Skip to main content
To KTH's start page

Publications

Publications by the division of Heat and Power

[1]
A. Kurniawan et al., "Experimental investigation of high-temperature latent heat storage packed bed using alloy-based phase change materials," Applied Thermal Engineering, vol. 259, 2025.
[2]
Y. Ye et al., "Study on the interface ionic conductivity of perovskite-perovskite heterostructure composite : Strongly enhanced or not?," Ceramics International, vol. 51, no. 4, pp. 5299-5308, 2025.
[3]
B. Zhu et al., "A damage characterization method for thin-walled butt welded joints with slant fracture in 6005A-T6 aluminum alloy," Engineering Fracture Mechanics, vol. 315, 2025.
[4]
L. Smajila et al., "Comparative analysis of techno-economic and techno-environmental approach to optimal sizing and dispatch of hybrid solar–battery systems," Energy Conversion and Management : X, vol. 25, 2025.
[5]
R. Xu et al., "Hybrid high-temperature wear mechanisms of additive manufactured Ti-6Al-4V alloy," Tribology International, vol. 205, 2025.
[6]
S. Hammer et al., "Acoustic Modes in an open Box Cavity with variable Depth using two distinct Wind Tunnels," Journal of Turbomachinery, vol. 147, no. 8, 2025.
[7]
X. Chen et al., "Automation and synchronisation on electro-hydraulic lifting system of tunnel boring machine segment assembly," International Journal of Hydromechatronics, vol. 8, no. 1, pp. 94-120, 2025.
[8]
H. Mårtensson, "Fan Performance and Aerodynamic Forces with Boundary Layer Ingestion," Doctoral thesis stockholm,sweden : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2025:10, 2025.
[9]
T. Ruan, W. Wang and B. Laumert, "Potential of Wall-Mounted Solar PV Panel in high-latitude areas-A case study in Swedish contexts," in Energy Proceedings, 2025.
[10]
C. A. Tavera Guerrero et al., "Aeroelastic Response in an Oscillating Transonic Compressor Cascade : An Experimental and Numerical Approach," International Journal of Turbomachinery, Propulsion and Power, vol. 10, no. 2, 2025.
[11]
T. Ruan, "Decentralized PV systems in Sweden : Techno-economic analysis with a case study of Stockholm," Doctoral thesis Stockholm, Sweden : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2025:16, 2025.
[12]
P. Costa Nascimento et al., "Mitigation strategies for electric vehicle impact on power systems : A comprehensive probabilistic method," Electric power systems research, vol. 247, 2025.
[13]
Y. Ma, G. Xie and W. Wang, "Influences of wall materials on flow and thermal performance of S-CO2 at high pressure and heat flux," International journal of thermal sciences, vol. 214, 2025.
[14]
C. A. Tavera Guerrero, "Leading Edge Erosion Influence on the Aeroelastic Response in a Transonic Compressor Cascade : A Numerical and Experimental Approach," Doctoral thesis Stockholm : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2025:17, 2025.
[15]
S. Trevisan et al., "Techno-Economic Comparative Assessment of High Temperature Heat Pump Architectures for Industrial Pumped Thermal Energy Storage," Journal of engineering for gas turbines and power, vol. 147, no. 6, 2025.
[16]
X. Lyu et al., "A bibliometric evaluation and visualization of global solar power generation research : productivity, contributors and hot topics," Environmental Science and Pollution Research, vol. 31, no. 5, pp. 8274-8290, 2024.
[17]
S. Trevisan and R. Guédez, "Design optimization of an innovative layered radial-flow high-temperature packed bed thermal energy storage," Journal of Energy Storage, vol. 83, 2024.
[18]
S. Rasool et al., "Insight of proton transport phenomena in semiconductor ionic materials," Journal of Power Sources, vol. 598, 2024.
[19]
M. Khalid et al., "Impact of public and residential smart EV charging on distribution power grid equipped with storage," Sustainable cities and society, vol. 104, 2024.
[20]
W. Sun et al., "Na0.6Co3O4- La/Pr co-Doped Ceria as Semiconductor-Ionic Heterostructure Material for Fuel Cell Application," Journal of the Electrochemical Society, vol. 171, no. 4, 2024.
[21]
L. A. Choque Campero, "Brayton-Stirling-Membrane Distillation systems for clean energy and water access in rural Bolivia," Doctoral thesis Stockholm : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2024:6, 2024.
[22]
L. Shan, A. R. Martin and J. N. Chiu, "Techno-economic analysis of latent heat thermal energy storage integrated heat pump for indoor heating," Energy, vol. 298, 2024.
[23]
A. Butean et al., "A digital twin concept for optimizing the use of high-temperature heat pumps to reduce waste in industrial renewable energy systems," in International Conference on Industry Sciences and Computer Science Innovation, iSCSi 2023, 2024, pp. 123-128.
[24]
N. Kilian et al., "Numerical investigation of forced response in a transonic compressor stage-highlighting challenges using experimental validation," International Journal of Turbomachinery, Propulsion and Power, vol. 9, no. 2, 2024.
[25]
N. Yakah et al., "Techno-Economic Assessment of Municipal Solid Waste (MSW) Incineration in Ghana," Processes, vol. 12, no. 7, 2024.
[26]
L. A. Choque Campero et al., "Decentralized biomass-based Brayton-Stirling power cycle with an air gap membrane distiller for supplying electricity, heat and clean water in rural areas," Applied Thermal Engineering, vol. 254, 2024.
