Publications by Luca Peretti
Refereegranskade
Artiklar
[1]
Z. Li et al., "Analytical Analysis of Quasi-Halbach Array Permanent-Magnet Motors Based on Field Separation Theory," IEEE Transactions on Transportation Electrification, pp. 1-1, 2024.
[2]
G. Falk Olson et al., "Enabling Variable Phase-Pole Drives with the Harmonic Plane Decomposition," IEEE Access, vol. 12, pp. 40049-40063, 2024.
[3]
Z. Li et al., "Hybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors," IEEE Transactions on Transportation Electrification, vol. 10, no. 1, pp. 1388-1397, 2024.
[4]
Z. Li et al., "Hybrid Analytical Model of Permanent Magnet Linear Motor Considering Iron Saturation and End Effect," IEEE transactions on energy conversion, pp. 1-10, 2024.
[5]
Y. Wu et al., "Open Fault Detection in Variable Phase-Pole Machines based on Harmonic Plane Decomposition," IEEE transactions on power electronics, 2024.
[6]
Z. Li, X. Huang and L. Peretti, "The Scalable Analytical Model for Calculating the Magnetic Field of Surface-Mounted Permanent Magnet Motor," IEEE Transactions on Industrial Electronics, pp. 1-11, 2024.
[7]
O. I. U. Haq et al., "Generalized Harmonic Injection Strategy for Multiphase Induction Machine Control," IEEE transactions on energy conversion, pp. 1-10, 2023.
[8]
G. Zanuso, S. L. S. Kumar and L. Peretti, "Interturn Fault Detection in Induction Machines Based on High-Frequency Injection," IEEE Transactions on Industrial Electronics, pp. 10639-10647, 2023.
[9]
D. Li, P. Kakosimos and L. Peretti, "Machine-Learning-Based Condition Monitoring of Power Electronics Modules in Modern Electric Drives," IEEE POWER ELECTRONICS MAGAZINE, vol. 10, no. 1, pp. 58-66, 2023.
[10]
G. Falk Olson, Y. Wu and L. Peretti, "Parameter Estimation of Multiphase Machines Applicable to Variable Phase-Pole Machines," IEEE transactions on energy conversion, vol. 38, no. 4, pp. 2822-2831, 2023.
[11]
Y. Wu, G. Falk Olson and L. Peretti, "Pole-Transition Control of Variable-Pole Machines Using Harmonic-Plane Decomposition," IEEE Transactions on Industrial Electronics, vol. 70, no. 8, pp. 7753-7760, 2023.
[12]
A. Zhao, G. Zanuso and L. Peretti, "Transient thermal models of induction machines under Inter-turn short-circuit fault conditions," IET Electric Power Applications, vol. 17, no. 10, pp. 1304-1320, 2023.
[13]
M. Tilahune et al., "Validation of FEM-Based Parameter Estimation for Variable Phase-Pole Induction Machines," IEEE transactions on energy conversion, vol. 38, no. 4, pp. 2310-2317, 2023.
[14]
G. Zanuso and L. Peretti, "Accelerated aging procedure and online method for stator insulation monitoring of induction motors," IEEE transactions on energy conversion, pp. 1-8, 2022.
[15]
G. Zanuso and L. Peretti, "Evaluation of High-Frequency Current Ringing Measurements for Insulation Health Monitoring in Electrical Machines," IEEE transactions on energy conversion, vol. 37, no. 4, pp. 2637-2644, 2022.
[16]
A. Chiche et al., "Feasibility and impact of a Swedish fuel cell-powered rescue boat," Ocean Engineering, vol. 234, pp. 109259-109259, 2021.
[17]
E. Molsa et al., "Standstill Identification of an Induction Motor Model Including Deep-Bar and Saturation Characteristics," IEEE transactions on industry applications, vol. 57, no. 5, pp. 4924-4932, 2021.
[18]
R. Antonello et al., "Self-commissioning calculation of dynamic models for synchronous machines with magnetic saturation using flux as state variable," The Journal of Engineering, no. 17, pp. 3609-3613, 2019.
[19]
G. Zanuso, L. Peretti and P. Sandulescu, "Model-based flux weakening strategy for synchronous machines without additional regulators," IET Electric Power Applications, vol. 12, no. 9, pp. 1283-1290, 2018.
