Skip to main content

Publications by Jakob Kuttenkeuler



C. Deutsch et al., "Evaluation of energy management strategies for fuel cell/battery-powered underwater vehicles against field trial data," Energy Conversion and Management: X, vol. 14, pp. 100193-100193, 2022.
N. Kirchner et al., "A first continuous three-year temperature record from the dimictic arctic-alpine Lake Tarfala, northern Sweden," Arctic, Antarctic and Alpine research, vol. 53, no. 1, pp. 69-79, 2021.
C. Deutsch, J. Kuttenkeuler and T. Melin, "Glider performance analysis and intermediate-fidelity modelling of underwater vehicles," Ocean Engineering, vol. 210, 2020.
R. Ringbäck et al., "Multi-Agent Formation Tracking for Autonomous Surface Vehicles," IEEE Transactions on Control Systems Technology, 2020.
M. Kjelldorff et al., "Water current measurements using oceanographic bottom lander LoTUS," Applied Ocean Research, vol. 94, 2020.
N. Kirchner et al., "High-resolution bathymetric mapping reveals subaqueous glacial landforms in the Arctic alpine lake Tarfala, Sweden," Journal of Quaternary Science, vol. 34, no. 6, pp. 452-462, 2019.
M. Burman et al., "Comparative Life Cycle Assessment of the hull of a high-speed craft," Journal of Engineering for the Maritime Environment (Part M), vol. 230, no. 2, pp. 378-387, 2016.
I. Stenius, L. Fagerberg and J. Kuttenkeuler, "Experimental eigenfrequency study of dry and fully wetted rectangular composite and metallic plates by forced vibrations," Ocean Engineering, vol. 111, pp. 95-103, 2016.
L. Skoglund et al., "A comparative study of deterministic and ensemble weather forecasts for weather routing," Journal of Marine Science and Technology, vol. 20, no. 3, pp. 429-441, 2015.
K. Garme et al., "Rough water performance of lightweight high-speed craft," Journal of Engineering for the Maritime Environment (Part M), vol. 228, no. 3, pp. 293-301, 2014.
M. Razola, J. Kuttenkeuler and A. Rosén, "Adressing localized assault loads in composite craft design," Transactions of the Royal Institution of Naval Architects Part B: International Journal of Small Craft Technology, vol. 154, no. Part B2, pp. B87-B93, 2013.
C.-J. Söder et al., "Parametric roll mitigation using rudder control," Journal of Marine Science and Technology, vol. 18, no. 3, pp. 395-403, 2013.
I. Stenius, A. Rosén and J. Kuttenkeuler, "Hydroelastic interaction in panel-water impacts of high-speed craft," Ocean Engineering, vol. 38, no. 2-3, pp. 371-381, 2011.
K. Garme, L. Burström and J. Kuttenkeuler, "Measures of vibration exposure for a high-speed craft crew," Journal of Engineering for the Maritime Environment (Part M), vol. 225, no. M4, pp. 338-349, 2011.
I. Stenius, A. Rosén and J. Kuttenkeuler, "On Structural Design of Energy Efficient Small High-Speed Craft," Marine Structures, vol. 24, no. 1, pp. 43-59, 2011.
I. Stenius, A. Rosén and J. Kuttenkeuler, "Explicit FE-modelling of hydroelasticity in panel-water impacts," International Shipbuilding Progress, vol. 54, no. 2-3, pp. 111-127, 2007.
I. Stenius, A. Rosén and J. Kuttenkeuler, "Explicit FE-modelling of fluid-structure interaction in hull-water impacts," International Shipbuilding Progress, vol. 53, no. 2, pp. 103-121, 2006.
M. Carlsson and J. Kuttenkeuler, "Design and testing of a blended wing body aeroelastic wind-tunnel model," Journal of Aircraft, vol. 40, no. 1, pp. 211-213, 2003.
D. Borglund and J. Kuttenkeuler, "Active wing flutter suppression using a trailing edge flap," Journal of Fluids and Structures, vol. 16, no. 3, pp. 271-294, 2002.
J. Kuttenkeuler, "Optical measurements of flutter mode shapes," Journal of Aircraft, vol. 37, no. 5, pp. 846-849, 2000.
J. Kuttenkeuler and U. Ringertz, "Aeroelastic design optimization with experimental verification," Journal of Aircraft, vol. 35, no. 3, pp. 505-507, 1998.
J. Kuttenkeuler and U. Ringertz, "Aeroelastic tailoring considering uncertainties in material properties," Structural optimization (Print), vol. 15, no. 3-4, pp. 157-162, 1998.
J. L. Grenestedt, S. Hallström and J. Kuttenkeuler, "On cracks emanating from wedges in expanded PVC foam," Engineering Fracture Mechanics, vol. 54, no. 4, pp. 445-456, 1996.


