Publications

Here are the 50 latest publications from the School of Industrial Engineering and Management (ITM).

[1]

Y. Li, L. Feng and Y. Wang, "A cascade control approach to active suspension using pneumatic actuators," Asian journal of control, pp. 1-19, 2019.

[2]

F. Hussain et al., "A modeling approach for low-temperature SOFC-based micro-combined heat and power systems," International Journal of Modern Physics B, vol. 33, no. 4, 2019.

[3]

K. Von Hausswolff and M. Weurlander, "A Deweyan approach to ‘practical thinking’ while programming - Encountering programming in a university lab setting.," in NERA conference, Uppsala, Sweden, 2019.

[4]

G. Kjellin, "A Case Study Exploring the Most Important Factors in Firm Rebranding," , 2019.

[5]

Y. Lyu et al., "A pin-on-disc study on the tribology of cast iron, sinter and composite railway brake blocks at low temperatures," Wear, pp. 48-52, 2019.

[6]

D. Linder et al., "A comparative study of microstructure and magnetic properties of a Ni–Fe cemented carbide : Influence of carbon content," International Journal of Refractory Metals and Hard Materials, vol. 80, pp. 181-187, 2019.

[7]

M. Wegener et al., "3E-Analysis of a Bio-Solar CCHP System for theAndaman Islands, India—A Case Study," Energies, vol. 12, no. 6, 2019.

[8]

F. Säger, "A Feasibility Study of an Automated Repair Process using Laser Metal Deposition (LMD) with a Machine Integrated Component Measuring Solutio," , 2019.

[9]

W. Ji, S. Yin and L. Wang, "A big data analytics based machining optimisation approach," Journal of Intelligent Manufacturing, vol. 30, no. 3, pp. 1483-1495, 2019.

[10]

M. Gutierrez et al., "A Mistuned Forced Response Analysis of an Embedded Compressor Blisk Using a Reduced-Order Model," Journal of engineering for gas turbines and power, vol. 141, no. 3, 2019.

[11]

L. Jinzhi et al., "A General Modeling Language Supporting Model-based Systems Engineering Formalisms (Part 1)," in 29th Annual INCOSE International Symposium, 2019.

[12]

G. Jiangmin et al., "A General Modeling Language Supporting Architecture driven and Code Generation (Part 2)," in 29th Annual INCOSE International Symposium, Orlando, Florida, 2019, July 20-25, 2019.

[13]

L. Jinzhi et al., "A Model-based Systems Engineering Tool-chain Supporting Automated Co-Simulation," Integrated Computer-Aided Engineering, 2019.

[14]

L. Jinzhi et al., "A Domain-specific Modeling Approach to Supporting Toolchain Development," , 2019.

[15]

L. Jinzhi, "A Framework for Cyber-physical System Tool-chain Development : A Service-oriented and Model-based Systems Engineering Approach," Doctoral thesis Stockholm : KTH Royal Institute of Technology, TRITA, 2019:19, 2019.

[16]

A. C. de Ferreira and F. F. Nerini, "A Framework for Implementing and Tracking Circular Economy in Cities : The Case of Porto," Sustainability, vol. 11, no. 6, 2019.

[17]

Y. Lyu et al., "A PIN-ON-DISC STUDY ON THE FRICTION, WEAR AND AIRBORNE PARTICLE EMISSION FROM RECYCLED BRAKE PAD MATERIAL," in Eurobrake 2019, 2019.

[18]

E. Susur and E. Karakaya, "A critique on the 'sustainability' assumption of the sustainability transitions literature," in International Sustainability Transitions Conference (Canada),Sunday, June 23 to Wednesday, June 26, 2019 CARLETON UNIVERSITY, OTTAWA, CANADA, 2019.

[19]

C. Funke and D. Jonsson, "A Framework for Implementing Simulation-Driven Design," , 2019.

[20]

M. L. Fascì and A. Lazzarotto, "A novel model for the estimation of thermal influence of neighbouring borehole heat exchangers," in EUROPEAN GEOTHERMAL CONGRESS 2019 : THE HAGUE, 11-14 JUNE 2019, 2019.

[21]

P. Ni et al., "A Kinetic Model of Mass Transfer and Chemical Reactions at a Steel/Slag Interface under Effect of Interfacial Tensions," ISIJ International, vol. 59, no. 5, pp. 737-748, 2019.

[22]

G. Riva, G. Perricone and J. Wahlström, "A Multi-Scale Simulation Approach to Investigate Local Contact Temperatures for Commercial Cu-Full and Cu-Free Brake Pads," Lubricants, vol. 7, no. 9, 2019.

[23]

P. Reu et al., "A 61% lighter cell culture dish to reduce plastic waste," PLoS ONE, vol. 14, no. 4, 2019.

[24]

J. Buckley et al., "A comparison of Swedish and Irish secondary students’ conceptions of engineers and engineering using the Draw-an-Engineer Test," in 126th ASEE Annual Conference and Exposition, 2019.

