Till KTH:s startsida Till KTH:s startsida
Hands-On Microelectromechanical Systems Engineering
KTH / Course web / Hands-On Microelectromechanical Systems Engineering / News feed

News feed

Log in to your course web

You are not logged in KTH, so we cannot customize the content.

Do you have questions regarding this course?

If you are registered on a current course round, please refer to the Canvas course room. You find the right course room under "Courses" in the personal menu.

If you are not registered, see Course PM for EK2360 or contact your student office or study counsellor.

In the News feed, you find updates for pages, schedule and posts from teachers (when aimed also at earlier registered students).

November 2013
Teacher post UPDATED SCHEDULE OF INTRODUCTORY MEETINGS: ...
by Joachim Oberhammer

UPDATED SCHEDULE OF INTRODUCTORY MEETINGS:

Lecture 2: Thursday, Nov. 7, 15:15-17:00, Q33

Lecture 3: Monday, Nov. 11, 9:15-11:00, Lab 1 (Osquldas väg 10, floor 2, A:213)

Lecture 4: Monday, Nov. 18, 13:15-14:00, Lab 1

Report abuse
Teacher Joachim Oberhammer posted 4 November 2013
 
October 2012
Page Summary; course goals; what is expecting you?
under General

Teacher Joachim Oberhammer created page 9 August 2012

Joachim Oberhammer edited 9 August 2012

BRIEF SUMMARY¶

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.¶

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!¶

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).¶

¶

FURTHER INFORMATION¶

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.¶

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.¶

Course language: English.¶

Course coordinator: Assoc.-Prof. Joachim Oberhammer.¶

A promotional PDF document for the course can be downloaded below (click COURSE PROMOTION).¶

Course office for students: STEX (Osquldas väg 10, ground floor).¶

The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants.¶

For any questions, in particular on the suitability of your background to the course, please contact the course responsible.¶

Joachim Oberhammer edited 9 August 2012

BRIEF SUMMARY

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).

FURTHER INFORMATION

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.

Course language: English.

Course coordinator: Assoc.-Prof. Joachim Oberhammer.

A promotional PDF document for the course can be downloaded below (click COURSE PROMOTION).

Course office for students:  STEX (Osquldas väg 10, ground floor).

The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants.

For any questions, in particular on the suitability of your background to the course, please contact the course responsible.

Joachim Oberhammer edited 9 August 2012

BRIEF SUMMARY

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).

FURTHER INFORMATION

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.

Course language: English.

Course coordinator: Assoc.-Prof. Joachim Oberhammer.

A promotional PDF document for the course can be downloaded below (click COURSE PROMOTION).

Course office for students: STEX (Osquldas väg 10, ground floor).

The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants.

For any questions, in particular on the suitability of your background to the course, please contact the course responsible.

Joachim Oberhammer edited 9 August 2012

BRIEF SUMMARY

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).

FURTHER INFORMATION

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.

Course language: English.

Course coordinator: Assoc.-Prof. Joachim Oberhammer.

A promotional PDF document for the course can be downloaded below (click COURSE PROMOTION)Official course description: Course description of 2010.

Course office for students: STEX (Osquldas väg 10, ground floor).

Course work: The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants.

For any questions, in particular on the suitability of your background to the course, please contact the course responsiblecoordinator.

Joachim Oberhammer edited 9 August 2012

BRIEF SUMMARY

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).

FURTHER INFORMATION

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.

Course language: English.

Course coordinator: Assoc.-Prof. Joachim Oberhammer.

Official course description: Course description of 2010.

Course office for students: STEX (Osquldas väg 10, ground floor).

Course workcontent: The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants.