[20]
L. Peretti et al., "Robust harmonic detection, classification and compensation method for electric drives based on the sparse FFT and the Mahalanobis distance," IET Electric Power Applications, vol. 11, no. 7, pp. 1177-1186, 2017.
[21]
P. Tenca and L. Peretti, "Carrier-less fault-tolerant stochastic synthesis in multi-cell multi-level converters : a central limit approach to highly-dimensional power electronic systems," IET Power Electronics, vol. 9, no. 6, pp. 1153-1162, 2016.
[22]
R. Antonello et al., "Hierarchical scaled–states direct predictive control of synchronous reluctance motor drives," IEEE Transactions on Industrial Electronics, vol. 63, no. 8, pp. 5176-5185, 2016.
[23]
G. Zanuso, L. Peretti and M. Zigliotto, "Permanent magnet synchronous machines flux linkage estimation with zero steady-state error and its field-programmable gate array implementation," IET Electric Power Applications, vol. 9, no. 4, pp. 332-343, 2015.
[24]
L. Peretti, P. Sandulescu and G. Zanuso, "Self-commissioning of flux-linkage curves of synchronous reluctance machines in quasi-standstill condition," IET Electric Power Applications, vol. 9, no. 9, pp. 642-651, 2015.
[25]
L. Peretti and M. Zigliotto, "Automatic procedure for induction motors parameters estimation at standstill," IET Electric Power Applications, vol. 6, no. 4, pp. 214-224, 2012.
[26]
S. Bolognani, L. Peretti and M. Zigliotto, "Online MTPA Control Strategy for DTC Synchronous-Reluctance-Motor Drives," IEEE transactions on power electronics, vol. 26, no. 1, pp. 20-28, 2011.
[27]
S. Vitturi et al., "Real-time Ethernet networks for motion control," Computer Standards & Interfaces, vol. 33, no. 5, pp. 465-476, 2011.
[28]
S. Bolognani et al., "Commissioning of electromechanical conversion models for high dynamic PMSM drives," IEEE Transactions on Industrial Electronics, vol. 57, no. 3, pp. 986-993, 2010.
[29]
S. Bolognani et al., "Design and implementation of model predictive control for electrical motor drives," IEEE Transactions on Industrial Electronics, vol. 56, no. 6, pp. 1925-1936, 2009.
[30]
S. Bolognani, L. Peretti and M. Zigliotto, "Parameter sensitivity analysis of an improved open-loop speed estimate for induction motor drives," IEEE transactions on power electronics, vol. 23, no. 4, pp. 2127-2135, 2008.
[31]
S. Bolognani, L. Peretti and M. Zigliotto, "Repetitive-control-based self-commissioning procedure for inverter non-idealities compensation," IEEE transactions on industry applications, vol. 44, no. 5, pp. 1587-1596, 2008.
[32]
N. Bianchi et al., "The steering effect - PM motor drives for automotive systems," IEEE Industry Applications Magazine, vol. 14, no. 2, pp. 40-48, 2008.
Konferensbidrag
[33]
X. Lin et al., "A Fixed-Time Convergence Sliding Mode Observer Based Model-Free Predictive Current Control for PMSMs," in IECON 2023 - 49th Annual Conference of the IEEE Industrial Electronics Society, 2023.
[34]
Z. Li, N. Honeth and L. Peretti, "Design Comparison of Outer- and Inner-Rotor Permanent Magnet Motors for Hydrofoil Boat," in 2023 IEEE International Electric Machines and Drives Conference, IEMDC 2023, 2023.
[35]
Y. Wu and L. Peretti, "Detection of Multiple Open Faults in Variable Phase-Pole Machines based on Harmonic Plane Decomposition," in 2023 IEEE 14th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), 2023.
[36]
O. Ikram Ul Haq, L. Peretti and M. Hinkkanen, "Estimation of Equivalent Circuit Parameters of Multiphase Induction Machines by Exploitation of Space Harmonic Relations," in 2023 IEEE International Electric Machines & Drives Conference (IEMDC) : San Francisco, CA, USA, 2023.
[37]
O. Ikram Ul Haq et al., "Online Winding Reconfiguration of a Multiphase Stator," in 2023 IEEE 14th International Conference on Power Electronics and Drive Systems (PEDS), 2023, pp. 07-10.