[25]

G. Qin et al., "A novel face-centered-cubic high-entropy alloy strengthened by nanoscale precipitates," Scripta Materialia, vol. 172, pp. 51-55, 2019.

[26]

G. Norman, "A Critical Review of the UNDP Guyana Hinterland Rural and Poor Communities (HRPC) Project," , 2019.

[27]

M. Grimheden and E. Flening, "50 years of Mechatronics - what is next," in PROCEEDINGS OF THE 2019 20TH INTERNATIONAL CONFERENCE ON RESEARCH AND EDUCATION IN MECHATRONICS (REM 2019), 2019.

[28]

Y. Lyu et al., "Friction, wear and airborne particle emission from Cu-free brake materials," Tribology International, vol. 141, 2020.

[29]

S. Yin, W. Ji and L. Wang, "A machine learning based energy efficient trajectory planning approach for industrial robots," in Procedia CIRP, 2019, pp. 429-434.

[30]

C. Xuan and W. Mu, "A phase-field model for the study of isothermal dissolution behavior of alumina particles into molten silicates," Journal of The American Ceramic Society, vol. 102, no. 11, pp. 6480-6497, 2019.

[31]

T. Lindquist et al., "A novel modular and dispatchable CSP Stirling system : Design, validation, and demonstration plans," in AIP Conference Proceedings, 2019.

[32]

Y. Benmakhlouf et al., "A methodology to assess the market potential and identify most promising business cases for small scale CSP plants with thermal energy storage," in AIP Conference Proceedings, 2019.

[33]

A. Akhlagi, "A Modelica-based framework for modeling and optimization of microgrids," , 2019.

[34]

M. Almqvist and C. Lundberg, "A Business Modelling Framework for the Front End of Innovation. : Customising a Guiding Material for an Early Phase of the Innovation Process for a Swedish Fintech Company.," , 2019.

[35]

J. Wahlström, "A pin-on-disc tribometer study of friction at low contact pressures and sliding speeds for a disc brake material combination," Results in Engineering, vol. 4, 2019.

[36]

L. Jinzhi et al., "A Domain-specific Modeling Approach Supporting Tool-chain Development with Bayesian Network Models," Integrated Computer-Aided Engineering, 2019.

[37]

Y. Li, K. H. Johansson and J. Mårtensson, "A hierarchical control system for smart parking lots with automated vehicles : Improve efficiency by leveraging prediction of human drivers," in Proceedings 2019 18TH EUROPEAN CONTROL CONFERENCE (ECC), 2019, pp. 2675-2681.

[38]

R. Liang Zhang and L. Rask, "A cost estimation of an industrial scale production of nanocellulose filaments utilizing PBCM and TRL : A case study at RISE Research Institutes of Sweden AB," , 2019.

[39]

R. Bojs, "A cultural perspective on leadership to face challenges with agile methods : A case study in the Nordic Banking Industry," , 2019.

[40]

K. Sliwinski, "A Machine Learning Approach to Predictively Determine Filter Clogging in a Ballast Water Treatment System," , 2019.

[41]

I.-E.-. Noor et al., "Performance assessment of chemical mechanical planarization wastewater treatment in nano-electronics industries using membrane distillation," Separation and Purification Technology, vol. 235, 2020.

[42]

J. Daglish, "A Prefeasibility Analysis of a PV Mini Grid with Ice Plant on Buvu Island in Lake Victoria," , 2019.

[43]

R. Laurenti and F. M. Barrios Acuña, "Exploring antecedents of behavioural intention and preferences in online peer-to-peer resource sharing : a Swedish university setting," Sustainable Production and Consumption, vol. 21, pp. 47-56, 2020.

[44]

R. Budianto, "A cost-optimal and geospatial analysis for the power system of Sierra Leone," , 2019.

[45]

D. Thinsz, "A Comparative Study of Machine Learning Algorithms for Short-Term Building Cooling Load Predictions," , 2019.

[46]

M. Svjatoha and B. Yosef Nezhad Arya, "A Gimbal Stabilizer : Self-stabilizing platform for holding objects horizontally stable," , 2019.

[47]

N. Jörgensen, "A Novel, Wave-based Control Architecture for Collaborative Haptic Virtual Environments," , 2019.

[48]

M. Ekman Rising, M. Lindgren and J. Packendorff, "Omgiven av instrumentalister : Har det akademiska medborgarskapet gått förlorat?," in Ledning, styrning och kontroll i högre utbildning, Mats Alvesson, Stefan Sveningsson Ed., Lund : Studentlitteratur AB, 2020.

[49]

K. Chen et al., "Optimisation of deformation properties in as-cast copper by microstructural engineering. Part II. Mechanical properties," Journal of Alloys and Compounds, vol. 812, 2020.

[50]

D. Tang et al., "Dual gradient direct ink writing for formation of kaolinite ceramic functionally graded materials," Journal of Alloys and Compounds, vol. 814, 2020.

Full list in the KTH publications portal