The student will be able to to design thier own microsystem devices using simulation and CAD tools, to fabricate the devices in a clean-room laboratory, to characterize the devices, and to analyse failure mechanisms as well as propose design improvements.¶

The course starts with lectures introducing the student to MEMS design tools, and providing them with specifications of the real-world problems they have to solve.¶

Then, the students will work in groups of 2–3, develop device concepts, and verify these using state-of-the art FEM simulation tools, and then design the devices with CAD software.¶

In the next step, the students will fabricate their own devices with state-of-the-art micromachining/semiconductor manufacturing tools in the the KTH clean-room laboratory.¶

Afterwards, the students will evaluate their devices by characterizing them with various test setups to find out which of their designs has best performance according to the given specifications.¶

In the final step, the students will analyze the failure mechanisms of their devices, and have to propose design improvements for a potential next development cycle.¶

For any questions, in particular on the suitability of your background to the course, please contact the course coordinator.

Joachim Oberhammer edited 9 August 2012

BRIEF SUMMARY

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).

FURTHER INFORMATION

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.

Course language: English.

Course coordinator: Assoc.-Prof. Joachim Oberhammer.

Official course description: COriginal course description of 2010.

Course office for students: STEX (Osquldas väg 10, ground floor).

Course content: The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants.

The student will be able to to design thier own microsystem devices using simulation and CAD tools, to fabricate the devices in a clean-room laboratory, to characterize the devices, and to analyse failure mechanisms as well as propose design improvements.

The course starts with lectures introducing the student to MEMS design tools, and providing them with specifications of the real-world problems they have to solve.

Then, the students will work in groups of 2–3, develop device concepts, and verify these using state-of-the art FEM simulation tools, and then design the devices with CAD software.

In the next step, the students will fabricate their own devices with state-of-the-art micromachining/semiconductor manufacturing tools in the the KTH clean-room laboratory.

Afterwards, the students will evaluate their devices by characterizing them with various test setups to find out which of their designs has best performance according to the given specifications.

In the final step, the students will analyze the failure mechanisms of their devices, and have to propose design improvements for a potential next development cycle.

For any questions, in particular on the suitability of your background to the course, please contact the course coordinator.

Joachim Oberhammer edited 9 August 2012

BRIEF SUMMARY

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).

FURTHER INFORMATION

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.

Course language: English.

Course coordinator: Assoc.-Prof. Joachim Oberhammer.

Official course description: Original course description.

Course office for students: STEX (Osquldas väg 10, ground floor).

Course content:¶

The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants.

The student will be able to to design thier own microsystem devices using simulation and CAD tools, to fabricate the devices in a clean-room laboratory, to characterize the devices, and to analyse failure mechanisms as well as propose design improvements.

The course starts with lectures introducing the student to MEMS design tools, and providing them with specifications of the real-world problems they have to solve.

Then, the students will work in groups of 2–3, develop device concepts, and verify these using state-of-the art FEM simulation tools, and then design the devices with CAD software.

In the next step, the students will fabricate their own devices with state-of-the-art micromachining/semiconductor manufacturing tools in the the KTH clean-room laboratory.

Afterwards, the students will evaluate their devices by characterizing them with various test setups to find out which of their designs has best performance according to the given specifications.

In the final step, the students will analyze the failure mechanisms of their devices, and have to propose design improvements for a potential next development cycle.

For any questions, in particular on the suitability of your background to the course, please contact the course coordinator.

Joachim Oberhammer edited 9 August 2012

BRIEF SUMMARY

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).

FURTHER INFORMATION

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.

Course language: English.

Course coordinator: Assoc.-Prof. Joachim Oberhammer.

Official course description: Original course description.

Course office for students: STEX (Osquldas väg 10, ground floor).

Course content:

The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants.

The student will be able to to design thier own microsystem devices using simulation and CAD tools, to fabricate the devices in a clean-room laboratory, to characterize the devices, and to analyse failure mechanisms as well as propose design improvements.

The course starts with lectures introducing the student to MEMS design tools, and providing them with specifications of the real-world problems they have to solve.

Then, the students will work in groups of 2–3, develop device concepts, and verify these using state-of-the art FEM simulation tools, and then design the devices with CAD software.

In the next step, the students will fabricate their own devices with state-of-the-art micromachining/semiconductor manufacturing tools in the the KTH clean-room laboratory.

Afterwards, the students will evaluate their devices by characterizing them with various test setups to find out which of their designs has best performance according to the given specifications.

