Publications by Jens Fridh
Refereegranskade
Artiklar
[1]
S. Thantla et al., "Performance Analysis of a Dual-loop Organic Rankine Cycle System for Waste Heat Recovery from Engine Coolant and Exhaust of a Heavy-Duty Truck," Applied Thermal Engineering, vol. 219, no. part A, 2022.
[2]
J. Rijpkema et al., "Experimental investigation and modeling of a reciprocating piston expander for waste heat recovery from a truck engine," Applied Thermal Engineering, vol. 186, 2021.
[3]
A. S. Roy et al., "Flow instability effects related to purge through a gas turbine chute seal," Journal of the Global Power and Propulsion Society, vol. 5, pp. 111-125, 2021.
[4]
Y. Gao et al., "Numerical Investigation of the Performance Impact of Stator Tilting Endwall Designs on a Mixed Flow Turbine," INTERNATIONAL JOURNAL OF TURBOMACHINERY PROPULSION AND POWER, vol. 6, no. 2, pp. 14, 2021.
[5]
J. C. Heldens, J. Fridh and J. Ostlund, "On the characterization of methane in rocket nozzle cooling channels," Acta Astronautica, vol. 186, pp. 337-346, 2021.
[6]
J. T. M. Horwood et al., "Flow Instabilities in Gas Turbine Chute Seals," Journal of engineering for gas turbines and power, vol. 142, no. 2, 2020.
[7]
J. Dahlqvist and J. Fridh, "Experimental Investigation of Turbine Stage Flow Field and Performance at Varying Cavity Purge Rates and Operating Speeds," Journal of turbomachinery, vol. 140, no. 3, 2018.
[8]
B. Mamaev, R. Saha and J. Fridh, "Aerodynamic investigation of turbine cooled vane block," Thermal Engineering, vol. 62, no. 2, pp. 97-102, 2015.
[9]
L. El-Gabry et al., "Measurements of Hub Flow Interaction on Film Cooled Nozzle Guide Vane in Transonic Annular Cascade," Journal of turbomachinery, vol. 137, no. 8, 2015.
[10]
R. Saha et al., "Influence of Prehistory and Leading Edge Contouring on Aero Performance of a Three-Dimensional Nozzle Guide Vane," Journal of turbomachinery, vol. 136, no. 7, pp. 071014-1-071014-10, 2014.
[11]
R. Saha et al., "Shower Head and Trailing Edge Cooling Influence on Transonic Vane Aero Performance," Journal of turbomachinery, vol. 136, no. 11, pp. 111001, 2014.
[12]
J. Fridh, B. Laumert and T. Fransson, "Forced Response in Axial Turbines Under the Influence of Partial Admission," Journal of turbomachinery, vol. 135, no. 4, pp. 041014, 2013.
[13]
B. Mamaev, R. Saha and J. Fridh, "The influence of a special fillet between the endwall and airfoil at the leading edge on the performance of the turbine nozzle diaphragm," Thermal Engineering, vol. 60, no. 3, pp. 217-222, 2013.
[14]
N. Baagherzadeh Hushmandi, J. Fridh and T. Fransson, "Unsteady Forces of Rotor Blades in Full and Partial Admission Turbines," Journal of turbomachinery, vol. 133, no. 4, pp. 041017-1-041017-12, 2011.
[15]
M. Salomon Popa et al., "Gas Turbine Simulations in the Computerized Educational Program CompEduHPT : Three Case Studies," Journal of engineering for gas turbines and power, 2005.
Konferensbidrag
[16]
J. Thiyagarajan et al., "Study of the Variation in Component Level Characteristics of a Centrifugal Compressor Across the Compressor Map Using CFD and Experiments with Detailed Instrumentation on a Gas Stand," in Proceedings of ASME Turbo Expo 2023 : Turbomachinery Technical Conference and Exposition, GT 2023, 2023.
[17]
S. Hammer, J. Fridh and M. Billson, "IDENTIFICATION OF CRITICAL ACOUSTIC MODES FOR AN OPEN BOX CAVITY WITH ADJUSTABLE DEPTH," in 33rd Congress of the International Council of the Aeronautical Sciences, ICAS 2022, 2022, pp. 2910-2922.
[18]
S. Hammer, J. Fridh and M. Billson, "Experimental Investigation of Rossiter Modes for an Open Box Cavity With Adjustable Depth," in Proceedings of the ASME Turbo Expo, 2021.
[19]
J. C. Heldens, J. Fridh and J. Östlund, "On the characterization of methane in rocket nozzle cooling channels," in Proceedings of the International Astronautical Congress, IAC, 2020.
[20]
J. T. M. Horwood et al., "FLOW INSTABILITIES IN GAS TURBINE CHUTE SEALS," in PROCEEDINGS OF THE ASME TURBO EXPO : TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2019, VOL 5B, 2019.
[21]
S. Thantla et al., "Performance Analysis of Volumetric Expanders in Heavy-Duty Truck Waste Heat Recovery," in 2019 JSAE/SAE Powertrains, Fuels and Lubricants, 26 August 2019 through 29 August 2019, 2019.
