Articles

2019

[1]
B. Endrodi et al., "In situ formed vanadium-oxide cathode coatings for selective hydrogen production," Applied Catalysis B : Environmental, vol. 244, pp. 233-239, 2019.
[2]
A. Bessman et al., "Aging effects of AC harmonics on lithium-ion cells," Journal of Energy Storage, vol. 21, pp. 741-749, 2019.
[4]
B. Endrodi et al., "Suppressed oxygen evolution during chlorateformation from hypochlorite in the presenceof chromium(VI)," Journal of chemical technology and biotechnology (1986), vol. 94, no. 5, pp. 1520-1527, 2019.
[7]
[8]
S. Mesfun et al., "Integration of an electrolysis unit for producer gas conditioning in a bio-synthetic natural gas plant," Journal of energy resources technology, vol. 141, no. 1, 2019.
[9]
B. Eriksson et al., "Quantifying water transport in anion exchange membrane fuel cells," International journal of hydrogen energy, vol. 44, no. 10, pp. 4930-4939, 2019.
[11]
[12]
H. Kim et al., "Lithium Ion Battery Separators Based On Carboxylated Cellulose Nanofibers From Wood," ACS APPLIED ENERGY MATERIALS, vol. 2, pp. 1241-1250, 2019.
[13]
M. Varini, P. E. Campana and G. Lindbergh, "A semi-empirical, electrochemistry-based model for Li-ion battery performance prediction over lifetime," Journal of Energy Storage, vol. 25, 2019.
[14]
J. Y. Ko et al., "Porous Electrode Model with Particle Stress Effects for Li(Ni1/3Co1/3Mn1/3)O2 Electrode," Journal of the Electrochemical Society, 2019.
[15]
B. Endrodi et al., "Selective Hydrogen Evolution on Manganese Oxide Coated Electrodes : New Cathodes for Sodium Chlorate Production," ACS Sustainable Chemistry & Engineering, vol. 7, no. 14, pp. 12170-12178, 2019.
[17]
K. Peuvot et al., "Lignin Based Electrospun Carbon Fiber Anode for Sodium Ion Batteries," Journal of the Electrochemical Society, vol. 166, no. 10, pp. A1984-A1990, 2019.
[18]
[19]
K. Peuvot et al., "Lignin based electrospun carbon fiber anode for sodium ion batteries," Journal of the Electrochemical Society, vol. 166, no. 10, pp. A1984-A1990, 2019.
[20]
W. Johannisson and D. Zenkert, "Model of a structural battery and its potential for system level mass savings," Multifunctional Materials, 2019.

2018

[1]
S. Mikkonen, H. Ekström and W. Thormann, "High-resolution dynamic computer simulation of electrophoresis using a multiphysics software platform," Journal of Chromatography A, vol. 1532, pp. 216-222, 2018.
[2]
[3]
J. Lindberg et al., "Li Salt Anion Effect on O-2 Solubility in an Li-O-2 Battery," The Journal of Physical Chemistry C, vol. 122, no. 4, pp. 1913-1920, 2018.
[4]
A. Nowak et al., "Lignin-based carbon fibers for renewable and multifunctional lithium-ion battery electrodes," Holzforschung, vol. 72, no. 2, pp. 81-90, 2018.
[5]
A. Cornell, M. Rodrigo and K. Bouzek, "Special Issue : 11th European Symposium in Electrochemical Engineering (ESEE 11) Foreword," Journal of Applied Electrochemistry, vol. 48, no. 6, pp. 559-560, 2018.
[6]
A. S. Mussa et al., "Effects of external pressure on the performance and ageing of single-layer lithium-ion pouch cells," Journal of Power Sources, vol. 385, pp. 18-26, 2018.
[7]
M. Abbasi, J. Backstrom and A. M. Cornell, "Fabrication of Spin-Coated Ti/TiHx/Ni-Sb-SnO2 Electrode : Stability and Electrocatalytic Activity," Journal of the Electrochemical Society, vol. 165, no. 9, pp. H568-H574, 2018.
[8]
H. Ekström, B. Fridholm and G. Lindbergh, "Comparison of lumped diffusion models for voltage prediction of a lithium-ion battery cell during dynamic loads," Journal of Power Sources, vol. 402, pp. 296-300, 2018.
[9]
B. Endrődi et al., "Towards sustainable chlorate production : The effect of permanganate addition on current efficiency," Journal of Cleaner Production, vol. 182, pp. 529-537, 2018.
[10]
[12]
Y. A. Gomez et al., "Ammonia contamination of a proton exchange membrane fuel cell," Journal of the Electrochemical Society, vol. 165, no. 3, pp. F189-F197, 2018.
[13]
A. Bessman et al., "Challenging Sinusoidal Ripple-Current Charging of Lithium-Ion Batteries," IEEE transactions on industrial electronics (1982. Print), vol. 65, no. 6, pp. 4750-4757, 2018.
[14]
M. M. Pereira da Silva Neves and D. Martín-Yerga, "Advanced Nanoscale Approaches to Single-(Bio)entity Sensing and Imaging," Biosensors, vol. 8, no. 4, 2018.
[15]
J. Hagberg et al., "Lithium iron phosphate coated carbon fiber electrodes for structural lithium ion batteries," Composites Science And Technology, vol. 162, pp. 235-243, 2018.
[16]
N. Lindahl et al., "Fuel Cell Measurements with Cathode Catalysts of Sputtered Pt3Y Thin Films," ChemSusChem, vol. 11, no. 9, pp. 1438-1445, 2018.
[18]
D. Martín-Yerga et al., "Towards single-molecule : In situ electrochemical SERS detection with disposable substrates," Chemical Communications, vol. 54, no. 45, pp. 5748-5751, 2018.
[20]
R. Harnden et al., "Multifunctional Performance of Sodiated Carbon Fibers," Journal of the Electrochemical Society, vol. 165, no. 13, pp. B616-B622, 2018.
[21]
P. Kanninen and T. Kallio, "Activation of commercial Pt/C catalyst toward glucose electro-oxidation by irreversible Bi adsorption," Journal of Energy Challenges and Mechanics, vol. 27, no. 5, pp. 1446-1452, 2018.

