Publications by Dan Zenkert

Refereegranskade

Artiklar

[1]

Y. D. Yucel et al., "Enhancing structural battery performance: Investigating the role of conductive carbon additives in LiFePO<inf>4</inf>-Impregnated carbon fiber electrodes," Composites Science And Technology, vol. 251, 2024.

[2]

Y. D. Yucel et al., "LiFePO₄-coated carbon fibers as positive electrodes in structural batteries : Insights from spray coating technique," Electrochemistry communications, vol. 160, pp. 107670, 2024.

[3]

D. Zenkert et al., "Multifunctional carbon fibre composites using electrochemistry," Composites Part B : Engineering, vol. 273, 2024.

[4]

I. Katsivalis et al., "Strength analysis and failure prediction of thin tow-based discontinuous composites," Composites Science And Technology, vol. 245, 2024.

[5]

A. Ishfaq et al., "Multifunctional design, feasibility and requirements for structural power composites in future electric air taxis," Journal of composite materials, vol. 57, no. 4, pp. 817-827, 2023.

[6]

Y. D. Yucel et al., "Powder-impregnated carbon fibers with lithium iron phosphate as positive electrodes in structural batteries," Composites Science And Technology, vol. 241, pp. 110153, 2023.

[7]

R. Harnden et al., "Multifunctional Carbon Fiber Composites : A Structural, Energy Harvesting, Strain-Sensing Material," ACS Applied Materials and Interfaces, vol. 14, no. 29, pp. 33871-33880, 2022.

[8]

L. E. Asp et al., "A Structural Battery and its Multifunctional Performance," Advanced Energy and Sustainability Research, vol. 2, no. 3, 2021.

[9]

W. Johannisson et al., "A screen-printing method for manufacturing of current collectors for structural batteries," Multifunctional Materials, vol. 4, no. 3, pp. 035002, 2021.

[10]

R. Harnden, D. Zenkert and G. Lindbergh, "Potassium-insertion in polyacrylonitrile-based carbon fibres for multifunctional energy storage, morphing, and strain-sensing," Carbon, vol. 171, pp. 671-680, 2021.

[11]

W. Johannisson et al., "A residual performance methodology to evaluate multifunctional systems," Multifunctional Materials, vol. 3, no. 2, 2020.

[12]

J. Xu et al., "Characterization of the adhesive properties between structural battery electrolytes and carbon fibers," Composites Science And Technology, vol. 188, 2020.

[13]

W. Johannisson et al., "Shape-morphing carbon fiber composite using electrochemical actuation," Proceedings of the National Academy of Sciences of the United States of America, vol. 117, no. 14, pp. 7658-7664, 2020.

[14]

L. M. Schneider et al., "Bicontinuous Electrolytes via Thermally Initiated Polymerization for Structural Lithium Ion Batteries," ACS Applied Energy Materials, vol. 2, no. 6, pp. 4362-4369, 2019.

[15]

M. Burman, F. Stig and D. Zenkert, "Blister propagation in sandwich panels," Journal of Sandwich Structures and Materials, vol. 21, no. 5, pp. 1683-1699, 2019.

[16]

L. E. Asp et al., "Carbon Fibre Composite Structural Batteries: A Review," Functional Composites and Structures, 2019.

[17]

D. Zenkert and L. A. Carlsson, "Editorial," Journal of Sandwich Structures and Materials, vol. 21, no. 5, pp. 1619-1620, 2019.

[18]

K. Peuvot et al., "Lignin based electrospun carbon fiber anode for sodium ion batteries," Journal of the Electrochemical Society, vol. 166, no. 10, pp. A1984-A1990, 2019.

[19]

W. Johannisson and D. Zenkert, "Model of a structural battery and its potential for system level mass savings," Multifunctional Materials, 2019.

[20]

M. Zackrisson et al., "Prospective Life Cycle Assessment of a Structural Battery," Sustainability, vol. 11, no. 20, 2019.

[21]

G. Fredi et al., "Graphitic microstructure and performance of carbon fibre Li-ion structural battery electrodes," Multifunctional Materials, vol. 1, no. 1, 2018.