[38]
G. Falk Olson and L. Peretti, "Parameter Estimation of Multiphase Induction Machines with Inter-Plane Cross Saturation : Analysis and Improvement," in IECON 2023 : 49th Annual Conference of the IEEE Industrial Electronics Society, 2023.
[39]
M. Tilahune, L. Peretti and M. Mamo, "Performance Analysis of Variable Phase-Pole Induction Machine for Electric Traction Application : Finite Element Method," in Proceedings of the 16th IEEE AFRICON, AFRICON 2023, 2023.
[40]
Y. Wu and L. Peretti, "Pole Transition Under Open Phase Fault Conditions in a Variable Pole Machine," in IECON 2023 - 49th Annual Conference of the IEEE Industrial Electronics Society, 2023.
[41]
L. Tiitinen et al., "motulator : Motor Drive Simulator in Python," in 2023 IEEE International Electric Machines and Drives Conference, IEMDC 2023, 2023.
[42]
R. Raj, P. Subramaniyane and L. Peretti, "Design of a Variable Phase-Pole Induction Machine for Electric Vehicle Applications," in 2022 International Conference on Electrical Machines, ICEM 2022, 2022, pp. 976-982.
[43]
Y. Wu, G. Falk Olson and L. Peretti, "Fault Detection in Variable Phase-Pole Machines based on Harmonic Plane Decomposition," in Proceedings 48th Annual Conference of the Industrial Electronics Society, IECON 2022, 2022.
[44]
G. Zanuso et al., "Induction Machine Analysis with Extensive Stator Interturn Fault Conditions," in 11th International Conference on Power Electronics, Machines and Drives (PEMD 2022), 2022.
[45]
G. Falk Olson and L. Peretti, "Parameter Estimation of Multiphase Machines Applicable to Variable Phase-Pole Machines," in 2022 International Conference on Electrical Machines (ICEM), 2022, pp. 949-955.
[46]
Y. Wu et al., "FEM-based Parameter Estimation for a Variable Phase-Pole Induction Machine," in The 23rd European Conference on Power Electronics and Applications (EPE2021), 2021.
[47]
R. Kanchan, O. Ikram Ul Haq and L. Peretti, "Comparative assessment of voltage modulation methods for asymmetric six-phase machines," in 2020 22nd European Conference on Power Electronics and Applications, EPE 2020 ECCE Europe, 2020.
[48]
G. Falk Olson et al., "Harmonic Plane Decomposition : An Extension of the Vector-Space Decomposition - Part II," in Proceedings of The 46th Annual Conference of the IEEE Industrial Electronics Society, IECON 2020, 2020, pp. 991-996.
[49]
Y. Wu et al., "Harmonic Plane Decomposition: An Extension ofthe Vector-Space Decomposition - Part I," in Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society IECON 2020, 2020.
[50]
G. Zanuso et al., "Multi-drive control and condition monitoring in networked electric drives with EtherCAT," in Proceedings - 2020 International Conference on Electrical Machines, ICEM 2020, 2020, pp. 1178-1184.
[51]
M. Giuliato et al., "Sensorless control for a synchronous reluctance motor based on current oversampling using standard PWM excitation," in IET Conference Publications, 2020, pp. 13-18.
[52]
M. Giuliato et al., "Sensorless control for a synchronous reluctance motorbased on current oversampling using standard PW Mexcitation," in Proceedings of the 9th IET International Conference on Power Electronics, Machines and Drives (PEMD), 2020.
[53]
E. Mölsä et al., "Standstill self-commissioning of an induction motor drive," in Proceedings of the IEEE Energy Conversion Congress & Expo (ECCE), 2020.
[54]
G. Zanuso et al., "Networked electric drives in the Industry 4.0," in Proceedings of the 2018 21st International Conference on Electrical Machines and Systems (ICEMS), 2018, pp. 724-729.
[55]
R. Antonello et al., "Self-commissioning calculation of dynamic models for synchronous machines with magnetic saturation using flux as state variable," in Proceedings of the 8th IET International Conference on Power Electronics, Machines and Drives (PEMD), 2018, pp. 1-6.
[56]
F. Tinazzi et al., "On the true maximum efficiency operations of synchronous motor drives," in Proceedings of the International Conference on Power Electronics and Drive Systems, 2017, pp. 1043-1048.
