisted Selective Hydrolysis of Polyamides from Multicomponent Carpet Waste," Global Challenges, 2021.
[14]
J. G. Yao, K. Odelius och M. Hakkarainen, "Microwave Hydrophobized Lignin with Antioxidant Activity for Fused Filament Fabrication," ACS APPLIED POLYMER MATERIALS, vol. 3, no. 7, s. 3538-3548, 2021.
[15]
H. Xu et al., "Nanostructured Phase Morphology of a Biobased Copolymer for Tough and UV-Resistant Polylactide," ACS Applied Polymer Materials, vol. 3, no. 4, s. 1973-1982, 2021.
[16]
C. Pronoitis, M. Hakkarainen och K. Odelius, "Solubility-governed architectural design of polyhydroxyurethane-graft-poly(epsilon-caprolactone) copolymers," Polymer Chemistry, vol. 12, no. 2, s. 196-208, 2021.
[17]
W. Xuan, K. Odelius och M. Hakkarainen, "Tunable polylactide plasticizer design: Rigid stereoisomers," European Polymer Journal, vol. 157, 2021.
[18]
E. Bäckström, K. Odelius och M. Hakkarainen, "Ultrafast microwave assisted recycling of PET to a family of functional precursors and materials," European Polymer Journal, vol. 151, no. 110441, 2021.
[19]
J. G. Yao, K. Odelius och M. Hakkarainen, "Carbonized lignosulfonate-based porous nanocomposites for adsorption of environmental contaminants," Functional Composite Materials, vol. 1, no. 1, 2020.
[20]
W. Xuan, K. Odelius och M. Hakkarainen, "Dual-Functioning Antibacterial Eugenol-Derived Plasticizers for Polylactide," Biomolecules, vol. 10, no. 7, 2020.
[21]
L. Cederholm et al., "Microwave processing of lignin in green solvents : A high-yield process to narrow-dispersity oligomers," Industrial crops and products (Print), vol. 145, 2020.
[22]
Y. Xu, K. Odelius och M. Hakkarainen, "Photocurable, Thermally Reprocessable, and Chemically Recyclable Vanillin-Based Imine Thermosets," ACS Sustainable Chemistry and Engineering, vol. 8, no. 46, s. 17272-17279, 2020.
[23]
Y. Xu, K. Odelius och M. Hakkarainen, "Recyclable and Flexible Polyester Thermosets Derived from Microwave-Processed Lignin," ACS Applied Polymer Materials, vol. 2, no. 5, s. 1917-1924, 2020.
[24]
L. Cederholm et al., "Turning natural delta-lactones to thermodynamically stable polymers with triggered recyclability," Polymer Chemistry, vol. 11, no. 30, s. 4883-4894, 2020.
[25]
C. Pronoitis et al., "Biobased Polyamide Thermosets : From a Facile One-Step Synthesis to Strong and Flexible Materials," Macromolecules, vol. 52, no. 16, s. 6181-6191, 2019.
[26]
E. Bäckström, K. Odelius och M. Hakkarainen, "Designed from Recycled : Turning Polyethylene Waste to Covalently Attached Polylactide Plasticizers," ACS Sustainable Chemistry and Engineering, vol. 7, no. 12, s. 11004-11013, 2019.
[27]
W. Xuan, M. Hakkarainen och K. Odelius, "Levulinic Acid as a Versatile Building Block for Plasticizer Design," ACS Sustainable Chemistry and Engineering, vol. 7, no. 14, s. 12552-12562, 2019.
[28]
Y. Xu, K. Odelius och M. Hakkarainen, "One-Pot Synthesis of Lignin Thermosets Exhibiting Widely Tunable Mechanical Properties and Shape Memory Behavior," ACS Sustainable Chemistry and Engineering, vol. 7, no. 15, s. 13456-13463, 2019.
[29]
G. Hua, J. Franzén och K. Odelius, "Phosphazene-Catalyzed Regioselective Ring-Opening Polymerization of rac-1-Methyl Trimethylene Carbonate : Colder and Less is Better," Macromolecules, vol. 52, no. 7, s. 2681-2690, 2019.
[30]
Z. Feng et al., "Recyclable fully biobased chitosan adsorbents spray-dried in one-pot to microscopic size and enhanced adsorption capacity," Biomacromolecules, vol. 20, no. 5, s. 1956-1964, 2019.