[22]

J. Hagberg et al., "Lithium iron phosphate coated carbon fiber electrodes for structural lithium ion batteries," Composites Science And Technology, vol. 162, pp. 235-243, 2018.

[23]

R. Harnden et al., "Multifunctional Performance of Sodiated Carbon Fibers," Journal of the Electrochemical Society, vol. 165, no. 13, pp. B616-B622, 2018.

[24]

W. Johannisson et al., "Multifunctional performance of a carbon fiber UD lamina electrode for structural batteries," Composites Science And Technology, vol. 168, pp. 81-87, 2018.

[25]

D. Zenkert and L. A. Carlsson, "Prof. Karl-Axel Olsson (1933-2018) Obituary," Journal of Sandwich Structures and Materials, vol. 20, no. 4, pp. 512-513, 2018.

[26]

F. Dionisi, R. Harnden and D. Zenkert, "A model to analyse deformations and stresses in structural batteries due to electrode expansions," Composite structures, vol. 179, pp. 580-589, 2017.

[27]

N. Ihrner et al., "Structural lithium ion battery electrolytes via reaction induced phase-separation," Journal of Materials Chemistry A, vol. 5, no. 48, pp. 25652-25659, 2017.

[28]

C. Schneider et al., "Bending energy absorption of self-reinforced poly(ethylene terephthalate) composite sandwich beams," Composite structures, vol. 140, pp. 582-589, 2016.

[29]

C. Schneider et al., "Impact response of ductile self-reinforced composite corrugated sandwich beams," Composites Part B : Engineering, vol. 99, pp. 121-131, 2016.

[30]

S. Poulikidou et al., "A material selection approach to evaluate material substitution for minimizing the life cycle environmental impact of vehicles," Materials & design, vol. 83, pp. 704-712, 2015.

[31]

C. Schneider et al., "Compression properties of novel thermoplastic carbon fibre and poly-ethylene terephthalate fibre composite lattice structures," Materials & Design, vol. 65, pp. 1110-1120, 2015.

[32]

P. Mårtensson, D. Zenkert and M. Åkermo, "Cost and weight efficient partitioning of composite automotive structures," Polymer Composites, 2015.

[33]

C. Schneider et al., "Dynamic compression response of self-reinforced poly(ethylene terephthalate) composites and corrugated sandwich cores," Composites. Part A, Applied science and manufacturing, vol. 77, pp. 96-105, 2015.

[34]

P. Mårtensson, D. Zenkert and M. Åkermo, "Effects of manufacturing constraints on the cost and weight efficiency of integral and differential automotive composite structures," Composite structures, vol. 134, pp. 572-578, 2015.

[35]

P. Mårtensson, D. Zenkert and M. Åkermo, "Integral versus differential design for high-volume manufacturing of composite structures," Journal of composite materials, vol. 49, no. 23, pp. 2897-2908, 2015.

[36]

P. Mårtensson, D. Zenkert and M. Åkermo, "Method for cost and weight-efficient material diversity and partitioning of a carbon fibre composite body structure," Proceedings of the Institution of mechanical engineers. Part D, journal of automobile engineering, 2015.

[37]

E. Jacques et al., "Piezo-Electrochemical Energy Harvesting with Lithium-Intercalating Carbon Fibers," ACS Applied Materials and Interfaces, vol. 7, no. 25, pp. 13898-13904, 2015.

[38]

M. N. Velea, P. Wennhage and D. Zenkert, "Multi-objective optimisation of vehicle bodies made of FRP sandwich structures," Composite structures, vol. 111, pp. 75-84, 2014.

[39]

S. Kazemahvazi, M. Nilsson and D. Zenkert, "Residual strength of GRP laminates with multiple randomly distributed fragment impacts," Composites. Part A, Applied science and manufacturing, vol. 60, pp. 66-74, 2014.

[40]

E. Jacques et al., "The effect of lithium-intercalation on the mechanical properties of carbon fibres," Carbon, vol. 68, pp. 725-733, 2014.

[41]

C. Schneider et al., "Compression and tensile properties of self-reinforced poly(ethylene terephthalate)-composites," Polymer testing, vol. 32, no. 2, pp. 221-230, 2013.

