Skip to main content
To KTH's start page

Publications

50 latest publications

[1]
P. H. Cabral de Souza and K. Engvall, "Bed material aging in industrial-scale fast pyrolysis of biomass: Effects of ash and particle morphology on bio-oil yield and composition," Fuel, vol. 427, 2027.
[2]
A. Mohan and K. Engvall, "The role of pressure and steam on pyrolysis of biogenic waste : Value-added commodity products," Fuel, vol. 406B, 2026.
[3]
A. Yawar et al., "A novel isothermal cooling design for enhanced thermal performance of concentrated photovoltaics," Renewable energy, vol. 257, 2026.
[4]
L. Ma et al., "Investigation on heat transfer and coherent structures of rotational sweeping impingement jets with different frequencies and angles," International Journal of Heat and Mass Transfer, vol. 255, 2026.
[5]
R. Yao, S. Jafari and C. Duwig, "Intensified turbulent thermal convection with reversible reactive fluid," Energy Conversion and Management, vol. 352, 2026.
[6]
S. Jafari et al., "A novel numerical model for detailed simulation of CO2 capture," International Journal of Heat and Mass Transfer, vol. 260, 2026.
[7]
A. Behzadi et al., "Dynamic seasonal energy management of borehole thermal energy storage and smart heat pump synergies in fossil-free, ultra-efficient buildings," Applied Energy, vol. 406, 2026.
[8]
A. Behzadi et al., "An optimal adaptive control framework for reducing operating costs and enhancing thermal comfort in low-temperature heating systems," Energy Conversion and Management, vol. 356, 2026.
[9]
J. Zhang et al., "Detonation initiation mode in non-uniform coal particle suspensions subject to an incident blast wave," Combustion and Flame, vol. 288, 2026.
[10]
R. Palulli et al., "Impact of operating conditions on 𝑁𝑂 formation pathways in conditionsrelevant to 𝐻2-fuelled, high-temperature furnaces for iron ore pelletinduration," International journal of hydrogen energy, vol. 231, 2026.
[11]
A. Saxena and C. Duwig, "Efficient peak temperature control using precision cooling: A numerical study of a novel jet-pin-fin hybrid heat sink," Applied Thermal Engineering, vol. 298, 2026.
[12]
M. N. Khan et al., "Performance enhancement of microchannel heat sinks using pin fins embedded in the arcuate region of fan-shaped reentrant cavities," International Journal of Heat and Fluid Flow, vol. 120, 2026.
[13]
A. F. Suarez-Corredor et al., "Influence of catalyst supports on H2-SCR catalysts: A combined experimental and modeling approach including mass transfer," Applied Catalysis B : Environmental, vol. 395, 2026.
[14]
W. Raza, D. Ansari and J. H. Jeong, "Design and numerical investigation of a hybrid isothermal heat sink with variable-aspect-ratio elliptical pinfins for concentrated photovoltaic modules," Energy Conversion and Management, vol. 351, 2026.
[15]
A. Ameri, C. Duwig and H. Kusar, "Liquid distribution performance of Triply Periodic Minimal Surface packings : Effects of topology, porosity, flow rate and inlet configuration," Chemical engineering research & design, vol. 229, pp. 237-252, 2026.
[16]
N. Bazybek et al., "Transition Metal-Based Oxidation Catalysts to Mitigate Methane Emissions from Low-Concentration Sources," ACS Omega, vol. 11, no. 18, pp. 26220-26232, 2026.
[17]
A. Ameri, C. Duwig and H. Kusar, "Experimental evaluation of triply periodic minimal surface packings for CO2 absorption in carbon capture processes," Chemical Engineering Journal Advances, vol. 27, 2026.
[18]
D. Ansari et al., "A novel hybrid-composite microchannel heat sink for extreme hotspot mitigation," International journal of thermal sciences, vol. 208, 2025.
[19]
M. Pach Aige et al., "Exploring the formation mechanisms of internal diesel injector deposits : A laboratory study," Fuel, vol. 381, no. 133290, 2025.
[20]
R. Palulli, K. Zhang and C. Duwig, "Extended proper orthogonal decomposition based investigation of NO formation pathways in a non-premixed, hydrogen-fuelled, gas turbine combustor," Fuel, vol. 392, 2025.
[21]
A. Najarnezhadmashhadi et al., "Enhancing CO2 capture efficiency in a lab-scale spray tower : An experimental study on flow configurations using potassium carbonate," Chemical engineering research & design, vol. 216, pp. 186-199, 2025.
[22]
C. Zhou, C. Rosén and K. Engvall, "Use of in-bed primary catalyst in pressurized biomass fluidized bed gasification: Strategies for optimal use," Fuel, vol. 393, 2025.
[23]
A. Ameri, "Density, Refractive Index, Electrical Conductivity, pH, and FT-IR and UV-Vis Spectra of Potassium Carbonate-Potassium Bicarbonate-Water System," Journal of Chemical and Engineering Data, vol. 70, no. 2, pp. 766-786, 2025.
[24]
A. Ameri, "Predictive neural network model and empirical equations for the physico-chemical properties and solvent characteristics of potassium carbonate solutions in carbon capture processes," Frontiers of Chemical Science and Engineering, vol. 19, no. 4, 2025.
[25]
H. Yao, S. Jafari and C. Duwig, "Identification of heat transfer enhancement mechanism for multiple-jet impingement cooling with reversible reactive fluid," Applied Thermal Engineering, vol. 274, 2025.
