Skip to main content
To KTH's start page To KTH's start page

50 latest publications

Publications

[1]
X. Yue et al., "Unveiling nano-scale chemical inhomogeneity in surface oxide films formed on V- and N-containing martensite stainless steel by synchrotron X-ray photoelectron emission spectroscopy/microscopy and microscopic X-ray absorption spectroscopy," Journal of Materials Science & Technology, vol. 205, pp. 191-203, 2025.
[2]
D. Wang et al., "A strong enhancement of corrosion and wear resistance of polyurethane-based coating by chemically grafting of organosolv lignin," Materials Today Chemistry, vol. 35, 2024.
[3]
D. Chen et al., "Correlation between pitting susceptibility and surface acidity, point of zero charge of passive film on aluminum: Influence of alloying elements," Corrosion Science, vol. 227, 2024.
[4]
A. Larsson et al., "Dynamics of early-stage oxide formation on a Ni-Cr-Mo alloy," NPJ MATERIALS DEGRADATION, vol. 8, no. 1, 2024.
[5]
T. Chang et al., "Effect of blue light illumination on atmospheric corrosion and bacterial adhesion on copper," Corrosion Science, vol. 230, 2024.
[6]
M. Eriksson et al., "Effects of Gas Layer Thickness on Capillary Interactions at Superhydrophobic Surfaces," Langmuir, vol. 40, no. 9, pp. 4801-4810, 2024.
[7]
S. Li, "Electro-Interfacial Composition Control by Ionic Liquid Technology : Nanostructure, Self-Assembly, and Friction," Doctoral thesis Stockholm : KTH Royal Institute of Technology, TRITA-CBH-FOU, 2023:61, 2024.
[8]
D. Wang et al., "Green synergy : Eco-friendly, high-performance anti-corrosion and wear-resistant coatings utilizing organosolv lignin and polydimethylsiloxane," Progress in organic coatings, vol. 190, 2024.
[9]
X. Yue et al., "In depth analysis of the passive film on martensitic tool alloy: Effect of tempering temperature," Corrosion Science, vol. 234, 2024.
[10]
J. E. Campos Pacheco et al., "Inhalable porous particles as dual micro-nano carriers demonstrating efficient lung drug delivery for treatment of tuberculosis," Journal of Controlled Release, vol. 369, pp. 231-250, 2024.
[11]
A. B. Reddy et al., "Ionic liquids enhance electrical conductivity of greases : an impedance spectroscopy study," Colloids and Surfaces A : Physicochemical and Engineering Aspects, vol. 683, 2024.
[12]
M. Kral et al., "Nano-FTIR spectroscopy of surface confluent polydopamine films – What is the role of deposition time and substrate material?," Colloids and Surfaces B : Biointerfaces, vol. 235, 2024.
[13]
A. Wärnheim et al., "Nanomechanical and nano-FTIR analysis of polyester coil coatings before and after artificial weathering experiments," Progress in organic coatings, vol. 190, 2024.
[14]
C. Petersson et al., "Negative effect of bismuth in lead on liquid metal embrittlement of a ferritic steel," Journal of Nuclear Materials, vol. 588, 2024.
[15]
V. A. Bautin et al., "Selective laser melting of low-alloyed titanium based alloy with a large solidification range," Heliyon, vol. 10, no. 3, 2024.
[16]
O. S. Hammond et al., "Small-Angle Neutron Scattering Insights into 2-Ethylhexyl Laurate : A Remarkable Bioester," ACS Sustainable Chemistry and Engineering, vol. 12, no. 5, pp. 1816-1821, 2024.
[17]
N. M. Taylor et al., "Surface forces and friction between Langmuir-Blodgett polymer layers in a nonpolar solvent," Journal of Colloid and Interface Science, vol. 653, pp. 1432-1443, 2024.
[18]
A. Alijagic et al., "A Novel Nanosafety Approach Using Cell Painting, Metabolomics, and Lipidomics Captures the Cellular and Molecular Phenotypes Induced by the Unintentionally Formed Metal-Based (Nano)Particles," Cells, vol. 12, no. 2, 2023.
[19]
N. Wojas et al., "Calcite Surfaces Modified with Carboxylic Acids (C2 to C18) : Layer Organization, Wettability, Stability, and Molecular Structural Properties," Langmuir, vol. 39, no. 42, pp. 14840-14852, 2023.
[20]
I. Odnevall et al., "Characterization and Toxic Potency of Airborne Particles Formed upon Waste from Electrical and Electronic Equipment Waste Recycling : A Case Study," ACS ENVIRONMENTAL AU, vol. 3, no. 6, pp. 370-382, 2023.
[21]
V. Ratia-Hanby et al., "Characterization of surface films that develop on pre-oxidized copper in anoxic simulated groundwater with sulphide," Colloids and Surfaces A : Physicochemical and Engineering Aspects, vol. 676, 2023.
[22]
P. Guo et al., "Chloride Induced Secondary Passive Film Failure for Laser Additive Manufacturing Nickel-Based Superalloys during Electrochemical Machining," Journal of the Electrochemical Society, vol. 170, no. 6, 2023.
[23]
M. Liu et al., "Density-functional theory study of point defect formation and diffusion in alpha-alumina and effects of applied strain and alloy doping," Materials Today Communications, vol. 34, 2023.
[24]
D. Chen et al., "Development of the General Methodology for Determining the Point of Zero Charge of Oxide Films by Contact Angle Titration," Journal of the Electrochemical Society, vol. 170, no. 8, 2023.
[25]