[42]

E. Jacques et al., "Expansion of carbon fibres induced by lithium intercalation for structural electrode applications," Carbon, vol. 59, pp. 246-254, 2013.

[43]

E. Jacques et al., "Piezo-electrochemical effect in lithium-intercalated carbon fibres," Electrochemistry communications, vol. 35, pp. 65-67, 2013.

[44]

J. Ekh, J. Schön and D. Zenkert, "Simple and efficient prediction of bearing failure in single shear, composite lap joints," Composite structures, vol. 105, pp. 35-44, 2013.

[45]

S. Kazemahvazi, B. P. Russell and D. Zenkert, "Impact of carbon fibre/epoxy corrugated cores," Composite structures, vol. 94, no. 11, pp. 3300-3308, 2012.

[46]

E. Jacques et al., "Impact of electrochemical cycling on the tensile properties of carbon fibres for structural lithium-ion composite batteries," Composites Science And Technology, vol. 72, no. 7, pp. 792-798, 2012.

[47]

F. Latourte et al., "Failure mechanisms in composite panels subjected to underwater impulsive loads," Journal of the mechanics and physics of solids, vol. 59, no. 8, pp. 1623-1646, 2011.

[48]

D. Zenkert and M. Burman, "Failure mode shifts during constant amplitude fatigue loading of GFRP/foam core sandwich beams," International Journal of Fatigue, vol. 33, no. 2, pp. 217-222, 2011.

[49]

D. Zenkert and M. Burman, "Fatigue of closed-cell foams in compression," Journal of Sandwich Structures and Materials, vol. 13, no. 4, pp. 467-478, 2011.

[50]

M. Kaufmann, D. Zenkert and M. Åkermo, "Material Selection for a Curved C-Spar Based on Cost Optimization," Journal of Aircraft, vol. 48, no. 3, pp. 797-804, 2011.

[51]

M. Hellqvist Kjell et al., "PAN-based carbon fiber negative electrodes for structural lithium-ion batteries," Journal of the Electrochemical Society, vol. 158, no. 12, pp. A1455-A1460, 2011.

[52]

H. Kolsters and D. Zenkert, "Buckling of laser-welded sandwich panels : ultimate strength and experiments," Journal of Engineering for the Maritime Environment (Part M), vol. 224, no. M1, pp. 29-45, 2010.

[53]

M. Kaufmann, D. Zenkert and M. Åkermo, "Cost/weight optimization of composite prepreg structures for best draping strategy," Composites. Part A, Applied science and manufacturing, vol. 41, no. 4, pp. 464-472, 2010.

[54]

M. Kaufmann, D. Zenkert and P. Wennhage, "Integrated cost/weight optimization of aircraft structures," Structural and multidisciplinary optimization (Print), vol. 41, no. 2, pp. 325-334, 2010.

[55]

S. Kazemahvazi, J. Kiele and D. Zenkert, "Tensile strength of UD-composite laminates with multiple holes," Composites Science And Technology, vol. 70, no. 8, pp. 1280-1287, 2010.

[56]

K. Zimmermann, D. Zenkert and M. Siemetzki, "Testing and analysis of ultra thick composites," Composites Part B : Engineering, vol. 41, no. 4, pp. 326-336, 2010.

[57]

S. Kazemahvazi and D. Zenkert, "Corrugated all-composite sandwich structures. Part 1 : Modeling," Composites Science And Technology, vol. 69, no. 7-8, pp. 913-919, 2009.

[58]

S. Kazemahvazi, D. Tanner and D. Zenkert, "Corrugated all-composite sandwich structures. Part 2 : Failure mechanisms and experimental programme," Composites Science And Technology, vol. 69, no. 7-8, pp. 920-925, 2009.

[59]

M. Kaufmann, T. Czumanski and D. Zenkert, "Manufacturing process adaptation for integrated cost/weight optimisation of aircraft structures," Plastics, rubber and composites, vol. 38, no. 2, pp. 162-166(5), 2009.

[60]

S. Kazemahvazi, D. Zenkert and M. Burman, "Notch and Strain Rate Sensitivity of Non-Crimp Fabric Composites," Composites Science And Technology, vol. 69, no. 6, pp. 793-800, 2009.

