Kalender

Welcome to the first lecture.

Lecture slides can be downloaded here.

The lecture slides will be a combination of slides from Lecture #1 that three was no time for, and this new set of slides.

Welcome!

Recommended reading for this lecture is

Chapters 6 and 22 from the Alstom network Protection and Automation Guide

Chapter 3 in Digital Protection for Power Systems

The lecture slides can be downloaded here.

Cancelled

Introduction to  and overview of Power system protection.

The suggested reading for this lecture is:

1. Substation Design Application Guide by V. Ayadurai

2. Fundamentals of Power System Protection in The Electrical Engineering Handbook

Lecture slides are available here.

This lecture introduces Substation Automation function and system architectures.

Recommended reading is Chapter 6 of the Substation Automation Handbook.

During this lecture we will also introduce the Helinks tool to be used in part 1 of the Project Assignment.

The lecture slides can be downloaded here

The lecture will be held in the Classroom at Osquldas väg 10, floor 7.

It covers Introduction to IEC 61850 & Communication networks in substations.

Lecture slides available here.

Designing Substation Automation Systems

The lecture goes through a number of examples of designing substation automation systems using the  IEC 61850 standard.

Lab is held at Osquldas väg 10, floor 7.

The focus of the lab is to familiarize yourself with various forms of control of power systems.

No preparations are needed, the lab is concluded with a short presentation of results to the lab administrator.

Lab is held at Osquldas väg 10, floor 7.

The focus of the lab is to familiarize yourself with various forms of control of power systems.

No preparations are needed, the lab is concluded with a short presentation of results to the lab administrator.

Andrea Bonetti of FMTP Power will give a guest lecture on application of the IEC 61850 standard in design of substation automation systems.

Andrea's slides are available here

Lab is held at Osquldas väg 10, floor 7.

The focus of the lab is to familiarize yourself with various forms of control of power systems.

No preparations are needed, the lab is concluded with a short presentation of results to the lab administrator.

Lab is held at Osquldas väg 10, floor 7.

The focus of the lab is to familiarize yourself with various forms of control of power systems.

No preparations are needed, the lab is concluded with a short presentation of results to the lab administrator.

This is a workshop at which students are encouraged to participate and ask questions related to their solution to Project Assignment #1. There will be no lecture or presentation from the teachers, but instead the teachers will be available to answer questions.

The session is held at Osquldas väg 10, floor 7.

Bus leaves at 12.30 from KTH to Upplands Väsby, returning to KTH att approx 16.30/1700

We will visit a recently modernized substation operated by Vattenfall. Due to space limitations, the visit will be done in groups. While one group is at the substation, the remainder of the groups can prepare the project assignment together with course teachers.

This test covers the reading material A, B, C, D, E, F, G & H.

Please see course memo for references.

Suggested reading for this lecture is the IEEE standard C37.1 on SCADA and Automation Systems

Lecture slides can be downloaded Lecture 9 - SCADA Systems.pdf

This lecture is held in the classroom at Osquldas väg 10, floor 7.

Overview of communication systems and protocols

The lecture slides can be downloaded here

The teacher for this lecture is Nicholas Honeth.

Lecture slides can be downloaded here

Lab is held at Osquldas väg 10, floor 7.

The focus of the lab is to familiarize yourself with communication system solutions for power system operation and control.

No preparations are needed, the lab is concluded with a short presentation of results to the lab administrator.

Lab is held at Osquldas väg 10, floor 7.

The focus of the lab is to familiarize yourself with communication system solutions for power system operation and control.

No preparations are needed, the lab is concluded with a short presentation of results to the lab administrator.

This session is held at L52.

Wide Area Monitoring System will be given in the first half part of the session. The second part of the session will be Q&A for project assignment part 2.

The lecture slides can be found here.

Lab is held at Osquldas väg 10, floor 7.

The focus of the lab is to familiarize yourself with communication system solutions for power system operation and control.

No preparations are needed, the lab is concluded with a short presentation of results to the lab administrator.

The lecture slide can be found here.

Lab is held at Osquldas väg 10, floor 7.

The focus of the lab is to familiarize yourself with communication system solutions for power system operation and control.

No preparations are needed, the lab is concluded with a short presentation of results to the lab administrator.

Cybersecurity of SCADA and power automation systems

Recommended racing for this lecture is SCADA communication and security issues.

The lecture slides are available here

This test covers the following parts of the course literature:

I, J, K, L, M & N

Recommended reading for this lecture is reference O.

Recommended reading is references P & Q.

Recommended reading for this lecture is reference R.

This session is held at Osquldas väg 10, floor 7.

At this final seminar, student groups present their project assignments orally to the whole group.

8 groups will be picked at random from the total number of groups to do a project presentation.

Participation is mandatory.

This test covers the following parts of the course literature: O, P, Q & R

Please see course memo for references.