Skip to main content
To KTH's start page

50 latest publications

[1]
A. Enrico et al., "Cleanroom‐Free Direct Laser Micropatterning of Polymers for Organic Electrochemical Transistors in Logic Circuits and Glucose Biosensors," Advanced Science, 2024.
[2]
S. Lander et al., "Controlling the rate of posolyte degradation in all-quinone aqueous organic redox flow batteries by sulfonated nanocellulose based membranes: The role of crossover and Michael addition," Journal of Energy Storage, vol. 83, 2024.
[3]
X. Xu et al., "Metallic Wood through Deep-Cell-Wall Metallization : Synthesis and Applications," ACS Applied Materials and Interfaces, vol. 16, no. 17, pp. 22433-22442, 2024.
[4]
E. Zeglio et al., "Mixing Insulating Commodity Polymers with Semiconducting n‐type Polymers Enables High‐Performance Electrochemical Transistors," Advanced Materials, 2024.
[5]
H. Li et al., "Reevaluation of the adhesion between cellulose materials using macro spherical beads and flat model surfaces," Carbohydrate Polymers, vol. 332, pp. 121894-121894, 2024.
[6]
H. Taheri et al., "Selection of suitable cellulose nanofibers derived from eco-friendly sources for the production of lightweight cementitious composites with tuned rheological, mechanical, and microstructure properties," Cement & Concrete Composites, vol. 151, 2024.
[7]
R. Östmans et al., "Solidified water at room temperature hosting tailored fluidic channels by using highly anisotropic cellulose nanofibrils," Materials Today Nano, vol. 26, 2024.
[8]
M. F. Cortes Ruiz et al., "Structure-properties relationships of defined CNF single-networks crosslinked by telechelic PEGs," Carbohydrate Polymers, vol. 339, 2024.
[9]
H. Yang et al., "Study on the Rectification of Ionic Diode Based on Cross-Linked Nanocellulose Bipolar Membranes," Biomacromolecules, vol. 25, no. 3, pp. 1933-1941, 2024.
[10]
Z. Atoufi et al., "Synergistically stabilized wet foams from heat treated β-lactoglobulin and cellulose nanofibrils and their application for green foam production," Applied Materials Today, vol. 39, 2024.
[11]
J. Sethi et al., "Ultra-thin parylene-aluminium hybrid coatings on nanocellulose films to resist water sensitivity," Carbohydrate Polymers, vol. 323, pp. 121365, 2024.
[12]
K. Jain et al., "3D printable composites of modified cellulose fibers and conductive polymers and their use in wearable electronics," APPLIED MATERIALS TODAY, vol. 30, 2023.
[13]
A. Toldrà Filella, G. Chondrogiannis and M. Hamedi, "A 3D paper microfluidic device for enzyme-linked assays: Application to DNA analysis," Biotechnology Journal, vol. 18, no. 9, 2023.
[14]
J. Garemark et al., "Advancing Hydrovoltaic Energy Harvesting from Wood through Cell Wall Nanoengineering," Advanced Functional Materials, vol. 33, pp. 2208933, 2023.
[15]
N. Abbasi Aval et al., "Assessing the Layer-by-Layer Assembly of Cellulose Nanofibrils and Polyelectrolytes in Pancreatic Tumor Spheroid Formation," Biomedicines, vol. 11, no. 11, 2023.
[16]
M. S. Reid et al., "Dewatering of Micro- and Nanofibrillated Cellulose for Membrane Production," ACS Sustainable Chemistry and Engineering, vol. 11, no. 46, pp. 16428-16441, 2023.
[17]
Z. Wang et al., "Dynamic Networks of Cellulose Nanofibrils Enable Highly Conductive and Strong Polymer Gel Electrolytes for Lithium-Ion Batteries," Advanced Functional Materials, vol. 33, no. 30, 2023.
[18]
R. Östmans et al., "Elastoplastic behavior of anisotropic, physically crosslinked hydrogel networks comprising stiff, charged fibrils in an electrolyte," Soft Matter, vol. 19, no. 15, pp. 2792-2800, 2023.
[19]
T. Benselfelt et al., "Electrochemically Controlled Hydrogels with Electrotunable Permeability and Uniaxial Actuation," Advanced Materials, vol. 35, no. 45, 2023.
[20]
N. Kotov et al., "Elucidating the fine-scale structural morphology of nanocellulose by nano infrared spectroscopy," Carbohydrate Polymers, vol. 302, 2023.
[21]
F. Namata et al., "High Water Content Physically Cross-linked Hybrid Hydrogels Based on Polyester Dendrimers and Cellulose Nanofibrils : A Comprehensive Study," Chemistry of Materials, vol. 35, no. 20, pp. 8561-8573, 2023.
[22]
T. Chen et al., "High-rate, high-capacity electrochemical energy storage in hydrogen-bonded fused aromatics," Joule, vol. 7, no. 5, pp. 986-1002, 2023.
[23]
F. A. Sellman et al., "Hornification of cellulose-rich materials : A kinetically trapped state," Carbohydrate Polymers, vol. 318, 2023.
[24]
A. Abbadessa et al., "Layer-by-layer assembly of sustainable lignin-based coatings for food packaging applications," Progress in organic coatings, vol. 182, 2023.
[25]
M. Marcioni et al., "Layer-by-Layer-Coated Cellulose Fibers Enable the Production of Porous, Flame-Retardant, and Lightweight Materials," ACS Applied Materials and Interfaces, vol. 15, no. 30, pp. 36811-36821, 2023.
