Till innehåll på sidan
Till KTH:s startsida

Publikationer

50 senaste publikationerna

[1]
Cabral de Souza, P. H. & Engvall, K. (2027). Bed material aging in industrial-scale fast pyrolysis of biomass: Effects of ash and particle morphology on bio-oil yield and composition. Fuel, 427.
[2]
Bazybek, N., Vicidomini, L., Kantarelis, E., Engvall, K. & Nazir, S. M. (2026). Transition Metal-Based Oxidation Catalysts to Mitigate Methane Emissions from Low-Concentration Sources. ACS Omega, 11(18), 26220-26232.
[3]
Ge, C., Chen, F., Xu, L., Zhang, K., Duwig, C. (2026). Multi-dimensional Evaluation of Chemical Kinetic Mechanisms for Ammonia and Ammonia/Hydrogen Combustion. I Proceedings of the International Conference on Aerospace System Science and Engineering 2025. (s. 171-188). Springer Nature.
[4]
Ameri, A., Duwig, C. & Kusar, H. (2026). Experimental evaluation of triply periodic minimal surface packings for CO2 absorption in carbon capture processes. Chemical Engineering Journal Advances, 27.
[5]
Ameri, A., Duwig, C. & Kusar, H. (2026). Liquid distribution performance of Triply Periodic Minimal Surface packings : Effects of topology, porosity, flow rate and inlet configuration. Chemical engineering research & design, 229, 237-252.
[6]
Suarez-Corredor, A. F., Shao, J., Westerberg, B., Bäbler, M. & Olsson, L. (2026). Influence of catalyst supports on H2-SCR catalysts: A combined experimental and modeling approach including mass transfer. Applied Catalysis B : Environmental, 395.
[7]
Khan, M. N., Ali, S., Alam, S., Rasheed, K., Khan, A. A., Qidwai, M. O. & Ansari, D. (2026). Performance enhancement of microchannel heat sinks using pin fins embedded in the arcuate region of fan-shaped reentrant cavities. International Journal of Heat and Fluid Flow, 120.
[8]
Saxena, A. & Duwig, C. (2026). Efficient peak temperature control using precision cooling: A numerical study of a novel jet-pin-fin hybrid heat sink. Applied Thermal Engineering, 298.
[9]
Palulli, R., Zhang, P., Fooladgar, E., Fredriksson, C., Normann, F. & Duwig, C. (2026). Impact of operating conditions on 𝑁𝑂 formation pathways in conditionsrelevant to 𝐻2-fuelled, high-temperature furnaces for iron ore pelletinduration. International journal of hydrogen energy, 231.
[10]
Zhang, J., Li, S., Zhang, P., Meng, Q. & Zhang, H. (2026). Detonation initiation mode in non-uniform coal particle suspensions subject to an incident blast wave. Combustion and Flame, 288.
[11]
Björkén, D., Toffolo, A., Mesfun, S., Engvall, K., Lindbergh, G., Lagergren, C. (2026). Electrochemical Conditioning of Biomass-Derived Cleaned Product Gases with a Reversible Molten Carbonate Fuel Cell (RMCFC). (Manuskript).
[12]
Hedberg, E. (2026). Selective Hydrogenation of Crotonaldehyde to Butyraldehyde over Pd/Al2O3 catalyst. An alternative to Hydroformylation. .
[13]
Behzadi, A., Faghihi, M., Rolando, D., Duwig, C. & Sadrizadeh, S. (2026). An optimal adaptive control framework for reducing operating costs and enhancing thermal comfort in low-temperature heating systems. Energy Conversion and Management, 356.
[14]
Mirzaei, N. (2026). Carbonate-based solvents for carbon capture (Doktorsavhandling , KTH Royal Institute of Technology, Stockholm, TRITA-CBH-FOU 2026:19). Hämtad från https://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-378619.
[15]
Behzadi, A., Arghand, T., Duwig, C., Li, H. & Sadrizadeh, S. (2026). Dynamic seasonal energy management of borehole thermal energy storage and smart heat pump synergies in fossil-free, ultra-efficient buildings. Applied Energy, 406.
[16]
Jafari, S., Yao, R., Salimi, S. Z., Brandt, L. & Duwig, C. (2026). A novel numerical model for detailed simulation of CO2 capture. International Journal of Heat and Mass Transfer, 260.
[17]
Yao, R., Jafari, S. & Duwig, C. (2026). Intensified turbulent thermal convection with reversible reactive fluid. Energy Conversion and Management, 352.