2017

[1]
[4]
M. Fatima et al., "A review on biocatalytic decomposition of azo dyes and electrons recovery," Journal of Molecular Liquids, vol. 246, pp. 275-281, 2017.
[5]
J. Lindberg et al., "Benchmarking of electrolyte mass transport in next generation lithium batteries," Journal of Electrochemical Science and Engineering, vol. 7, no. 4, pp. 213-221, 2017.
[6]
A. S. Mussa et al., "Fast-charging to a partial state of charge in lithium-ion batteries : A comparative ageing study," Journal of Energy Storage, vol. 13, pp. 325-333, 2017.
[7]
S. Sandin et al., "Deposition efficiency in the preparation of ozone-producing nickel and antimony doped tin oxide anodes," Journal of Electrochemical Science and Engineering, vol. 7, no. 1, pp. 51-64, 2017.
[8]
H. Rashtchi et al., "Performance of a PEM fuel cell using electroplated Ni–Mo and Ni–Mo–P stainless steel bipolar plates," Journal of the Electrochemical Society, vol. 164, no. 13, pp. F1427-F1436, 2017.
[9]
J. Lindberg et al., "The effect of O2 concentration on the reaction mechanism in Li-O2 batteries," Journal of Electroanalytical Chemistry, vol. 797, pp. 1-7, 2017.
[11]
L. Hu et al., "A Model for Analysis of the Porous Nickel Electrode Polarization in the Molten Carbonate Electrolysis Cell," Journal of the Electrochemical Society, vol. 164, no. 8, pp. H5197-H5201, 2017.

2016

[1]
H. Lu et al., "Flexible Paper Electrodes for Li-Ion Batteries Using Low Amount of TEMPO-Oxidized Cellulose Nanofibrils as Binder," ACS Applied Materials and Interfaces, vol. 8, no. 28, pp. 18097-18106, 2016.
[3]
L. Hu, G. Lindbergh and C. Lagergren, "Performance and Durability of the Molten Carbonate Electrolysis Cell and the Reversible Molten Carbonate Fuel Cell," The Journal of Physical Chemistry C, vol. 120, no. 25, pp. 13427-13433, 2016.
[4]
R. K. B. Karlsson, A. Cornell and L. G. M. Pettersson, "Structural Changes in RuO2 during Electrochemical Hydrogen Evolution," The Journal of Physical Chemistry C, vol. 120, no. 13, pp. 7094-7102, 2016.
[5]
H. Lu et al., "Lignin as a Binder Material for Eco-Friendly Li-Ion Batteries," Materials, vol. 9, no. 3, 2016.
[6]
R. K. B. Karlsson and A. Cornell, "Selectivity between Oxygen and Chlorine Evolution in the Chlor-Alkali and Chlorate Processes," Chemical Reviews, vol. 116, no. 5, pp. 2982-3028, 2016.
[7]
H. Lundgren et al., "Thermal Management of Large-Format Prismatic Lithium-Ion Battery in PHEV Application," Journal of the Electrochemical Society, vol. 163, no. 2, pp. A309-A317, 2016.
[8]
[9]
J. Hagberg, S. Leijonmarck and G. Lindbergh, "High Precision Coulometry of Commercial PAN-Based Carbon Fibers as Electrodes in Structural Batteries," Journal of the Electrochemical Society, vol. 163, no. 8, pp. A1790-A1797, 2016.
[11]
L. Hu, G. Lindbergh and C. Lagergren, "Operating the nickel electrode with hydrogen-lean gases in the molten carbonate electrolysis cell (MCEC)," International journal of hydrogen energy, vol. 41, no. 41, pp. 18692-18698, 2016.