C. Deutsch et al., "Fuel Cells in Practice : Challenges and Benefits for AUVs," in Oceans Conference Record (IEEE), 2022.
E. S. Erstorp, P. Sigray and J. Kuttenkeuler, "An Adaptive Transmission Power Controller for Flooding-based Underwater Network Protocols," in 2021 5th Underwater Communications and Networking Conference, UComms 2021, 2021.
S. Werner et al., "Performance predictions of long-distance sailing vessels," in 7th High Performance Yacht Design Conference, HPYD 2021, 2021.
C. Deutsch et al., "Energy Management Strategies for Fuel Cell-Battery Hybrid AUVs," in 2020 IEEE/OES Autonomous Underwater Vehicles Symposium, AUV 2020, 2020.
M. Waller et al., "Force Balances for Monitoring Autonomous Rigid-Wing Sailboats," in Advances in Intelligent Systems and Computing, 2020, pp. 283-294.
U. Dhomé, N. Rolleberg and J. Kuttenkeuler, "Energy Efficient Self-Steering Mechanism for an Autonomous Sailing Vessel," in OCEANS 2019 - Marseille, OCEANS Marseille 2019, 2019.
V. Lidstrom et al., "Non-Coherent Acoustic Modulation for Energy Constrained Underwater Platforms," in OCEANS 2019 - Marseille, OCEANS Marseille 2019, 2019.
C. Deutsch et al., "Design of an AUV Research Platform for Demonstration of Novel Technologies," in AUV 2018 - 2018 IEEE/OES Autonomous Underwater Vehicle Workshop, Proceedings, 2018.
U. Dhomé et al., "Development and initial results of an autonomous sailing drone for oceanic research," in Marine Design XIII, 2018, pp. 633-644.
R. P. Jain et al., "Localization of an Acoustic Fish-Tag using the Time-of-Arrival Measurements : Preliminary results using eXogenous Kalman Filter," in 2018 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS), 2018, pp. 1695-1702.
A. Zolich et al., "A Formation of Unmanned Vehicles for Tracking of an Acoustic Fish-Tag," in OCEANS 2017 - ANCHORAGE, 2017.
C.-J. Söder et al., "Assessment of Ship Roll Damping through Full-Scale and Model-Scale Experiments and Semi-Empirical Methods," in 11th International Conference on the Stability of Ships and Ocean Vehicles, 2012.
A. Rosén et al., "3+2≠5 eller Programmål för ingenjörsutbildningar i ljuset av Bolognareformen," in 3:e Utvecklingskonferensen för Sveriges ingenjörsutbildningar, 2011, pp. 47-52.
K. Edström, S. Hallström and J. Kuttenkeuler, "Mini Workshop - Designing Project-Based Courses for Learning and Cost-Effective Teaching," in 2011 Frontiers In Education Conference (FIE), 2011.
A. Rosén, K. Garme and J. Kuttenkeuler, "Full-Scale Design Evaluation of the Visby Class Corvette," in 9th International Conference on Fast Sea Transportation, FAST'07, 2007, pp. 593-598.
P. Y. Young et al., "Design and development of CDIO student workspaces - Lessons learned," in 2005 ASEE Annual Conference and Exposition : The Changing Landscape of Engineering and Technology Education in a Global World, 2005, pp. 2867-2880.
J. Malmqvist et al., "Lessons learned from design-build-test-based project courses," in Design 2004 : Proceedings of the 8th International Design Conference, Vols 1-3, 2004, pp. 665-672.

Kapitel i böcker

C.-J. Söder et al., "Assessment of ship roll damping through full scale and model scale experiments and semi-empirical methods," in Contemporary Ideas on Ship Stability, Belenky V. L. Ed., : Springer, 2019, pp. 177-190.

Icke refereegranskade


L. Skoglund, J. Kuttenkeuler and A. Rosén, "Evaluating Weather Routing Decisions Using Ensemble Weather Forecasts," in International Conference on Design & Operation of Container Ships, 2014, pp. 61-66.
M. Burman and J. Kuttenkeuler, "Comparative Life Cycle Assessment (LCA) of the Hull of a High Speed Craft," in 16th International Conference on Composite Structures, 2011.
K. Garme, A. Rosén and J. Kuttenkeuler, "In Detail Investigation of Planing Pressure," in Proceedings of the HYDRALAB III Joint User Meeting, 2010.
S. Hallström, J. Kuttenkeuler and K. Edström, "The Route Towards a Sustainable Design-Implement Course," in 3rd CDIO Conference, 2007.
K. Edström et al., "Integrated assessment of diciplinary and interpersonal skills - student perceptions of a novel learning experience," in 13th International Symposium at the Oxford Centre for Staff and Learning Development - Improved Student Learning Through Assessment, 2005.
K. Garme and J. Kuttenkeuler, "Simulations and Full-Scale Trials for a HSC Linked by Wave-Height Measurements," in 8th International Conference on Fast Sea Transportation, 2005.
J. Kuttenkeuler and J. Grenestedt, "Influence of process parameters on mechanical behavior of RTM moldings," in Tenth International Conference on Composite Materials : III. Processing and Manufacturing; Whistler, British Columbia; Canada; 14-18 Aug. 1995., 1995, pp. 261-268.


J. Kuttenkeuler, "Aircraft composites and aeroelastic tailoring," Doctoral thesis Stockholm : KTH, Report. Department of Aeronautics, 98:13, 1998.


K. Garme et al., "In Detail Investigation of Planing Pressure," , NTNU/Marintek Ocean Basin, NTNU_Marintek_530512, EC contract no. 022441, Report NyIII-NTNU-11, 2011.
I. Stenius et al., "Kompositfartyg - en kort introduktion," , Trita-AVE, 2011:21, 2011.
A. Rosén et al., "Programmål inom den nya utbildningsstrukturen på KTH," Stockholm : KTH Royal Institute of Technology, 2010.
A. Rosén et al., "Sample Calculations on the Level 2 Vulnerability Criteria for Parametric Roll," , Report to the Swedish Transport Agency and the International Maritime Organization, IMO SLF 53/INF.8, 2010.
Senaste synkning med DiVA:
2023-06-04 04:19:30