Publikationer av Tianxiang Wang
Refereegranskade
Artiklar
[1]
M. Debertolis et al., "Analytical, experimental and numerical investigation on full-scale glulam trusses joined through birch plywood gusset plates," Journal of Building Engineering, vol. 113, 2025.
[2]
Y. Wang et al., "Compare EN 383 and ASTM D5764 on the embedment properties of plywood : Influence of test setups, specimen geometry, and loading procedures," Construction and Building Materials, vol. 490, 2025.
[3]
T. Wang et al., "Innovative timber connection systems with the combination of indoor adhesive application and on-site adhesive-free assembly," Engineering structures, vol. 342, 2025.
[4]
Y. Wang et al., "Plywood gussets in mechanical timber connections : quantify the stress spread angles under major tension loads," European Journal of Wood and Wood Products, vol. 83, no. 4, 2025.
[5]
Y. Wang et al., "Rebars as alternatives for smooth dowels in timber connections: An experimental, analytical and numerical study," Engineering structures, vol. 343, 2025.
[6]
M. Debertolis et al., "Rope effect in mechanical panel-timber connections: A comparison between screws and dowels," Engineering structures, vol. 332, 2025.
[7]
T. Wang et al., "Bonding strength between spruce glulam and birch plywood at different load-to-plywood face grain angles," European Journal of Wood and Wood Products, vol. 82, no. 5, s. 1407-1419, 2024.
[8]
Y. Wang et al., "Design of birch plywood as gusset plates in timber-timber uniaxial tension connections : Influence of fastener pattern, face grain orientation, and discussions based on the Whitmore effective width theory," Journal of Building Engineering, vol. 86, 2024.
[9]
H. Yang et al., "Distributed electrified heating for efficient hydrogen production," Nature Communications, vol. 15, no. 1, 2024.
[10]
Y. Wang et al., "Effect of moisture on the edgewise flexural properties of acetylated and unmodified birch plywood : a comparison of strength, stiffness and brittleness properties," European Journal of Wood and Wood Products, vol. 82, no. 2, s. 341-355, 2024.
[11]
T. Wang et al., "Glulam beams adhesively bonded by birch plywood plates in moment-resisting beam-to-beam connections," Engineering structures, vol. 302, s. 117471, 2024.
[12]
Y. Wang et al., "Glulam frame corner joints built of birch plywood and mechanical fasteners: An experimental, analytical, and numerical study," Engineering structures, vol. 310, 2024.
[13]
T. Wang et al., "Spreading angle analysis on the tensile capacities of birch plywood plates in adhesively bonded timber connections," Engineering structures, vol. 315, 2024.
[14]
T. Wang et al., "Adhesively bonded joints between spruce glulam and birch plywood for structural applications: experimental studies by using different adhesives and pressing methods," Wood Material Science & Engineering, vol. 18, no. 3, s. 1141-1150, 2023.
[15]
Y. Wang et al., "Birch plywood as gusset plates in glulam frame via mechanical connectors : A combined experimental and numerical study," Journal of Building Engineering, vol. 65, s. 105744, 2023.
[16]
Y. Wang et al., "Embedment behavior of dowel-type fasteners in birch plywood : Influence of load-to-face grain angle, test set-up, fastener diameter, and acetylation," Construction and Building Materials, vol. 384, 2023.
[17]
Y. Wang et al., "Testing and analysis of screw-connected moment joints consisting of glued-laminated timbers and birch plywood plates," Engineering structures, vol. 290, 2023.
[18]
Y. Wang et al., "Experimental investigation on mechanical properties of acetylated birch plywood and its angle-dependence," Construction and Building Materials, vol. 344, s. 128277, 2022.
[19]
T. Wang et al., "In-plane mechanical properties of birch plywood," Construction and Building Materials, vol. 340, 2022.
[20]
T. Wang et al., "Influence of face grain angle, size, and moisture content on the edgewise bending strength and stiffness of birch plywood," Materials & design, vol. 223, s. 111227, 2022.