2015

[1]
L. Hu, G. Lindbergh and C. Lagergren, "Electrode kinetics of the NiO porous electrode for oxygen production in the molten carbonate electrolysis cell (MCEC)," Faraday discussions (Online), vol. 182, pp. 493-509, 2015.
[2]
R. K. B. Karlsson, A. Cornell and L. G. M. Pettersson, "The electrocatalytic properties of doped TiO2," Electrochimica Acta, vol. 180, pp. 514-527, 2015.
[3]
L. Hu, G. Lindbergh and C. Lagergren, "Electrode Kinetics of the Ni Porous Electrode for Hydrogen Production in a Molten Carbonate Electrolysis Cell (MCEC)," Journal of the Electrochemical Society, vol. 162, no. 9, pp. F1020-F1028, 2015.
[4]
V. Klass, M. Behm and G. Lindbergh, "Capturing lithium-ion battery dynamics with support vector machine-based battery model," Journal of Power Sources, vol. 298, pp. 92-101, 2015.
[5]
H. Ekström and G. Lindbergh, "A model for predicting capacity fade due to SEI formation in a commercial graphite/LiFePO4 cell," Journal of the Electrochemical Society, vol. 162, no. 6, pp. A1003-A1007, 2015.
[6]
M. Esmaily et al., "The influence of SO2 on the corrosion of Mg and Mg-Al alloys," Journal of the Electrochemical Society, vol. 162, no. 6, pp. C260-C269, 2015.
[7]
E. Jacques et al., "Piezo-Electrochemical Energy Harvesting with Lithium-Intercalating Carbon Fibers," ACS Applied Materials and Interfaces, vol. 7, no. 25, pp. 13898-13904, 2015.
[8]
B. Das et al., "High performance metal nitrides, MN (M = Cr, Co) nanoparticles for non-aqueous hybrid supercapacitors," Advanced Powder Technology, vol. 26, no. 3, pp. 783-788, 2015.
[9]
H. Lundgren, M. Behm and G. Lindbergh, "Electrochemical Characterization and Temperature Dependency of Mass-Transport Properties of LiPF6 in EC:DEC," Journal of the Electrochemical Society, vol. 162, no. 3, pp. A413-A420, 2015.
[10]
H. K. Gatty et al., "An amperometric nitric oxide sensor with fast response and ppb-level concentration detection relevant to asthma monitoring," Sensors and actuators. B, Chemical, vol. 209, pp. 639-644, 2015.
[11]
M. Klett et al., "Uneven Film Formation across Depth of Porous Graphite Electrodes in Cycled Commercial Li-Ion Batteries," The Journal of Physical Chemistry C, vol. 119, no. 1, pp. 90-100, 2015.
[12]
H. Lundgren et al., "Characterization of the Mass-Transport Phenomena in a Superconcentrated LiTFSI : Acetonitrile Electrolyte," Journal of the Electrochemical Society, vol. 162, no. 7, pp. A1334-A1340, 2015.
[13]
G. Tondi et al., "Tannin based foams modified to be semi-conductive : Synthesis and characterization," Progress in organic coatings, vol. 78, pp. 488-493, 2015.
[14]
[15]
P. Svens, M. Behm and G. Lindbergh, "Lithium-Ion Battery Cell Cycling and Usage Analysis in a Heavy-Duty Truck Field Study," Energies, vol. 8, no. 5, pp. 4513-4528, 2015.
[17]
C. M. Lousada, T. Brinck and M. Jonsson, "Application of reactivity descriptors to the catalytic decomposition of hydrogen peroxide at oxide surfaces," Computational and Theoretical Chemistry, vol. 1070, pp. 108-116, 2015.
[18]
S. Sandin, R. K. B. Karlsson and A. Cornell, "Catalyzed and uncatalyzed decomposition of hypochlorite in dilute solutions," Industrial & Engineering Chemistry Research, vol. 54, no. 15, pp. 3767-3774, 2015.
[19]
K. Dermenci et al., "Effect of cathode slurry composition on the electrochemical properties of Li-ion batteries," ECS Transactions, vol. 66, no. 9, pp. 285-293, 2015.

2014

[1]
A. Cornell, "Chlorate synthesis cells and technology," in Encyclopedia of applied electrochemistry, R.F. Savinell, K. Ota, G. Kreysa Ed., : Springer, 2014, pp. 181-187.
[3]
A. Cornell, "Chlorate cathodes and electrode design," in Encyclopedia of applied electrochemistry, R.F. Savinell,K. Ota,G. Kreysa Ed., : Springer, 2014, pp. 175-181.
[4]
H. G. S. Casalongue et al., "Operando Characterization of an Amorphous Molybdenum Sulfide Nanoparticle Catalyst during the Hydrogen Evolution Reaction," The Journal of Physical Chemistry C, vol. 118, no. 50, pp. 29252-29259, 2014.
[6]
R. K. B. Karlsson et al., "Ti atoms in Ru0.3Ti0.7O2 mixed oxides form active and selective sites for electrochemical chlorine evolution," Electrochimica Acta, vol. 146, pp. 733-740, 2014.
[9]
[11]
A. Oyarce et al., "Direct sorbitol proton exchange membrane fuel cell using moderate catalyst loadings," Electrochimica Acta, vol. 116, pp. 379-387, 2014.
[12]
M. Willgert et al., "Cellulose nanofibril reinforced composite electrolytes for lithium ion battery applications," Journal of Materials Chemistry A, vol. 2, no. 33, pp. 13556-13564, 2014.
[14]
I. Rexed, C. Lagergren and G. Lindbergh, "Effect of sulfur contaminants on MCFC performance," International journal of hydrogen energy, vol. 39, no. 23, pp. 12242-12250, 2014.
[15]
L. Hu et al., "Electrochemical performance of reversible molten carbonate fuel cells," International journal of hydrogen energy, vol. 39, no. 23, pp. 12323-12329, 2014.
[16]
P. Svens et al., "Analysis of aging of commercial composite metal oxide - Li 4Ti5O12 battery cells," Journal of Power Sources, vol. 270, pp. 131-141, 2014.
[17]
V. Klass, M. Behm and G. Lindbergh, "A support vector machine-based state-of-health estimation method for lithium-ion batteries under electric vehicle operation," Journal of Power Sources, vol. 270, pp. 262-272, 2014.
[18]
B. Ebin, S. Gürmen and G. Lindbergh, "Preparation and electrochemical properties of spinel LiFexCuyMn1.2O4 by ultrasonic spray pyrolysis," Ceramics International, vol. 40, no. 1, pp. 1019-1027, 2014.
[19]
[20]
A. Oyarce et al., "Comparing shut-down strategies for proton exchange membrane fuel cells," Journal of Power Sources, vol. 254, pp. 232-240, 2014.