[61]

D. Zenkert and M. Burman, "Tension, compression and shear fatigue of a closed cell polymer foam," Composites Science And Technology, pp. 785-792, 2009.

[62]

C. Stamblewski, B. V. Sankar and D. Zenkert, "Analysis of three-dimensional quadratic failure criteria for thick composites using the direct micromechanics method," Journal of composite materials, vol. 42, no. 7, pp. 635-654, 2008.

[63]

M. Kaufmann, D. Zenkert and C. Mattei, "Cost optimization of composite aircraft structures including variable laminate qualities," Composites Science And Technology, vol. 68, no. 13, pp. 2748-2754, 2008.

[64]

H. Kolsters and D. Zenkert, "Buckling of laser-welded sandwich panels. Part 1 : Elastic buckling parallel to the webs," Journal of Engineering for the Maritime Environment (Part M), vol. 220, no. 2, pp. 69-79, 2006.

[65]

H. Kolsters and D. Zenkert, "Buckling of laser-welded sandwich panels. Part 2 : Elastic buckling normal to the webs," Journal of Engineering for the Maritime Environment (Part M), vol. 220, no. 2, pp. 81-94, 2006.

[66]

D. Zenkert, A. Shipsha and M. Burman, "Fatigue of closed cell foams," Journal of Sandwich Structures and Materials, vol. 8, no. 6, pp. 517-538, 2006.

[67]

A. Shipsha and D. Zenkert, "Compression-after-impact strength of sandwich panels with core crushing damage," Applied Composite Materials, vol. 12, no. 04-mar, pp. 149-164, 2005.

[68]

D. Zenkert et al., "Damage tolerance assessment of composite sandwich panels with localised damage," Composites Science And Technology, vol. 65, no. 15-16, pp. 2597-2611, 2005.

[69]

L. Fagerberg and D. Zenkert, "Effects of anisotropy and multiaxial loading on the wrinkling of sandwich panels," Journal of Sandwich Structures and Materials, vol. 7, no. 3, pp. 177-194, 2005.

[70]

L. Fagerberg and D. Zenkert, "Imperfection-induced wrinkling material failure in sandwich panels," Journal of Sandwich Structures and Materials, vol. 7, no. 3, pp. 195-219, 2005.

[71]

V. Rizov, A. Shipsha and D. Zenkert, "Indentation study of foam core sandwich composite panels," Composite structures, vol. 69, no. 1, pp. 95-102, 2005.

[72]

D. Zenkert, A. Shipsha and K. Persson, "Static indentation and unloading response of sandwich beams," Composites Part B : Engineering, vol. 35, no. 08-jun, pp. 511-522, 2004.

[73]

A. Shipsha, S. Hallström and D. Zenkert, "Failure mechanisms and modelling of impact damage in sandwich beams - A 2D approach : Part I - Experimental investigation," Journal of Sandwich Structures and Materials, vol. 5, no. 1, pp. 7-31, 2003.

[74]

A. Shipsha, S. Hallström and D. Zenkert, "Failure mechanisms and modelling of impact damage in sandwich beams - A 2D approach : Part II - Analysis and modelling," Journal of Sandwich Structures and Materials, vol. 5, no. 1, pp. 33-51, 2003.

[75]

A. Shipsha and D. Zenkert, "Fatigue behavior of foam core sandwich beams with sub-interface impact damage," Journal of Sandwich Structures and Materials, vol. 5, no. 2, pp. 147-160, 2003.

Konferensbidrag

[76]

D. Carlstedt et al., "Conceptual design framework for laminated structural battery composites," in ECCM 2018 - 18th European Conference on Composite Materials, 2020.

[77]

D. Zenkert, G. Lindbergh and M. Johansson, "Carbon fibre composites as batteries, sensors, actuators and for energy harvesting," in ICCM International Conferences on Composite Materials, 2019.

[78]

L. M. Schneider et al., "Feasible manufacturing technique and mechanical properties of structural battery electrodes," in ICCM International Conferences on Composite Materials, 2019.