[27]
P. Koschwitz et al., "Optimal Operation of a Novel Small-Scale Power-to-Ammonia Cycle under Possible Disturbances and Fluctuations in Electricity Prices," Energies, vol. 17, no. 16, 2024.
[28]
L. Shan et al., "High Temperature Thermal Energy Storage with Phase Change Materials in Concentrated Solar Power System : A Case Study," in Proceedings of the 16th IEA ES TCP International Conference on Energy Storage (ENERSTOCK 2024), 2024, pp. 251-255.
[29]
J. Thiyagarajan et al., "Matching of an overhung volute to a centrifugal compressor at varied operating conditions," in Proceedings of ASME Turbo Expo 2024: Turbomachinery Technical Conference and Exposition, GT 2024, 2024.
[30]
T. Ruan et al., "Pv-load matching based on combination of different consumers : A case study in Swedish contexts," Solar Energy, vol. 281, 2024.
[31]
S. Guccione and R. Guédez, "Optimum coupling of thermal energy storage and power cycles for carnot batteries," in Proceedings of the 7th International Seminar on ORC Power System, 2024, pp. 751-760.
[32]
S. Guccione et al., "Preliminary Results of the EU SolarSCO2OL Demonstration Project: Enabling the Integration of Supercritical CO2 Power Blocks into Hybrid CSP-PV Plants," in The 8th International Supercritical CO2 Power Cycles Symposium, February 26 – 29, 2024, Hilton Palacio del Rio, 200 South Alamo Street, San Antonio, Texas, 2024.
[33]
M. Söderqvist et al., "Internationalisation Of Doctoral Education Within The European University Alliance : A Multi-partner Co-tutelle Model," in Internationalization of the Doctoral Experience: Models, Opportunities and Outcomes, Elspeth Jones, Björn Norlin, Carina Rönnqvist, Kirk P. H. Sullivan Ed., : Taylor & Francis, 2024.
[34]
S. Trevisan et al., "Techno-economic comparative assessment of high temperature heat pump architectures for industrial pumped thermal energy storage," in Proceedings of asme ASME Turbo Expo 2024 : Turbomachinery technical conference and exposition, GT2024, vol 6, 2024.
[35]
S. Guccione and R. Guédez, "Techno-Economic Analysis of Power-to-Heat-to-Power Plants : Mapping Optimal Combinations of Thermal Energy Storage and Power Cycles," Energy, vol. 312, 2024.
[36]
K. Ananthakrishnan, N. Glodic and M. Gutierrez, "Influence of Circumferential Splitter Vane on Aerodynamics of Super Aggressive Intermediate Compressor Duct," in ISABE 2024, 2024.
[37]
A. M. Pantaleo et al., "Innovation trends on high-temperature thermal energy storage to defossilize energy systems," Journal of Energy Storage, vol. 103, 2024.
[38]
L. A. Choque Campero et al., "Biomass-based Brayton-Stirling-AGMD polygeneration for small-scale applications in rural areas," Energy, vol. 304, 2024.
[39]
N. Glodic et al., "Aeroelastic tailoring of fan blades for an electric fan thruster," in ISABE 2024 @ Toulouse, FRANCE · 26th Conference of the International Society for Air Breathing Engines 22-27 Sep 2024, 2024.
[40]
C. P. Patel et al., "Experimental study of a latent heat thermal energy storage system using erythritol for medium temperature applications," Case Studies in Thermal Engineering, vol. 53, 2024.
[41]
H. Ebadi et al., "OPTICAL ANALYSIS AND OPTIMIZATION OF A NEW RECEIVER FOR SOLAR PARABOLIC TROUGH COLLECTORS (DETECTIVE)," in PROCEEDINGS OF ASME 2024 18TH INTERNATIONAL CONFERENCE ON ENERGY SUSTAINABILITY, ES2024, 2024.
[42]
H. Dong, "Phase change material integrated underground thermal energy storage in heating and cooling applications : A review," in Proceedings of the 16th IEA ES TCP International Conference on Energy Storage ENERSTOCK 2024, 2024.
[43]
H. Dong, "Life Cycle Assessment of Ground Source Heat Pump Systems Integrated with Latent Heat Thermal Energy Storage," in 21-23 October 2024, SETAC Europe 26th LCA Symposium, Gothenburg, Sweden, 2024.
[44]
S. Hammer et al., "Acoustic Modes in an Open Box Cavity With Variable Depth Using Two Distinct Wind Tunnels," in ASME Turbo Expo, Turbomachinery Technical Conference & Exposition, June 24–28, 2024, London, England, United Kingdom, 2024.
[45]
M. Billson et al., "Acoustic Cavity Resonances Driven by Shear Layer Instability," in 30th AIAA/CEAS Aeroacoustics Conference, 4 June - 7 June 2024, Rome, Italy, 2024.
[46]
Y. Garcia Lovella et al., "Reynolds-average Navier-Stokes turbulence models assessment: A case study of CH4/H2/N2-air reacting je," Heliyon, vol. 10, no. 5, 2024.
[47]
J. Thiyagarajan et al., "Performance Analysis of Centrifugal Compressor Stage using Detailed Component Level Measurements," International Journal of Gas Turbine, Propulsion and Power Systems, vol. 15, no. 3, pp. 58-66, 2024.
[48]
H. Yang et al., "Carbon-negative valorization of biomass waste into affordable green hydrogen and battery anodes," International journal of hydrogen energy, vol. 49, pp. 459-471, 2024.
[49]
K. Ananthakrishnan et al., "A numerical investigation of active flow control strategies for the suppression of aerodynamic flow separations in a very aggressive intermediate compressor duct," in Proceedings of ASME Turbo Expo 2024 : Turbomachinery technical conference and exposition, GT2024, vol 12c, 2024.
[50]
H. Mårtensson and F. Rasimarzabadi, "Effects of distortion on a BLI fan," Aeronautical Journal, vol. 128, no. 1325, pp. 1362-1378, 2024.
Full list in the KTH publications portal