2013

[1]
K. Kortsdottir, C. Dominguez Fernandez and R. Wreland Lindström, "Influence of Hydrogen and Operation Conditions on CO2 Adsorption on Pt and PtRu Catalyst in a PEMFC," ECS Electrochemistry Letters, vol. 2, no. 5, pp. F41-F43, 2013.
[2]
S. Leijonmarck et al., "Flexible nano-paper-based positive electrodes for Li-ion batteries- Preparation process and properties," Nano Energy, vol. 2, no. 5, pp. 794-800, 2013.
[3]
S. Sevencan and G. A. Ciftcioglu, "Life cycle assessment of power generation alternatives for a stand-alone mobile house," International journal of hydrogen energy, vol. 38, no. 34, pp. 14369-14379, 2013.
[4]
S. Bebelis et al., "Highlights during the development of electrochemical engineering," Chemical engineering research & design, vol. 91, no. 10, pp. 1998-2020, 2013.
[5]
S. Leijonmarck et al., "Solid polymer electrolyte-coated carbon fibres for structural and novel micro batteries," Composites Science And Technology, vol. 89, pp. 149-157, 2013.
[6]
C. Hummelgård et al., "Physical and electrochemical properties of cobalt doped (Ti,Ru)O-2 electrode coatings," Materials Science & Engineering : B. Solid-state Materials for Advanced Technology, vol. 178, no. 20, pp. 1515-1522, 2013.
[7]
S. Sevencan et al., "Fuel cell based cogeneration : Comparison of electricity production cost for Swedish conditions," International journal of hydrogen energy, vol. 38, no. 10, pp. 3858-3864, 2013.
[8]
S. Leijonmarck et al., "Single-paper flexible Li-ion battery cells through a paper-making process based on nano-fibrillated cellulose," Journal of Materials Chemistry, vol. 1, no. 15, pp. 4671-4677, 2013.
[9]
R. Wreland Lindström et al., "Performance of Phosphonated Hydrocarbon Ionomer in the Fuel Cell Cathode Catalyst Layer," Journal of the Electrochemical Society, vol. 160, no. 3, pp. F269-F277, 2013.
[10]
[11]
K. Kortsdottir, R. Wreland Lindström and G. Lindbergh, "The influence of ethene impurities in the gas feed of a PEM fuel cell," International journal of hydrogen energy, vol. 38, no. 1, pp. 497-509, 2013.
[12]
[13]
C. Hummelgard et al., "Spin coated titanium-ruthenium oxide thin films," Thin Solid Films, vol. 536, pp. 74-80, 2013.
[14]
M. Willgert et al., "New structural lithium battery electrolytes using thiol-ene chemistry," Solid State Ionics, vol. 236, pp. 22-29, 2013.
[17]
M. Hellqvist Kjell et al., "Electrochemical characterization of lithium intercalation processes of PAN-based carbon fibers in a microelectrode system," Journal of the Electrochemical Society, vol. 160, no. 9, pp. A1473-A1481, 2013.
[19]
E. Jacques et al., "Piezo-electrochemical effect in lithium-intercalated carbon fibres," Electrochemistry communications, vol. 35, pp. 65-67, 2013.
[20]
M. Wesselmark et al., "The impact of iridium on the stability of platinum on carbon thin-filmmodel electrodes," Electrochimica Acta, vol. 111, pp. 152-159, 2013.