[79]

T. B. C. Braz et al., "Thick ply versus thin ply composite laminate stiffened panel buckling and post-buckling behavior," in ICCM International Conferences on Composite Materials, 2017.

[80]

P. Mårtensson, D. Zenkert and M. Åkermo, "The effects of cost and weight efficient structural design for manufacturing of composite automotive body structures," in 20th International Conference on Composite Materials Copenhagen, 19-24th July 2015, 2015.

[81]

P. Mårtensson, D. Zenkert and M. Åkermo, "INTEGRAL OR DIFFERENTIAL DESIGN FOR A COST EFFECTIVE COMPOSITE AUTOMOTIVE BODY STRUCTURE," in 16th European Conference on Composite Materials, ECCM 2014, 2014.

[82]

E. Jacques et al., "Performance of lithium-intercalated carbon fibres for structural electrode applications," in ICCM International Conferences on Composite Materials, 2013, pp. 6852-6859.

[83]

E. Jacques et al., "Effect of lithium-ion intercalation on the tensile properties of carbon fibres for energy storage composites," in ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials, 2012.

[84]

M. Hellqvist Kjell et al., "PAN-based carbon fibers for structural lithium-ion batteries," in ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials, 2012.

[85]

S. Sisoida et al., "Fatigue of composites with in-situ full-field strain measurements," in International Conference on Composite Materials 18, Korea, 2011.

[86]

D. Zenkert, S. Kazemahvazi and M. Burman, "Fatigue of sandwich beams under localised loads," in ICCM International Conferences on Composite Materials, 2011.

[87]

S. Sisodia et al., "Fatigue testing of composites with in-situ full-field strain measurement," in ICCM International Conferences on Composite Materials, 2011.

[88]

E. Jacques et al., "Impact of mechanical loading on the electrochemical behaviour of carbon fibers for use in energy storage composite materials," in ICCM18 International Conferences on Composite Materials 18, 2011.

[89]

S. Kazemahvazi, J. Kiele and D. Zenkert, "Strength of GRP-Laminates with Multiple Fragment Damages," in ICCM-17 17th International Conference on Composite Materials, 2009.

[90]

S. Kazemahvazi, J. Kiele and D. Zenkert, "Strength of GRP-laminates with multiple fragment damages," in Proceedings of the ICCM International Conferences on Composite Materials : ICCM-17, 2009.

[91]

M. Kaufmann, D. Zenkert and P. Wennhage, "Integrated cost/weight optimization of composite skin/stringer elements," in Proceedings of the 16th International Conference on Composite Materials, 2007, pp. 325-334.

[92]

D. Zenkert and M. Burman, "Tension, compression and shear fatigue of a closed cell foam," in 16th International Conference on Composite Materials, ICCM-16, 2007.

[93]

C. Stamblewski, B. V. Sankar and D. Zenkert, "Three-dimensional quadratic failure criteria for thick composites using the Direct Micromechanics Method," in American Society for Composites - 22nd Technical Conference of the American Society for Composites 2007 - Composites : Enabling a New Era in Civil Aviation, 2007, pp. 612-631.

[94]

D. Zenkert, A. Shipsha and M. Burman, "Fatigue of closed cell foams," in Sandwich Structures7 : Advancing with Sandwich Structures and Materials, 2005, pp. 171-181.

[95]

B. Hayman and D. Zenkert, "The Influence of Defects and Damage on the Strength of FRPSandwich Panels for Naval Ships," in 9th Int. Symp. on Practical Design of Ships and Other Floating Structures (PRADS 2004), 2004, pp. 719-726.

Kapitel i böcker

[96]

D. Zenkert, "Damage Tolerance of Naval Sandwich Panels," in Major Accomplishments in Composite Materials and Sandwich Structures : An Anthology of ONR Sponsored Research, I.M. Daniel, E.E. Gdoutos, Y.D.S. Rajapakse Ed., : Springer Publishing Company, 2009, pp. 279-303.

Icke refereegranskade

Konferensbidrag

[97]

D. Zenkert, G. Lindbergh and M. Johansson, "Carbon fibre composites as batteries, sensors, actuators and energy harvesting," in International Conference on Composite Materials ICCM22, 2019.