[31]
G. Hua et al., "Anionic polycondensation and equilibrium driven monomer formation of cyclic aliphatic carbonates," RSC Advances, vol. 8, no. 68, s. 39022-39028, 2018.
[32]
G. Hua och K. Odelius, "Exploiting Ring-Opening Aminolysis–Condensation as a Polymerization Pathway to Structurally Diverse Biobased Polyamides," Biomacromolecules, 2018.
[33]
Y. Xu et al., "Isosorbide as Core Component for Tailoring Biobased Unsaturated Polyester Thermosets for a Wide Structure- Property Window," Biomacromolecules, vol. 19, no. 7, s. 3077-3085, 2018.
[34]
Z. Feng et al., "Microwave carbonized cellulose for trace pharmaceutical adsorption," Chemical Engineering Journal, vol. 346, s. 557-566, 2018.
[35]
Z. Feng, K. Odelius och M. Hakkarainen, "Tunable chitosan hydrogels for adsorption : Property control by biobased modifiers," Carbohydrate Polymers, vol. 196, s. 135-145, 2018.
[36]
Z. Feng et al., "Biobased Nanographene Oxide Creates Stronger Chitosan Hydrogels with Improved Adsorption Capacity for Trace Pharmaceuticals," ACS Sustainable Chemistry and Engineering, vol. 5, no. 12, s. 11525-11535, 2017.
[37]
M. Michalak et al., "Diversifying Polyhydroxyalkanoates - End-Group and Side-Chain Functionality," Current Organic Synthesis, vol. 14, no. 6, s. 757-767, 2017.
[38]
G. Hua och K. Odelius, "Isocyanate-Free, UV-Crosslinked Poly(Hydroxyurethane) Networks: A Sustainable Approach toward Highly Functional Antibacterial Gels," Macromolecular Bioscience, 2017.
[39]
A. S. Avalos, M. Hakkarainen och K. Odelius, "Superiorly Plasticized PVC/PBSA Blends through Crotonic and Acrylic Acid Functionalization of PVC," Polymers, vol. 9, no. 3, 2017.
[40]
E. Backström, K. Odelius och M. Hakkarainen, "Trash to Treasure : Microwave-Assisted Conversion of Polyethylene to Functional Chemicals," Industrial & Engineering Chemistry Research, vol. 56, no. 50, s. 14814-14821, 2017.
[41]
J. Undin et al., "Controlled copolymerization of the functional 5-membered lactone monomer, alpha-bromo-gamma-butyrolactone, via selective organocatalysis," Polymer, vol. 87, s. 17-25, 2016.
[42]
V. Arias et al., "Forecasting linear aliphatic copolyester degradation through modular block design," Polymer degradation and stability, vol. 130, s. 58-67, 2016.
[43]
G. Hua och K. Odelius, "From Food Additive to High-Performance Heavy Metal Adsorbent : A Versatile and Well-Tuned Design," ACS Sustainable Chemistry and Engineering, 2016.
[44]
G. Hua, F. Johan och K. Odelius, "One-pot inimer promoted ROCP synthesis of branched copolyesters using α-hydroxy-γ-butyrolactone as the branching reagent," Journal of Polymer Science Part A : Polymer Chemistry, vol. 54, no. 13, s. 1908-1918, 2016.
[45]
X. Yang et al., "Poly(lactide)-g-poly(butylene succinate-co-adipate) with High Crystallization Capacity and Migration Resistance," Materials, vol. 9, no. 5, 2016.
[46]
L. Glavas, K. Odelius och A.-C. Albertsson, "Simultaneous Polymerization and Polypeptide Particle Production via Reactive Spray-Drying," Biomacromolecules, vol. 17, no. 9, s. 2930-2936, 2016.
[47]
H. Xu et al., "Stereocontrolled Entanglement-Directed Self-Alignment of Poly(lactic acid) Cylindrites," Macromolecular Chemistry and Physics, vol. 217, no. 23, s. 2567-2575, 2016.
[48]
P. Olsen et al., "Switching from Controlled Ring-Opening Polymerization (cROP) to Controlled Ring-Closing Depolymerization (cRCDP) by Adjusting the Reaction Parameters That Determine the Ceiling Temperature," Biomacromolecules, vol. 17, no. 12, s. 3995-4002, 2016.
[49]
P. Olsén, K. Odelius och A.-C. Albertsson, "Thermodynamic Presynthetic Considerations for Ring-Opening Polymerization," Biomacromolecules, vol. 17, no. 3, s. 699-709, 2016.