[26]
G. Lo Re et al., "Melt processable cellulose fibres engineered for replacing oil-based thermoplastics," Chemical Engineering Journal, vol. 458, pp. 141372, 2023.
[27]
P. Elf et al., "Molecular Dynamics Simulations of Cellulose and Dialcohol Cellulose under Dry and Moist Conditions," Biomacromolecules, vol. 24, no. 6, pp. 2706-2720, 2023.
[28]
A. E. Alexakis et al., "Nanolatex architectonics: Influence of cationic charge density and size on their adsorption onto surfaces with a 2D or 3D distribution of anionic groups," Journal of Colloid and Interface Science, vol. 634, pp. 610-620, 2023.
[29]
M. Nejstroem et al., "On Structural and Molecular Order in Cellulose Acetate Butyrate Films," Polymers, vol. 15, no. 9, 2023.
[30]
Y. Brusentsev et al., "Photocross-Linkable and Shape-Memory Biomaterial Hydrogel Based on Methacrylated Cellulose Nanofibres," Biomacromolecules, vol. 24, no. 8, pp. 3835-3845, 2023.
[31]
S. Buchmann et al., "Probabilistic cell seeding and non-autofluorescent 3D-printed structures as scalable approach for multi-level co-culture modeling," Materials Today Bio, vol. 21, pp. 100706-100706, 2023.
[32]
X. Yang et al., "Processing strategy for reduced energy demand of nanostructured CNF/clay composites with tailored interfaces," Carbohydrate Polymers, vol. 312, 2023.
[33]
A. Lopez-Guajardo et al., "Regulation of cellular contractile force, shape and migration of fibroblasts by oncogenes and Histone deacetylase 6," Frontiers in Molecular Biosciences, vol. 10, 2023.
[34]
L. Li et al., "Residual Strain and Nanostructural Effects during Drying of Nanocellulose/Clay Nanosheet Hybrids : Synchrotron X-ray Scattering Results," ACS Nano, vol. 17, no. 16, pp. 15810-15820, 2023.
[35]
X. Huang et al., "Semiconducting Conjugated Coordination Polymer with High Charge Mobility Enabled by "4+2" Phenyl Ligands," Journal of the American Chemical Society, vol. 145, no. 4, pp. 2430-2438, 2023.
[36]
T. Benselfelt et al., "The Colloidal Properties of Nanocellulose," ChemSusChem, vol. 16, no. 8, 2023.
[37]
K. Mystek et al., "The preparation of cellulose acetate capsules using emulsification techniques: High-shear bulk mixing and microfluidics," Nordic Pulp & Paper Research Journal, vol. 38, no. 4, pp. 593-605, 2023.
[38]
N. Asta et al., "The Use of Model Cellulose Materials for Studying Molecular Interactions at Cellulose Interfaces," ACS Macro Letters, vol. 12, no. 11, pp. 1530-1535, 2023.
[39]
M. Hanze et al., "Toward Continuous Molecular Testing Using Gold-Coated Threads as Multi-Target Electrochemical Biosensors," Biosensors, vol. 13, no. 9, 2023.
[40]
L. Li et al., "Ultrastrong Ionotronic Films Showing Electrochemical Osmotic Actuation," Advanced Materials, vol. 35, no. 45, 2023.
[41]
C. M. Subramaniyam et al., "Additive-free red phosphorus/Ti3C2TxMXene nanocomposite anodes for metal-ion batteries," Energy Advances, no. 12, pp. 999-1008, 2022.
[42]
M. Zhao et al., "Adsorption of paper strength additives to hardwood fibres with different surface charges and their effect on paper strength," Cellulose, vol. 29, no. 4, pp. 2617-2632, 2022.
[43]
N. Abbasi Aval et al., "An aligned fibrous and thermosensitive hyaluronic acid-puramatrix interpenetrating polymer network hydrogel with mechanical properties adjusted for neural tissue," Journal of Materials Science, vol. 57, no. 4, pp. 2883-2896, 2022.
[44]
J. Li et al., "Atomic-resolution structures from polycrystalline covalent organic frameworks with enhanced cryo-cRED," Nature Communications, vol. 13, no. 1, 2022.
[45]
M. Wohlert et al., "Cellulose and the role of hydrogen bonds : not in charge of everything," Cellulose, vol. 29, no. 1, pp. 1-23, 2022.
[46]
T. Chen et al., "Dimensionality Modulates Electrical Conductivity in Compositionally Constant One-, Two-, and Three-Dimensional Frameworks," Journal of the American Chemical Society, vol. 144, no. 12, pp. 5583-5593, 2022.
[47]
M. Zhao et al., "Effect of saturation adsorption of paper strength additives on the performance of paper," Nordic Pulp & Paper Research Journal, vol. 37, no. 4, pp. 624-635, 2022.
[48]
Y. Li et al., "Facile synthesis of a high-efficiency NiFe bimetallic catalyst without pre-reduction for the selective hydrogenation reaction of furfural," Catalysis Science & Technology, vol. 13, no. 2, pp. 457-467, 2022.
[49]
B. Rietzler et al., "Fundamental Insights on the Physical and Chemical Properties of Organosolv Lignin from Norway Spruce Bark.," Biomacromolecules, vol. 23, no. 8, pp. 3349-3358, 2022.
[50]
Y. Cui et al., "Hierarchical soot nanoparticle self-assemblies for enhanced performance as sodium-ion battery anodes," Journal of Materials Chemistry A, vol. 10, no. 16, pp. 9059-9066, 2022.