2012

[1]
J. Gustavsson et al., "In-situ activated hydrogen evolution by molybdate addition to neutral and alkaline electrolytes," Journal of Electrochemical Science and Engineering, vol. 2, no. 3, pp. 105-120, 2012.
[2]
A. Alexiadis, A. Cornell and M. P. Dudukovic, "Comparison between CFD calculations of the flow in a rotating disk cell and the Cochran/Levich equations," Journal of Electroanalytical Chemistry, vol. 669, pp. 55-66, 2012.
[3]
M. Willgert, M. Hellqvist Kjel and M. Johansson, "Thiol-ene systems in lithium ion conducting thermoset electrolytes," Abstract of Papers of the American Chemical Society, vol. 243, 2012.
[4]
M. Willgert, M. H. Kjell and M. Johansson, "Effect of Lithium Salt Content on the Performance of Thermoset Lithium Battery Electrolytes," American Chemical Society Symposium Series (ACS), pp. 55-65, 2012.
[5]
A. Alexiadis et al., "Transition to pseudo-turbulence in a narrow gas-evolving channel," Theoretical and Computational Fluid Dynamics, vol. 26, no. 6, pp. 551-564, 2012.
[6]
M. Klett et al., "Quantifying mass transport during polarization in a Li Ion battery electrolyte by in situ 7Li NMR imaging," Journal of the American Chemical Society, vol. 134, no. 36, pp. 14654-14657, 2012.
[7]
V. Klass, M. Behm and G. Lindbergh, "Evaluating Real-Life Performance of Lithium-Ion Battery Packs in Electric Vehicles," Journal of the Electrochemical Society, vol. 159, no. 11, pp. A1856-A1860, 2012.
[8]
Y. Huang et al., "An Air-Stable Fe3S4 Complex with Properties Similar to Those of the HOXair State of the Diiron Hydrogenases," European Journal of Inorganic Chemistry, no. 27, pp. 4259-4263, 2012.
[9]
B. Ebin, S. Gürmen and G. Lindbergh, "Electrochemical properties of nanocrystalline LiCu xMn 2-xO 4 (x = 0.2-0.6) particles prepared by ultrasonic spray pyrolysis method," Materials Chemistry and Physics, vol. 136, no. 2-3, pp. 424-430, 2012.
[10]
A. Alexiadis et al., "On the stability of the flow in multi-channel electrochemical systems," Journal of Applied Electrochemistry, vol. 42, no. 9, pp. 679-687, 2012.
[11]
K. Wiezell, N. Holmström and G. Lindbergh, "Studying Low-Humidity Effects in PEFCs Using EIS II : Modeling," Journal of the Electrochemical Society, vol. 159, no. 8, pp. F379-F392, 2012.
[12]
A. Alexiadis et al., "The flow pattern in single and multiple submerged channels with gas evolution at the electrodes," International Journal of Chemical Engineering, vol. 2012, pp. 392613, 2012.
[14]
T. G. Zavalis, M. Behm and G. Lindbergh, "Investigation of Short-Circuit Scenarios in a Lithium-Ion Battery Cell," Journal of the Electrochemical Society, vol. 159, no. 6, pp. A848-A859, 2012.
[15]
C. M. Lousada et al., "Mechanism of H2O2 Decomposition on Transition Metal Oxide Surfaces," The Journal of Physical Chemistry C, vol. 116, no. 17, pp. 9533-9543, 2012.
[16]
E. Jacques et al., "Impact of electrochemical cycling on the tensile properties of carbon fibres for structural lithium-ion composite batteries," Composites Science And Technology, vol. 72, no. 7, pp. 792-798, 2012.
[17]
J. Gustavsson, G. Lindbergh and A. Cornell, "In-situ activation of hydrogen evolution in pH-neutral electrolytes by additions of multivalent cations," International journal of hydrogen energy, vol. 37, no. 12, pp. 9496-9503, 2012.
[18]
J. B. Parsa, M. Abbasi and A. Cornell, "Improvement of the Current Efficiency of the Ti/Sn-Sb-Ni Oxide Electrode via Carbon Nanotubes for Ozone Generation," Journal of the Electrochemical Society, vol. 159, no. 5, pp. D265-D269, 2012.
[19]
S. Leijonmarck et al., "Electrolytically assisted debonding of adhesives : An experimental investigation," International Journal of Adhesion and Adhesives, vol. 32, pp. 39-45, 2012.
[20]
M. Benamira et al., "Gadolinia-doped ceria mixed with alkali carbonates for SOFC applications : II - An electrochemical insight," International journal of hydrogen energy, vol. 37, no. 24, pp. 19371-19379, 2012.
[21]
N. Holmström, K. Wiezell and G. Lindbergh, "Studying Low-Humidity Effects in PEFCs Using EIS I : Experimental," Journal of the Electrochemical Society, vol. 159, no. 8, pp. F369-F378, 2012.

