Publikationer inom Tillverkning och mätsystem
Här visas de 50 senaste publikationerna från enheten för tillverkning och mätsystem.
[1]
M. Subasic et al.,
"Fatigue strength improvement of additively manufactured 316L stainless steel with high porosity through preloading,"
International Journal of Fatigue, vol. 180, 2024.
[2]
M. Roci och A. Rashid,
"Economic and environmental impact of circular business models : A case study of White Goods-as-a-Service using multi-method simulation modelling,"
Journal of Cleaner Production, vol. 407, 2023.
[3]
M. Gonzalez et al.,
"Influence of the velocity on quasi-static deflections of industrial articulated robots,"
The International Journal of Advanced Manufacturing Technology, vol. 125, no. 3-4, s. 1429-1438, 2023.
[4]
S. Kokare et al.,
"Life Cycle Assessment of a Jet Printing and Dispensing Machine,"
i 5th International Conference on Industry 4.0 and Smart Manufacturing, 2023.
[5]
L. Zeyu,
"Electron beam powder bed fusion of Nitinol : A development from production process window towards delicate structures,"
Doktorsavhandling : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2023:35, 2023.
[6]
M. Gonzalez, B. Peukert och A. Archenti,
"Assessment of Fault Detection and Monitoring Techniques for Effective Digitalization,"
i 33rd European Safety and Reliability Conference : The Future of Safety in a Reconnected World, 2023, s. 1705.
[7]
J. Holmberg et al.,
"Machining of additively manufactured alloy 718 in as-built and heat-treated condition : surface integrity and cutting tool wear,"
The International Journal of Advanced Manufacturing Technology, vol. 130, no. 3-4, s. 1823-1842, 2023.
[8]
B. Łukasz et al.,
"Influence of tool geometry on residual stresses and strains in fine blanking process of electrical steel,"
i 25th International Conference on Computer Methods in Mechanics, 4-7 September 2023, Gliwice, Poland, 2023.
[9]
V. Söderberg et al.,
"The effect of technology development on components machined in the current production system used by the OEMs in the truck industry,"
i 56th CIRP International Conference on Manufacturing Systems, CIRP CMS 2023, 2023, s. 1588-1593.
[10]
X. Zhao et al.,
"Effect of Scanning Strategy on Thermal Stresses and Strains during Electron Beam Melting of Inconel 625 : Experiment and Simulation,"
Materials, vol. 16, no. 1, 2023.
[11]
M. Gonzalez et al.,
"Online compliance error compensation system for industrial manipulators in contact applications,"
Robotics and Computer-Integrated Manufacturing, vol. 76, s. 102305-102305, 2022.
[12]
X. Zhao,
"Additive manufacturing of Ni-based Superalloys- an analysis of parameter and strategy driven properties in Electron Beam Melting Process,"
Doktorsavhandling Stockholm Sweden : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2022:16, 2022.
[13]
A. de Giorgio et al.,
"Assessing the influence of expert video aid on assembly learning curves,"
Journal of manufacturing systems, vol. 62, s. 263-269, 2022.
[14]
M. Yang, X. Bao och L. Zeyu,
"A STUDY ON THE BASIC PRINCIPLES OF METAPHORICAL THINKING IN MYTHOLOGICAL LANGUAGE AND THE CHANGES OF EMOTIONAL BEHAVIOR,"
International Journal of Neuropsychopharmacology, vol. 25, no. SUPPL 1, s. A94-A94, 2022.
[15]
S. Amir et al.,
"Towards circular economy : A guiding framework for circular supply chain implementation,"
Business Strategy and the Environment, 2022.
[16]
R. Tomkowski,
The Barkhasuen Noise Measurements : Good Practice Guide.
2. uppl. Stockholm : KTH Royal Institute of Technology, 2022.
[17]
N. A. Theissen et al.,
"Towards quasi-static kinematic calibration of serial articulated industrial manipulators,"
i MED 2022 30th Mediterranean Conference on Control and Automation, 2022, s. 872-877.
[18]
M.-U. Rashid, R. Tomkowski och A. Archenti,
"Effect of Surface Pre-Treatment on the Adhesion between HiPIMS Thick Cu:CuCNx Coating and WC-Co Shim,"
Coatings, vol. 12, no. 10, 2022.
[19]
M. Roci et al.,
"Towards Circular Manufacturing Systems implementation : A Complex Adaptive Systems perspective using modelling and simulation as a quantitative analysis tool,"
Sustainable Production and Consumption, vol. 31, s. 97-112, 2022.
[20]
A. Malakizadi et al.,
"Post-processing of additively manufactured metallic alloys – A review,"
International journal of machine tools & manufacture, vol. 179, no. 103908, 2022.
[21]
M. Roci,
"Circular Manufacturing Systems: Complex systems modelling and simulation for enhanced decision-making,"
Doktorsavhandling Stockholm : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2022:38, 2022.
[22]
N. A. Theissen, M. Gonzalez och A. Archenti,
"Working vs. operating space kinematic calibration of articulated industrial manipulators,"
i European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 22nd International Conference and Exhibition, EUSPEN 2022, 2022, s. 205-208.
[23]
M. Gonzalez, N. A. Theissen och A. Archenti,
"Experimental comparison of offline and online compliance compensation strategies for industrial articulated robots,"
i European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 22nd International Conference and Exhibition, EUSPEN 2022, 2022, s. 213-216.
[24]
J. A. Marwitz et al.,
"Accuracy Assessment of Articulated Industrial Robots using the Extended- and the Loaded-Double-Ball-Bar,"
Journal of Machine Engineering, vol. 22, no. 2, s. 80-98, 2022.