[22]
S. Norton et al., "Modelling of turbine blade vibrations via computational intelligence methods," in 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017, 2017.
[23]
S. Chandramouli et al., "Numerical characterization of entropy noise with a density based solver," in 12th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2017, 2017.
[24]
J. Dahlqvist and J. Fridh, "SEEDGAS INVESTIGATION OF TURBINE STAGE AND SEAL PERFORMANCE AT VARYING CAVITY PURGE RATES AND OPERATING SPEEDS," in PROCEEDINGS OF THE ASME TURBO EXPO : TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2017, VOL 2A, 2017.
[25]
J. Thiyagarajan, E. Halldorf and J. Fridh, "Transient thrust forces on a twin scroll turbocharger," in Microturbines, Turbochargers and Small Turbomachines; Steam Turbines, 2017.
[26]
J. Dahlqvist and J. Fridh, "EXPERIMENTAL INVESTIGATION OF TURBINE STAGE FLOW FIELD AND PERFORMANCE AT VARYING CAVITY PURGE RATES AND OPERATING SPEEDS," in PROCEEDINGS OF THE ASME TURBO EXPO : TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 2B, 2016.
[27]
R. Saha, J. Fridh and M. Annerfeldt, "Aerodynamic implications of reduced vane count," in Proceedings of the ASME Turbo Expo, 2015.
[28]
J. Dahlqvist and J. Fridh, "Experimental flow and performance investigations of cavity purge flows in a high pressure turbine stage," in 11th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2015, 2015.
[29]
A. Alameldin et al., "CFD analysis of suction and pressure side film cooling influence on vane aero performance in a transonic annular cascade," in Proceedings of the ASME Turbo Expo, 2014.
[30]
R. Saha et al., "Shower Head and Trailing Edge Cooling Influence on Transonic Vane Aero Performance," in ASME Turbo Expo 2014 : Turbine Technical Conference and Exposition, 2014.
[31]
R. Saha et al., "Aerodynamic Implication of Endwall and Profile Film Cooling in a Transonic Annular Cascade," in 21st ISABE Conference, 2013.
[32]
R. Saha et al., "Influence of pre-history and leading edge contouring on aero-performance of a 3D nozzle guide vane," in Proceedings of the ASME Gas Turbine India Conference -2013- ; presented at ASME 2013 Gas Turbine India Conference, December 5-6, 2013, Bangalore, India, 2013.
[33]
R. Saha et al., "Suction and Pressure Side Film Cooling Influence on Vane Aero Performance in a Transonic Annular Cascade," in Proceedings of the ASME Turbo Expo, 2013.
[34]
R. Saha et al., "Experimental studies of leading edge contouring influence on secondary losses in transonic turbines," in ASME Turbo Expo 2012 : Turbine Technical Conference and Exposition, 2012, pp. 1109-1119.
[35]
J. Fridh, B. Laumert and T. Fransson, "Forced Response in axial turbines under the influence of partial admission," in ASME Turbo Expo 2012 - Turbine Technical Conference and Exposition, Copenhagen, June 11-15, 2012 : Volume 7, Issue PARTS A AND B, 2012, 2012, pp. 1419-1429.
[36]
M. Petrov et al., "High-Speed Steam Turbine Systems For Small-Scale Power Generation Applications," in Proceedings of the 20th International Conference on Nuclear Engineering collocated with the ASME 2012 Power Conference : ICONE20-POWER2012, American Society of Mechanical Engineers ASME, 2012, pp. 651-657.
[37]
M. Petrov et al., "High-speed Steam Turbine Systems for Distributed Generation Applications," in Proceedings of the ASME 2012 Power Conference. Power 2012, 2012, p. 7.
[38]
L. El-Gabry et al., "Measurements of Hub Flow Interaction on Film Cooled Nozzle Guide Vane in Transonic Annular Cascade," in Proceedings of the ASME Turbo Expo, 2012.
[39]
H. Noor et al., "INVESTIGATION OF ONE-DIMENSIONAL TURBINE DESIGN PARAMETERS WITH RELATION TO COOLING PARAMETERS FOR A HIGH PRESSURE INDUSTRIAL GAS TURBINE STAGE," in 9TH EUROPEAN CONFERENCE ON TURBOMACHINERY : FLUID DYNAMICS AND THERMODYNAMICS, VOLS I AND II, 2011, pp. 557-568.
[40]
H. Noor et al., "Investigation of one-dimensional turbine design parameters with relation to cooling parameters for high pressure industrial gas turbine stage," in The 9th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, 2011.
[41]
T. Yasa et al., "Performance of a nozzle guide vane in subsonic and transonic regimes tested in an annular sector," in Proceedings of the ASME Turbo Expo 2010 : Power for Land, Sea, and Air, 2010, pp. 1457-1467.
[42]
N. Baagherzadeh Hushmandi et al., "Numerical Study of Unsteady Flow Phenomena in a Partial Admission Axial Steam Turbine," in Proceedings of ASME Turbo EXPO 2008, 2008, pp. 713-722.
