2013
[1]
[2]
A. Svensson et al.,
"3D-shapeable thermoplastic paper materials,"
Nordic Pulp & Paper Research Journal, vol. 28, no. 4, pp. 602-610, 2013.
[3]
P. Olin et al.,
"Water Drop Friction on Superhydrophobic Surfaces,"
Langmuir, vol. 29, no. 29, pp. 9079-9089, 2013.
[4]
G. Zheng et al.,
"Nanostructured paper for flexible energy and electronic devices,"
MRS bulletin, vol. 38, no. 4, pp. 320-325, 2013.
[5]
P. A. Larsson, L. Berglund and L. Wågberg,
"Ductile cellulose nanocomposite films fabricated from nanofibrillated cellulose after partial conversion to dialcohol cellulose,"
in 245th ACS National Meeting and Exposition April 7-11, 2013, New Orleans, Louisiana, 2013.
[6]
A. Fall,
"Colloidal interactions and orientation of nanocellulose particles,"
Doctoral thesis Stockholm : KTH Royal Institute of Technology, Trita-CHE-Report, 2013:47, 2013.
[7]
L. Hu et al.,
"Transparent and conductive paper from nanocellulose fibers,"
Energy & Environmental Science, vol. 6, no. 2, pp. 513-518, 2013.
[8]
N. Tchang Cervin et al.,
"Lightweight and Strong Cellulose Materials Made from Aqueous Foams Stabilized by Nanofibrillated Cellulose,"
Biomacromolecules, vol. 14, no. 2, pp. 503-511, 2013.
[9]
P. T. Larsson, A. Svensson and L. Wågberg,
"A new, robust method for measuring average fibre wall pore sizes in cellulose I rich plant fibre walls,"
Cellulose, vol. 20, no. 2, pp. 623-631, 2013.
[10]
L. Ejenstam et al.,
"The effect of superhydrophobic wetting state on corrosion protection - The AKD example,"
Journal of Colloid and Interface Science, vol. 412, pp. 56-64, 2013.
[11]
C. Bruce et al.,
"Physical Tuning of Cellulose-Polymer Interactions Utilizing Cationic Block Copolymers Based on PCL and Quaternized PDMAEMA,"
in 2013 TAPPI International Conference on Nanotechnology for Renewable Materials; Stockholm, Sweden, 24-27 June, 2013, 2013.
[12]
N. Sanandaji et al.,
"Unusual crystals of poly(epsilon-caprolactone) by unusual crystallisation : The effects of rapid cooling and fast solvent loss on the morphology, crystal structure and melting,"
Polymer, vol. 54, no. 5, pp. 1497-1503, 2013.
[13]
C. Carrick et al.,
"Hollow cellulose capsules from CO2 saturated cellulose solutions - Their preparation and characterization,"
RSC Advances, vol. 3, no. 7, pp. 2462-2469, 2013.
[14]
A. Svensson et al.,
"Preparation of dry ultra-porous cellulosic fibres : Characterization and possible initial uses,"
Carbohydrate Polymers, vol. 92, no. 1, pp. 775-783, 2013.
[15]
S. Leijonmarck et al.,
"Single-paper flexible Li-ion battery cells through a paper-making process based on nano-fibrillated cellulose,"
Journal of Materials Chemistry, vol. 1, no. 15, pp. 4671-4677, 2013.
[16]
S. Leijonmarck et al.,
"Flexible nano-paper-based positive electrodes for Li-ion batteries- Preparation process and properties,"
Nano Energy, vol. 2, no. 5, pp. 794-800, 2013.
[17]
E. Larsson et al.,
"Modification of nanofibrillated cellulose (NFC) with thermo-responsive block copolymers,"
Abstracts of Papers of the American Chemical Society, vol. 245, 2013.
[18]
R. W. N. Nugroho et al.,
"Force Interactions of Nonagglomerating Polylactide Particles Obtained through Covalent Surface Grafting with Hydrophilic Polymers,"
Langmuir, vol. 29, no. 26, pp. 8873-8881, 2013.
[19]
M. Hamedi et al.,
"Nanocellulose Aerogels Functionalized by Rapid Layer-by-Layer Assembly for High Charge Storage and Beyond,"
Angewandte Chemie International Edition, vol. 52, no. 46, pp. 12038-12042, 2013.
[20]
A. B. Fall et al.,
"A physical cross-linking process of cellulose nanofibril gels with shear-controlled fibril orientation,"
Soft Matter, vol. 9, no. 6, pp. 1852-1863, 2013.
[21]
A. B. Fall, L. Wågberg and A. Burman,
"Liberation of nanofibrils from different types of wood,"
Abstracts of Papers of the American Chemical Society, vol. 245, 2013.
[22]
A. B. Fall, L. Wågberg and E. Karabulut,
"Preparation of ultrathin cellulose nanofibril-based hollow capsules using layer-by-layer deposition,"
Abstracts of Papers of the American Chemical Society, vol. 245, 2013.
[23]
R. Hollertz et al.,
"Dielectric properties of lignin and glucomannan as determined by spectroscopic ellipsometry and Lifshitz estimates of non-retarded Hamaker constants,"
Cellulose, vol. 20, no. 4, pp. 1639-1648, 2013.
[24]
L. Andersson et al.,
"Evaluating pore space in macroporous ceramics with water-based porosimetry,"
Journal of The American Ceramic Society, vol. 96, no. 6, pp. 1916-1922, 2013.
[25]
J. Joby Kochumalayil et al.,
"Bioinspired and highly oriented clay nanocomposites with a xyloglucan biopolymer matrix : Extending the range of mechanical and barrier properties,"
Biomacromolecules, vol. 14, no. 1, pp. 84-91, 2013.
[26]
F. Xie et al.,
"Polyelectrolyte Adsorption on Solid Surfaces : Theoretical Predictions and Experimental Measurements,"
Langmuir, vol. 29, no. 40, pp. 12421-12431, 2013.
[27]
L. Ovaskainen et al.,
"Towards superhydrophobic coatings made by non-fluorinated polymers sprayed from a supercritical solution,"
Journal of Supercritical Fluids, vol. 77, pp. 134-141, 2013.
[28]
L. Ovaskainen et al.,
"Preparation of polymeric surface coatings by using supercritical carbon dioxide,"
Abstracts of Papers of the American Chemical Society, vol. 245, 2013.
[29]
J. Illergård, L. Wågberg and M. Ek,
"Contact-active antibacterial polyelectrolyte multilayers : The influence of substrate,"
Abstracts of Papers of the American Chemical Society, vol. 245, pp. 515-PMSE, 2013.
[30]
E. Karabulut, A. Marais and L. Wågberg,
"Wet-resilient, low density aerogels from nanofibrillated cellulose : Their properties and use as templates for layer-by-layer modification,"
Abstracts of Papers of the American Chemical Society, vol. 245, pp. 73-PMSE, 2013.
[31]
P. A. Larsson, J. J. Kochumalayil and L. Wågberg,
"Oxygen and water vapour barrier films with low moisture sensitivity fabricated from self-crosslinking fibrillated cellulose,"
in Advances in pulp and paper research, Cambridge 2013 : transactions of the 15th Fundamental Research Symposium held in Cambridge: September 2013, 2013, pp. 851-866.