[25]
L. Zeyu, S. Dadbakhsh och A. Rashid,
"Developing processing windows for powder pre-heating in electron beam melting,"
Journal of Manufacturing Processes, vol. 83, s. 180-191, 2022.
[26]
F. M. Abdullah Asif, N. Salehi och M. Lieder,
"Consumer perceptions of circular business model : a case of leasing strollers,"
i Manufacturing Driving Circular Economy : Proceedings of the 18th Global Conference on Sustainable Manufacturing, October 5-7, 2022, Berlin, 2022, s. 953-960.
[27]
[28]
S. Dadbakhsh et al.,
"Process and geometrical integrity optimization of electron beam melting for copper,"
CIRP annals, vol. 71, s. 201-204, 2022.
[29]
R. Tomkowski et al.,
"Areal topography evaluation of a Ni-based alloy printed by electron beam melting (EBM) process,"
i European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 22nd International Conference and Exhibition, EUSPEN 2022, 2022, s. 433-436.
[30]
W. Yuan et al.,
"An Experimental Study of Micro-Dimpled Texture in Friction Control under Dry and Lubricated Conditions,"
Micromachines, vol. 13, no. 1, 2022.
[31]
R. Mansour, S. Gillgren och S. Dadbakhsh,
"Topology Optimization for Additive Manufacturing – A Numerical Study of Current Design Framework Capabilities and Limitations,"
i Advances in Transdisciplinary Engineering, 2022, s. 592-603.
[32]
M. Roci et al.,
"Multi-method simulation modelling of circular manufacturing systems for enhanced decision-making,"
MethodsX, vol. 9, s. 101709-101709, 2022.
[33]
N. A. Theissen et al.,
"Comparison of measured static and quasi-static deflections of industrial manipulators,"
i Laser Metrology and Machine Performance XIV - 14th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2021, 2021, s. 36-42.
[34]
B. Peukert och A. Archenti,
"A modular node-based modeling platform for the simulation of machining processes,"
i Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021, 2021, s. 351-354.
[35]
N. A. Theissen et al.,
"Measurement and identification of dynamic translational stiffness matrix on machine tools under static preloads,"
i Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021, 2021, s. 527-530.
[36]
A. de Giorgio et al.,
"Assessing the influence of expert video aid on assembly learning curves,"
, 2021.
[37]
S. Kokare et al.,
"A comparative life cycle assessment of stretchable and rigid electronics : a case study of cardiac monitoring devices,"
International Journal of Environmental Science and Technology, 2021.
[38]
F. Zaman och A. Rashid,
"Pakistan : restore autonomy to Higher Education Commission,"
Nature, vol. 592, no. 7856, s. 685-685, 2021.
[39]
L. Zeyu,
"Evaluating the electron beam spot size in electron beam melting for additive manufacturing,"
i Virtual Lamdamap 14th International Conference & Exhibition 10th -11th March 2021, 2021.
[40]
S. D. Jadhav et al.,
"Laser powder bed fusion additive manufacturing of highly conductive parts made of optically absorptive carburized CuCr1 powder,"
Materials & design, vol. 198, 2021.
[41]
N. A. Theissen et al.,
"Measurementand identification of dynamic translational stiffness matrix on machine tools understatic preloads,"
i European Society for Precision Engineering and Nanotechnology: 21stInternational Conference and Exhibition 7th – 11th June 2021., 2021.
[42]
N. A. Theissen et al.,
"Quasi-Static Compliance Calibration ofSerial Articulated Industrial Manipulators,"
International Journal of Automation Technology, no. 5, s. 590-598, 2021.
[43]
S. Ibaraki et al.,
"Evaluation of Kinematic and Compliance Calibrationof Serial Articulated Industrial Manipulators,"
International Journal of Automation Technology, vol. 15, no. 5, s. 567-580, 2021.
[44]
M. Roci et al.,
"A methodological approach to design products for multiple lifecycles in the context of circular manufacturing systems,"
Journal of Cleaner Production, vol. 296, s. 126534, 2021.
[45]
S. Amir, F. M. Abdullah Asif och M. Roci,
"Towards Circular Economy : Enhanced Decision-Making in Circular Manufacturing Systems,"
i Sustainable Consumption and Production, Volume II : Circular Economy and Beyond, Ranjula Bali Swain, Susanne Sweet red., 1. uppl. : Palgrave Macmillan, 2021, s. 257-279.
[46]
M. Gonzalez et al.,
"Experimental identification of the position-dependent dynamics of an industrial manipulator,"
i Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021, 2021, s. 235-238.
[47]
N. A. Theissen et al.,
"Measurement for the identification of static and quasi-static rotational stiffness,"
Precision engineering, vol. 72, s. 215-223, 2021.
[48]
X. Zhao et al.,
"Role of Superficial Defects and Machining Depth in Tensile Properties of Electron Beam Melting (EBM) Made Inconel 718,"
Journal of materials engineering and performance (Print), vol. 30, no. 3, s. 2091-2101, 2021.
[49]
L. Zeyu et al.,
"Evaluation of the electron beam spot size in electron beam melting for additive manufacturing,"
i Laser Metrology and Machine Performance XIV - 14th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2021, 2021, s. 89-92.
[50]
X. Zhao, S. Dadbakhsh och A. Rashid,
"Contouring strategies to improve the tensile properties and quality of EBM printed Inconel 625 parts,"
Journal of Manufacturing Processes, vol. 62, s. 418-429, 2021.