X. Yue et al., "Effect of hydrogen on the passivation for ultra-thin 316 L SS foil," NPJ MATERIALS DEGRADATION, vol. 7, no. 1, 2023.
[26]
T. Chang et al., "Effects of interactions between natural organic matter and aquatic organism degradation products on the transformation and dissolution of cobalt and nickel-based nanoparticles in synthetic freshwater," Journal of Hazardous Materials, vol. 445, pp. 130586-130586, 2023.
[27]
M. Eriksson et al., "Effects of liquid surface tension on gas capillaries and capillary forces at superamphiphobic surfaces," Scientific Reports, vol. 13, no. 1, 2023.
[28]
N. Alinejadian et al., "Electro-deposited nano-Ni/reduced graphene oxide composite film of corrugated surface for high voltammetric sensitivity," Materials Chemistry and Physics, vol. 297, pp. 127288, 2023.
[29]
N. Kotov et al., "Elucidating the fine-scale structural morphology of nanocellulose by nano infrared spectroscopy," Carbohydrate Polymers, vol. 302, 2023.
[30]
J. E. C. Pacheco et al., "Encapsulation of clofazimine in mesoporous silica as apotential dry powder formulation for treating tuberculosis," Journal of Aerosol Medicine, vol. 36, no. 6, pp. A13-A13, 2023.
[31]
M. Wolff et al., "Grazing incidence neutron scattering for the study of solid–liquid interfaces," in Encyclopedia of Solid-Liquid Interfaces, : Elsevier, 2023, pp. 1-1.
[32]
H. L. Karlsson et al., "Health hazards of particles in additive manufacturing : a cross-disciplinary study on reactivity, toxicity and occupational exposure to two nickel-based alloys," Scientific Reports, vol. 13, no. 1, 2023.
[33]
A. Khort et al., "High-performance selective NO2 gas sensor based on In2O3–graphene–Cu nanocomposites," Scientific Reports, vol. 13, no. 1, 2023.
[34]
A. Wärnheim, "Holistic evaluation and testing of coil coatings," Licentiate thesis : KTH Royal Institute of Technology, TRITA-CBH-FOU, 2023:20, 2023.
[35]
L. Fan et al., "Holistic functional biomimetics : a key to make an efficient electrocatalyst for water oxidation," Journal of Materials Chemistry A, vol. 11, no. 20, pp. 10669-10676, 2023.
[36]
B. N.J. Persson and E. Tyrode, "Ice breakloose friction," Journal of Chemical Physics, vol. 158, no. 23, 2023.
[37]
M. Nguyen et al., "Improving OFF-State Bias-Stress Stability in High-Mobility Conjugated Polymer Transistors with an Antisolvent Treatment," Advanced Materials, vol. 35, no. 16, 2023.
[38]
A. Larsson et al., "In situ quantitative analysis of electrochemical oxide film development on metal surfaces using ambient pressure X-ray photoelectron spectroscopy : Industrial alloys," Applied Surface Science, vol. 611, 2023.
[39]
D. Wang et al., "In-situ coating wear condition monitoring based on solid-liquid triboelectric nanogenerator and its mechanism study," Nano Energy, vol. 112, 2023.
[40]
T. Abitbol et al., "Isolation of Mixed Compositions of Cellulose Nanocrystals, Microcrystalline Cellulose, and Lignin Nanoparticles from Wood Pulps," ACS Omega, vol. 8, no. 24, pp. 21474-21484, 2023.
[41]
K. Podbolotov et al., "Low-temperature reactive spark plasma sintering of dense SiC-Ti3SiC2 ceramics," Journal of the European Ceramic Society, vol. 43, no. 4, pp. 1343-1351, 2023.
[42]
S. Yudin et al., "Mechanism and kinetics of high-temperature oxidation of medium- and high-entropy carbides in air," Materials & design, vol. 231, pp. 112048-112048, 2023.
[43]
C. Liu et al., "Multifunctional Materials Strategies for Enhanced Safety of Wireless, Skin-Interfaced Bioelectronic Devices," Advanced Functional Materials, vol. 33, no. 34, 2023.
[44]
W. Li et al., "Numerical simulation of carbon steel atmospheric corrosion under varying electrolyte-film thickness and corrosion product porosity," NPJ MATERIALS DEGRADATION, vol. 7, no. 1, 2023.
[45]
Y. Li et al., "Origin of anomalously stabilizing ice layers on methane gas hydrates near rock surface," Physical Chemistry, Chemical Physics - PCCP, vol. 25, no. 9, pp. 6636-6652, 2023.
[46]
X. Yue et al., "Penetration of corrosive species into copper exposed to simulated O2-free groundwater by time-of-flight secondary ion mass spectrometry (ToF-SIMS)," Corrosion Science, vol. 210, pp. 110833, 2023.
[47]
J. Fiedler et al., "Perspectives on weak interactions in complex materials at different length scales," Physical Chemistry, Chemical Physics - PCCP, vol. 25, no. 4, pp. 2671-2705, 2023.
[48]
R. Telaretti Leggieri et al., "Polyester-melamine coil coating formulation reinforced with surface-modified cellulose nanofibrils," Progress in organic coatings, vol. 182, 2023.
[49]
J. Pan et al., "Reply to comment on "Penetration of corrosive species into copper exposed to simulated O2-free groundwater by time-of-flight secondary ion mass spectrometry (ToF-SIMS)"," Corrosion Science, vol. 217, 2023.
[50]
C. Petersson, P. Szakalos and D. D. Stein, "Slow strain rate testing of Fe-10Cr-4Al ferritic steel in liquid lead and lead-bismuth eutectic," Nuclear Materials and Energy, vol. 34, 2023.
Full list in the KTH publications portal