2011

[1]
S. Sevencan, G. A. Altun-Ciftcioglu and M. A. N. Kadirgan, "A Preliminary Feasibility Study of a Fuel Cell Based Combined Cooling Heating and Power System," Gazi University Journal of Polytechnic, vol. 14, no. 3, pp. 199-202, 2011.
[2]
S. Sevencan, G. Altun Çiftçioǧlu and N. Kadirgan, "A preliminary environmental assessment of power generation systems for a stand-alone mobile house with cradle to gate approach," Gazi University Journal of Science, vol. 24, no. 3, pp. 487-494, 2011.
[3]
R. Wreland Lindström and G. Lindbergh, "Teknikbevakning av polymera bränsleceller (PEFC)," , Elforsk rapport, 11:37, 2011.
[4]
R. Wreland Lindström, "Bränsleceller och material : Rapport från arbetsseminarium 16 juni 2011," , Elforsk rapport, 11:46, 2011.
[5]
M. Hellqvist Kjell et al., "PAN-based carbon fiber negative electrodes for structural lithium-ion batteries," Journal of the Electrochemical Society, vol. 158, no. 12, pp. A1455-A1460, 2011.
[6]
E. Yli-Rantala et al., "Graphitised Carbon Nanofibres as Catalyst Support for PEMFC," Fuel Cells, vol. 11, no. 6, pp. 715-725, 2011.
[7]
M. Willgert et al., "Photoinduced free radical polymerization of thermoset lithium battery electrolytes," European Polymer Journal, vol. 47, no. 12, pp. 2372-2378, 2011.
[8]
A. Alexiadis et al., "Liquid-gas flow patterns in a narrow electrochemical channel," Chemical Engineering Science, vol. 66, no. 10, pp. 2252-2260, 2011.
[9]
J. Degerman Engfeldt et al., "Methodology for measuring current distribution effects in electrochromic smart windows," Applied Optics, vol. 50, no. 29, pp. 5639-5646, 2011.
[10]
A. Alexiadis et al., "On the electrode boundary conditions in the simulation of two phase flow in electrochemical cells," International journal of hydrogen energy, vol. 36, no. 14, pp. 8557-8559, 2011.
[11]
M. Willgert et al., "Photoinduced polymerization of structural lithium-ion battery electrolytes," Abstract of Papers of the American Chemical Society, vol. 241, 2011.
[13]
A. Nyman, M. Behm and G. Lindbergh, "A Theoretical and Experimental Study of the Mass Transport in Gel Electrolytes : I. Mathematical Analysis of Characterization Method," Journal of the Electrochemical Society, vol. 158, no. 6, pp. A628-A635, 2011.
[14]
A. Nyman, M. Behm and N. G. Lindbergh, "A Theoretical and Experimental Study of the Mass Transport in Gel Electrolytes : II. Experimental Characterization of LiPF6-EC-PC-P(VdF-HFP)," Journal of the Electrochemical Society, vol. 158, no. 6, pp. A636-A643, 2011.
[15]
S. Leijonmarck et al., "Electrochemical characterization of electrically induced adhesive debonding," Journal of the Electrochemical Society, vol. 158, no. 10, pp. P109-P114, 2011.
[16]
[17]
B. Wickman et al., "Tungsten oxide in polymer electrolyte fuel cell : A thin-film model electrode study," Electrochimica Acta, vol. 56, no. 25, pp. 9496-9503, 2011.
[18]
M. D. Karkas et al., "Light-Induced Water Oxidation by a Ru complex Containing a Bio-Inspired Ligand," Chemistry - A European Journal, vol. 17, no. 28, pp. 7953-7959, 2011.

2010

[1]
R. J. Behm et al., "Electrocatalytic Function of Nanostructured Surfaces – Reaction and Mass Transport," in Nanotechnology : Fundamentals and Applications of Functional Nanostructures, T. Schimmel, H. v. Löhneysen, M Barczewski, Eds Ed., Stuttgart : Baden-Württemberg Stiftnung, 2010, pp. 281-303.
[2]
M. Wesselmark et al., "Electrochemical performance and stability of thin film electrodes with metal oxides in polymer electrolyte fuel cells," Electrochimica Acta, vol. 55, no. 26, pp. 7590-7596, 2010.
[3]
K. Kortsdottir et al., "Influence of toluene contamination at the hydrogen Pt/C anode in a proton exchange membrane fuel cell," Electrochimica Acta, vol. 55, no. 26, pp. 7643-7651, 2010.
[4]
A. Nyman et al., "Analysis of the Polarization in a Li-Ion Battery Cell by Numerical Simulations," Journal of the Electrochemical Society, vol. 157, no. 11, pp. A1236-A1246, 2010.
[5]
J. Gustavsson, L. Nylen and A. Cornell, "Rare earth metal salts as potential alternatives to Cr(VI) in the chlorate process," Journal of Applied Electrochemistry, vol. 40, no. 8, pp. 1529-1536, 2010.
[7]
C. Malmgren et al., "Nanocrystallinity in RuO2 coatings-Influence of precursor and preparation temperature," Thin Solid Films, vol. 518, no. 14, pp. 3615-3618, 2010.
[8]
F. Hallberg et al., "Electrokinetic transport of water and methanol in Nafion membranes as observed by NMR spectroscopy," Electrochimica Acta, vol. 55, no. 10, pp. 3542-3549, 2010.
[9]
M. Wesselmark et al., "Hydrogen oxidation reaction on thin platinum electrodes in the polymer electrolyte fuel cell," Electrochemistry communications, vol. 12, no. 11, pp. 1585-1588, 2010.
[10]
R. Wreland Lindström et al., "Active Area Determination of Porous Pt Electrodes Used in Polymer Electrolyte Fuel Cells : Temperature and Humidity Effects," Journal of the Electrochemical Society, vol. 157, no. 12, pp. B1795-B1801, 2010.
[12]
R. Wreland Lindström et al., "Electrocatalysis and transport effects on nanostructured Pt/GC electrodes," J ELECTROANAL CHEM, vol. 644, no. 2, pp. 90-102, 2010.