[18]
Mohan, A., Emmer, Å., Engvall, K. & Jonsson, M. (2026). Recent progress in separation strategies for upgrading bio-oil: mechanisms, challenges and a way forward. Separation and Purification Technology, 392, 137146-137146.
[19]
af Ugglas, S. (2026). Longevity of Diesel Particulate Filters in Heavy-Duty Vehicles (Doktorsavhandling , KTH Royal Institute of Technology, Stockholm, TRITA-CBH-FOU 2026:7). Hämtad från https://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-376472.
[20]
Raza, W., Ansari, D. & Jeong, J. H. (2026). Design and numerical investigation of a hybrid isothermal heat sink with variable-aspect-ratio elliptical pinfins for concentrated photovoltaic modules. Energy Conversion and Management, 351.
[21]
Yawar, A., Mohammadpour, J., Ansari, D., Duwig, C., Bhandari, V. & Salehi, F. (2026). A novel isothermal cooling design for enhanced thermal performance of concentrated photovoltaics. Renewable energy, 257.
[22]
Mohan, A. & Engvall, K. (2026). The role of pressure and steam on pyrolysis of biogenic waste : Value-added commodity products. Fuel, 406B.
[23]
Ma, L., Wang, J., Pu, J. & Yao, R. (2026). Investigation on heat transfer and coherent structures of rotational sweeping impingement jets with different frequencies and angles. International Journal of Heat and Mass Transfer, 255.
[24]
Svanberg Frisinger, M.-S., Bacsik, Z., Ullah, L., Jaworski, A., Iqbal, M. N., Wu, Z. ... Hedin, N. (2025). CO2-Triggered Sedimentation in Concentrated Dispersions of Aminated Silica for CO2 Capture. ACS Sustainable Chemistry and Engineering, 13(50), 21394-21404.
[25]
af Ugglas, S., Finker, P., Ersson, A., Yao, D., Pettersson, L., Kusar, H. (2025). Impact of Reduced Catalytic Activity on Passive Regeneration of Catalyzed Diesel Particulate Filters. Presenterad vid KSAE/SAE 2025 Powertrain, Energy & Lubricants Conference & Exhibition, Busan, South Korea, June 22-25, 2025. SAE International.
[26]
Fernandez I Reixach, P., Chino Mamani, M. S. & Kantarelis, E. (2025). Effect of Cu Addition on the Selectivity of Ni-Based Catalysts for Methylcyclohexane Dehydrogenation. Topics in catalysis, 68(20), 2478-2493.
[27]
Melath, S. P., Dulitz, K., Hauck, M., Swaraj, D., Dahlmann, F., Gerlach, M. ... Wester, R. (2025). Infrared predissociation spectroscopy of cold trapped C2H−(H2) and C2H−(D2). Molecular Physics.
[28]
Mohan, A., Al-Wandi, A., Emmer, Å., Engvall, K., Jonsson, M. (2025). A Separation Strategy for Refining Crude Biogenic Oil Using Phase Separation. Presenterad vid EUBCE 2025, 33rd European Biomass Conference and Exhibition, Valencia, Spain, June 9-12, 2025.
[29]
Mohan, A., Al-Wandi, A., Emmer, Å., Engvall, K. & Jonsson, M. (2025). Innovative and cost-effective upgrading of crude biogenic pyrolysis oil using low-cost adsorbents and petroleum ether. Environmental Science and Pollution Research, 32(56), 30723-30747.
[30]
Dufour, M., Möllersten, K., Lundberg, L. & Kuusela, H. (2025). Corporate net-zero : targets do not add up due to scope 2 and 3 emissions. Carbon Management, 16(1).
[31]
Ma, L., Wang, J., Hu, P. & Yao, R. (2025). Investigation on cooling unsteadiness of trenched film-hole on convex surfaces with mainstream pulsation. Aerospace Science and Technology, 166.
[32]
Ma, L., Zhou, Z., Wang, J. & Yao, R. (2025). Heat transfer and flow characteristics of a novel double wall cooling design embedded by primitive-type triply periodic minimal surface structures. International Journal of Heat and Fluid Flow, 116.
[33]
Ameri, A., Najarnezhadmashhadi, A., Lawal, I. A., Wu, Z., Duwig, C. & Kusar, H. (2025). Comparative study of CO2 capture efficiency using sodium hydroxide and monoethanolamine solutions in a spray column. Atmospheric Environment X, 28.