[26]
S. Hruby et al., "An Investigation into Coolant-Related Internal Diesel Injector Deposits from Heavy-Duty Vehicles," ACS Omega, vol. 10, no. 23, pp. 24235-24251, 2025.
[27]
R. M. Lara Prado et al., "Pyrolysis of açai stems (Euterpe oleracea Mart.) and cocoa husks (Theobroma cacao L.) residues for the generation of added-value products in rural areas," Biomass Conversion and Biorefinery, vol. 15, no. 11, pp. 16793-16804, 2025.
[28]
L. Ma et al., "Influence of separation wake induced by convex curvature on unsteady film cooling behaviors with different film-hole configurations," International journal of thermal sciences, vol. 218, 2025.
[29]
M. Khosravi et al., "AI-driven hybrid control for hydrogen-integrated microgrids : Probabilistic energy management with vehicle-to-grid," International journal of hydrogen energy, vol. 146, 2025.
[30]
A. Najarnezhadmashhadi et al., "CO2 absorption in pilot-scale multi-nozzle spray towers: CFD and experimental study of flow and mass transfer dynamics," Results in Engineering (RINENG), vol. 27, 2025.
[31]
R. Yao et al., "Numerical investigation on reversible reactive flow inside ribbed channels with different inclined angles," International Journal of Heat and Mass Transfer, vol. 242, 2025.
[32]
P. H. Cabral de Souza et al., "Sustainable pathway towards red mud valorization through biomass thermochemical conversion and metals recovery," Bioresource Technology, vol. 434, 2025.
[33]
A. Ameri et al., "Comparative study of CO2 capture efficiency using sodium hydroxide and monoethanolamine solutions in a spray column," Atmospheric Environment X, vol. 28, 2025.
[34]
L. Ma et al., "Heat transfer and flow characteristics of a novel double wall cooling design embedded by primitive-type triply periodic minimal surface structures," International Journal of Heat and Fluid Flow, vol. 116, 2025.
[35]
L. Ma et al., "Investigation on cooling unsteadiness of trenched film-hole on convex surfaces with mainstream pulsation," Aerospace Science and Technology, vol. 166, 2025.
[36]
M. Falcone, A. Saxena and S. He, "Simulations of thermal stratification during thermal transients in a test facility for sodium-cooled fast reactors," Nuclear Engineering and Design, vol. 444, 2025.
[37]
C. Zhou et al., "Measurement and modeling of solids flow behaviors in an aerated standpipe and inclined pipe of circulating fluidized bed full-loop system," Powder Technology, vol. 449, 2025.
[38]
A. Saxena, M. Falcone and S. He, "Study of thermal stratification in the upper plenum of the liquid metal fast reactor under mixed convection – An LES of the flow in the E-SCAPE facility," Nuclear Engineering and Design, vol. 440, 2025.
[39]
J. Venuti Björkman et al., "A study of transient operation in a pilot-scale hydrotreater using real feedstocks," Chemical Engineering Journal, vol. 522, 2025.
[40]
J. Venuti Björkman et al., "Differences in Apparent Activity of Sulfided NiMo/γ-Al2O3 Hydrotreating Catalysts Elucidated by Dynamic Reactor Modelling," Topics in catalysis, vol. 68, no. 20, pp. 2494-2506, 2025.
[41]
S. P. Melath et al., "Infrared predissociation spectroscopy of cold trapped C2H−(H2) and C2H−(D2)," Molecular Physics, 2025.
[42]
P. Fernandez I Reixach, M. S. Chino Mamani and E. Kantarelis, "Effect of Cu Addition on the Selectivity of Ni-Based Catalysts for Methylcyclohexane Dehydrogenation," Topics in catalysis, vol. 68, no. 20, pp. 2478-2493, 2025.
[43]
M. Dufour and K. Möllersten, "Nordic net-zero : counterbalancing residual emissions in the context of unevenly distributed BECCS potentials," Climate Policy, 2025.
[44]
A. Mohan et al., "Innovative and cost-effective upgrading of crude biogenic pyrolysis oil using low-cost adsorbents and petroleum ether," Environmental Science and Pollution Research, vol. 32, no. 56, pp. 30723-30747, 2025.
[45]
M.-S. Svanberg Frisinger et al., "CO2-Triggered Sedimentation in Concentrated Dispersions of Aminated Silica for CO2 Capture," ACS Sustainable Chemistry and Engineering, vol. 13, no. 50, pp. 21394-21404, 2025.
[46]
N. Mirzaei et al., "Experiments and kinetic modeling of absorption rates of CO2 into unpromoted K2CO3 solutions at low to high solvent loading," Separation and Purification Technology, vol. 378, 2025.
[47]
N. Mirzaei and M. U. Bäbler, "Kinetic and Mechanistic Study of CO2 Absorption into Vanadium-Promoted Aqueous K2CO3," ACS Sustainable Chemistry and Engineering, vol. 13, no. 42, pp. 18163-18175, 2025.
[48]
D. Yildiz et al., "Performance of Reversible Molten Carbonate Fuel Cell Fuelled by Raw Product Gas from Biomass Gasification," Journal of the Electrochemical Society, vol. 172, no. 9, 2025.
[49]
J. Chen et al., "Investigation on the unsteady characteristics of flow and heat transfer in different channels of turbine blade leading edge," International journal of thermal sciences, vol. 215, 2025.
[50]
M. Dufour et al., "Corporate net-zero : targets do not add up due to scope 2 and 3 emissions," Carbon Management, vol. 16, no. 1, 2025.