[50]
V. Arias et al., "Toward "Green" Hybrid Materials : Core-Shell Particles with Enhanced Impact Energy Absorbing Ability," ACS Sustainable Chemistry and Engineering, vol. 4, no. 7, s. 3757-3765, 2016.
[51]
A. Meszynska et al., "Effect of Oligo-Hydroxyalkanoates on Poly(3-Hydroxybutyrate-co-4-Hydroxybutyrate)-Based Systems," Macromolecular materials and engineering, vol. 300, no. 6, s. 661-666, 2015.
[52]
V. Arias et al., "Homocomposites of Polylactide (PLA) with Induced Interfacial Stereocomplex Crystallites," ACS Sustainable Chemistry and Engineering, vol. 3, no. 9, s. 2220-2231, 2015.
[53]
W. Zhao et al., "In Situ Cross-Linking of Stimuli-Responsive Hemicellulose Microgels during Spray Drying," ACS Applied Materials and Interfaces, vol. 7, no. 7, s. 4202-4215, 2015.
[54]
W. Zhao et al., "In Situ Synthesis of Magnetic Field-Responsive Hemicellulose Hydrogels for Drug Delivery," Biomacromolecules, vol. 16, no. 8, s. 2522-2528, 2015.
[55]
P. Olsén et al., "Macromolecular Design via an Organocatalytic, Monomer-Specific and Temperature-Dependent "On/Off Switch" : High Precision Synthesis of Polyester/Polycarbonate Multiblock Copolymers," Macromolecules, vol. 48, no. 6, s. 1703-1710, 2015.
[56]
V. Arias et al., "Selective degradation in aliphatic block copolyesters by controlling the heterogeneity of the amorphous phase," Polymer Chemistry, vol. 6, no. 17, s. 3271-3282, 2015.
[57]
R. W. N. Nugroho et al., "The nature of polymer grafts and substrate shape on the surface degradation of poly(l-lactide)," Journal of Applied Polymer Science, vol. 132, no. 47, 2015.
[58]
L. Glavas, K. Odelius och A.-C. Albertsson, "Tuning loading and release by modification of micelle core crystallinity and preparation," Polymers for Advanced Technologies, vol. 26, no. 7, s. 880-888, 2015.
[59]
X. Yang et al., "Two step extrusion process : From thermal recycling of PHB to plasticized PLA by reactive extrusion grafting of PHB degradation products onto PLA chains," Macromolecules, vol. 48, no. 8, s. 2509-2518, 2015.
[60]
W. Zhao et al., "A robust pathway to electrically conductive hemicellulose hydrogels with high and controllable swelling behavior," Polymer, vol. 55, no. 13, s. 2967-2976, 2014.
[61]
P. Olsén et al., "Establishing α-bromo-γ-butyrolactone as a platform for synthesis of functional aliphatic polyesters-bridging the gap between ROP and SET-LRP," Polymer Chemistry, vol. 5, no. 12, s. 3847-3854, 2014.
[62]
W. Zhao et al., "Facile and Green Approach towards Electrically Conductive Hemicellulose Hydrogels with Tunable Conductivity and Swelling Behavior," Chemistry of Materials, vol. 26, no. 14, s. 4265-4273, 2014.
[63]
L. Glavas, K. Odelius och A.-C. Albertsson, "Induced redox responsiveness and electroactivity for altering the properties of micelles without external stimuli," Soft Matter, vol. 10, no. 22, s. 4028-4036, 2014.
[64]
X. Yang, K. Odelius och M. Hakkarainen, "Microwave-Assisted Reaction in Green Solvents Recycles PHB to Functional Chemicals," ACS Sustainable Chemistry and Engineering, vol. 2, no. 9, s. 2198-2203, 2014.
[65]
V. Arias, K. Odelius och A.-C. Albertsson, "Nano-Stereocomplexation of Polylactide (PLA) Spheres by Spray Droplet Atomization," Macromolecular rapid communications, vol. 35, no. 22, s. 1949-1953, 2014.
[66]
P. Olsén, K. Odelius och A.-C. Albertsson, "Ring-Closing Depolymerization : A Powerful Tool for Synthesizing the Allyloxy-Functionalized Six-Membered Aliphatic Carbonate Monomer 2-Allyloxymethyl-2-ethyltrimethylene Carbonate," Macromolecules, vol. 47, no. 18, s. 6189-6195, 2014.