In the final step, the students will analyze the failure mechanisms of their devices, and have to propose design improvements for a potential next development cycle.

For any questions, in particular on the suitability of your background to the course, please contact the course coordinator.

Joachim Oberhammer edited 9 August 2012

BRIEF SUMMARY

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).

FURTHER INFORMATION

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.

Course language: English.

Course coordinator: Assoc.-Prof. Joachim Oberhammer.

Official course description: Original course description.

Course office for students: STEX (Osquldas väg 10, ground floor).

Course content:¶ The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants.¶ The student will be able to to design thier own microsystem devices using simulation and CAD tools, to fabricate the devices in a clean-room laboratory, to characterize the devices, and to analyse failure mechanisms as well as propose design improvements.¶ The course starts with lectures introducing the student to MEMS design tools, and providing them with specifications of the real-world problems they have to solve.¶ Then, the students will work in groups of 2–3, develop device concepts, and verify these using state-of-the art FEM simulation tools, and then design the devices with CAD software.¶ In the next step, the students will fabricate their own devices with state-of-the-art micromachining/semiconductor manufacturing tools in the the KTH clean-room laboratory.¶ Afterwards, the students will evaluate their devices by characterizing them with various test setups to find out which of their designs has best performance according to the given specifications.¶ In the final step, the students will analyze the failure mechanisms of their devices, and have to propose design improvements for a potential next development cycle.

For any questions, in particular on the suitability of your background to the course, please contact the course coordinator.

Joachim Oberhammer edited 9 August 2012

BRIEF SUMMARY

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).

FURTHER INFORMATION

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.

Course language: English.

Course coordinator: Assoc.-Prof. Joachim Oberhammer, KTH School of electrical Engineering, Microsystem Technology Laboratory.¶

Supervision: The progress of the work will be supervised by the course responsible. Additional, 2 PhD students tutor the course participants during the design phase, 2 PhD students will tutor during the fabrication phase, and 1 PhD student will tutor during the evaluation phase.¶

Place of the course events: The first (compulsory!) meeting and the final project presentations are held in lecture halls as specified in the course schedule (see link to the right), the other meetings, lectures, review meetings, and the design work will be carried out in the students lab at KTH's downtown campus, Osquldas väg 10, 2nd floor, room A:213. Students will get unrestricted access to that lab during the project work. The fabrication will be done in KTH's cleanroom laboratory in Kista (Isafjordsgatan 22-24). The evaluation will be done at the Microsystem Technology Laboratory at the KTH downtown campus, Osquldas väg 10, 5th floor
.

Official course description: Original course description.

Course office for students: STEX (Osquldas väg 10, ground floor).

Course content: The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants. The student will be able to to design thier own microsystem devices using simulation and CAD tools, to fabricate the devices in a clean-room laboratory, to characterize the devices, and to analyse failure mechanisms as well as propose design improvements. The course starts with lectures introducing the student to MEMS design tools, and providing them with specifications of the real-world problems they have to solve. Then, the students will work in groups of 2–3, develop device concepts, and verify these using state-of-the art FEM simulation tools, and then design the devices with CAD software. In the next step, the students will fabricate their own devices with state-of-the-art micromachining/semiconductor manufacturing tools in the the KTH clean-room laboratory. Afterwards, the students will evaluate their devices by characterizing them with various test setups to find out which of their designs has best performance according to the given specifications. In the final step, the students will analyze the failure mechanisms of their devices, and have to propose design improvements for a potential next development cycle.

For any questions, in particular on the suitability of your background to the course, please contact the course coordinator.

Joachim Oberhammer edited 10 August 2012

BRIEF SUMMARY

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).

FURTHER INFORMATION

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.

Course language: English.

Course coordinator: Assoc.-Prof. Joachim Oberhammer, KTH School of electrical Engineering, Microsystem Technology Laboratory.

Supervision: The progress of the work will be supervised by the course responsible. Additional, 2 PhD students tutor the course participants during the design phase, 2 PhD students will tutor during the fabrication phase, and 1 PhD student will tutor during the evaluation phase.