2008-2009

[1]
C. Lagergren and G. Lindbergh, "Teknikbevakning av stationära smältkarbonatbränsleceller (MCFC) 2008," Elforsk, Elforsk rapport, 09:45, 2009.
[2]
R. Wreland Lindström, L. Hildebrandt and G. Lindbergh, "Polymera bränsleceller (PEMFC) : Teknikbevakningsrapport 2009," , Elforsk rapport, 10:57, 2009.
[3]
K. Ciosek et al., "Energy storage activities in the Swedish hybrid vehicle centre," World Electric Vehicle Journal, vol. 3, no. 1, 2009.
[5]
L. Nylén and A. M. Cornell, "Effects of electrolyte parameters on the iron/steel cathode potential in the chlorate process," Journal of Applied Electrochemistry, vol. 39, no. 1, pp. 71-81, 2009.
[6]
[7]
Y. Xu et al., "A New Dinuclear Ruthenium Complex as an Efficient Water Oxidation Catalyst," Inorganic Chemistry, vol. 48, no. 7, pp. 2717-2719, 2009.
[8]
G. Lindbergh and R. Wreland Lindström, "Teknikbevakning av polymera bränsleceller (PEMFC) 2008," , Elforsk rapport, 09:44, 2008.
[9]
C. Malmgren et al., "Nanoscale characterization of crystallinity in DSA (R) coating," Journal of Physics, Conference Series, vol. 100, no. Part 5, pp. 052026, 2008.
[10]
N. Ipek, M. Vynnycky and A. M. Cornell, "A coupled electrochemical and hydrodynamical two-phase model for the electrolytic pickling of steel," Journal of the Electrochemical Society, vol. 155, no. 4, pp. P33-P43, 2008.
[11]
A. Nyman, M. Behm and G. Lindbergh, "Electrochemical characterisation and modelling of the mass transport phenomena in LiPF6-EC-EMC electrolyte," Electrochimica Acta, vol. 53, no. 22, pp. 6356-6365, 2008.
[14]
M. Wesselmark, C. Lagergren and G. Lindbergh, "Methanol and formic acid oxidation in zinc electrowinning under process conditions," Journal of Applied Electrochemistry, vol. 38, no. 1, pp. 17-24, 2008.
[16]
S. von Kraemer et al., "Substitution of Nafion with Sulfonated Polysulfone in Membrane-Electrode Assembly Components for 60-120 °C PEMFC Operation," Journal of the Electrochemical Society, vol. 155, no. 10, pp. B1001-B1007, 2008.
[17]
L. Nylén, J. Gustavsson and A. M. Cornell, "Cathodic reactions on an iron RDE in the presence of Y(III)," Journal of the Electrochemical Society, vol. 155, no. 10, pp. E136-E142, 2008.
[18]
S. von Kraemer et al., "Evaluation of TiO2 as catalyst support in Pt-TiO2/C composite cathodes for the proton exchange membrane fuel cell," Journal of Power Sources, vol. 180, no. 1, pp. 185-190, 2008.