[67]
V. Arias et al., "Tuning the Degradation Profiles of Poly(L-lactide)-Based Materials through Miscibility," Biomacromolecules, vol. 15, no. 1, s. 391-402, 2014.
[68]
L. Glavas et al., "Achieving Micelle Control through Core Crystallinity," Biomacromolecules, vol. 14, no. 11, s. 4150-4156, 2013.
[69]
R. W. N. Nugroho et al., "Crosslinked PVAL nanofibers with enhanced long-term stability prepared by single-step electrospinning," Polymers for Advanced Technologies, vol. 24, no. 4, s. 421-429, 2013.
[70]
R. W. N. Nugroho et al., "Force Interactions of Nonagglomerating Polylactide Particles Obtained through Covalent Surface Grafting with Hydrophilic Polymers," Langmuir, vol. 29, no. 26, s. 8873-8881, 2013.
[71]
K. Odelius et al., "Polyesters with small structural variations improve the mechanical properties of polylactide," Journal of Applied Polymer Science, vol. 127, no. 1, s. 27-33, 2013.
[72]
V. Arias et al., "Polylactides with "green" plasticizers : Influence of isomer composition," Journal of Applied Polymer Science, vol. 130, no. 4, s. 2962-2970, 2013.
[73]
P. Olsén et al., "epsilon-Decalactone : A Thermoresilient and Toughening Comonomer to Poly(L-lactide)," Biomacromolecules, vol. 14, no. 8, s. 2883-2890, 2013.
[74]
A. Höglund, K. Odelius och A.-C. Albertsson, "Crucial Differences in the Hydrolytic Degradation between Industrial Polylactide and Laboratory-Scale Poly(L-lactide)," ACS Applied Materials and Interfaces, vol. 4, no. 5, s. 2788-2793, 2012.
[75]
P. Olsén, K. Odelius och A.-C. Albertsson, "Main-chain functionalization of poly(l-lactide) with pendant unsaturations," Journal of Polymer Science Part A : Polymer Chemistry, vol. 50, no. 15, s. 3039-3045, 2012.
[76]
R. W. N. Nugroho et al., "Nondestructive Covalent "Grafting-from" of Poly(lactide) Particles of Different Geometries," ACS Applied Materials and Interfaces, vol. 4, no. 6, s. 2978-2984, 2012.
[77]
K. Odelius et al., "Porosity and Pore Size Regulate the Degradation Product Profile of Polylactide," Biomacromolecules, vol. 12, no. 4, s. 1250-1258, 2011.
[78]
K. Odelius och A.-C. Albertsson, "Precision synthesis of microstructures in star-shaped copolymers of epsilon-caprolactone, L-lactide, and 1,5-dioxepan-2-one," Journal of Polymer Science Part A : Polymer Chemistry, vol. 46, no. 4, s. 1249-1264, 2008.
[79]
K. Odelius, P. Plikk och A.-C. Albertsson, "The influence of composition of porous copolyester scaffolds on reactions induced by irradiation sterilization," Biomaterials, vol. 29, no. 2, s. 129-140, 2008.
[80]
A. Höglund et al., "Controllable Degradation Product Migration from Cross-Linked Biomedical Polyester-Ethers through Predetermined Alterations in Copolymer Composition," Biomacromolecules, vol. 8, no. 6, s. 2025-2032, 2007.
[81]
M. Hakkarainen et al., "Tuning the release rate of acidic degradation products through macromolecular design of caprolactone-based copolymers," Journal of the American Chemical Society, vol. 129, no. 19, s. 6308-6312, 2007.
[82]
P. Plikk et al., "Finalizing the properties of porous scaffolds of aliphatic polyesters through radiation sterilization," Biomaterials, vol. 27, no. 31, s. 5335-5347, 2006.
[83]
K. Odelius, A. Finne och A.-C. Albertsson, "Versatile and controlled synthesis of resorbable star-shaped polymers using a spirocyclic tin initiator : Reaction optimization and kinetics," Journal of Polymer Science Part A : Polymer Chemistry, vol. 44, no. 1, s. 596-605, 2006.
[84]
M. S. Hedenqvist et al., "Adhesion of microwave-plasma-treated fluoropolymers to thermoset vinylester," Journal of Applied Polymer Science, vol. 98, no. 2, s. 838-842, 2005.