Place of the course events: The first (compulsory!) meeting and the final project presentations are held in lecture halls as specified in the course schedule (see link to the right), the other meetings, lectures, review meetings, and the design work will be carried out in the students lab at KTH's downtown campus, Osquldas väg 10, 2nd floor, room A:213. Students will get unrestricted access to that lab during the project work. The fabrication will be done in KTH's cleanroom laboratory in Kista (Isafjordsgatan 22-24). The evaluation will be done at the Microsystem Technology Laboratory at the KTH downtown campus, Osquldas väg 10, 5th floor.

Official course description: Original course description.

Course office for students: STEX (Osquldas väg 10, ground floor).

Course content: The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants. The student will be able to to design thier own microsystem devices using simulation and CAD tools, to fabricate the devices in a clean-room laboratory, to characterize the devices, and to analyse failure mechanisms as well as propose design improvements. The course starts with lectures introducing the student to MEMS design tools, and providing them with specifications of the real-world problems they have to solve. Then, the students will work in groups of 2–3, develop device concepts, and verify these using state-of-the art FEM simulation tools, and then design the devices with CAD software. In the next step, the students will fabricate their own devices with state-of-the-art micromachining/semiconductor manufacturing tools in the the KTH clean-room laboratory. Afterwards, the students will evaluate their devices by characterizing them with various test setups to find out which of their designs has best performance according to the given specifications. In the final step, the students will analyze the failure mechanisms of their devices, and have to propose design improvements for a potential next development cycle.

For any questions, in particular on the suitability of your background to the course, please contact the course coordinator.

¶

Return to main course page.¶

Joachim Oberhammer edited 10 August 2012

BRIEF SUMMARY

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).

FURTHER INFORMATION

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.

Course language: English.

Course coordinator: Assoc.-Prof. Joachim Oberhammer, KTH School of electrical Engineering, Microsystem Technology Laboratory.

Supervision: The progress of the work will be supervised by the course responsible. Additional, 2 PhD students tutor the course participants during the design phase, 2 PhD students will tutor during the fabrication phase, and 1 PhD student will tutor during the evaluation phase.

Place of the course events: The first (compulsory!) meeting and the final project presentations are held in lecture halls as specified in the course schedule (see link to the right), the other meetings, lectures, review meetings, and the design work will be carried out in the students lab at KTH's downtown campus, Osquldas väg 10, 2nd floor, room A:213. Students will get unrestricted access to that lab during the project work. The fabrication will be done in KTH's cleanroom laboratory in Kista (Isafjordsgatan 22-24). The evaluation will be done at the Microsystem Technology Laboratory at the KTH downtown campus, Osquldas väg 10, 5th floor.

Official course description: Original course description.

Course office for students: STEX (Osquldas väg 10, ground floor).

Course content: The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants. The student will be able to to design thier own microsystem devices using simulation and CAD tools, to fabricate the devices in a clean-room laboratory, to characterize the devices, and to analyse failure mechanisms as well as propose design improvements. The course starts with lectures introducing the student to MEMS design tools, and providing them with specifications of the real-world problems they have to solve. Then, the students will work in groups of 2–3, develop device concepts, and verify these using state-of-the art FEM simulation tools, and then design the devices with CAD software. In the next step, the students will fabricate their own devices with state-of-the-art micromachining/semiconductor manufacturing tools in the the KTH clean-room laboratory. Afterwards, the students will evaluate their devices by characterizing them with various test setups to find out which of their designs has best performance according to the given specifications. In the final step, the students will analyze the failure mechanisms of their devices, and have to propose design improvements for a potential next development cycle.

For any questions, in particular on the suitability of your background to the course, please contact the course coordinator.

For course material, schedule, etc. for the current academic year click at the items of the respective year in the menu to the right. Most items are only visible if you are logged-in/registered to this course.¶

¶

Return to main course page.

Joachim Oberhammer edited 25 October 2012

BRIEF SUMMARY

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).

FURTHER INFORMATION

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.

Course language: English.