[98]

W. Johannisson et al., "Modelling and design of structural batteries with life cycle assessment," in 22nd INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS (ICCM22), 2019.

[99]

K. Bouton et al., "Structural Positive Electrodes for Multifunctional Composite Materials.," in Proceedings of the 2019 International Conference on Composite Materials, 2019.

[100]

W. Johannisson et al., "Analysis of Carbon Fiber Composite Electrode," in Proceedings of the 20th International Conference on Composite Materials Copenhagen, 19 - 24th July 2015, 2015.

[101]

D. Zenkert et al., "Multifunctional Composite Materials using Lithium Ion Functionalization," in International Conference on Composite Materials 20, ICCM-20, Copenhagen, Denmark, 2015, 2015.

[102]

C. Schneider et al., "HIGH STRAIN RATE COMPRESSIVE BEHAVIOUR OF SELF REINFORCED- POLY(ETHYLENE TEREPHTALATE) COMPOSITE CORRUGATED CORES," in THE 19TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, July 28 -August 2, Montréal, Canada, 2013, 2013, pp. 6027-6037.

[103]

E. Jacques et al., "PERFORMANCE OF LITHIUM-INTERCALATED CARBONFIBRES FOR STRUCTURAL ELECTRODE APPLICATIONS," in ICCM19, 2013, pp. 1-8.

[104]

S. Kazemahvazi, M. Nilsson and D. Zenkert, "Residual Strength of Full Scale GRP Laminates with Randomly Distributed Fragment Damages," in International Conference on Composite Materials 19, 2013.

[105]

D. Zenkert, S. Kazemahvazi and M. Burman, "Fatigue of foam core sandwich beams under localized loads," in International Conference on Composite Materials 18, 2011.

[106]

J. Eric et al., "Impact of the mechanical loading on the electrochemical capacity of carbon fibres for use in energy storage composite materials," in 18TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2011.

[107]

D. Zenkert, M. Kaufmann and M. Åkermo, "Optimisation of Composite Stuctures : Design for Cost," in International Conference for Composites 21st Century : Current and Future Trends, 2011.

[108]

S. Kazemahvazi and D. Zenkert, "Strength of multi-axial laminates with multiple randomly distributed holes," in International Conference on Composite Materials 18, 2011.

[109]

S. Kazemahvazi et al., "Impact Properties of Corrugated Composite Sandwich Cores," in International Conference on Sandwich Structures ,ICSS9, 2010.

[110]

M. Burman, A. Rosén and D. Zenkert, "Spectrum Slam Fatigue Loading of Sandwich Materials for Marine Structures," in Ninth International Conference on Sandwich Structures (ICSS-9) in Pasadena, California, 14-16 June 2010, 2010.

[111]

D. Zenkert and M. Burman, "Failure Mode Shifts in Fatigue of Sandwich Beams," in International Conference on Composite Materials 17, 2009.

[112]

K. Zimmermann, M. Siemetzki and D. Zenkert, "Analysis and Manufacturing of Ultra Thick Laminates for Future Aircraft Applications," in ECCM-13, 2008, 2008.

[113]

M. Kaufmann, T. Czumanski and D. Zenkert, "Manufacturing Process Adaptation for the Cost/Weight Optimization of Aircraft Structures," in European Conference on Composite Materials 13, Stockholm, 2008.

[114]

L. Fagerberg and D. Zenkert, "Reasonable Knock-Down Factors for Sandwich Face Wrinkling," in European Conference on Composite Materials 13, 2008.

[115]

S. Kazemahvazi and D. Zenkert, "The Compressive and Shear Responde of Corrugated Hierarchical and Foam Filled Sandwich Structures," in 8th International Conference on Sandwich Structures ICSS 8, 2008.

[116]

S. Kazemahvazi, D. Zenkert and M. Burman, "NOTCH AND STRAIN RATE SENSITIVITY OF NON CRIMP FABRIC COMPOSITES," in ICCM16, 2007.

[117]

D. Zenkert, S. Hallström and P. Wennhage, "Higher education in sandwich structures," in 6th International Conference on Sandwich Construction, 2003.