[85]
K. Odelius, P. Plikk och A.-C. Albertsson, "Elastomeric hydrolyzable porous scaffolds : Copolymers of aliphatic polyesters and a polyether-ester," Biomacromolecules, vol. 6, no. 5, s. 2718-2725, 2005.
Konferensbidrag
[86]
A.-C. Albertsson, K. Odelius och A. Finne-Wistrand, "Controlled synthesis of star-shaped homo- and co-polymers of aliphatic polyesters," i 7th International Biorelated Polymers Symposium, 2006, s. 37-38.
Icke refereegranskade
Artiklar
[87]
K. Odelius, "Ring-opening reactions to functional polyamides and polyurethanes," Abstracts of Papers of the American Chemical Society, vol. 257, 2019.
[88]
K. Odelius, "Design of renewable polymeric materials through ring-opening reactions," Abstracts of Papers of the American Chemical Society, vol. 256, 2018.
[89]
Y. Xu, K. Odelius och M. Hakkarainen, "Synthesis of bio-based and recyclable thermosets," Abstracts of Papers of the American Chemical Society, vol. 256, 2018.
[90]
R. W. N. Nugroho et al., "Highlighting the Importance of Surface Grafting in Combination with a Layer-by-Layer Approach for Fabricating Advanced 3D Poly(L-lactide) Microsphere Scaffolds," CHEMISTRY OF MATERIALS, vol. 28, no. 10, s. 3298-3307, 2016.
[91]
T. Pettersson et al., "Designing nonagglomerating polylactide particles with various interaction forces by covalent photografting," Abstracts of Papers of the American Chemical Society, vol. 247, s. 768-COLL, 2014.
[92]
R. W. N. Nugroho et al., "Force interactions of grafted polylactide particles," Abstracts of Papers of the American Chemical Society, vol. 248, 2014.
[93]
P. Olsen et al., "Functional degradable polymers - simplified," Abstracts of Papers of the American Chemical Society, vol. 248, 2014.
[94]
L. Glavas, K. Odelius och A.-C. Albertsson, "Redox responsiveness and electroactivity for preparation of smart micelles," Abstracts of Papers of the American Chemical Society, vol. 248, 2014.
[95]
V. Arias et al., "Tailoring the hydrolytic endurance of Poly(L-lactide)-based products," Abstracts of Papers of the American Chemical Society, vol. 248, 2014.
[96]
K. Odelius, P. G. Olsén och A.-C. Albertsson, "Improving PLA-based material properties," Abstracts of Papers of the American Chemical Society, vol. 244, 2012.
[97]
L. Glavas et al., "Tuned electrical conductivity by macromolecular architecture : Electroactive and degradable block copolymers based on polyesters and aniline oligomers," Abstracts of Papers of the American Chemical Society, vol. 244, 2012.
[98]
A.-C. Albertsson, K. Odelius och A. Finne Wistrand, "POLY 554-Controlled synthesis of star-shaped homo- and co-polymers of aliphatic polyesters," Abstracts of Papers of the American Chemical Society, vol. 232, 2006.
Avhandlingar
[99]
K. Odelius, "Macromolecular design and architecture of aliphatic polyesters," Doktorsavhandling Stockholm : KTH, Trita-CHE-Report, 2008:11, 2008.
[100]
K. Odelius, "Design of polyester and porous scaffolds," Licentiatavhandling Stockholm : KTH, Trita-FPT-Report, 2005:36, 2005.
Övriga
[101]
[102]
[103]
L. Cederholm et al., "Design for recycling: polyester and polycarbonate based A-B-A block copolymers and their recyclability back to monomer," (Manuskript).
[104]
C. Pronoitis, M. Hakkarainen och K. Odelius, "From chemical valorization of CO2 for cyclic carbonates to structurally diverse and recyclable isocyanate-free polyurethane networks," (Manuskript).
[105]
K. Odelius och M. Hakkarainen, "Microwave assisted selective hydrolysis of polyamides from multicomponent carpet waste," (Manuskript).
[106]
W. Xuan, K. Odelius och M. Hakkarainen, "Tailoring Miscibility of Polylactide Plasticizers through Oligolactide Segments," (Manuskript).
[107]
E. Bäckström, K. Odelius och M. Hakkarainen, "Ultrafast microwave assisted recycling of PET to library of functional materials," (Manuskript).
Senaste synkning med DiVA:
2024-04-19 00:03:12