[43]
J. Fridh, R. Wikström and T. Fransson, "DYNAMIC FEATURES OF PARTIAL ADMISSION : OUTCOMES FROM ROTATING MEASUREMENTS," in Euroturbo 7 : Proceedings of the 7th European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics, 2007, pp. 451-462.
[44]
J. Fridh, R. Wikström and T. Fransson, "Dynamic features of partial admission: Outcomes from rotating measurements," in Proceedings of the 7th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, ETC 2007, 2007.
[45]
N. Baagherzadeh Hushmandi et al., "Numerical Investigation of Partial Admission Phenomena at Midspan of an Axial SteamTurbine," in Proceedings of 7th European Conference on Turbomachinery,Fluid Dynamics and Thermodynamics, 2007.
[46]
N. Baagherzadeh Hushmandi et al., "Numerical investigation of partial admission phenomena at midspan of an axial steam turbine," in Proceedings of the 7th European Conference on Turbomachinery: Fluid Dynamics and Thermodynamics, ETC 2007, 2007.
[47]
D. Vogt, J. Fridh and T. Fransson, "Design and Construction of a New Modular Wind Tunnel System," in 18th Symposium on Measuring Techniques in Transonic and Supersonic Flows in Cascades and Turbomachines. Thessaloniki, Greece. 21-22 September 2006, 2006.
[48]
J. Fridh et al., "An experimental study on partial admission in a two-stage axial air test turbine with numerical comparisons," in Proceedings of the ASME Turbo Expo 2004, 2004, pp. 1285-1297.
[49]
M. Salomon Popa et al., "Gas turbine simulations in the computerized educational program CompEduHPT : Three case studies," in American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 2003, pp. 741-748.
[50]
M. Salomon Popa et al., "Gas turbine simulations in the computerized educational program CompEduHPT : Educational aspects," in American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI, 2003, pp. 733-739.
Icke refereegranskade
Konferensbidrag
[51]
S. Thantla et al., "Characterization of an organic Rankine cycle system for waste heat recovery from heavy-duty engine coolant and exhaust," in 5th International symposium on ORC power systems, 9 – 11 September 2019, Athens, 2019.
[52]
J. Fridh and J. Östlund, "On the use of methane in rocket nozzle cooling channels : Bench scale trials," in Space Propulsion Conference 2018, organized by 3AF and ESA, 2018.
[53]
J. Dahlqvist and J. Fridh, "A Hands-On Student Lab for the Relation Between Unsteady Aerodynamics and Structural Dynamics," in XXIII Biannual Symposium on Measuring Techniques in Turbomachinery Transonic and Supersonic Flow in Cascades and Turbomachines Stuttgart, Germany 1 - 2 September 2016, 2016.
[54]
R. Saha and J. Fridh, "Aerodynamic Investigation of External Cooling and Applicability of Superposition," in 11th EUROPEAN CONFERENCE ON TURBOMACHINERY FLUID DYNAMICS AND THERMODYNAMICS, 2015.
[55]
J. Dahlqvist, J. Fridh and T. H. Fransson, "TEST TURBINE INSTRUMENTATION FOR CAVITY PURGE INVESTIGATIONS," in The XXII Symposium on Measuring Techniques in Turbomachinery, Lyon, 4-5 September 2014, 2014.
[56]
A. Mironovs, P. Doronkins and J. Fridh, "MODELING OF VARIABLE AERODYNAMIC FORCES IN TURBINE BASED ON EXPERIMENTAL DATA," in Proceedings of the 12th International Symposium on Unsteady Aerodynamics, Aeroacoustics & Aeroelasticity of Turbomachines ISUAAAT12 1-4 September 2009, Imperial College London, UK, 2009.
[57]
D. Vogt, J. Fridh and T. Fransson, "CHARACTERIZATION AND FIRST APPLICATION OF A THIN-FILM ELECTRET UNSTEADY PRESSURE MEASUREMENT TECHNIQUE," in XIX Biannual Symposium on Measuring Techniques in Turbomachinery : Transonic and Supersonic Flow in Cascades and Turbomachines, 2008, pp. 1-5.
[58]
J. Fridh et al., "REDUNDANT ROTATING MEASUREMENTS IN AN AXIAL COLD FLOW TEST TURBINE : Development and Procedure," in The XVIII Symposium on Measuring Techniques in Turbomachinery, Thessaloniki, Greece 2006, 2006.
Avhandlingar
[59]
J. Fridh, "Experimental Investigation of Performance, Flow Interactions and Rotor Forcing in Axial Partial Admission Turbines," Doctoral thesis Stockholm : KTH Royal Institute of Technology, Trita-KRV, 12:01, 2012.
Proceedings (redaktörskap)
[60]
"Unsteady Forces of Rotor Blades in Full and Partial Admission Turbines," New York, ASME International, PROCEEDINGS OF THE ASME TURBO EXPO, 2010.
Senaste synkning med DiVA:
2024-05-05 03:25:12