[34]
Mirzaei, N. & Bäbler, M. U. (2025). Kinetic and Mechanistic Study of CO2 Absorption into Vanadium-Promoted Aqueous K2CO3. ACS Sustainable Chemistry and Engineering, 13(42), 18163-18175.
[35]
Venuti Björkman, J., Karlsson, M., Belkheiri, T., Pettersson, L. & Kantarelis, E. (2025). A study of transient operation in a pilot-scale hydrotreater using real feedstocks. Chemical Engineering Journal, 522.
[36]
Venuti Björkman, J., Lukovicsová, L., Belkheiri, T., Hruby, S. L., Pettersson, L. & Kantarelis, E. (2025). Differences in Apparent Activity of Sulfided NiMo/γ-Al2O3 Hydrotreating Catalysts Elucidated by Dynamic Reactor Modelling. Topics in catalysis, 68(20), 2494-2506.
[37]
Mirzaei, N., Walthert, F., Kantarelis, E. & Bäbler, M. (2025). Experiments and kinetic modeling of absorption rates of CO2 into unpromoted K2CO3 solutions at low to high solvent loading. Separation and Purification Technology, 378.
[38]
Najarnezhadmashhadi, A., Jafari, S., Häggmark, C., Kusar, H. & Duwig, C. (2025). CO2 absorption in pilot-scale multi-nozzle spray towers: CFD and experimental study of flow and mass transfer dynamics. Results in Engineering (RINENG), 27.
[39]
Khosravi, M., Behzadi, A., Duwig, C. & Sadrizadeh, S. (2025). AI-driven hybrid control for hydrogen-integrated microgrids : Probabilistic energy management with vehicle-to-grid. International journal of hydrogen energy, 146.
[40]
Ma, L., Chen, J., Zhou, Z., Wang, J. & Yao, R. (2025). Influence of separation wake induced by convex curvature on unsteady film cooling behaviors with different film-hole configurations. International journal of thermal sciences, 218.
[41]
Pettersson Haag, I. (2025). Coke Characteristics and Oxidation Kinetics on Spent Methylcyclohexane Dehydrogenation Catalysts : A Study Towards Efficient Hydrogen Delivery Using Liquid Organic Hydrogen Carriers. .
[42]
Hruby, S., Chrysafis, P., Kusar, H., Pach, M. & Hittig, H. (2025). An Investigation into Coolant-Related Internal Diesel Injector Deposits from Heavy-Duty Vehicles. ACS Omega, 10(23), 24235-24251.
[43]
Yao, H., Jafari, S. & Duwig, C. (2025). Identification of heat transfer enhancement mechanism for multiple-jet impingement cooling with reversible reactive fluid. Applied Thermal Engineering, 274.
[44]
Chen, J., Yao, R., Ma, L., Wang, J., Wang, X. & Gan, M. (2025). Investigation on the unsteady characteristics of flow and heat transfer in different channels of turbine blade leading edge. International journal of thermal sciences, 215.
[45]
Palulli, R., Zhang, K. & Duwig, C. (2025). Extended proper orthogonal decomposition based investigation of NO formation pathways in a non-premixed, hydrogen-fuelled, gas turbine combustor. Fuel, 392.
[46]
Najarnezhadmashhadi, A., Das Neves, N., Escobar, K. Y. T., Häggmark, C., Karlsson, D., Franzén, P. ... Kusar, H. (2025). Enhancing CO2 capture efficiency in a lab-scale spray tower : An experimental study on flow configurations using potassium carbonate. Chemical engineering research & design, 216, 186-199.
[47]
Ameri, A. (2025). Density, Refractive Index, Electrical Conductivity, pH, and FT-IR and UV-Vis Spectra of Potassium Carbonate-Potassium Bicarbonate-Water System. Journal of Chemical and Engineering Data, 70(2), 766-786.
[48]
Wan, W. (2025). Experimental and Modeling Studies on the Release and Condensation of Inorganics in a Pressurized Biomass Fluidized Bed Gasification Process (Doktorsavhandling , KTH Royal Institute of Technology, Stockholm, TRITA-CBH-FOU 2024:62). Hämtad från https://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-358736.
[49]
Pach Aige, M., Hittig, H., Blomberg, J., Kusar, H. & Hruby, S. (2025). Exploring the formation mechanisms of internal diesel injector deposits : A laboratory study. Fuel, 381(133290).
[50]
Ansari, D., Raza, W., Jeong, J. H. & Kim, K.-Y. (2025). A novel hybrid-composite microchannel heat sink for extreme hotspot mitigation. International journal of thermal sciences, 208.