[57]
M. Pathmanathan and L. Peretti, "Real-time signal frequency analysis in variable speed drives using the sparse fast Fourier transform (sFFT)," in 2017 IEEE International Conference on Industrial Technology (ICIT), 2017, pp. 1053-1058.
[58]
O. Ikram ul Haq and L. Peretti, "Robust automatic segregation of harmonics in electric drives by means of the Mahalanobis distance," in 2017 IEEE International Electric Machines and Drives Conference (IEMDC), 2017, pp. 1-8.
[59]
G. Zanuso, L. Peretti and P. Sandulescu, "Model-based synchronous machine control with compensation of model inaccuracies and instantaneous flux weakening capabilities," in Proceedings of the 8th IET International Conference on Power Electronics, Machines and Drives (PEMD), 2016, pp. 1-6.
[60]
G. Zanuso, L. Peretti and P. Sandulescu, "Stator reference frame approach for DC injection-based stator resistance estimation in electric drives," in Proceedings of the 11th IEEE International Conference on Power Electronics and Drive Systems (PEDS), 2015, pp. 867-872.
[61]
L. Peretti, "Active torque harmonic compensation for wind turbine drive trains," in 7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014), 2014, pp. 1-6.
[62]
L. Peretti, "Digital integrators for condition monitoring : a DC and multitone signal analysis," in 2014 International Power Electronics Conference, IPEC-Hiroshima - ECCE Asia 2014, 2014, pp. 3111-3118.
[63]
M. Carraro, M. Zigliotto and L. Peretti, "FPGA-based hierarchical finite-states predictive control for PMSM drives," in Proceedings of the 7th IET International Conference on Power Electronics, Machines and Drives (PEMD), 2014, pp. 1-6.
[64]
L. Peretti, V. Särkimäki and J. Fabér, "A wind turbine emulator for generator control algorithm development," in 2013 IEEE International Conference on Industrial Technology (ICIT), 2013, pp. 228-233.
[65]
P. Tenca and L. Peretti, "Fault tolerant cost-effective carrierless stochastic synthesis of voltages and currents in multi-Cell multilevel converters via the central limit theorem," in 2013 IEEE Energy Conversion Congress and Exposition, ECCE 2013, 2013, pp. 1732-1739.
[66]
L. Peretti and M. Zigliotto, "Combined current/voltage model with inductance mismatch compensation for on-line estimation of flux linkages in permanent magnet and synchronous reluctance motor drives," in 6th IET International Conference on Power Electronics, Machines and Drives (PEMD 2012), 2012, pp. 1-6.
[67]
L. Peretti and V. Särkimäki, "Mechanical drive train emulation by means of electrical drives - a generalised approach," in IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society, 2012, pp. 1878-1883.
[68]
A. Costabeber et al., "A speed loop autotuning method based on signal injection for electrical drives," in Proceedings of the 5th Power Electronics, Machines and Drives (PEMD) International Conference, 2010, pp. 1-6.
[69]
K. Sakata et al., "Enhanced speed and current Control of PMSM drives by perfect tracking algorithms," in 2010 International Power Electronics Conference - ECCE Asia -, IPEC 2010, 2010, pp. 587-592.
[70]
L. Peretti and M. Zigliotto, "FPGA-based voltage measurements in AC drives," in 19th International Conference on Electrical Machines, ICEM 2010, 2010, pp. 1-6.
[71]
L. Peretti and M. Zigliotto, "Identification of mechanical load for electrical drive commissioning - labelling machine case study," in IEEE EUROCON 2009, 2009, pp. 810-816.
[72]
S. Bolognani et al., "Combined speed and current model predictive control with inherent field weakening features for PMSM drives," in Proceedings of the 14th IEEE Mediterranean Electrotechnical Conference (MELECON), 2008, pp. 472-478.
[73]
S. Bolognani et al., "Parameter sensitivity analysis of two low-cost sensorless induction motor drives," in Proceedings of the 39th IEEE Power Electronics Specialists Conference, 2008, pp. 43-49.
[74]
L. Fazia, L. Peretti and M. Zigliotto, "Repetitive control and virtual bleeder resistor for AC generator sets with harmonic-sensitive loads," in Proceedings of the 4th IET Power Electronics, Machines and Drives (PEMD) International Conference, 2008, pp. 144-148.