Course coordinator: Assoc.-Prof. Joachim Oberhammer, KTH School of electrical Engineering, Microsystem Technology Laboratory.

Supervision: The progress of the work will be supervised by the course responsible. Additional, 2 PhD students tutor the course participants during the design phase, 2 PhD students will tutor during the fabrication phase, and 1 PhD student will tutor during the evaluation phase.

Place of the course events: The first (compulsory!) meeting and the final project presentations are held in lecture halls as specified in the course schedule (see link to the right), the other meetings, lectures, review meetings, and the design work will be carried out in the students lab at KTH's downtown campus, Osquldas väg 10, 2nd floor, room A:213. Students will get unrestricted access to that lab during the project work. The fabrication will be done in KTH's cleanroom laboratory in Kista (Isafjordsgatan 22-24). The evaluation will be done at the Microsystem Technology Laboratory at the KTH downtown campus, Osquldas väg 10, 5th floor.

Official course description: Original course description. in the KTH databas, last update 2010. (information on the course on KTH Social is more frequently updated)

Course office for students: STEX (Osquldas väg 10, ground floor).

Course content: The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants. The student will be able to to design thier own microsystem devices using simulation and CAD tools, to fabricate the devices in a clean-room laboratory, to characterize the devices, and to analyse failure mechanisms as well as propose design improvements. The course starts with lectures introducing the student to MEMS design tools, and providing them with specifications of the real-world problems they have to solve. Then, the students will work in groups of 2–3, develop device concepts, and verify these using state-of-the art FEM simulation tools, and then design the devices with CAD software. In the next step, the students will fabricate their own devices with state-of-the-art micromachining/semiconductor manufacturing tools in the the KTH clean-room laboratory. Afterwards, the students will evaluate their devices by characterizing them with various test setups to find out which of their designs has best performance according to the given specifications. In the final step, the students will analyze the failure mechanisms of their devices, and have to propose design improvements for a potential next development cycle.

For any questions, in particular on the suitability of your background to the course, please contact the course coordinator.

For course material, schedule, etc. for the current academic year click at the items of the respective year in the menu to the right. Most items are only visible if you are logged-in/registered to this course.

Return to main course page.

Joachim Oberhammer edited 25 October 2012

BRIEF SUMMARY

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).

Promotional flyer to the course of 2012¶

FURTHER INFORMATION

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.

Course language: English.

Course coordinator: Assoc.-Prof. Joachim Oberhammer, KTH School of electrical Engineering, Microsystem Technology Laboratory.

Supervision: The progress of the work will be supervised by the course responsible. Additional, 2 PhD students tutor the course participants during the design phase, 2 PhD students will tutor during the fabrication phase, and 1 PhD student will tutor during the evaluation phase.

Place of the course events: The first (compulsory!) meeting and the final project presentations are held in lecture halls as specified in the course schedule (see link to the right), the other meetings, lectures, review meetings, and the design work will be carried out in the students lab at KTH's downtown campus, Osquldas väg 10, 2nd floor, room A:213. Students will get unrestricted access to that lab during the project work. The fabrication will be done in KTH's cleanroom laboratory in Kista (Isafjordsgatan 22-24). The evaluation will be done at the Microsystem Technology Laboratory at the KTH downtown campus, Osquldas väg 10, 5th floor.

Official course description: Original course description in the KTH databas, last update 2010. (information on the course on KTH Social is more frequently updated)

Course office for students: STEX (Osquldas väg 10, ground floor).

Course content: The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants. The student will be able to to design thier own microsystem devices using simulation and CAD tools, to fabricate the devices in a clean-room laboratory, to characterize the devices, and to analyse failure mechanisms as well as propose design improvements. The course starts with lectures introducing the student to MEMS design tools, and providing them with specifications of the real-world problems they have to solve. Then, the students will work in groups of 2–3, develop device concepts, and verify these using state-of-the art FEM simulation tools, and then design the devices with CAD software. In the next step, the students will fabricate their own devices with state-of-the-art micromachining/semiconductor manufacturing tools in the the KTH clean-room laboratory. Afterwards, the students will evaluate their devices by characterizing them with various test setups to find out which of their designs has best performance according to the given specifications. In the final step, the students will analyze the failure mechanisms of their devices, and have to propose design improvements for a potential next development cycle.