[21]
T. Wang et al., "An innovative timber-steel hybrid beam consisting of glulam mechanically reinforced by means of steel rod : Analytical and preliminary numerical investigations," Journal of Building Engineering, vol. 43, 2021.
Konferensbidrag
[22]
T. Wang et al., "Glulam Frames Adhesively Bonded by Means of Birch Plywood Plates : Preliminary Investigations," i 13th World Conference on Timber Engineering, WCTE 2023, 2023, s. 1453-1461.
[23]
M. Debertolis et al., "Investigation on mechanical connections with birch plywood gusset plates," i 19th Annual Meeting of the Northern European Network for Wood Science and Engineering, 2023, s. 96-98.
[24]
Y. Wang et al., "Preliminary experimental investigations on frame corner joints built of glulam beams, birch plywood via mechanical connectors," i 19th Annual Meeting of the Northern European Network for Wood Science and Engineering, 2023.
[25]
Y. Wang et al., "Effect of moisture content on the angle-dependent edgewise flexural properties of unmodified and acetylated birch plywood," i Proceedings of the 18th Annual Meeting of the Northern European Network for Wood Science and Engineering (WSE), 2022.
[26]
T. Wang et al., "In-plane load-to-grain angle dependency of the compressive behavior of birch plywood," i CEM·2022 19th International Conference on Experimental Mechanics 17-21Jul 2022, Kraków, Poland, 2022.
[27]
Y. Wang et al., "Experimental study on an innovative timber-steel hybrid system," i Proceedings of the 17th Annual Meeting of the Northern European Network for Wood Science and Engineering, 2021, s. 152-154.
[28]
Y. Wang et al., "Mechanical properties of acetylaetd birch plywood loaded parallel to the face grain," i World Conference on Timber Engineering 2021, WCTE 2021, 2021.
[29]
Y. Wang et al., "Mechanical properties of acetylated birch plywood loaded parallel to the face grain," i World Conference on Timber Engineering WCTE2021, 2021.
[30]
T. Wang et al., "Multiple shear plane timber connections with birch plywood and dowel-type fasteners," i Proceedings of the 17th Annual Meeting of the Northern European Network for Wood Science and Engineering (WSE 2021), 2021.
[31]
Y. Wang et al., "Numerical investigations on an innovative timber-steel hybrid system," i Proceedings of the 16th Annual Meeting of the Northern European Network for Wood Science and Engineering – WSE2020, 2020, s. 92-94.
Icke refereegranskade
Konferensbidrag
[32]
T. Wang et al., "The Embedment Behavior of Acetylated and Unmodified Birch Plywood," i Proceedings of the Tenth European Conference on Wood Modification, 2022.
[33]
T. Wang et al., "Prediction of the tensile strength of birch plywood at varying angles to grain," i Proceedings of the 16th Annual Meeting of the Northern European Network for Wood Science and Engineering - WSE2020, 2020, s. 80-82.
Avhandlingar
[34]
T. Wang, "In-plane mechanical properties of birch plywood and its performance in adhesively bonded connections," Doktorsavhandling Stockholm : KTH Royal Institute of Technology, TRITA-ABE-DLT, 244, 2024.
[35]
T. Wang, "On the in-plane mechanical properties of birch plywood," Licentiatavhandling Stockholm : KTH Royal Institute of Technology, TRITA-ABE-DLT, 2247, 2022.
Övriga
[36]
M. Debertolis et al., "Analytical, experimental and numerical investigation on full-scale glulam trusses joined through birch plywood gusset plates," (Manuskript).
[37]
T. Wang et al., "Bonding strength between spruce glulam and birch plywood at different load-to-plywood face grain angles," (Manuskript).
[38]
[39]
[40]
T. Wang et al., "Spreading angle analysis on the tensile capacities of birch plywood plates in adhesively bonded timber connections," (Manuskript).
Senaste synkning med DiVA:
2025-10-06 22:42:20 UTC