2006-2007

[1]
J. Berendson, "Electrochemical methods," in Surface Characterization : A User's Sourcebook, : Wiley-Blackwell, 2007, pp. 590-606.
[2]
T. Vernersson and G. Lindbergh, "A model for mass transport in the electrolyte membrane of a DMFC," Journal of Applied Electrochemistry, vol. 37, no. 4, pp. 429-438, 2007.
[3]
J. Wulff and A. M. Cornell, "Cathodic current efficiency in the chlorate process," Journal of Applied Electrochemistry, vol. 37, no. 1, pp. 181-186, 2007.
[4]
N. Ipek, A. M. Cornell and M. Vynnycky, "A mathematical model for the electrochemical pickling of steel," Journal of the Electrochemical Society, vol. 154, no. 10, pp. P108-P119, 2007.
[5]
N. Holmström et al., "The influence of the gas diffusion layer on water management in polymer electrolyte fuel cells," Fuel Cells, vol. 7, no. 4, pp. 306-313, 2007.
[6]
H. Ekstrom et al., "Evaluation of a sulfophenylated polysulfone membrane in a fuel cell at 60 to 110 degrees C," Solid State Ionics, vol. 178, no. 13-14, pp. 959-966, 2007.
[7]
S. Randström, C. Lagergren and S. Scaccia, "Investigation of a Ni(Mg,Fe)O Cathode for Molten Carbonate Fuel Cell Applications," Fuel Cells, vol. 7, no. 3, pp. 218-224, 2007.
[9]
M. Gustavsson et al., "Thin film Pt/TiO2 catalysts for the polymer electrolyte fuel cell," Journal of Power Sources, vol. 163, no. 2, pp. 671-678, 2007.
[10]
H. Ekström et al., "Nanometer-thick films of titanium oxide acting as electrolyte in the polymer electrolyte fuel cell," Electrochimica Acta, vol. 52, no. 12, pp. 4239-4245, 2007.
[12]
K. Wikander et al., "On the influence of Pt particle size on PEMFC cathode performance," Electrochimica Acta, vol. 52, no. 24, pp. 6848-6855, 2007.
[13]
[14]
H. Ekström et al., "A Novel Approach for Measuring Catalytic Activity of Planar Model Catalysts in the Polymer Electrolyte Fuel Cell Environment," Journal of the Electrochemical Society, vol. 153, no. 4, pp. A724-A730, 2006.
[15]
P. Gode et al., "A novel sulfonated dendritic polymer as the acidic component in proton conducting membranes," Solid State Ionics, vol. 177, no. 7-8, pp. 787-794, 2006.
[16]
D. Pettersson et al., "An experimental system for evaluation of well-defined catalysts on nonporous electrodes in realistic DMFC environment," Electrochimica Acta, vol. 51, no. 28, pp. 6584-6591, 2006.
[17]
C. Wallmark et al., "Integration of the components in a small-scale stationary research PEFC system," Journal of Power Sources, vol. 159, no. 1, pp. 613-625, 2006.
[20]
R. Dinnebier et al., "Crystal structures of the trifluoromethyl sulfonates M(SO3CF3)(2) (M = Mg, Ca, Ba, Zn, Cu) from synchrotron X-ray powder diffraction data," Acta Crystallographica Section B : Structural Science, vol. 62, pp. 467-473, 2006.
[21]
L. Hildebrandt, R. Dinnebier and M. Jansen, "Crystal structure and ionic conductivity of three polymorphic phases of rubidium trifluoromethyl sulfonate, RbSO3CF3," Inorganic Chemistry, vol. 45, no. 8, pp. 3217-3223, 2006.
[22]
A. Ringuede et al., "Solubility and electrochemical studies of LiFeO2-LiCoO2-NiO materials for the MCFC cathode application," Journal of Power Sources, vol. 160, no. 2, pp. 789-795, 2006.
[23]
A. Wijayasinghe, B. Bergman and C. Lagergren, "LiFeO2-LiCoO2-NiO materials for Molten Carbonate Fuel Cell cathodes. Part II. Fabrication and characterization of porous gas diffusion cathodes," Solid State Ionics, vol. 177, no. 1-2, pp. 175-184, 2006.
[24]
A. Wijayasinghe, B. Bergman and C. Lagergren, "LiFeO2-LiCoO2-NiO materials for Molten Carbonate Fuel Cell cathodes. Part I : Powder synthesis and material characterization," Solid State Ionics, vol. 177, no. 1-2, pp. 165-173, 2006.
[25]
L. van Wuellen et al., "NMR studies of cation transport in the crystalline ion conductors MCF3SO3 (M = Li, Na) and Li7TaO6," Solid State Ionics, vol. 177, no. 19-25, pp. 1665-1672, 2006.
[26]
S. von Kraemer et al., "Gas Diffusion Electrodes and Membrane Electrode Assemblies Based on a Sulfonated Polysulfone for High-Temperature PEMFC," Journal of the Electrochemical Society, vol. 153, no. 11, pp. A2077-A2084, 2006.
[27]
L. Nylén and A. M. Cornell, "Critical Anode Potential in the Chlorate Process," Journal of the Electrochemical Society, vol. 153, no. 1, pp. D14-D20, 2006.
[28]
S. Randström, C. Lagergren and P. Capobianco, "Corrosion of anode current collectors in molten carbonate fuel cells," Journal of Power Sources, vol. 160, no. 2, pp. 782-788, 2006.
[29]
K. Wikander et al., "Alternative catalysts and carbon support material for PEMFC," Fuel Cells, vol. 6, no. 1, pp. 21-25, 2006.

2004-2005

[1]
L. Hildebrandt, R. Dinnebier and M. Jansen, "Crystal structure and ionic conductivity of cesium trifluoromethyl sulfonate, CSSO3CF3," Zeitschrift für Anorganische und Allgemeines Chemie, vol. 631, no. 9, pp. 1660-1666, 2005.
[2]
L. van Wullen, L. Hildebrandt and M. Jansen, "Cation mobility and anion reorientation in lithium trifluoromethane sulfonate, LiCF3SO3," Solid State Ionics, vol. 176, no. 15-16, pp. 1449-1456, 2005.
[4]
H. Matic et al., "In situ micro-Raman on the membrane in a working PEM cell," Electrochemical and solid-state letters, vol. 8, no. 1, pp. A5-A7, 2005.
[5]
F. Jaouen et al., "Adhesive copper films for an air-breathing polymer electrolyte fuel cell," Journal of Power Sources, vol. 144, no. 1, pp. 113-121, 2005.
[6]
S. Enback and G. Lindbergh, "Experimentally validated model for CO oxidation on PtRu/C in a porous PEFC electrode," Journal of the Electrochemical Society, vol. 152, no. 1, pp. A23-A31, 2005.
[7]
M. Wesselmark, C. Lagergren and G. Lindbergh, "Methanol oxidation as anode reaction in zinc electrowinning," Journal of the Electrochemical Society, vol. 152, no. 11, pp. D201-D207, 2005.
Page responsible:Jing Ying Ko
Belongs to: Department of Chemical Engineering
Last changed: Mar 22, 2019