For any questions, in particular on the suitability of your background to the course, please contact the course coordinator.

For course material, schedule, etc. for the current academic year click at the items of the respective year in the menu to the right. Most items are only visible if you are logged-in/registered to this course.

Return to main course page.

Joachim Oberhammer edited 25 October 2012

BRIEF SUMMARY

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).

Promotional flyer to the course of 2012

In recent course runs, the students had to design:¶


* 2010: micro-optical switch for fiber-optic telecommunication networks
* 2011: micro-optical switch for fiber-optic telecommunication networks
* 2012: micro-gripper for manipulating cells

FURTHER INFORMATION

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.

Course language: English.

Course coordinator: Assoc.-Prof. Joachim Oberhammer, KTH School of electrical Engineering, Microsystem Technology Laboratory.

Supervision: The progress of the work will be supervised by the course responsible. Additional, 2 PhD students tutor the course participants during the design phase, 2 PhD students will tutor during the fabrication phase, and 1 PhD student will tutor during the evaluation phase.

Place of the course events: The first (compulsory!) meeting and the final project presentations are held in lecture halls as specified in the course schedule (see link to the right), the other meetings, lectures, review meetings, and the design work will be carried out in the students lab at KTH's downtown campus, Osquldas väg 10, 2nd floor, room A:213. Students will get unrestricted access to that lab during the project work. The fabrication will be done in KTH's cleanroom laboratory in Kista (Isafjordsgatan 22-24). The evaluation will be done at the Microsystem Technology Laboratory at the KTH downtown campus, Osquldas väg 10, 5th floor.

Official course description: Original course description in the KTH databas, last update 2010. (information on the course on KTH Social is more frequently updated)

Course office for students: STEX (Osquldas väg 10, ground floor).

Course content: The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants. The student will be able to to design thier own microsystem devices using simulation and CAD tools, to fabricate the devices in a clean-room laboratory, to characterize the devices, and to analyse failure mechanisms as well as propose design improvements. The course starts with lectures introducing the student to MEMS design tools, and providing them with specifications of the real-world problems they have to solve. Then, the students will work in groups of 2–3, develop device concepts, and verify these using state-of-the art FEM simulation tools, and then design the devices with CAD software. In the next step, the students will fabricate their own devices with state-of-the-art micromachining/semiconductor manufacturing tools in the the KTH clean-room laboratory. Afterwards, the students will evaluate their devices by characterizing them with various test setups to find out which of their designs has best performance according to the given specifications. In the final step, the students will analyze the failure mechanisms of their devices, and have to propose design improvements for a potential next development cycle.

For any questions, in particular on the suitability of your background to the course, please contact the course coordinator.

For course material, schedule, etc. for the current academic year click at the items of the respective year in the menu to the right. Most items are only visible if you are logged-in/registered to this course.

Return to main course page.

Joachim Oberhammer edited 25 October 2012

BRIEF SUMMARY

The course is designed as a “hands-on” project course for students who would like to deepen their understanding of nano/microelectromachnical systems (NEMS/MEMS), by actively designing, fabricating and evaluating different microacuator concepts.

The course targets MSc level students, preferably with background in Electrical Engineering, Mechanical Engineering, or Engineering Physics. Pre-knowledge in microsystems, nanotechnology, or semiconductor technology is advantageous for some course parts, for instance the fabrication, but not necessary at all. General understanding of physics, and curiosity for the application of physical effects on a micro/nano-scale, is the best starting point for designing your own moving microsystem!

This course is given annually, in the 2nd period of every autumn term at KTH (HT-P2; October to December).

Promotional flyer to the course of 2012

 ¶

In recent course runs, the students had to design:


* 2010: micro-optical switch for fiber-optic telecommunication networks
* 2011: micro-optical switch for fiber-optic telecommunication networks
* 2012: micro-gripper for manipulating cells
 ¶

 

FURTHER INFORMATION

Course participants: Typically, 20% of the students are PhD students. Under certain circumstances, PhD students may create and carry out their own task in the world of microsystem technology.