[75]
S. Bolognani et al., "Sensorless V-type vector-controlled IM drive with inherent flux-weakening capability," in 4th IET International Conference on Power Electronics, Machines and Drives (PEMD 2008)2008, 2008, pp. 465-469.
[76]
S. Bolognani, L. Peretti and M. Zigliotto, "A novel open-loop speed estimation technique for low-cost IM drives," in Proceedings of the International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) and ELECTROMOTION 2007 Joint Conference, 2007, pp. 754-759.
[77]
S. Bolognani, L. Peretti and M. Zigliotto, "High dynamic electromechanical conversion model for PMSM drives," in Proceedings of the 33rd Annual Conference of the IEEE Industrial Electronics Society (IECON), 2007, pp. 1003-1008.
[78]
S. Bolognani, L. Peretti and M. Zigliotto, "Inverter non-idealities override by repetitive control," in Proceedings of the IEEE International Electrical Machines and Drives Conference (IEMDC), 2007, pp. 71-76.
[79]
S. Bolognani et al., "Modelling and design of a direct-drive lift control with rope elasticity and estimation of starting torque," in IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society, 2007, pp. 828-832.
[80]
R. Petrella et al., "Speed measurement algorithms for low-resolution incremental encoder equipped drives : a comparative analysis," in 2007 International Aegean Conference on Electrical Machines and Power Electronics, 2007, pp. 780-787.
[81]
L. Peretti and M. Zigliotto, "A force feedback system for steer-by-wire applications based on low-cost MR fluids - design hints," in 3rd IET International Conference on Power Electronics, Machines and Drives (PEMD 2006, 2006, pp. 469-473.
[82]
S. Bolognani et al., "Improvements in power line communication reliability for electric drives by random PWM techniques," in Proceedings of the 32nd Annual Conference of the IEEE Industrial Electronics Society (IECON), 2006, pp. 2307-2312.
[83]
C. Bernard et al., "Steering chain HIL simulator for steer-by-wire systems," in Proceedings of the 12th International Power Electronics and Motion Control Conference (EPE-PEMC), 2006, pp. 1784-1789.
Patent
Patent
[84]
[85]
M. Beniakar and L. Peretti, "Double-stator PM machine with 3rd order current harmonic injection," us US2020228041A1, 2019.
[86]
L. Peretti and G. Zanuso, "A power system including a multi-phase electrical machine," European Patent Office EP3629472A1 (2020-04-01), 2018.
[87]
M. Beniakar and L. Peretti, "Control and drive of a rotating machine with an inner and an outer stator," European Patent Office EP3540924A1, 2018.
[88]
J. Islam and L. Peretti, "Method of controlling an electrical machine," se European Patent Office EP3618268A1, 2018.
[89]
O. Ikram ul Haq and L. Peretti, "Method of controlling an electrical machine," us US2020144947A1, 2018.
[90]
L. Peretti et al., "Method and controller for determining an undesired condition in an electrical drive system," us 9829540B2 (2017-11-28), 2016.
[91]
P. Sandulescu, G. Zanuso and L. Peretti, "Method and device for detecting the presence of a permanent magnet of a rotor of a synchronous machine," us 10291165B2 (2019-05-14), 2016.
[92]
L. Peretti and G. Zanuso, "Method and controller for controlling a synchronous machine," European Patent Office EP 3104520 B1 (2021-02-17), 2015.
[93]
T. Rogg and L. Peretti, "Method and system for estimating differential inductances in an electrical machine," us 9692339B2 (2017-06-27), 2015.
[94]
L. Peretti and D. Svechkarenko, "Self-commissioning procedure for inductance estimation in an electrical machine," us 9379654B2 (2016-06-28), 2014.
[95]
L. Peretti, "Method and controller for damping vibrations in a wind power system," European Patent Office EP2754889B1 (2016-11-16), 2013.
[96]
H. Lendenmann et al., "Method and apparatus for control of electrical machines," us 8432121B2 (2013-04-30), 2011.
[97]
L. Peretti and M. Zigliotto, "Procedimento per stimare i parametri del circuito equivalente di un motore asincrono, particolarmente in un azionamento vettoriale sensorless," it ITVI20100066A1, 2010.
Senaste synkning med DiVA:
2024-05-04 01:06:57