Results of previous course evaluation: During 2011, 14 students took the course, of which 4 were PhD students. Course evaluation results from 2011 (only given for MSc students): 30% of the students consider the course as among the top 10% of KTH's courses, and 70% of the students consider the course as among the top 25% of KTH's courses.

Course language: English.

Course coordinator: Assoc.-Prof. Joachim Oberhammer, KTH School of electrical Engineering, Microsystem Technology Laboratory.

Supervision: The progress of the work will be supervised by the course responsible. Additional, 2 PhD students tutor the course participants during the design phase, 2 PhD students will tutor during the fabrication phase, and 1 PhD student will tutor during the evaluation phase.

Place of the course events: The first (compulsory!) meeting and the final project presentations are held in lecture halls as specified in the course schedule (see link to the right), the other meetings, lectures, review meetings, and the design work will be carried out in the students lab at KTH's downtown campus, Osquldas väg 10, 2nd floor, room A:213. Students will get unrestricted access to that lab during the project work. The fabrication will be done in KTH's cleanroom laboratory in Kista (Isafjordsgatan 22-24). The evaluation will be done at the Microsystem Technology Laboratory at the KTH downtown campus, Osquldas väg 10, 5th floor.

Official course description: Original course description in the KTH databas, last update 2010. (information on the course on KTH Social is more frequently updated)

Course office for students: STEX (Osquldas väg 10, ground floor).

Course content: The course consists of three introductory lectures (there the dates for the lectures 2 and 3 will be decided at the first meeting) followed by the course work, which is framed by weekly progress meetings with the course responsible and his teaching assistants. The student will be able to to design thier own microsystem devices using simulation and CAD tools, to fabricate the devices in a clean-room laboratory, to characterize the devices, and to analyse failure mechanisms as well as propose design improvements. The course starts with lectures introducing the student to MEMS design tools, and providing them with specifications of the real-world problems they have to solve. Then, the students will work in groups of 2–3, develop device concepts, and verify these using state-of-the art FEM simulation tools, and then design the devices with CAD software. In the next step, the students will fabricate their own devices with state-of-the-art micromachining/semiconductor manufacturing tools in the the KTH clean-room laboratory. Afterwards, the students will evaluate their devices by characterizing them with various test setups to find out which of their designs has best performance according to the given specifications. In the final step, the students will analyze the failure mechanisms of their devices, and have to propose design improvements for a potential next development cycle.

For any questions, in particular on the suitability of your background to the course, please contact the course coordinator.

For course material, schedule, etc. for the current academic year click at the items of the respective year in the menu to the right. Most items are only visible if you are logged-in/registered to this course.

Return to main course page.

 
  • Hands-On Microelectromechanical Systems Engineering
EK2360 | 7.5 credits
Post archive Rounds and groups Page overview Show content by tags
  • Course overview
  • News feed
  • Schedule
  • Kursutveckling
    • Kursdata & kursanalys
    • Kurs-PM (historik)
  • Summary; course goals; what is expecting you?
  • Targeted students and prerequisites
  • Course content, detailed activities, course material
  • Previous year's projects
  • Student feedback (course evaluation)
  • Locations of the course activities
  • Supervision
  • Examination
  • Other information
  • Course syllabus etc
  • Course wiki

KTH

  • Study at KTH
  • Research
  • Cooperation
  • About KTH
  • Student at KTH
  • Alumni
  • KTH Intranet

Organisation

  • KTH Library
  • KTH Schools
  • Competence centres
  • President and management
  • University Administration

Services

  • Timetables
  • Course and programme directory
  • Course, programme and group webs
  • Learning management system (Canvas)
  • Webmail

Contact

KTH Royal Institute of Technology
SE-100 44 Stockholm
Sweden
+46 8 790 60 00

  • Contact KTH
  • Work at KTH
  • Press and media
  • About KTH website